Need help in the use of ctx_doc.themes)

Similar Questions

• Need help with the use of beam between two subVis

  Hi all

  I have two inside a big Vi subVis that need to be connected one to the other.

  It's a complicated thing, I already have many sons in the wholesale Vi, which will become a mess if I connect these two subVis line-by-line (there are nearly 16 lines between them).

  I tried bundle but failed two times (basically I don't know how to connect the wires grouped source Subvi the slot - VI intended).

  Could someone give me an idea?  A simple example of VI would be useful.

  Thank you

  + Kunsheng

  You can get a lot of help on the Web site of NOR, too, as this document.

• Need help on the use of the PCI-6221 and c# to control three digital Port and an analog of entry

  I need to send the digital output at three ports and then read an analog input voltage using the analog card PCI-6221.

  I did a c# program to fight against it. I built four tasks altogether. Three tasks for three digital output ports and a single task for analog input.

  How can I reduce the time?

  Using my method, to 3.3ms in total. And it's slow.

  I can build one task for three ports?

  What is the best way to the control task to reduce the time of communication with the PC?

  Is that possible to save a lot of analog reading entry in the memory of the DAQ hardware and then read it all together from the computer in order to reduce time consumption?

  1 million thanks!

  Hello

  Hi Jin,

  To answer your questions, Yes, you are able to configure a task of digital output to use three output ports and PCI-6221 has a buffer of memory FIFO aboard 4095 samples.

  I would like to direct you to the example of NOR-DAQmx for c# files located in the following location on your computer

  C:\Documents and Settings\All Users\Documents\National Instruments\NI-DAQ\Examples\DotNET2.0

   

  Here, you will find predefined examples in c# that should give you a good idea of how to go about architecting your code to achieve the results you need.

  There is also a useful help file which you will find by navigating to Start > all programs > National Instruments > NOR-DAQ > help of NOR-DAQmx .NET Framework 2.0

  I hope that this answer is useful.

  Best regards

  Steve H

• Need help with the use of conditions in the correspondence management

  Hello

  Could someone please provide me with any tutorials or tips on the use of conditions in the correspondence management.

  Thank you.

  http://help.Adobe.com/en_US/enterpriseplatform/10.0/CorrespondenceManagementSolution/WS6db 1f95d7f6c954f-27f2691012b7fafb54f - 7ffe.html

• Need help in the use of dbms_lob.read

  I need to upload a file in an Oracle table to a Blob column. The name of the file with the contents of the file are all in a BLOB column.
  
  Once it's done, I need to read the file and extract the contents of the file and load it into an intermediate table.
  
  Downloaded file is a. CSV file.
  
  
  
  For example, the. CSV file is: ABC.csv file and its contents will look like:
  
  1, Hello, Nisha
  
  2, Hello, happy
  
  3, bye, Rahul
  
  Etc...
  
  
  
  This is why the table containing the BLOB column will contain:
  
  Creation_date file
  
  ABC.csv 09/11/2009
  
  
  
  How can I read a file from the BLOB and upload column in an intermediate table?
  
  
  
  Final staging table should look like:
  
  Record number welcome name
  
  1 Hello Nisha
  
  2 happy salvation
  
  Rahul 3 bye
  
  
  
  I think I'm supposed to use dbms_lob.read, but I'm not really sure how to use it. If there is any script, please mail me the same.
  
  
  
  Thank you...

  But for my needs, I multiiple users downloading the same file in the table of the BLOB.

  It's just worse and worse.

  You can do this asynchronously - have a background process download the CSV file and insert into the destination table. Depends on if your users want to see the results immediately. You can also have your users load the OS, insert it into the destination table, and then in the blob store.

  Information on how to obtain one record of the other of the. The blob column CSV file...

  You will be happy. This is a very unusual request, but you can try searching the interwebs - something can emerge.

  Basically what did your 'condition' is to take a simple piece of functionality, which is well understood and more easily satisfied using built-ins regular, and sought to implement pretty much the hardest way possible. So, good luck with that.

