Need help identifying a part.

Similar Questions

• Help identify the part CLX-3180

  Hi, I have a printer CLX-3180. He had a few small metal object stuck in it and my repair shop says that the part marked in red must be replaced because now he needs assistance to run (it does not correctly turn by itself). I really want to throw this printer just as it's a recent purchase and I have the new ink there. Could someone help me identify the part, possibly with the part number? Thank you!

  

  Hello

  This forum deals with HP products.

  I would say check with TeamViewer, they know probably their best product

  http://www.Samsung.com/us/support/contact

• Need help identifying the drivers on new installation of Windows

  Hello

  I installed a new hard drive on my laptop and installed Windows 7 from iso dvd.
  Problem is that I need to connect to the internet to update the drivers, but drivers Ethernet and network must be updated before they will work.
  Even more, when I go to the Windows Device Manager and click Properties for the device, it does not show the manufacturer of the device, Details of the driver or any other identifying information that would allow me to use another computer to download the drivers on a CD and install it on my laptop.
  Date of manufacture of bridge 01/06/2012
  model number ne56r12u
  Thank you
  William

  William

  GO to the gateway > download network on a USB port drivers > install on gateway

  If you want to know what they are go to the Device Manager (start > Search > Device Manager) right-click on the missing driver > properties > details > use the pull down > find the hardware id > google (see shears)

  

  

• Need help identifying network map

  I can't find the name of this network adapter:

  DP/N: 0003710 T-12463-043-05:08

  on the front a sticker with:

  15013 A08922-001 00D0B77E6E3B

  I would appreciate the help.

  Hi BaasjeBaas,

  If you talk about the card as shown in the image below:

  

  It's a DELL 10/100Mbit network PCI adapter

  If you have any other questions answer the same thread.

• Need help finding parts for upgrading pc?

  Hi I want to upgrade my pc and I know this is old, but I need help to find parts I want to improve everyting.

  Here is my pc (hp media center m7260.se desktop pc units). Please I need help.

  Yes, this processor will work with the material. "But the opinion States: currently, item can be shipped only within the United States.

  Did you read the links (information and motherboard) that lasvegaswireman posted for you?

  Micro-ATX: 24.4 cm X 24.4 cm

  Buy a new motherboard will automatically end the use of the current operating system (ie the XP OS).

• I received an update on your part 10/11/10 and now my laptop will not boot in place! I need HELP.

  I received an update on your part 10/11/10 and now my laptop will not boot in place!  I need help.

  Hi bobbymh,

  -Do you happen to remember the update has been installed?

  -You receive an error message when you try to start the computer?

  Follow the steps below:

  Method 1:

   

  Try to start the computer using the last good known Configuration and check if you can successfully start.

   

  For instructions, see How to start your computer by using last good Configuration known as Windows XP .

  Method 2:

  Perform the system restore from SafeMode to a restore point prior to the show and check if this solves the problem.

  See to run the system in safe mode restore

  See also How to restore Windows XP to a previous state

  Method 3:

   

  Follow the steps listed in the following article:

  How to fix a computer that does not start

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Need help to identify the type of object in the loop of pl/sql

  Hello

  I need help to identify the Type of object declared beneath a procedure as shown below:

  I need to pass the parameter to the procedure as a TYPE of OBJECT and also refer to variables of Type Object in a loop

  create or replace type TEST_VALIDATION_REC is RECORD (order_num varchar2 (30),)

  number of inventory_item_id

  reserved_YN varchar2 (1).

  error_flag varchar2 (1).

  Error_message varchar2 (2000)

  );

  CREATE OR REPLACE TYPE VALD_TBL AS VARRAY (10000) OF TEST_VALIDATION_REC;

  PROCEDURE ADD_TO_ORD)

  p_lot_number_list IN VALD_TBL,

  p_ord_number IN Varchar2,

  p_user_id in NUMBER: = fnd_profile.value ('USER_ID'),-change 1.10

  p_responsibility_id in NUMBERS: = fnd_profile.value ('RESP_ID'),-change 1.10

  p_application_id IN VARCHAR2: = 'PO',-change 1.10

  x_error_flag OUT Varchar2,

  x_error_msg OUT Varchar2

  )

  In the above procedure, I had the VALD_TBL. Is it OK?

