Need help on setting up a notification for time pay a slowdown

Similar Questions

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad.

  I just reinstalled windows xp sevice pack 3 in my laptop. l need help to set up the wireless modem. My laptop is IBM ThinkPad and the modem is a construction in one. would appriciate ay help

  Hi bardhiboris,

  You can follow the steps from the link below: set up a wireless network:http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx

  Other links, please refer to: 10 tips to help improve your wireless network:http://www.microsoft.com/athome/setup/wirelesstips.aspx

  To set up automatic wireless network configuration:http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help to set up Linksys printserver with verizon wifi hotspot

  need help to set up Linksys printserver with verizon wifi hotspot

  pfsjmhall,

  Configure your wireless router to use these recommended wireless router settings, I use channel 11. I would use a new SSID to connect easier.

  Then configure the Linksys print server. Find your network to give your passkey (password)

  Then set up the printer, choose network and follow the instructions.

  Rick

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  Hello! I need help! I have the dvd for lightroom 5 and when I put it in my cumputer it dosent see DVD... What can I do?

  You can try to download instead of using the drive...

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Need help to set up voice VLAN in SG300

  Hello

  I spent too much time on it now and need help. I'm trying to set up a voice switch VLAN on a SG300 - 28 p. I need to charge a phone Cisco 7965 connected to a port on SG300 - 28 p to use VLAN 100, and a workstation connected to the phone to use Cisco 7965 on VLAN 101 by SG300 - 28 p. In the common Cisco IOS switches, this task is configured as follows:

  interface gi25

  switchport mode access

  switchport access vlan 101

  switchport voice vlan 100

  Trying to achieve this scenario with a Cisco SG300 switch turns into a nightmare. You will have to deal with a Dynamic of VLAN voice Auto Voice VLAN mode. Then, you must have a configured trigger and activated Automatic Smartport . I tried to do this in CLI nothing helps. Cisco 7965 receives an IP address of the access VLAN on Gi15 interface, which is 101 VLAN. I need to receive an address IP of the VLAN 100.

  The current configuration under Gi15 interface is as follows:

  interface gigabitethernet15

  activate the storm control

  broadcast storm control level kbit/s 10

  Storm-control include multicast

  port security throw trap 60

  maximum port security by 10 points

  port security mode max-addresses

  spanning tree portfast

  LLDP-med disable

  switchport mode access

  switchport access vlan 101

  ! next order is internal

  macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100

  Now, I don't know how the macro auto smartport dynamic_type unknown $native_vlan 101 $voice_vlan 100 command in the config, and I do not know how to remove it.

  When I try to enter the command macro auto smartport type ip_phone_desktop under Gi15 interface, I get the following error message:

  The $voice_vlan macro setting is not configurable by the user

  It seems that the auto attendant smartport macro ip_phone_desktop can not apply the setting $voice_vlan with a value of 100. In fact, I explicitly does not use this parameter to everything in the order of macro auto smartport type ip_phone_desktop ; However, the SG300 switch knows that the voice VLAN VLAN 100, and he's trying to use this VLAN ID as the value of the $voice_vlan parameter, the macro fails.
  

  I tried statically configure the voice VLAN on the switch SG300 using the command id of the vlan 100 voice , but I couldn't get the ip_phone_desktop macro to configure interface Gi15 correctly. Then, I removed the command id of the vlan 100 voice and obtained SG300 to learn his voice VLAN ID of UC560 connected to the SG300 through a trunk port based on the port configuration (connected to SG300) for the trunk of the next UC560:

  switchport trunk vlan 101 native

  switchport mode trunk

  switchport voice vlan 100

  Cisco-switch macro description

  This is the command switchport voice vlan 100 who announces to SG300 via CDP VLAN 100 is a voice VLAN. When I run the command show vlan local VoIP on the SG300, I get the following result:

  VLAN ID - VPT DSCP Source MAC address Interface

  1                    5          46       default           ----                    ---

  * 100 CDP e0:5f:b9:xx:yy:zz gi28

  Thus, it is clear that the SG300 receives information from UC560 via CDP in port Gi28 VLAN 100 is the voice VLAN. However, I can not always apply the ip_phone_desktop macro to SG300 Gi15 interface.

