Need help on the problem.

How can I change this url www.sanchezarts.com/contact-us.html - to - www.sanchezarts/contactus?

It's really not something you can Muse. You may need to contact your hosting provider for more information based on their server set up.

Search Google for "URLS without extension" displays a lot of information.

Tags: Adobe Muse

Similar Questions

  • Need help with the problem of the form

    I created a web site in a test directory on my domain. It includes 3 forms. all forms work properly.

    I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page. The message is about the field of the captcha Image verification

    You can see the problem here;

    http://www.telluridegravityworks.com/contact.php

    and here:

    http://www.telluridegravityworks.com/winter-rental-Form1.php

    I used a product called FORMfields for this. I was abel to create what was needed but found a little hard to use FORMfileds. In addition, they do not answer your questions and provide no support at all. I'm stuck out of these forms and need to do their job. I have re-uploaded everything and did everything I could think just shoot this but I can't seem to understand.

    FORMfileds assistance:

    I get the error checking of the Image on the page config.php.

    The "test your installation by going to . http://www.telluridegravityworks.com/FormFields/examples/paths/contact_us1.php . ' load and display correctly. .

    Can anyone offer advice or suggestions on why I am now hhaving this error on 3 forms?

    Thanks in advance for any help.

    Thread moved to the Dreamweaver application development forum, which deals with PHP and other issues aside server.

    markf12 wrote:

    I moved the site to a new domain. I have everything flies with filezilla and everything looks good except for the forms. All of them display an error at the top of the page.

    Here's the first messages of two error on the first page point you to that:

    Warning: session_start() [Function.session - start]:

    Open (/ home/users/web/898/moo.telluridegravitywork/cgi-bin/tmp, /sess_3a796794467996fdecff8703c5826cf1, O_RDWR) failed: no such file or directory (2) in php/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField on line 52



    Warning: session_start() [Function.session - start]: Cannot send session cookie - headers already sent by (output started/hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php:52) in / hermes/web01/b898/moo.telluridegravitywork/FORMfields/src/fields/ImageVerificationField. php on line 52

    The first message tells you it can't open a file or a directory and gives the name of the file it is trying to open. The second message tells you that the headers have already been sent, and it tells you where production started.

    Read the two locations, and there's a possible clue to the problem. Your script is looking for a temporary on/home/users/web/898 file, while your script is on/hermes/web01/b898.

    Without knowing more about the script you use, it is impossible to solve a problem on the server side. But it seems you need to do something to correct the location of your script uses to store temporary files.

  • BSOD-need help solve the problem.

    Hi, my computer just BSOD would for the first time and I have the analysis of the dmp file, can someone tell me the problem and how to solve?

    Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
Online Crash Dump Analysis Service
See http://www.osronline.com for more information
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
Machine Name:
Kernel base = 0xfffff800`03008000 PsLoadedModuleList = 0xfffff800`0324b890
Debug session time: Fri Oct  3 19:15:42.940 2014 (UTC - 4:00)
System Uptime: 2 days 19:08:57.924
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

NTFS_FILE_SYSTEM (24)
    If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
    parameters are the exception record and context record. Do a .cxr
    on the 3rd parameter and then kb to obtain a more informative stack
    trace.
Arguments:
Arg1: 00000000001904fb
Arg2: fffff8800c77b558
Arg3: fffff8800c77adb0
Arg4: fffff8000303d7a1

Debugging Details:
------------------

TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2

EXCEPTION_RECORD:  fffff8800c77b558 -- (.exr 0xfffff8800c77b558)
ExceptionAddress: fffff8000303d7a1 (nt!FsRtlUninitializeFileLock+0x0000000000000011)
   ExceptionCode: c0000005 (Access violation)
  ExceptionFlags: 00000000
NumberParameters: 2
   Parameter[0]: 0000000000000000
   Parameter[1]: 0000000800000018
Attempt to read from address 0000000800000018

CONTEXT:  fffff8800c77adb0 -- (.cxr 0xfffff8800c77adb0)
rax=fffff8a0113fed40 rbx=0000000800000000 rcx=0000000800000000
rdx=fffff8a0113feb70 rsi=0000000000000705 rdi=0000000000000705
rip=fffff8000303d7a1 rsp=fffff8800c77b790 rbp=0000000000000706
 r8=0000000000000000  r9=0000000000000000 r10=fffff8a0113feb40
r11=fffff8a0113fec70 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=fffff8a0113feed8
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
nt!FsRtlUninitializeFileLock+0x11:
fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h] ds:002b:00000008`00000018=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".