  And how in the loop if the records if I use:

  FOR indx1 IN 1.p_lot_number_list. COUNTY

  LOOP

  BEGIN

  SELECT

  inventory_item_id

  IN

  ln_item_id

  Of

  dummy_lot_tab

  WHERE

  lot_number = p_lot_number_list (indx1); - > how direct the item here?

  EXCEPTION

  WHILE OTHERS THEN

  ln_item_id: = NULL;

  END;

  Records are PL/SQL objects.  They are not the SQL objects.  You can create a SQL TYPE (schema level) as a collection (variable-tables only, tables nested).

  So therefore your first statement is syntactically incorrect

  CREATE OR REPLACE TYPE TEST_VALIDATION_REC IS RECORD
  (order_num VARCHAR2(30),
  inventory_item_id NUMBER,
  reserved_YN VARCHAR2(1),
  error_flag VARCHAR2(1),
  Error_message VARCHAR2(2000)
  );
  

  You must put in an anonymous PL/SQL block or the stored procedure

  DECLARE
  
     TYPE test_validation_rec IS RECORD
     (
      order_num VARCHAR2(30),
      inventory_item_id NUMBER,
      reserved_YN VARCHAR2(1),
      error_flag VARCHAR2(1),
      error_message VARCHAR2(2000)
     );
  
     TYPE vald_tbl iS VARRAY(10000) OF test_validation_rec;
  
     lv_tbl vald_tbl;
  
  BEGIN
  
     lv_tbl := vald_tbl();
    -- insert your code here 
  
  END;
  

• I can't save my CS3 because I wonder to identify an older version with serial number which I can't provide. I need help!

  I can't save my CS3 using its serial number. To do this, I wonder to identify an older version with serial number which I can't provide. I desperately need help.

  Robert Gordon

  You can follow the instructions here: PS CS3: cannot save on PC

  If your old product is not on the list, nor is your serial number for it. If you need to reinstall on a new system, and the CS3 upgrade wants a qualification series, it's bad. These series are of a value of $$$ and no registration or registration request in trouble.

  Gene

• Fs9 not opening - identified problem but need help repair

  I want to thank you in advance for your time. I am trying to install and play flight sim 2004 on windows 7 - a x 64 sys - and when I open fs9.exe splash screen or anything really fails to display.

  I think that is the problem, is that there is no record of FS9, under the %appdata%\Windows\ that basically, I need help trying to solve. Is there anything I can download to replace this file? Or am I just looking in the wrong place.

  Also, I installed it in a different directory, not the directory Program Files (x 86) but rather just C:\FlightSim\

  Hi Jordan,.

  The game does not appear to be installed according to the description of your problem.

  I suggest you log in as administrator or right click on fs9.exe file and run as administrator.

  I think that this is precisely the reason why the FS9 folder does not appear in c:\users\explore \appdata\local\Microsoft\windows\game.

  If this does not work, I suggest that you look into other aspects as well. Follow the steps below.

  Method 1:

  Update display drivers . The flash on the screen could also be because the display drivers are not updated. I would recommend you visit the manufacturer, download and install the latest display drivers for windows 7.

  Method 2:

  I suggest to disable UAC and then try to install the game.

  Note: User Account Control (UAC) can help prevent your computer from unauthorized changes. UAC notifies you when changes will be made to your computer that require administrator-level permissions. These types of changes can affect the security of your computer or can affect settings for other people who use the computer. We recommend that you leave UAC to help your computer course.

  Method 3:

  Temporarily disable all security software and try to install.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  If the problem persists, then I suggest that you post the question in the Microsoft Flight Simulator Games Forum for further assistance.

  http://www.fsinsider.com/

  FOR INFO:

  Flight Simulator 2004: Known video issues
  http://support.Microsoft.com/kb/823628

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Need help to diagnose the regular system analysis on iMac - processors maxed out

  I need help to identify the cause of a problem that occurs at least 2 - 3 times per day using my iMac (27-inch, mid 2010) running 10.11.5.

