Need help identifying network map

Similar Questions

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• BlackBerry, need help Urgent network connection problem

  Hi all

  I put an application Blackberry OS 6 and 7 of the OS, this application uses the salesforce connection and its other api calls.

  My application works well here in India, but when I deliver it to the customer I had connection timeout error (in the United States). I tried all the string connection possible but still unable to solve the problem at my end.

  Can someone help me with this problem?

  Its very urgent. I need to connect via WAP2 and the code for my connection parameter string is:

  "

  Dim connectionString As String ="";

  String carrierUid = getCarrierBIBSUid();
  String wap2 = getWAP2ServiceRecord();
  If (carrierUid! = null) {}
  Otherwise, use the Uid to build a valid transport BIBS
  request
  Logger.logEventInfo ("uid is:" + carrierUid);
  connectionString = '; deviceside = false; connectionUID ="
  + carrierUid + ";". " » ;
  } ElseIf (wap2! = null) {}
  connectionString = '; deviceside = true; connectionUID =' + wap2;
  } else {}
  A carrier coverage, but not the BIBS. So use TCP of the carrier
  network
  Logger.logEventInfo ("no Uid");
  connectionString = '; deviceside = true;
  }

  return connectionString;

  "

  the definations of function are:

  "

  private static String getCarrierBIBSUid() {}
  Reviews [ServiceRecord] is ServiceBook.getSB () .getRecords ();.

  for (int i = 0; i)< records.length;="" i++)="">
  If (records [i] .getCid () .toLowerCase () .equals ("ippp")) {}
  If (records [i] .getName () .toLowerCase () .indexOf ("bibs") > = 0) {}
  Records return [i] .getUid ();
  }
  }
  }

  Returns a null value.
  }

  private static String getWAP2ServiceRecord() {}
  Full book sb = ServiceBook.getSB ();
  Reviews [] ServiceRecord = sb.findRecordsByCid ("WPTCP");
  String uid = null;
  for (int i = 0; i)< records.length;="" i++)="">
  Search through all records of service to find the
  valid non-Wi-Fi and non - MMS
  Booklet of WAP 2.0 Gateway Service.
  If (records [i] .isValid () &! records [i] .isDisabled ()) {}
  If (records [i] .getUid ()! = null)
  & records [i] .getUid () .length ()! = 0) {}
  If ((records [i] .getCid () .toLowerCase () .indexOf ("wptcp")! = - 1))
  & (records [i] .getUid () .toLowerCase)
  .indexOf("wifi") is - 1).
  & (records [i] .getUid () .toLowerCase)
  .indexOf ("mms") ==-1)) {}
  UID = records [i] .getUid ();
  break;
  }
  }
  }
  }
  If (uid! = null) {}
  Open a connection WAP 2
  Returns the uid;
  } else {}
  Consider another action transport or alternative.
  Returns a null value.
  }

  }

  "

  I get "unable to select the descriptor of adequate transport for the url:

  "https://login.salesforce.com/services/oauth2/token ...". "

  any help is appreciated

  Thank you

  Manish Kumar

  Hi all

  I solved the problem.

  My connection setting requires '; EndToEndDesired' for HTTPS request (although it works for me without this parameter). I tested the app using deviceanywhere and after the addition of this application of the setting run perfectly.

  connectionString = '; deviceside = true; connectionUID =' + wap2
  + "; EndToEndDesired ';

  Thank you for your comment stone

  I was actually using reproductive WAP2.

  Version of the client OS is BB OS 7 (on the Torch 2 9810)

  Concerning

  Manish Kumar

• Need help identifying the drivers on new installation of Windows

  Hello

  I installed a new hard drive on my laptop and installed Windows 7 from iso dvd.
  Problem is that I need to connect to the internet to update the drivers, but drivers Ethernet and network must be updated before they will work.
  Even more, when I go to the Windows Device Manager and click Properties for the device, it does not show the manufacturer of the device, Details of the driver or any other identifying information that would allow me to use another computer to download the drivers on a CD and install it on my laptop.
  Date of manufacture of bridge 01/06/2012
  model number ne56r12u
  Thank you
  William

  William

  GO to the gateway > download network on a USB port drivers > install on gateway

  If you want to know what they are go to the Device Manager (start > Search > Device Manager) right-click on the missing driver > properties > details > use the pull down > find the hardware id > google (see shears)

  

  

• Need help with network controller update

  It seems that my controller network and PCI simple Communications controller are not installed. Can someone give me a link to install it please?
  My material, I would
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C & REV_10
  PCI\VEN_10EC & DEV_8171 & SUBSYS_1467103C
  PCI\VEN_10EC & DEV_8171 & CC_028000
  PCI\VEN_10EC & DEV_8171 & CC_0280

  Hello:

  You need this driver for your laptop wireless card.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_102577_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  See if this driver works for the PCI Simple:

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=4095873 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118167_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• NEED HELP ON NETWORK!

