Need help just checked.

Similar Questions

• Need help to check the switch VMNIC and VNIC DVS mapping...

  Need help to check the switch VMNIC and VNIC DVS mapping...

  I checked the command net-dvs, but it was not useful.

  Thank you

  Ravinder Singh...

  You do not have access on the interfaces between itself or this info is not visible in vCenter? Probably, you should talk to one who is in charge of your nexus dvSwitch.

  I don't know how it works on the nexus 1000v switch, but the output of the net-dvs provides information on balancing policy for all ports (note that he understands the uplink ports that may still occur as "port id of virtual source"):

  # net-dvs. "grep EI ' (Balancing | port)"

  port 320:

  source port = load balancing virtual id

  port 321:

  source port = load balancing virtual id

  port 177:

  source port = load balancing virtual id

  You should also be able to enter this info from esxcli, but I don't know if there is a hook to esxcli for the link. Perhaps, you can branch off with cisco of dvs esxcli vswitch network or something. On the dVS of vmware, you could do:

  # esxcli dvs lacp vmware vswitch network status

  LACP is disabled on DVSwitch.

  
  

  # esxcli dvs lacp get config vmware vswitch network

  DVS name LAG ID cards active network Mode

  ------------  ------  -------------  -------  ----

  Vmnic1 Some_DVSwitch 0, vmnic3 false

• Satellite L300D - need help to check if the adapter fits

  My adapter for my * Satellite L300D - 11A system unit * recently broke and the laptop will not load. I am resonably sure that the adapter is broken as the power to the adapter cord works, but the adapter for the laptop does not work.

  I found something that I think is a replacement, but I'm not sure if it will work with your computer

  The name of the replacement unit is ' + AC adapter for Toshiba Satellite L650 - 07T L300D - ST3501 E105 - S1402 computer laptop charger + "and since he mentions L300D-ST3501 thought he could adapt.

  Any suggestions on were fo find more information or anyone can answer the question directly?

  Thank you

  / Gems

  I recommend the Exchange with the original AC power adapter. Check the top label and there you will find the part number. Something like PA3290E-3ACA.

  By using this part number, you can order a new one.
  You can order online Googling around or contact the nearest Toshiba service provider and they can get one for you.

• Need help to check the legality of the site

  Good been looking at this site and wanted to know what legal site is they sell key/downloads of windows operating system products and other things.

  Original Titlle: Hey was looking at this site and wanted to know what legal site is they sell key/downloads of windows operating system products and other things.

  No, no third party is authorized to sell product keys. Product keys must be provided by the actual installation media (if download physical or digital), she is also accompanied by documents.

  Only Microsoft sells retail key products that have optional download of the installation media:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• Hey, I need help☹️ my battery dies so fast and what suite 26% it's just farm off☹️

  Hey, I need help

  my battery dies so fast and when on 26% it's just... If turned off on me I need help

  Please read this article for suggestions, including turn off background App update.

  http://www.Apple.com/batteries/maximizing-performance/

  Also try to download the app battery life which is available for free on the App Store. Check the battery with it and if defective, schedule an appointment in an Apple Store for eventual replacement.

• Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P). Help, please.

  Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P).  Help, please.

  The last thing installed on windows update is Windows Update Agent 7.6.7600.320, but it seems to have installed correctly.  I tried a lot of different things in the forums, but nothing works.  Please notify.  Thank you.

  Just found the solution.  I needed to update my version of Internet Explorer.  I used 8 and just updated to 11.  Problem solved.  Updates work again.

• I just get my new laptop, November 9 and when I go to watch a video of youtube that works the flash stockwave need help

  When I go on youtube and try to watch a video, a box pops up saying stockwave flash does not work I really need your help just get this Lalonde Sunday

  Have you tried to update Adobe flash player? Try to download and install from here:

  http://get.adobe.com/flashplayer/
  

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an auto update that's simple to install, just get this error every time

  [Error number: 0x8024400A] Need help with this error... I reinstalled XP SP1 and I can't get an automatic update that's simple to install, just get this error at each time HHHHEEEELLLPPPPP! Thank you

  I had the same problem.  But finally found a solution.  If your listing is similar to mine, then keep.  XP Media Center Edition 2005 (sp2).  AMD Athlon 64 x 2 Dual-Core, HP a1630n desktop computer.

  Go to the HP website, search for sp37394-XP sp3 Upgrade utility Microsoft for systems equipped with AMD processors.

  I had the same 0 x 80240036, 0x8024400a error, but realize my problem was really get manually downloaded sp3 and installed without continue loop crashing and not error messages.

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  worked very well and when was time to save I get the cyclic redundancy check, I try several times and made the same thing I need help please

  Hello Hans,.

  Thanks for choosing Microsoft Community!

  According to the description of the problem, you have problems when you use the backup on Windows 8 feature.

  Please answer these questions to better understand the issue and help you:

  1. are - what you're talking to backup and restore functionality on Windows 7?

  2 have you made any changes to the computer before the show?

  It is perhaps to cause bad sectors on the hard drive, run the disk check to repair bad sectors

  Check your hard drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-your-hard-disk-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  For more information:

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Just upgraded to Ultimate, need help of activation, wants to produce different IDS?

  I've just upgraded to Ultimate, need help of activation, wants the different product ID?

  If upgraded using Anytime Upgrade, which means that the product key is already entered, the only thing you need to do is to activate by phone.

  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  I am trying to download Adobe premiere pro cc 2015 but it just says: error writing to the location of the temporary file, I need help!

  Clear your temp and tmp directories.

  Close your cc desktop app and restart as admin (win) or root (mac) user.  Next, install your cc applications.