  Cheers, APC

  blog: http://radiofreetooting.blogspot.com

• I need help with the use of Class.forName and getResourceAsStream

  I am trying to write code that will play an audio file. All references I found the point of code as follows...

                            Class dir = Class.forName("lib.testother");
                              InputStream input = dir.getResourceAsStream("/explosion.aac");
                              Player player =
                                  javax.microedition.media.Manager.createPlayer(input, "audio/aac");
                              player.realize();
                              VolumeControl vol = getVolumeControl(player);
                              if (vol != null)
                              {
                                  int volume = vol.getLevel();
                                  vol.setLevel(volume);
                              }
                              player.prefetch();
                              player.start();
  

  I use Blackberry JDE. Now, I'm supposed to put the audio file of the project?

  Second, how then use the class.forName function? I put the audio file as a member of the project and then tried the above code and I get that it can not find lib.testother (which is the path of the code).

  If I use getClass() instead of dir above, getResourceAsStream returns null.

  Are there examples of the use of these or how to include the audio in your project... from end-to-end. The code snippet above is all I could find and it isn't enough.

  THX

  D

  Check this thread:

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=11616&query.ID=18...

• Need help on the use of the Regex to parse the addresses

  Let me start by saying three things:

  1. I suck at the regex
  2. I googled this and did not come with an answer, and
  3. I am in ColdFusion 10

  I have a form with an AutoComplete entry that allows a user to enter street addresses (either in full as "123 Main St, Mayberry" or in the part "123 Main St" or "Main St" or "Main St, Mayberry".)  I need to say if the user provided a street number or not at the beginning of the value they get into the entry.  I'm testing the value of entry with this code:

  < ReFind ("^([0-9]{1-5})", q) cfif >

  <! - address begins with a number - >

  < cfelse >

  <! - address does not start with a number - >

  < / cfelse >

  q is the input value passed in my code for the AutoComplete feature.

  x should be 0 (if the input value does not begin with a number) or a positive integer (if the input value starts with a number).

  Basically, I just need to know if the input value begins with a five-digit.

  I guess I could just do something like:

  < Val (q) cfif >

  I'm better use an expression, and if so, what I'm doing wrong with the one I tried?

  -Carl V.

  1.5 {} {1-5} is not.

  Perhaps read my series of articles about CF regexes to help you get up to speed with them better:

  http://adamcameroncoldfusion.blogspot.co.UK/2012/12/regular-expressions-in-ColdFusion-part .html

  --

  Adam

• need help on the use of more than 28 number of connector in the components

  Hai,

  There are six Subvi in my utility and each output at least 8 of the indicators in the panes. In the main program, I need to collect them all and display. How is that possible?

  Any ideas/suggestions?

  Thank you

  Mathan

  cluster

• Need help with the use of GROUP BY in a select statement UNION

  I am writing a query that allows to combine a legacy system that interfaces it is trial balance in the Oracle of R12 GL.  It was only meant to continue for a month or two, but it is likely to continue for 6 months. Please Auditors Auditors, to provide proof that the system is in balance with Oracle GL.  By my verification requirements, I need to make a full reconciliation from the month of conversion (life in the amount of date), then PTD for each month. 

  The legacy account is placed in attribute1 on the lines of the journals. Uses of the old system balancing segments that are also used on the platform in Oracle for this division, i.e., Procure-to-Pay has been cut over Oracle, but not everything yet.  So, I can't count on the GL_BALANCES table for the info, I get from the JE_LINES.

  My problem is not the only request for the month.  But when I try to combine the queries with a Union, to aggregation of each measurement period in its own column, the group is necessary after each selected instruction rather than allowing me to put at the end of the UNION.  (When I put the group by at the end of the UNION, I have the 'not one group' function)

  So I get duplicate for each month of discrete measure accounts. When I duplicate in my Oracle database accounts, I can't count on the VLOOKUP function in excel to exactly match an account of inheritance.  I know there are more sophisticated ways to provide this output, but I'm hoping to get this info in a simple query.