  Hello, I just reinstalled windows xp home edition and I don't have the drivers disk. I need to install the LAN driver to access Internet to update. Can someone provide me with a file or a link to a file that I can save on a drive, then download to the computer? Thank you!

  This means that your tcp/ip settings are wrong.are you are trying to connect to a local or internet network? If LAN, make sure that the computer has the same IP configuration (IE subnet) with other computers on the LAN.check so other computers use DHCP or no if internet, check whether or not other computers using the same connection using DHCP

• Need help with network adapter WLAN which disappears

  802.11n WLAN driver adapt
  Lenovo IdeaCentre q150 10053
  Win 7 Home premium

  Some how I screwed up my computer.  Long story short, wireless network adapter disappeared as an option, so I downloaded the drivers for a USB key.  Run the wizard, but I always get an error saying that the adapter is missing the drivers.

  Any suggestions to fix this?

  Thank you
  Van

  Hello

  Have you made changes before the start of this issue?
  See the link below to troubleshoot the network adapter.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  For reference:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   
  I hope this helps.

• Need help with network Test lab configuration

  I have the Setup VLANS on Cisco switch (4506) and I put aside in ESX (3.5) in its own switch port, but I'm not able to get the systems on this switch to connect.  They seem not to see each other even if they are on the same subnet and the same vlan.  Ideas?

  Looks like it's maybe a configuration problem of VLAN.  On the Cisco switch is the port connected to the network test card NETWORK set up as a trunk port?  If you want to make sure it has 400 VLAN assigned to the trunk.  If it is not defined as a trunk port, you must remove the tag VLAN from your virtual switch.  If the port of Cisco is not defined as a trunk, then the Cisco switch sends tags VLAN to the vSwitch and the vSwitch is looking for packets marked as 400 and not something else by the way to the virtual machine.  Either the trunk or the vSwitch VLAN parameter will be changed to solve the communication.

  If the end goal is to have several VIRTUAL networks appear on network vSwitch test then I'd go the route set port of Cisco to the trunk.  If you just want a VLAN to appear on the vSwitch test then I would keep the port Cisco defined how it is assigned to 400 VLANS and delete reference VLAN of the vSwitch.

  Hope this helps, please give points if it was useful.

• Need help with Image map

  Hey everyone I hope that someone can help me here. What I'm trying to do is create a card flipping immage, if possible. Essentially, I have a card with different routes Charter on it, and I would like to be able to move the mouse on a single track, highlight it in red and then be able to click it and a link to another page. How is this achieved? There are several roads, and they are not distributed between sectors that I could crop and use as individual images. If it doesn't, maybe if someone could explain to me how having a side buttons together to highlight the road and allow me to click and a link to another page. I understand how to work the images hover and such, but multiple transfers on a single image is confusing to me. If someone could answer this, I would be EXTREMELY grateful. Thanks in advance and ask if you need any clarification with my problem to help solve it.
  
  Genii

  Sorry... He answered myself

• 4540 proBook s product ID C9K7O: I need help with network controller driver installation.

  I had to install Windows 7 Premium 64-bit operating system and the network controller was not recognized and therefore, the drivers were not installed. That's what I see in Device Manager:

  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C & REV_01
  
  PCI\VEN_168C & DEV_0032 & SUBSYS_1838103C
  
  PCI\VEN_168C & DEV_0032 & CC_028000
  
  PCI\VEN_168C & DEV_0032 & CC_0280

  I got a driver to download from technical support, but that it does not recognize the controller either. Reference case # (deleted content)

  Dad.

  Have you tried this one?

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5229456 & swItemId = ob_128686_1 & swEnvOid = 4059

  REO

• I need help from Bing maps

  This is the SECOND message I left for Bing IT support. The pointer on the map of Bing (Facebook) to locate my business isn't even close to the physical location of the business. Somneone Pleae contact me so that we can successfully move to the actual location, new customers can find me. Thank you

  Hello

  It's Vista, not the Forum Bing IT support program answers

  and we do not contact you in these forums.

