Need help: invalid BS_jmpBoot in the boot block: 9a6c34

Similar Questions

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need for a solution when the Boot Manager is missing.

  * Original title: startup

  need for a solution when the Boot Manager is missing

  Startup Repair,

  http://www.SevenForums.com/tutorials/681-startup-repair.html

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Accidentally, I purchase an upgrade when I was trying to buy Acrobat Pro. I need help in Exchange for the upgrade to what I need.

  I can't find a certain number of support the customer to solve this problem.

  You can contact the Support from Adobe using link below:

  Contact the customer service

  [Click on always need help button and select the Chat option]

• Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  You can try to download instead of using the drive...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Need help: invalid system disk error

  I must have left my laptop on the week last with only a small battery backup as victory, that I woke up in the morning, he had absolutely no power.  When I plugged the laptop and I tried to reboot it wasn't going to the normal microsoft vista home page.

  Instead of this turned back or the system bios and on the top of the screen, he said.  Invalid system disk error.  I pressed ESC and immediately thereafter loaded up normally.  Once on the page of windows, he showed he was about 8 windows updates.  (this every way - when I left my computer on automatic update of windows, running and starting to update my computer.  Since I only had a remaining battery minimum computer must have lost all power during the update.  Because update has not been completely loaded my computer now has a problem starting).

  Whenever I turn on computer, need me the black screen with the comment of the system disk error.  While hitting escape when this screen is easy to do and makes windows vista starts normally - I'd rather have a completely normal vista installation program.

  Help, please.

  What should I do?

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Using the boot-block to identify users within a group of users?

  Hello
  
  I need help with the following scenario:
  
  I need to identify if a user is a member of a specific group of users, and if so I want to fill a session variable.
  
  I do not have (or want) an external table that contains the user id and user groups. Instead, I want to perform this check completely in the repository. I know that there are two session variable system that contain the necessary information:
  
  USER (containing the OBI accountname)
  GROUP (containing a list of all the groups that a user is a member)
  
  Can anyone provide me with the syntax or a sample script to perform this check:
  
  If: GROUP contains "name_of_group_to check_for" then CHECK = CHECK 'Yes' to another = 'no '.
  
  In addition, when creating a block initialization, I need to specify a collection of connection, but in my case, I don't think that I need to specify one?
  
  Thanks for any help!

  I don't think you can do what you want. The reason is that the GROUP of session variable is filled with the guarantee of the RPD groups Finally, so if you were to create an Init Block to the If statement (IF in SQL) you mention below will be empty. Init blocks must also run on a database.

  Now, I think you are trying to solve a requirement in a very strange way. I would ask you that, instead of posting the solution he's better, clearly state you your real business needs to see if it's the best way to solve it.

• HP KP721AV: Need help, computer father has the blue screen "enter power - on password.

  I need help.  Electricity blimped last night at my father, leaving the computer does not off properly.  We have tried to unplug the unit from the wall to reset, but again it still leaves us with the "power - on Password enter" can anyone help?  Thanks in advance

  Hello:

  Please see the below troubleshooting guide, annex B, page 62.

  http://h20566.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3785403&docid=emr_na-c01516072&docLocale=en_US

• need help, can not attach the image file to my yahoo mail.

  need help, trying to compose e-mail... can not attach the image file to my yahoo mail... using firefox. Vista starter edition

  using 3 G hsdpa usb modem, model huawei E156G

  download stats is 0.00 KB its not not download, http://img337.imageshack.us/img337/2547/3ginterface.jpg

  the strange thing is that if I only download small file/pic as 50 KB download data passes through, but as 1 MB image file or more it will not pass and remained at 0.00 kb

  I tried to run administrator (always on the standard user account)---> cmd---> ipconfig/flushdns, still the same problem.

  Hi korgmeister,

  1 when was the last time it was working fine?

  2. do you have security software installed on the computer?

  3. are you able to access all Web sites?

  First of all, I suggest that you try to download the file with Windows internet explore.

  If you are able to download using Windows internet explore, then there may be a problem with the Firefox browser.

  Uninstall and reinstall Firefox browser and check.

  If you are facing a similar issue when you use Internet explore, then it may be Internet problem try to download some other file or document check if it works.

  Also contact your internet service provider to check if the connection side there is fine.

  Go back with the results!

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I need help for activation of the real administrator account.

  I have a problem with Adobe reader 9 standard, Adobe customer service asked the unhide real administrator account before you can continue to help me.

  I need help for that.

  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Read the above info.

  See you soon. Mick Murphy - Microsoft partner

• Need help to take down the netkey password so I can get some things, he won ' t let me in.»

  Original title: Netkey

  I need help for the netkey password so I can get some things, he won ' t let me in..

  We can't really help a lot with that here, but you can contact the company that makes NetKey here:

  http://www.NCR.com/contact-us

  They can help how to use them (or remove) their system.

• ID error blackBerry Smartphones: 40730 need help urgent to reset the password *.

  Hi team,

  I need help to reset the password for the BB APP world, I logged this site:- https://blackberryid.blackberry.com/bbid/main/login.seam?callbackuri=&i=4218081 this link is send me by email a password reset agin to the BB user ID which is (info personal removed) @blackberry.com is my user name. How can I get the password from there when I ask to reset the password.

  Donmenezes wrote:
  Hi guru,.
  Thank you for the answer. I followed the entire process, but none the case on all the links there is an option to send the password to reset BlackBerry ID to an external address is e-mail that is for example:-gmail account. I really need some request you please explain myself better.

  I think that you read correctly... re-read the Workaround"" section. He said nothing to do anything to your GMail account instead, you must follow the instructions, log into your BIS account (from a PC or your BB... it will be much easier to use a PC well) and activate the automatic redirection of your @bb to your Gmail account. Then return the password reset email, access your GMail account, and you should receive the email to reset it in order to finally use it to solve your problems.

  Please follow exactly the instructions and if you don't follow some sections, he cites exactly with what exactly you did and what exactly doesn't work correctly (point by point, please, with all the details). I can't explain that any better unless you are specific about exactly where/how you're stuck.

  Good luck!

• I desperately need help.  I get the message error message when visiitng my URL on mobile device!

  Hi all

  I desperately need help.

  When visiting my website on a mobile device this message, ('some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »)

  
  

  I talked to my hosting company and they say it's to do with the script and this must be changed. They gave me a link to a Web site with instructions. CodingForums.com as with most people using Muse the reason we use it is because there is no need to use the code. I don't really have no where to start with this.

  
  

  Y at - there anyone out there that can help me. My URL is entertainment - isle.com

  
  

  Thank you

  Who is your hosting provider?

  Clearly your webhost changes the files that are served. If you go to http://entertainment-isle.com/phone (or http://entertainment-isle.com/tablet) in a browser desktop all the files of the phone (or tablet site files) site are well served and the site works properly. However, if you go to the same URL using a mobile device files that are served are different. I suspect that your webhost think they do you a favor, and they have a code side server that modifies the files being served when they go to a mobile device, with result a site broken. Chances are it is something you, or they, can turn off to your site.

  If you provide the name of your hosting provider, we are able to collect information on their website how (and why) they want to change the files that are served and how to disable this "feature".