  Thank you in advance for any advice you can provide

  Example of data output (the goal for me is to get the two rows to appear as one based on common points on the LEGACY_ACCOUNT and the ORACLE ACCOUNT

  The LEGACY ACCOUNT	ORACLE ACCOUNT	JUN_15	JUL_15	AUG_15	SEP_15	OCT_15	NOV_15	DEC_15
  010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	0	-242961.04	0	0	0	0
  010000001109000003584	190-600552-1001-100231-000-0000-0000-0000	0	192588.02	0	0	0	0	0

  Here is a simplified version of my code that returns both records.  In my research, I had found a number of conversations where it has been shown that the group could be put at the end of the select statement.  However, when I remove the group from the first select statement I get SQL error: ORA-00937: not a function of simple-group

  Select

  l.attribute1 LEGACY_ACCOUNT,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | COMBINATION OF C.SEGMENT8,

  JUN_15 TO_NUMBER('0').

  JUL_15, sum (NVL(l.accounted_dr,0.00)-NVL(l.accounted_cr,0.00)),

  TO_NUMBER('0') AUG_15.

  TO_NUMBER('0') SEP_15.

  TO_NUMBER('0') OCT_15.

  TO_NUMBER('0') NOV_15.

  DEC_15 TO_NUMBER('0')

  Of

  b GL.gl_je_batches,

  GL.gl_je_headers h,

  GL.gl_je_lines l,

  GL.gl_code_combinations c,

  GL.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190 ', '191', '192', '193', '194', ' 195 ', ' 196',' 197', ' 198 ', ' 199',)

  ('200 ', '203', ' 205', '206 ', '330', '331', '332',' 333 ', ' 334',' 335', ' 336 ', ' 337')

  and j.language = 'en '.

  and h.PERIOD_NAME ("JUL-15'")

  Group

  l.attribute1,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | C.SEGMENT8

  UNION

  Select

  l.attribute1 LEGACY_ACCOUNT,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | COMBINATION OF C.SEGMENT8,

  JUN_15 TO_NUMBER('0').

  TO_NUMBER('0') JUL_15.

  AUG_15, sum (NVL(l.accounted_dr,0.00)-NVL(l.accounted_cr,0.00)),

  TO_NUMBER('0') SEP_15.

  TO_NUMBER('0') OCT_15.

  TO_NUMBER('0') NOV_15.

  DEC_15 TO_NUMBER('0')

  Of

  b GL.gl_je_batches,

  GL.gl_je_headers h,

  GL.gl_je_lines l,

  GL.gl_code_combinations c,

  GL.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190 ', '191', '192', '193', '194', ' 195 ', ' 196',' 197', ' 198 ', ' 199',)

  ('200 ', '203', ' 205', '206 ', '330', '331', '332',' 333 ', ' 334',' 335', ' 336 ', ' 337')

  and j.language = 'en '.

  and h.PERIOD_NAME ("AUG-15'")

  Group

  l.attribute1,

  C.SEGMENT1: '-' | C.SEGMENT2: '-' | C.SEGMENT3: '-' | C.SEGMENT4: '-' | C.SEGMENT5: '-' | C.SEGMENT6: '-' | C.SEGMENT7: '-' | C.SEGMENT8

  order by 1

  Is there a good reason to make this period both as a series of trade unions?  This looks like a classic pivot for me query.  This will make a way through the tables and should get the desired results.

  Select l.attribute1 legacy_account,

  c.Segment1: '-' | c.Segment2: '-' | c.segment3: '-' | c.segment4: '-' |

  c.segment5: '-' | c.segment6: '-' | c.segment7: '-' | combination of c.segment8,

  sum (case when h.period_name = 'JUN-15'

  then nvl(l.accounted_dr,0.00)-nvl(l.accounted_cr,0.00)

  otherwise 0 end) jun_15,.

  sum (case when h.period_name = 'JUL-15'

  then nvl(l.accounted_dr,0.00)-nvl(l.accounted_cr,0.00)

  otherwise 0 end) jul_15,.