  Whenever you posted to / by e-mail or contacted before going there

  ________________________________________________________

  or read this

  http://www.Microsoft.com/maps/developers/Web.aspx

  http://www.bing.com/community/site_blogs/b/maps/default.aspx

  http://www.bing.com/community/f/default.aspx

• Need help with network drivers

  OK, so I was on win 7 trying to dual boot with Ubuntu when my os disappeared, so I installed Linux Mint and downloaded win 7 on that I then did a boot able USB and installed it via that he started toward the top and then I got an error saying no connection and no connection available even when I plugged it in via a cable Ethernet and it still does not work I tried to install some drivers intell another question, but it did not work I am running a NE56R of the entrance door if it help thank you!

  Install the drivers for your product from the link below.

  NE56R

  http://us.gateway.com/GW/en/us/content/drivers-downloads

• Need help with network inside and outside Transmittion script

  Hi, I have a problem in my script. I would get Vm net.received.average and net.transmitted.average. Somewhere, it displays the empty output for me, can I have a sample of script on obtaining transmittion of network for 7 days

  My script:

  $report = @ (get - Vm = $vms). where {$_.} PowerState - eq "Receptor"} $lastWeek = (get-date). AddDays(-7) foreach ($vm in $vms) {$vmNet = "" |} Select VmName, NetworkReceive, NetworkTransmit $statReceive is Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.received.average stat. Group-object - property Instance $statTrans = Get-Stat-entity ($vm) - start $lastWeek - finishing (Get-Date) - MaxSamples 1 - net.transmitted.average stat. {Group-object - property Forum $vmNet.VmName = $vm.name $vmNet.NetworkReceive = "{0: F2}" f $statReceive.value $vmNet.NetworkTransmit = "{0: F2}" f $statTrans.value $report += $vmNet} $report | Select VmName, NetworkReceive, NetworkTransmit | Export-csv "c:\q33.csv".
  Thank you

  Both are related to the use of aggregation running on your vCenter

  Historical data interval 4 are grouped once a day, and on your vCenter this SQL task seems to be planned at 08:00.

  That is why the time stamp.

  Statistical data are aggregated to one historical interval to another.

  Since ask us the historical interval 4 (with the IntervalMins parameter), the aggregagtion to this historical interval is not yet made.

  This is why the last day 2 are not present in the report.

  You can play with the - Start and - finishing settings to have a period of 7 days which is at least two days yet at the time.

  $report = @()
  $metrics = "net.received.average","net.transmitted.average"
  $vms = Get-Vm | where {$_.PowerState -eq "PoweredOn"}
  $start = (get-date).AddDays(-7)
  $finish = $start.AddDays(7)
  
  Get-Stat -IntervalMins 1440 -Entity ($vms) -start $start -finish $finish -stat $metrics -Instance "" | `  Group-Object -Property Timestamp,EntityId | %{
      $vmNet = ""| Select VmName, Timestamp, NetworkReceive, NetworkTransmit
      $vmNet.VmName = $_.Group[0].Entity.Name
      $vmNet.Timestamp = $_.Group[0].Timestamp
      $vmNet.NetworkReceive = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.received.average"} | Measure-Object -Property Value -Sum).Sum)
      $vmNet.NetworkTransmit = "{0:f2}" -f (($_.Group | where {$_.MetricId -eq "net.transmitted.average"} | Measure-Object -Property Value -Sum).Sum)
      $report += $vmNet}
  $report | Export-csv "c:\q33.csv" -NoTypeInformation -UseCulture
  

• Need help identifying a part.

  This part is mounted at the rear of the case and has a few small strands. What is and what is its role?

  This is on a HP Pavilion Elite m9177c

  Thank you...

  

  In fact, it is a 802.11 b/g Wireless USB adapter card, so you two can stop laughing it upward.

• Need help with settings - wifi extension

  So I need help from networking. I have xfinity for my internet with a router/modem from arris tg1682g. However, it is located in a horrible place. So I run Ethernet to a central point and connected to an AirPort Extreme (latest version). Extreme, I ran Ethernet in the basement and connected a first gen express. I also have a second express gen located in the rooms upstairs.

  the extreme and express it is defined to extend the network, however the signal keeps a fall or be slowed down significantly even when you are inches apart. When I got the arris in bridge mode and the extreme to create the network and expresses it to extend everything worked fine. However, we have the security to the House installed xfinity, and they took the arris off mode bridge because they do not allow me to use the extreme for the security system. Since then, I got nothing else problems with my internet connection. It is either significantly reduced performance (up to 18mbps 150mbps).

  I also get error messages that the network is not found on the airport connected Ethernet devices.

  It has been very frustrating because the people Comcast it is horrible. So, any help would be greatly appreciated. Thanks in advance.

  https://discussions.Apple.com/message/29878786#29878786

  https://discussions.apple.com/thread/7195783 - is it possible to use the apple Time Capsule as a range extender?