  Also, I tried to set up vState ofoithis vlan auto-déclenché as well as the commands in global configuration State vlan automatic voice activated mode. Or setting changes anything view voice VLAN announced at Cisco 7965 where Cisco 7965 continues to use VLAN101 (access the VLAN assigned to the interface Gi15).

  Hello telecastle,

  The Macro just get in the way most of the time. A default state on the switch a user will set the id of the vlan voice with orders

  (config) #voice vlan id 100

  * This will create the vlan 100

  VLAN, VoIP? * You can use to change your defaults for dscp and cos a long with all the other settings.

  State of vlan (config) enabled automatic #voice

  (config) #interface rank fa1-24

  (config-if-range) #switchport trunk vlan 101 native

  trunk (config-if-range) #switchport allowed vlan add 100

  * This function will define the vlan native on the trunk to 101 for the data port and vlan tagged will be 101 for the voice.

  CDP is enabled automatically and should learn the features of the phone and get on the phone to the vlan 101 on this port.

  CDP of the UC should automatically fill in the switch of the SG. You may need to upgrade the switch to the latest firmware however. Also make sure that the DHCP server for the voice if the CPU must be configured accordingly.

  Let me know if this helps.

  Cisco Small Business Support Center

  Randy Manthey

  CCNA, CCNA - security

• Need help, cannot set references to Photoshop.Application in VBA

  Hello

  I've used CS5 in the past and have had a VBA program works well (running in Access 2010) which went very well, open Photoshop 32-bit and controlled photoshop CS5 normally, allowing me to manipulate photos, read metadata, etc.  (It was my understanding that at least for CS5, programs including VBA script necessary to run the 32-bit version of Photoshop, not the 64-bit version).

  About 6 months ago, I installed CS6 and VBA program continued to work perfectly, as it always opens the 32-bit version. (I had to be sure that I was not running 64-bit Photoshop when I started the VBA program).  CS5 was still installed but not used.

  I just uninstall CS5, leaving CS6 installed.  For some reason, he left the program VBA disturbed in that the references (that you set in the window of the VBA code with tools > References) no longer seem to be valid.  I can't set a new reference to Photoshop.Application, and the program became unusable.  In other words, the "references" list is more typotheque Adobe Photoshop CS6 or Adobe Photoshop CS6 Object Library.  I've traveled to the C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \TypeLibrary.tlb file to add this reference manually.  The programs does not yet compile (for example, appRef As New Photoshop.Application Dim causes an error "User Defined Type not defined").  I get the same failure to compile if I search for and install a reference to the 32-bit version, C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\TypeLibrary.tlb.  In the past, I also had a reference to the 'Adobe Photoshop CS6 Object Library".  I tried manually to C:\Program Files (x 86) \Adobe\Adobe Photoshop CS6\Photoshop.exe or the 64-bit version of Photoshop.exe, but these files are not accepted and I do not otherwise know the location of the file from the object library.

  I so need help from someone who knows how to solve this problem in the transition of CS5 at CS6 to use VBA.

  Thank you

  EGibbon

  There are global keys which crushed with every version of Photoshop. Photoshop.Application gets for example set for each installation of Photoshop. When you have uninstalled CS5 these keys got deleted.

  You can install CS6 again? You don't need to uninstall. Just install again if it will let you.

  I have a script that wil set them, but I don't really like to use it on other machines of people as it messes with the registry and I don't want to make it worse for you.

• Need help to set a DELETE statement.

  I have a table that contains the records of files. Files come in a bouquet each week. So, we need to delete records from a table to the corresponding fields and load the table with up-to-date data.
  
  In doing so, the DELETE statement takes a long time. Need help with this setting.
  
  Here are the details.
  
  (1) total number of records in the table: 23 million records.
  (2) approximate records deleted each time: 500 K to 1.5 million.
  (3) table is partitioned on a PERIOD key. That is, each partition will have the data for a given period.
  (4) table is not indexed
  (5) removal occurs on a combination of 2 fields (PERIOD + BATCH).
  
  Here is the query and the plan:
  
  ===========================================================
  
  SQL > EXPLAIN PLAN SET STATEMENT_ID = 'TSH' FOR
  2 REMOVE / * + PARALLEL(DETAIL_UNKNOWN,10) * / u DETAIL_UNKNOWN
  3 WHERE u.FLBATCHID = 'PCAFRINTERMAR1105' AND u.N_PER6 = 201214
  4;
  
  He explained.
  