  - and similar to DEC - 15

  GL.gl_je_batches b, gl.gl_je_headers h, gl.gl_je_lines l.

  GL.gl_code_combinations c, gl.gl_je_sources_tl j

  where b.je_batch_id = h.je_batch_id

  and h.je_header_id = l.je_header_id

  and l.code_combination_id = c.code_combination_id

  and h.je_source = j.je_source_name

  and c.segment1 ('190', '191', '192', '193', '194', '195',' 196', ' 197',

  '198 ', '199', '200', '203', '205' ', 206',' 330 ', ' 331',

  "332 ', '333', '334', '335',' 336 ', ' 337')

  and j.language = 'en '.

  and h.period_name (' Jun-15', ' 15 JUL', ' AUG-15'... "" ")

  L.attribute1 group,

  c.Segment1: '-' | c.Segment2: '-' | c.segment3: '-' |

  c.segment4: '-' | c.segment5: '-' | c.segment6: '-' |

  c.segment7: '-' | c.segment8

  If you're on the 11G version of the database, you might want to look at the PIVOT keyword that will do the same thing in a more concise expression.

  John

• Need help on the use of Partition for a SELECT statement

  -Hello everyone,
  -This my request. I'm a junior developer of the APEX.
  -database version is 11g version 4.0 apex

  DEFINE startmonth = "Aug 2012";
  DEFINE endmonth   = "Oct 2012";
  WITH  all_months  AS
  (
     SELECT ADD_MONTHS(to_date('&startmonth','MON YYYY'), ROWNUM-1) AS which_month
     ,      ADD_MONTHS(to_date('&startmonth','MON YYYY'), ROWNUM  ) AS next_month
     from all_objects
     where
     rownum <= months_between(to_date('&endmonth','MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1))
  )
  ,
  lt_event_type_a AS
  ( select event_type, active, e_id 
    from lt_event_type
    where active = 1
  )
  ,
  engagement_event_a as
  (SELECT * FROM engagement_event
   where active =1
   )
  
  select lt_ev.event_type,TO_CHAR (am.which_month, 'Mon YYYY')  AS month, count(ce.engagement_id) as monthly_events_per_event_type
    from lt_event_type_a lt_ev
    
    left join engagement_event_a ev  on
      lt_ev.event_type = ev.event_type
    
    left join court_engagement ce on
      ev.e_eng_id = ce.engagement_id
       and ce.court_name like '%' --will be filtered with a court_name parameter
   
    right join all_months am on
      ce.date_joined_court <= LAST_DAY(am.which_month) 
      and (ce.date_terminated is null or ce.date_terminated > LAST_DAY(am.which_month) )
   group by rollup(lt_ev.event_type, am.which_month)
   order by lt_ev.event_type, am.which_month ;
   

  - and the results are

   EVENT_TYPE                                         MONTH             MONTHLY_EVENTS_PER_EVENT_TYPE
  -------------------------------------------------- ----------------- -----------------------------
  Absent without leave                               Sep 2012                                      1 
  Absent without leave                               Oct 2012                                      1 
  Absent without leave                                                                             2 
  Court Appearance                                   Sep 2012                                      2 
  Court Appearance                                   Oct 2012                                      3 
  Court Appearance                                                                                 5 
  Incentive granted                                  Aug 2012                                      1 
  Incentive granted                                  Sep 2012                                      2 
  Incentive granted                                  Oct 2012                                      1 
  Incentive granted                                                                                4 
  Judicial direction                                 Oct 2012                                      1 
  Judicial direction                                                                               1 
  Police report                                      Sep 2012                                      2 
  Police report                                      Oct 2012                                      2 
  Police report                                                                                    4 
  Positive test                                      Sep 2012                                      1 
  Positive test                                      Oct 2012                                      1 
  Positive test                                                                                    2 
  Sanction imposed                                   Aug 2012                                      1 
  Sanction imposed                                   Sep 2012                                      1 
  Sanction imposed                                   Oct 2012                                      1 
  Sanction imposed                                                                                 3 
                                                                                                  21 
  