EXCEPTION_PARAMETER1:  0000000000000000

EXCEPTION_PARAMETER2:  0000000800000018

READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b5100
GetUlongFromAddress: unable to read from fffff800032b51c0
 0000000800000018 Nonpaged pool

FOLLOWUP_IP:
Ntfs!NtfsDeleteScb+240
fffff880`012c6a70 e972feffff      jmp     Ntfs!NtfsDeleteScb+0xb7 (fffff880`012c68e7)

FAULTING_IP:
nt!FsRtlUninitializeFileLock+11
fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h]

BUGCHECK_STR:  0x24

LAST_CONTROL_TRANSFER:  from fffff800030c6b7e to fffff8000303d7a1

STACK_TEXT:
fffff880`0c77b790 fffff800`030c6b7e : fffffa80`6666744e fffffa80`000003ab fffff8a0`113feed8 00000000`00000000 : nt!FsRtlUninitializeFileLock+0x11
fffff880`0c77b830 fffff880`012c6a70 : fffff880`0c77b8e8 fffff880`0c77b8e8 00000000`00000705 00000000`00000705 : nt!FsRtlFreeFileLock+0xe
fffff880`0c77b860 fffff880`012cacdb : 00000000`01010000 fffff8a0`113feb70 00000000`00000000 fffffa80`00000028 : Ntfs!NtfsDeleteScb+0x240
fffff880`0c77b8a0 fffff880`01244343 : fffff8a0`114bcb60 fffff8a0`113fec70 00000000`00000000 fffff880`0c77ba12 : Ntfs!NtfsRemoveScb+0x5b
fffff880`0c77b8e0 fffff880`012c8a3c : fffff8a0`113feb40 fffff800`03223280 fffff880`0c77ba12 fffffa80`145e1570 : Ntfs!NtfsPrepareFcbForRemoval+0x53
fffff880`0c77b910 fffff880`0124ba52 : fffffa80`145e1570 fffffa80`145e1570 fffff8a0`113feb40 fffff880`0c77ba00 : Ntfs!NtfsTeardownStructures+0xdc
fffff880`0c77b990 fffff880`012d82d3 : fffffa80`0fa2f180 fffff800`03223280 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
fffff880`0c77b9d0 fffff880`0132ad32 : fffffa80`145e1570 fffff8a0`113fec70 fffff8a0`113feb40 fffffa80`0fa2f180 : Ntfs!NtfsCommonClose+0x353
fffff880`0c77baa0 fffff800`03087261 : 00000000`00000000 fffff800`03374c01 fffffa80`169e8b00 00000000`00000002 : Ntfs!NtfsFspCloseInternal+0x186
fffff880`0c77bb70 fffff800`0331973a : 00000000`00000000 fffffa80`169e8b50 00000000`00000080 fffffa80`0ca715a0 : nt!ExpWorkerThread+0x111
fffff880`0c77bc00 fffff800`0306e8e6 : fffff880`02f65180 fffffa80`169e8b50 fffffa80`15f64640 00000000`00000246 : nt!PspSystemThreadStartup+0x5a
fffff880`0c77bc40 00000000`00000000 : fffff880`0c77c000 fffff880`0c776000 fffff880`0c77b8a0 00000000`00000000 : nt!KxStartSystemThread+0x16

SYMBOL_STACK_INDEX:  2

SYMBOL_NAME:  Ntfs!NtfsDeleteScb+240

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: Ntfs

IMAGE_NAME:  Ntfs.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  52e1be8a

STACK_COMMAND:  .cxr 0xfffff8800c77adb0 ; kb

FAILURE_BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240

BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240

Followup: MachineOwner
---------

    Great, keep me updated on the situation of the accident and let me know if it worked.

    Kind regards

    Patrick

  • I need help for the problem event name: BlueScreen. Help, please...

    Problem event name: BlueScreen
    OS version: 6.1.7600.2.0.0.768.2
    Locale ID: 1033

    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA8007D53010
    BCP2: FFFFF88006CEAC48
    BCP3: 0000000000000000
    BCP4: 0000000000000002
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 768_1

    Hi Vikram,

     

    Thanks for posting the question in the Microsoft Community!

    You get the blue screen error in the computer.

    To work with the issue, I suggest you to visit:

    Resolve stop (blue screen) error in Windows 7

    http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

    Note: When checking a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.

    Note: When you format a disk, all data will be lost.

     

    It would be useful for us to identify the problem, if you could upload the dump file.