  I will use my iMac and then all at once things will start to really trolling. To the point of being completely unusable. Even if I'm able to move my cursor, then click to drag the windows around the screen nothing does really.

  I have iStat menus running so that can see graphics in my menu bar that all 4 cores are completely overfished. Occasionally, I was fast enough to launch the activity monitor to try to see what applications / services are responsible for, the use of % CPU column is completely empty of values, so I can't identify the culprits in a reliable way. I try to keep that column sorted by % CPU use in the hope that he could reveal something and normally it's the kernel_task who is up there.

  I use a Wacom Bamboo dated Tablet (MTE - 450 has) instead of a mouse, and at one point, I was convinced the pilot of PenTabletDrive it is based on was to blame. I contacted Wacom on this subject, and although there is no known issues they pointed out that although the latest drivers will allow me to use the tablet that they no longer support older devices. I was wondering if there was a problem of communication between the device and a driver that is no longer supported. I installed the latest driver supported for my tablet, but the problems persist.

  It may be interesting to note that, when my computer is in this semi-frozen state, I am able to launch the window enough force and quit all open applications leaving me with only the Finder. I guess that means that there are none of my apps running and it is probably one of the services. If I restart the Finder system grinds to a completely enclosed holt.

  I hope someone can let me know what I can find in the Console or elsewhere to help me finally zero in on what is to blame. I can share a log if that helps.

  Thank you in advance!

  Information that might be useful:

  Kept by I tend to be running: Adobe InDesign, Photoshop, Acrobat (all CC 2015), Mail, Safari with several tabs & Dropbox sync constantly.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• Tecra R840 - need help for installing the SSD

  Hello

  Sorry, again, but I really need help with that?
  My new ssd (arriving in a few days) is a Plextor M5P which is 7 mm thick! My Tecra R840-16J have a thickness 9.5 mm HDD and what I've seen is no caddy!
  I would be grateful all the tricks for installing the ssd drive in my Tecra!

  Thanks for your time,

  Paulo

  Hello Paulo

  As far as I know that some models are available with drive HARD and some with SSD these models with SSD have small SSD support. SSD is fixed by 4 screws in this medium.

  I put t really know how to help you now. Maybe you should contact the nearest Toshiba service provider and ask for help. I think they can check the part number of this door - or maybe order one for you.

• HP 15-f209wm with Intel Celero: need help with a unusual amenities. Install windows 7 on a new computer windows 10.

  Hello
  
  I am really puzzled here and need help you guys!
  
  A friend of mine, who is not computer savy is used to windows 7 and would like to 'return' in Windows 7 to a windows 10.
  She recently bought a new computer:
  Black HP 15.6 "15-f209wm with Intel Celeron N2840 4 GB memory 500 GB (windows 10)

  And had me working on it to install it as a Windows 7.
  The problem that I didn't forsee is that after I installed wiondows 7 Nothing worked because all the installed drivers were too 'new' for the Windows 7 operating system at least that is what I think the problem is.

  The main thing that doesn't work is the USB ports and Wifi,
  and I cannot find drivers to make this 'connection', this 'bridge' of sorts between Windows 7 operating system and the hardware inside the computer.  And I can't find solutions on the net!

  An idea that I'm trying is to copy and paste drivers from another computer Windows 7 HP, on it. But I don't know if that's going to walk.

  I am really confused with this and need your expertise!
  
  We thank you in advance.

  * Note *.
  This computer has not been upgraded from a previous version of Windows.
  I tried the Driver Booster to see if it would be the auto scan, detect and install fix it but it didn't.
  I got the Lan/Ethernet is finally working.

  Hello:

  This driver installs usb, not the chipset driver controllers... (the last driver that I posted on my first answer).

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/25687/us B-3-0-Intel-USB-3-0-Driver-for-Intel-NUC6i-x-SY

  According to the specifications of product for your laptop, the USB driver above must have worked.

  If the usb driver 3 above fails to install the usb controller...

  Please view the the hardware ID for the USB controller requiring driver.

  To find the hardware ID, go the Device Manager and click on the usb controller requiring driver.