  SQL > SET LINESIZE 130
  SQL > SELECT * FROM TABLE (DBMS_XPLAN. DISPLAY ('PLAN_TABLE', 'TSH', 'ALL'));
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Hash value of plan: 2400300449
  
  ----------------------------------------------------------------------------------------------------
  | ID | Operation | Name | Lines | Bytes | Cost (% CPU). Time | Pstart. Pstop |
  ----------------------------------------------------------------------------------------------------
  | 0 | DELETE STATEMENT. 596K | 12 M | 838 (9) | 00:00:12 |
  | 1. REMOVE | DETAIL_UNKNOWN |
  | 2. SIMPLE HASH PARTITION | 596K | 12 M | 838 (9) | 00:00:12 | 6. 6.
  |* 3 | TABLE ACCESS FULL | DETAIL_UNKNOWN | 596K | 12 M | 838 (9) | 00:00:12 |
  ----------------------------------------------------------------------------------------------------
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Name of the query block / Alias object (identified by the operation identity card):
  -------------------------------------------------------------
  
  1 LED$ 1
  3 LED$ 1 / U@DEL$1
  
  Information of predicates (identified by the operation identity card):
  ---------------------------------------------------
  
  3 - filter("U".") FLBATCHID '= 'PCAFRINTERMAR1105' AND 'U'." N_PER6 "= 201214)
  
  
  PLAN_TABLE_OUTPUT
  ----------------------------------------------------------------------------------------------------
  Projection of the column information (identified by the operation identity card):
  -----------------------------------------------------------
  
  2 - (cmp = 2, 3) "U". ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  3 - « U ». ROWID [ROWID, 10], "U". "N_PER6" [NO.22], 'U' "." " FLBATCHID ' [VARCHAR2, 20].
  
  27 selected lines.
  
  ===========================================================
  
  Need your suggestions on how the query / table can be tuned.

  Hi Anand,

  I wanted to check why your tkprof Watch report two executions of the statement:

  call     count       cpu    elapsed       disk      query    current        rows
  ------- ------  -------- ---------- ---------- ---------- ----------  ----------
  Execute      2   2315.71    2480.17          0       3351     624489      611765
  

  In fact, it there was only a single execution of the DELETE statement. The trace file begins with a call EXEC of any statement without call analysis

  *** TRACE DUMP CONTINUED FROM FILE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_ora_241708.trc ***
  
  EXEC #1:c=20000,e=13996,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=0,tim=32472879711702
  =====================
  PARSING IN CURSOR #2 len=68 dep=0 uid=72 oct=42 lid=72 tim=32472883567994 hv=740818757 ad='0'
  ...
  

  TKProf aggregates this EXEC call with call EXEC of the DELETE statement because they have the same location of cursor (#1), he thinks it was the same cursor.

  PARSING IN CURSOR #1 len=93 dep=0 uid=72 oct=7 lid=72 tim=32472889974030 hv=1242910589 ad='e5979d80'
  DELETE from detail_unknown where n_per6 = 201214 and FLBATCHID = 'PCAFRINTERMAR1105'
  END OF STMT
  PARSE #1:c=0,e=11462,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,tim=32472889974024
  ...
  EXEC #1:c=2315710000,e=2480213492,p=0,cr=3691,cu=624489,mis=0,r=611765,dep=0,og=1,tim=32475370187626
  

  So, the question about two executions is closed - there was only a single run.

  The performance - 2315,71 seconds of time processor is absolutely huge for such amount of work. It looks like a bug.

  First, I propose to check the time without compression. If your environment allows this kind of testing try to decompress the partition and re - run on unpacking data DELETION.
  10.2 find the name of the partition

  select partition_name
    from dba_tab_partitions
   where table_name = 'DETAIL_UNKNOWN'
     and partition_position = 6
  

  After that

  alter table DETAIL_UNKNOWN modify partition  nocompress;
  alter table DETAIL_UNKNOWN move partition ;
  

  and run again the button DELETE.

  What is the operating system on the server?

• Need help to set up version control

  I would like to set up version control for DreamWeaver CS 6.