    You can use the Sky-drive to download the dump file. Check the link for the steps on how to download Sky-Drive.

    http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65.

    The location of the dump file is C:\Windows\Minidump\.

  • Need help with the problem of the taskbar.

    So I cleaned my mouse and I hit him some key combinations on this subject and it made my task bar 2 times the height, he was. I can't find how to turn back. Any help?

    Right-click on the taskbar and unlock it. Place the cursor on the top edge to get the double arrow then left click and drag it to the bottom. Lock the taskbar.
     

  • Need help with the button mute on my helmet XL-3000 of Microsoft Chat, please!

    Hi all!  Hope everyone is having a good TGIF!  If you use my helmet even, I need help understanding the region button mute in the middle of the rope.  The red light is on or off?  I suppose that if I hit the curve button with the microphone on this subject, and the red light, I'm turn off my mike?

    I did some tests with others on the phone calls.  Sometimes, some other hear me, sometimes they do not have.  BUT I NEVER HEAR THEM!  FOR MY WORK, IT IS IMPERATIVE THAT I MAKE CALLS TO OTHERS!  HELP PLZ!  Thank you very much and have a great wkend!

    Hello
     
    Please follow the links below to troubleshoot the computer.
     
    Method 1
     
    Connect one microphone, music player or other audio device to your computer

    Method 2

    Step 1

    Troubleshooting: headsets

    Step 2

    Open the troubleshooting of Audio recording

    Method 3

    How to adjust the microphone volume

    a. click Start, type mmsys.cpl in the search box and press ENTER.
    b.     in the sound dialog box, click the recording tab.
    c. click Microphone, and then click Properties.
    Note Make sure that the work appears under Microphone. If the job does not appear, click Microphone, and then click on set as default.
    d. the Microphone Properties dialog box, click the custom tab.
    e. select or clear the box amp Microphone.
    f. click the levels tab.
    g. set the volume to the desired level, and then click OK.
    h. click OK to close the sound dialog box.
     
    How to adjust the setting of the voice
     
    a. start the game.
    b. connect to LIVE (the Guide).
    c. click personal settings.
    d. click on voice.
    e. make sure that the recording volume level indicator records at a bar when you talk.
    f. click done.

    If you are still facing problems then, I would say that you contact support for Microsoft hardware for more direct intervention.


    I hope this helps.

     

  • Need help with the launching track pack for forza code 4

    Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.

    This is the help I get when the cat to an Ambassador xbox on xbox.com

    Terry wrote:
    Need help with the launching track pack for forza code 4
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Location of Ambassador of the community...
    The Xbox Ambassador says:
    Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
    The Xbox Ambassador says:
    Hello
    Terry wrote:
    Hello
    The Xbox Ambassador says:
    Hey
    Terry wrote:
    just to be on the phone to xbox live support and was told to come here
    The Xbox Ambassador says:
    ok\
    The Xbox Ambassador says:
    What is your problem?
    Terry wrote:
    I bought the 4 for forza ansd 360 new sealed Christmas...
    Terry wrote:
    has got 2 codes that accompanies the game but the pack track code does not work
    The Xbox Ambassador says:
    Wow good
    Terry wrote:
    whenever I put in the code it says code redeemed
    The Xbox Ambassador says:
    I think the code is used. You must return to the retailer
    Terry wrote:
    I tried to, but since I already opened the case they will not accept
    The Xbox Ambassador says:
    Oh. No,
    Terry wrote:
    the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
    The Xbox Ambassador says:
    Maybe it was auto bought?
    Terry wrote:
    so, how do I get another code generated track Pack if defective?
    The Xbox Ambassador says:
    I do not know.
    Terry wrote:
    bought the game new, so I get the track pack
    The Xbox Ambassador says:
    Oh. It's bad.
    The Xbox Ambassador says:
    I think that if you Exchange 1 code it will buy it
    Terry wrote:
    car pack code worked, starter pack did not work
    The Xbox Ambassador says:
    Oh.
    The Xbox Ambassador says:
    It's a bad
    The Xbox Ambassador says:
    BTW you have an evolution of the tests?
    Terry wrote:
    Yes, I want to? but more anxious to get a code object generated for this pack
    The Xbox Ambassador says:
    Hey if I help can u give me this game too?
    Terry wrote:
    ?????????????????
    Terry wrote:
    So is it possible to get a code for that time?
    The Xbox Ambassador says:
    Hey
    The Xbox Ambassador says:
    Yes.
    The Xbox Ambassador says:
    you need to contact them
    The Xbox Ambassador says:
    and tell them that the code is used.
    Terry wrote:
    I was told to come here? where can I go to get the code?