  Then click on the Details tab in the upper part of the window of the USB controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• Need help with the decision of the laptop

  I'm sorry for the length of this post, but I really need help. I am buying a laptop and what should be a very exciting perspective (my first laptop purchase) turns into a nightmare that had me pretty much in tears over the weekend.

  My budget is not big - absolute maximum of 600 pounds, but I'd rather spend a little less than that.

  I mainly work of office (Word, Excel, database and PowerPoint) and also some Photoshop work. I also play a strategy game called Caesar 3. I want to charge my copy of XP on the computer or replace Vista or as a partition.

  Looking through the available templates in my price range and rising benchmarks, I found the following:

  Most have processors such as the Intel T5250 or T5450 or AMD TL 58, which are all rated as ok, but not very well. Some have the AMD TL 60, which is a little better and one or two have the T7200 Intel which is even better.

  On most of the machines graphics cards are the ATI Radeon Xpress X 1200 or the Intel GMA X 3100. These two are calibrated as not terrible and the review says that they cannot manage strategy games. Some of the models have the ATI Mobility Radeon HD 2400 and HD 2400XT and one or two have the HD 2600.

  The problem is that the models that have the best processor have the lower rated graphics card and those who do not have XP drivers, I see.

  Don't mind a 15.4 screen "(although the 17.1" would be very nice to have) and want a pretty big hard drive (160 +). I get 2 GB of RAM.

  I'm at my wits end. I don't want to buy a computer that will eventually take a minute or more to refresh a screen when you have more than two things open, or you will have to keep rebooting to make it work. I want to be able to play my one and only (Caesar III) game which is a strategy game and I want to be able to work in Photoshop and maybe one or two other things open at the same time, as a website perhaps.

  Help me please, anyone. I asking the impossible? I can't get my hands on an email address for Toshiba try to get clarity on their part on the issue of drivers and they will be available in the future.

  Then there is of course the issue detailing as each stock only a limited number of models, and we must choose between those detailing.

  I hope someone can help me!

  Hello

  The problem is you want to buy a laptop all over the place but don t want to spend a lot of money.

  In addition, you want to change the XP operating system and have XP drivers.

  Well it's boyfriend very difficult decision ;)

  A laptop for gaming with the graphics power full card cost slightly more than £ 600
  If you need to make a decision; You want to buy a gaming laptop and to spend more than £ 600 or you will have a notebook that is ideal for everyday use, like watching DVDs, in collaboration with the office software, etc.

  The Caesar game is unknown to me, but I assume that it doesn t need a graphics card high performance and it should work on a normal phone too.

  I think that a Satellite a200 is not bad choice for you, because some A200 laptop computers were shipped with the Intel Pentium Dual-Core processor and an NVIDIA GeForce graphics card.

  And very important is that all the XP drivers were already released ;)

• Need to identify unknown bug icon in dock

  I need help to identify the black icon with a bug.  Firefox has been crashing a lot, and the last time it crashed, this icon appeared in my dock.  I have never seen this, and I'm worried that it's a virus any!  When I restarted the computer, he had disappeared.

  

  This is the icon of Firefox Crash Reporter. Research on reverse image has this: https://blog.mozilla.org/faaborg/2008/12/16/new-os-x-icons-made-by-sofa/

  It makes sense, since you said that Firefox was crashing. -AJ

• Need help of LabView on loops

  I'm doing a LabVIEW MyRIO project on how to display the values. Basically, I give myself a LCD screen and a keyboard. I'm supposed to show three sequences in the order. First, it must ask the user to enter a number on the keyboard to choose his field of interest. Then depending on the number, the user is prompted again to choose another number to specify the particular value he or she wants to watch. Finally, the value is displayed and the user can choose to return to the previous sequence interface by pressing a key. Each of the three sequences are able to "hold" until the user presses a button.

  I am able to attend the second interface using all loop inside a structure of the case, but I don't know how to start pressing a button to return to previous sequences. I need help on this particular part.

  Thanks in advance!

  The code that looks way too complicated for the problem you described.  Where is the state machine that we suggested to you?  Why so many useless people sequence structures?