   23 rows selected 
   

  - but the condition is that I list all types of event in the search list
  -with a total number of events by event type for each month in a number of calendar months (user will select months like August 2012 or a range of month August 2012 - October 2012)
  -the query above just list all the events (see table engagement_event) that have the date_join_court and date_terminated meets the required conditions.
  -I wonder, is it possible to enumerate all types of event, then monthly for each event type with the total as

    EVENT_TYPE                                         MONTH             MONTHLY_EVENTS_PER_EVENT_TYPE
  -------------------------------------------------- ----------------- -----------------------------
  A very long long name                              Aug 2012                                      0 
  A very long long name                              Sep 2012                                      0 
  A very long long name                              Oct 2012                                      0 
  A very long long name                              Total                                           0 
  Absent without leave                               Aug 2012                                      0 
  Absent without leave                               Sep 2012                                      1 
  Absent without leave                               Oct 2012                                      1 
  Absent without leave                               Total                                         2 
  Court Appearance                                   Aug 2012                                      0 
  Court Appearance                                   Sep 2012                                      2 
  Court Appearance                                   Oct 2012                                      3 
  Court Appearance                                   Total                                         5 
  Incentive granted                                  Aug 2012                                      1 
  Incentive granted                                  Sep 2012                                      2 
  Incentive granted                                  Oct 2012                                      1 
  ......

  -I tried to use PARTTTION, but still, it does not produce the correct result,
  -Here's a version shortened the tables related to the query
  -Thank you very much in advance.
  

  --create lookup table for event type
   CREATE TABLE "LT_EVENT_TYPE" 
     ("E_ID" NUMBER, 
       "EVENT_TYPE" VARCHAR2(50 BYTE), 
       "DATE_CREATED" DATE, 
       "ACTIVE" NUMBER(2,0) DEFAULT 1
     ) 
  
   --create table court_engagement
    CREATE TABLE "COURT_ENGAGEMENT" 
     (     "ENGAGEMENT_ID" NUMBER, 
       "COURT_NAME" VARCHAR2(50 BYTE), 
       "DATE_REFERRED" DATE, 
       "DETERMINATION_HEARING_DATE" DATE, 
       "DATE_JOINED_COURT" DATE, 
       "DATE_TERMINATED" DATE, 
       "TERMINATION_TYPE" VARCHAR2(50 BYTE), 
       "DATE_CREATED" DATE, 
       "ACTIVE" NUMBER(2,0) DEFAULT 1, 
       "DEFENDANT_ID" NUMBER
     )
     --create table engagement_event
     CREATE TABLE "ENGAGEMENT_EVENT" 
     (     "EVENT_ID" NUMBER, 
       "E_ENG_ID" NUMBER, 
       "EVENT_TYPE" VARCHAR2(50 BYTE), 
       "START_DATE" DATE, 
       "END_DATE" DATE, 
       "RELATED_SERVICE_ID" NUMBER, 
       "DATE_CREATED" DATE, 
       "ACTIVE" NUMBER(2,0)
     )
  -------
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (9,'A very long long name',to_date('02/11/12','DD/MM/RR'),0);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (6,'Excellent performance',to_date('27/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (7,'Sanction imposed',to_date('27/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (8,'Incentive granted',to_date('27/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (2,'Police report',to_date('25/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (1,'Court Appearance',to_date('25/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (3,'Judicial direction',to_date('25/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (4,'Positive test',to_date('25/09/12','DD/MM/RR'),1);
  Insert into LT_EVENT_TYPE (E_ID,EVENT_TYPE,DATE_CREATED,ACTIVE) values (5,'Absent without leave',to_date('27/09/12','DD/MM/RR'),1);
  ----------
     