  I go to manage the web site and enter the version control.

  Can you please advise what informaiton I enter server address and repository path configuration?

  I received a message that Dreamweaver disbable check-in and check-out when enable version control.

  Can you please let me know that DreamWeaver does support both 2 functions at the same time?

  Is Dreamweaver version control account that I need to buy and install the version that server controls to make version control works?

  Your information and your help is much appreciated,

  Kind regards

  Iccsi,

  You must have access to a SVN server and a SVN repository before you start this set up. For more information about SVN, see the

  Subversion at http://subversion.apache.org/Web site.

  Yes, DW includes only support for SVN. You must install a SVN server and repository manually from the link above before you can set it up in DW.

  -ST

• Need help to set up parental controls

  Hello

  I want to set up parental controls on my son's laptop computer.

  Thus, users are

  His name

  Director of comp.

  Password protected

  not monitored by family safety

  I thought that I could not / would not set up on the administrator, so I created a second user

  His name1

  standard user - control parental on

  no password

  monitored by family safety

  I have implemented controls, but they are not in force, I guess, because they should be on his main user? If this means that it can change the settings since this is admin?  I'm confused :(

  Hi Dee2537,

  We are happy to help you set up parental controls in your son's laptop computer. Given the information you have provided, we see that you addressed some of the scenarios where parental control will not work correctly. One of it is implemented in your child as an administrator's account. Family safety not restrict and recognize the account as a child, if the application detects that it is using an administrator account. The other implements access to his account without password because Family Safety requires that the user has a password to secure the account. Because you have pain to configure the account correctly, we strongly recommend that you follow the instructions step by step on how to set up on behalf of the child in the family security and laptop to your son.

  Here is the link where you can find the complete steps: setting up parental controls

  Please let us know if you need more help and we will help you the best we can.

  Thank you.

• I need help to set up the linksys adsl router

  Hello world!

  I have LINKSYS WIRELESS - N HOME ADSL2 + MODEM ROUTER (wag120n) and I connect to the internet via the cable that I took my friend who already SPEEDTOCH ADSL ROUTER, I bought the d-link wireless card and I install it in one of my PC
  what I need is to set up my linksys wireless router for my two PCs, on via the wireless and another an ethernet cable, how can I do?

  thanks4all

  Follow this link to configure the router.

• Need help to set up AP 1142 standalone

  Hi all

  Need help. I am trying to configure Cisco Aironet 1142 standalone, this access point has been previously connected to WLC and the previous post, I found that we need to delete and reload the AP

  private-multiple-fs, c1140-k9w8 - mx.124 - 21A .JHA

  Now when I try to configure the IP address for the AP, he is in error:

  Ip address of AP1142 #lwapp ap 10.61.1.151 255.255.255.0
  ERROR! Command is disabled.
  AP1142 #.

  Current flash content:

  AP1142 #dir
  Directory of flash: /.

  2 - rwx 10264 March 1, 2002 01:25:57 + 00:00 private-multiple-fs
  3 - rwx 90396 March 1, 2002 01:18:04 + 00:00 event.log
  drwx-5 128 1 March 2002 00:12:24 + 00:00 c1140-rcvk9w8-mx
  8 - rwx 0 March 1, 2002 01:26:06 + 00:00 config.txt
  9 - rwx 337 March 1, 2002 01:18:04 + 00:00 env_vars

  total 32385024 bytes (30019584 bytes free)
  AP1142 #.

  Please let me know whatelse is required for the configured in stand-alone mode access point.

  Thanks in advance

  The image that is on the device's LWAPP, not the autonomous... If you want to use the AP autonoous mode then the image must be W7... It's...

  C1140-k9w7 - mx.124 - 21A .JHA not c1140-k9w8 - mx.124 - 21A .JHA.

  Please feel free to download any image from the below link and perform the conversion of image LWAPP to stand alone...

  http://tools.cisco.com/support/downloads/go/PlatformList.x?sftType=IOS+Software&mdfid=282439881&treeName=Wireless&mdfLevel=Model&url=null&modelName=Cisco+Aironet+1140+Access+Point&isPlatform=N&treeMdfId=278875243&modifmdfid=null&imname=&hybrid=Y&imst=N

  the methos to convert is...