  REM INSERTING into COURT_ENGAGEMENT
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (13,'BBB',null,null,to_date('01/09/12','DD/MM/RR'),to_date('14/09/12','DD/MM/RR'),'Graduated',to_date('03/10/12','DD/MM/RR'),1,4);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (16,'BBB',null,null,to_date('15/09/12','DD/MM/RR'),to_date('07/11/12','DD/MM/RR'),'Did not Graduate',to_date('04/10/12','DD/MM/RR'),1,4);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (20,'AAA',null,null,to_date('07/10/12','DD/MM/RR'),null,'Did not Graduate',to_date('08/10/12','DD/MM/RR'),1,10);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (30,'BBB',null,null,to_date('04/09/12','DD/MM/RR'),null,null,to_date('05/11/12','DD/MM/RR'),1,19);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (21,'AAA',null,null,to_date('07/10/12','DD/MM/RR'),null,null,to_date('10/10/12','DD/MM/RR'),1,11);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (15,'AAA',null,null,to_date('02/10/12','DD/MM/RR'),null,null,to_date('03/10/12','DD/MM/RR'),1,3);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (23,'AAA',null,to_date('30/09/12','DD/MM/RR'),to_date('29/09/12','DD/MM/RR'),null,null,to_date('15/10/12','DD/MM/RR'),1,8);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (25,'AAA',null,to_date('10/10/12','DD/MM/RR'),to_date('20/09/12','DD/MM/RR'),null,null,to_date('18/10/12','DD/MM/RR'),1,15);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (27,'AAA',null,to_date('11/09/12','DD/MM/RR'),to_date('19/07/12','DD/MM/RR'),null,null,to_date('23/10/12','DD/MM/RR'),1,16);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (2,'BBB',to_date('01/10/12','DD/MM/RR'),to_date('01/10/12','DD/MM/RR'),to_date('29/09/12','DD/MM/RR'),null,'Did not Graduate',to_date('27/09/12','DD/MM/RR'),1,2);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (28,'AAA',null,to_date('03/10/12','DD/MM/RR'),to_date('01/10/12','DD/MM/RR'),null,null,to_date('24/10/12','DD/MM/RR'),1,17);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (17,'AAA',null,null,to_date('08/10/12','DD/MM/RR'),to_date('11/10/12','DD/MM/RR'),'Did not Graduate',to_date('04/10/12','DD/MM/RR'),1,6);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (18,'AAA',null,null,to_date('03/09/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),'Graduated',to_date('05/10/12','DD/MM/RR'),1,7);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (19,'BBB',null,null,to_date('01/10/12','DD/MM/RR'),to_date('09/10/12','DD/MM/RR'),'Graduated',to_date('05/10/12','DD/MM/RR'),1,9);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (22,'AAA',null,null,null,null,null,to_date('11/10/12','DD/MM/RR'),1,12);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (24,'AAA',to_date('08/10/12','DD/MM/RR'),to_date('01/10/12','DD/MM/RR'),to_date('04/10/11','DD/MM/RR'),null,'GangNam Style',to_date('17/10/12','DD/MM/RR'),1,14);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (26,'BBB',null,to_date('17/10/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),null,null,to_date('18/10/12','DD/MM/RR'),1,7);
  Insert into COURT_ENGAGEMENT (ENGAGEMENT_ID,COURT_NAME,DATE_REFERRED,DETERMINATION_HEARING_DATE,DATE_JOINED_COURT,DATE_TERMINATED,TERMINATION_TYPE,DATE_CREATED,ACTIVE,DEFENDANT_ID) values (29,'AAA',null,null,to_date('20/09/12','DD/MM/RR'),null,'GangNam Style',to_date('30/10/12','DD/MM/RR'),1,18);
  
  ---------------
  REM INSERTING into ENGAGEMENT_EVENT
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (8,18,'Incentive granted',to_date('01/10/12','DD/MM/RR'),null,null,to_date('05/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (21,2,'Police report',to_date('20/09/12','DD/MM/RR'),to_date('02/10/12','DD/MM/RR'),null,to_date('24/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (7,2,'Court Appearance',to_date('02/10/12','DD/MM/RR'),to_date('16/10/12','DD/MM/RR'),12,to_date('03/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (11,19,'Court Appearance',to_date('02/10/12','DD/MM/RR'),null,null,to_date('05/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (13,21,'Court Appearance',to_date('01/10/12','DD/MM/RR'),to_date('11/10/12','DD/MM/RR'),null,to_date('10/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (18,24,'Incentive granted',to_date('01/10/12','DD/MM/RR'),to_date('15/10/12','DD/MM/RR'),null,to_date('17/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (20,2,'Police report',to_date('16/09/12','DD/MM/RR'),to_date('18/09/12','DD/MM/RR'),10,to_date('23/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (24,17,'Court Appearance',to_date('16/10/12','DD/MM/RR'),null,null,to_date('25/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (26,30,'Judicial direction',to_date('01/10/12','DD/MM/RR'),null,null,to_date('06/11/12','DD/MM/RR'),0);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (9,2,'Court Appearance',to_date('01/09/12','DD/MM/RR'),to_date('15/09/12','DD/MM/RR'),10,to_date('05/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (12,20,'Judicial direction',to_date('07/10/12','DD/MM/RR'),null,null,to_date('08/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (17,24,'Sanction imposed',to_date('16/10/12','DD/MM/RR'),to_date('31/10/12','DD/MM/RR'),null,to_date('17/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (23,13,'Court Appearance',to_date('01/10/12','DD/MM/RR'),null,34,to_date('24/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (5,2,'Positive test',to_date('01/10/12','DD/MM/RR'),to_date('10/10/12','DD/MM/RR'),1,to_date('02/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (10,19,'Judicial direction',to_date('01/10/12','DD/MM/RR'),null,null,to_date('05/10/12','DD/MM/RR'),1);
  Insert into ENGAGEMENT_EVENT (EVENT_ID,E_ENG_ID,EVENT_TYPE,START_DATE,END_DATE,RELATED_SERVICE_ID,DATE_CREATED,ACTIVE) values (19,25,'Absent without leave',to_date('18/10/12','DD/MM/RR'),null,null,to_date('18/10/12','DD/MM/RR'),1);

  -Thanks for reading this.
  
  Ann

  Please give sample data and expected results.

  Hope below is what you'd expect - yet, I would like to ask a clarification - you have a filter 'where active = 1.
  And yet, you want these types in the output. I commented on this to my query filter.
  You can change accordingly

  WITH  all_months  AS
  (
     SELECT ADD_MONTHS(to_date('&startmonth','MON YYYY'), ROWNUM-1) AS which_month
     ,      ADD_MONTHS(to_date('&startmonth','MON YYYY'), ROWNUM  ) AS next_month
     from all_objects
     where
     rownum <= months_between(to_date('&endmonth','MON YYYY'), add_months(to_date('&startmonth','MON YYYY'), -1))
  )
  ,
  lt_event_type_a AS
  ( select event_type, which_month,next_month
    from lt_event_type, all_months
    --where active = 1
  )
  ,
  engagement_event_a as
  (SELECT * FROM engagement_event
   where active =1
   )
  
  select lt_ev.event_type,TO_CHAR (lt_ev.which_month, 'Mon YYYY')  AS month,
        count(ce.engagement_id) as monthly_events_per_event_type
    from engagement_event_a ev
    left outer join court_engagement ce on
     ( ev.e_eng_id = ce.engagement_id
          and ce.court_name like '%' )
    right outer join lt_event_type_a lt_ev   on
      (ce.date_joined_court <= LAST_DAY(lt_ev.which_month)
      and (ce.date_terminated is null or ce.date_terminated > LAST_DAY(lt_ev.which_month) )
      and lt_ev.event_type = ev.event_type
      )
   group by rollup(lt_ev.event_type, lt_ev.which_month)
   order by lt_ev.event_type, lt_ev.which_month ;
  