  Download TFTPd32 of google and install it on your PC... point of the image that you downloaded on the TFTP server.

  Connect a cable ethernet between your notebook and AP... both should be on the same subnet... Connect a cable from the console and access the hyperterminal console with the command...

  AP > en

  AP #debug lwapp console cli or debugging console cli capwap

  T AP #config

  AP (confg) int FA 0

  AP(confg-IF) ip addr (same subnet as the laptop)

  End AP(confg-IF)

  Force - reload DOWNLOAD - AP #archieve sw / overwrite tftp: / /.

  This will solve the problem...

  Concerning

  Surendra

• need help to set the access rights of a vmware server 2.0.1 on vmware image

  Hello!

  I have a vmware (running ubuntu server 9.04) image that was created with a vmware server installation varsion 1.0.9. now I decided to upgrade to the host, which means that the host totally changed: new equipment, new OS, new vmware-server-version: 2.0.1

  My problem atm is, I may not know, what would be the appropriate access rights (chown/chmod) for this vmware image. during the installation of vmware server 2.0.1 I was asked to specify some 'administrative user' where I took the an im working with Linux itself (lets call it "user").

  so, when I copied the old vmware image in the data store (/ var/lib/vmware/VirtualMachines for me), chown-ed the folder including all files init by A, setting chmod to something like 600, the console vmware (web surface) told me that there were several problems with the image and couln can't be started etc. etc. etc...

  I played with several rights to the image and the only thing that seemed to help was setting the folder and all files included in 'root' with the command chmod chown '777'... not what I would call 'secured '.

  so: how to set the access rights for the virtual machines? I want that they have only minimal rights as possible and especially nothing like root: 777...

  My static VM files, as in those who are not dynamically created when the virtual machine starts, are the property of root, root of group with permissions of 711. Root is the user that I have chosen as the admin user when you run vmware - config.pl. My users do not have direct access to this server, so I'm not too worried about the permissions. You can give different rights for different users to different virtual machines, creating roles and their allocation to users/groups. On that, the details are in Chapter 10 of the user guide - http://www.vmware.com/pdf/vmserver2.pdf.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Need help to set up VMware Fusion 2

  I am trying to configure VMware Fusion 2 and need help with the proper way, access this topic.  I have a Mac Pro with XP Pro installed via Boot Camp.

  One of my hard drives is 1 TB that I dedicated 300 GB to Windows and installed XP Pro with Office 2007, MS Flight Simulator and a few other programs. The rest of the disc is for Mac stuff. I intend to run MS Flight Simulator natively via Boot Camp, but want to run Office and a few other programs via VMware Fusion 2.

  VMware Fusion 2 is installed on the computer, but I'm confused by how to configure. Should what steps I take to do this?

  Normally, if there is a Boot Camp partition with Windows installed VMware Fusion detects it automatically and complete an entry on the library of Virtual Machine named Boot Camp partition and you simply double-click and he should be executed even if the first time it is run it through a preparatory process that takes a few minutes.

  That being said there are several reasons why the Boot Camp partition might not automatically appear on the Virtual Machine library and to the solution the simplest it's Fusion of closing and reopening it however if it doesn't then it becomes more difficult to diagnose and fix if possible.

  Also, there are a problem experienced during the Boot Camp partition is located on a drive more than 950 GB and a 1 TB HARD drive should show about 931 GB I don't know exactly what Fusion studies in this area to determine her size but I think that the issues that I have seen posted the deal with more than 1 TB HARD disk as in the post in this search result link: the search results for 1.5 GB Seagate.

  You can also try to manually create a virtual hard disk that is then more metadata pointing to the raw disk and manually create a partition Boot Camp Virtual Machine around that but I do not have the necessary parameters to stop this Boot Camp partition manually created the Virtual Machine to take snapshots or being suspended unless someone VMware will show what these settings are for Fusion 2.x I am reluctant to give directions as it would be dangerous to run with these capabilities on a manually created partition from Boot Camp Virtual Machine.

  Other reported problems treated with NTFS - 3G installing stopping the Boot Camp partition to be recognized automatically and have to temporarily uninstall NTFS - 3 G.

  He had to see what he says in System Profiler for the hard disk on which you have Boot Camp.  Select the target Serial - ATA drive and copy and paste the information for this drive in a response.