  EVENT_TYPE                                         MONTH    MONTHLY_EVENTS_PER_EVENT_TYPE
  -------------------------------------------------- -------- -----------------------------
  A very long long name                              Aug 2012                             0
  A very long long name                              Sep 2012                             0
  A very long long name                              Oct 2012                             0
  A very long long name                                                                   0
  Absent without leave                               Aug 2012                             0
  Absent without leave                               Sep 2012                             1
  Absent without leave                               Oct 2012                             1
  Absent without leave                                                                    2
  Court Appearance                                   Aug 2012                             0
  Court Appearance                                   Sep 2012                             2
  Court Appearance                                   Oct 2012                             3
  Court Appearance                                                                        5
  Excellent performance                              Aug 2012                             0
  Excellent performance                              Sep 2012                             0
  Excellent performance                              Oct 2012                             0
  Excellent performance                                                                   0
  Incentive granted                                  Aug 2012                             1
  Incentive granted                                  Sep 2012                             2
  Incentive granted                                  Oct 2012                             1
  Incentive granted                                                                       4
  Judicial direction                                 Aug 2012                             0
  Judicial direction                                 Sep 2012                             0
  Judicial direction                                 Oct 2012                             1
  Judicial direction                                                                      1
  Police report                                      Aug 2012                             0
  Police report                                      Sep 2012                             2
  Police report                                      Oct 2012                             2
  Police report                                                                           4
  Positive test                                      Aug 2012                             0
  Positive test                                      Sep 2012                             1
  Positive test                                      Oct 2012                             1
  Positive test                                                                           2
  Sanction imposed                                   Aug 2012                             1
  Sanction imposed                                   Sep 2012                             1
  Sanction imposed                                   Oct 2012                             1
  Sanction imposed                                                                        3
                                                                                         21 
  
   37 rows selected 
  

• Need help with the use of masks

  I tried to use the quick selection tool to select areas of a photo in an adjustment layer, but it is not put at the disposal of the adjustment. The selection is done on the photo, but not in the adjustment layer box, as the selection brush only. I find that the selection brush is rather hard to use that you can't see exactly what you select as it only indicates in the layer box not on the photo itself.

  I'm sure there is a better way to do it, but I'm not.

  Can someone give me a hint or a clue, please?

  It would be really useful to be able to use the quick selection tool, or one of the other selection tools to isolate parts of images for extra work, or to keep separate work on the rest of the image.

  I know I'm not understanding something in Elements 8 page 129 + Barbara instructions.

  You must select the box before making the adjustment layer, on the one hand. To change the area of the layer afterwards, you paint according to the instructions in Chapter 10. Selections have no effect on an existing adjustment layer.

• Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

  Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

  I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

  Hello
   
  Please follow the links below to troubleshoot the computer.
   
  Method 1
   
  Connect one microphone, music player or other audio device to your computer
  
  http://Windows.Microsoft.com/en-us/Windows7/connect-a-microphone-music-player-or-other-audio-device-to-your-computer
  
  Method 2
  
  Step 1
  
  Troubleshooting: headsets
  
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/microphone-issues
  
  Step 2
  
  Open the troubleshooting of Audio recording
  
  http://Windows.Microsoft.com/en-us/Windows7/open-the-recording-audio-Troubleshooter
  
  Method 3
  
  How to adjust the microphone volume
  
  a. click Start, type mmsys.cpl in the search box and press ENTER.
  b. in the sound dialog box, click the recording tab.
  c. click Microphone, and then click Properties.
  Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
  d. the Microphone Properties dialog box, click the custom tab.
  e. select or clear the box amp Microphone.
  f. click the levels tab.
  g. set the volume to the desired level, and then click OK.
  h. click OK to close the sound dialog box.
   
  How to adjust the setting of the voice
   
  a. start the game.
  b. connect to LIVE (the Guide).
  c. click personal settings.
  d. click on voice.
  e. make sure that the recording volume level indicator records at a bar when you talk.
  f. click done.

  If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.

  http://www.Microsoft.com/hardware/en-us/support

  
  I hope this helps.
  
   

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

  My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

  < object edited by host >

  We are users like you.  Search locally by using something like Yelp or similar

  http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

  or read a few links which may be relevant on this forum about the slow mac mini

  http://BFY.tw/5C63

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update