    Hi Terryg76,

    ·         What version of the operating system is installed on the computer?

    I suggest you to contact the game manufacturer for more help and information.

  • When I start the machine, continuous hard drive work for almost 1/2 hour, meanwhile if I open a program, the machine runs very slowly. Help solve the problem please

    I have wndow XP Home edition service pack 3 installed on my lap top. When I start the computer the hard drive continues to work for almost 1/2 hour; Meanwhile, if I open IE, or any program, the machine runs very slowly and I just can not open the program up until the drive hard light is off. Please help solve the problem

    How much RAM you have on your system? (Right click on "My Computer"-> properties)

    As a general rule, Windows XP does not work well if you have less than 1 GB or more of RAM.  What usually happens is that your RAM capacity is exceeded leading to overflow on virtual memory (the drive) to compensate for the need of RAM in the computer.  This causes your system to beat on your hard drive and slow down your system.

    If this is your problem, the options are to increase the RAM on your system or decrease the non-essential programs that launch at startup on your computer using a tool like Autoruns.

    HTH,
    JW

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • I need help with a problem of file softdub.dll any answers or how to replace it?

    I need help with a problem of file softdub.dll all the answers, or how to replace it?  Yes, it's a problem of Vista vs itunes and apparently I lost? This file somehow.  I have no idea how blessed remedy.  I tried all the normal fixes / easy I know, but I am a novice at best.  so please, be gentle and try to guide me through a response.  Please, I beg you!

    Hello

    Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

    If you don't have anything done, see if this information helps you.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

    http://support.Apple.com/kb/HT1923

    If the advice already given does not, please contact Apple for assistance.

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    See you soon.

  • Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem.

    Hello! A few days ago, I, disabled Photoshop subscription (CC of Lightroom and Photoshop CC) Act in accordance with your instructions, I have not be enabled. Please help solve the problem?

    Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  • Hello need help with the opacity mask.

    Hello need help with the opacity mask. I hope someone out there can help

    I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

    However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

    The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

    The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.

    Screen Shot 2015-08-06 at 12.26.48.pngScreen Shot 2015-08-06 at 12.00.10.pngScreen Shot 2015-08-06 at 12.01.16.png

    The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

    Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

    What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

    The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

    Screen Shot 2015-08-06 at 12.44.21.pngScreen Shot 2015-08-06 at 12.44.36.png

    I hope someone can help. Very appreciated


    See you soon

    Dave

    Dave,

    I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

    Illustrator help | Transparency and blending modes

    represents the masking objects.

    Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

    I think that it is perhaps the issue.

  • I need help on the colors in first pro.

    I need help on the color in general information.

    http://www.YouTube.com/watch?v=vLEGtzyZ0Fs

    I made this video in AfterEffects and exported in color 16-bit png sequence.

    I then imported in first pro and added audio and some titles at the end.

    Now, I want to do is have a perfect version that I could watch on my pc.

    I used Mp4 h 264 to compress the video and it is on youtube.

    I think that this compressor support only 8-bit color because there are bands in the sky.

    Now, I have to make a version which is of very high quality that I can watch on my pc... I tried several codecs and it does not work.

    The problem is so long that there something on top of the png sequence in premirere pro as an image or something, it's like

    the displacement of the image in 8-bit color mode.

    It's using Avi Lagarith lossless codec

    Before there is a picture on top...

    ImageA.png

    Just after that, the image appears... As you can the there are a few bands on this image.

    I know it's subtle, but I want to know why this is happening.

    ImageB.png

    Is there something I'm missing... I took much too long to try to fix this.

    I ended up using the Quicktime animation codec for my video. The problem does not occur with this one, and I can't see any decline in the quality of the image.

    Now, I have a file compressed at low cost for online viewing and a huge file that I can watch on my computer.

    On a side note, can you guess how many hours it took for my computer make the png of this video sequence... 12 HOURS!

    Should I get a new computer...

    Thanks for the reply!

  • need help with the mac version of PES

    need help with the mac version of PES

    If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

    and activate it with your serial number.

    If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

    p.s. If you need a more direct link, you must specify the exact version you want.

  • Making the ear of corn and need help with the ball.

    I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

    http://images.clipartof.com/sweet-corn-on-the-cob-with-husk-royalty-free-vegetable-stock-photo-by-kennygadams-4501068853.jpg

    http://image.shutterstock.com/display_pic_with_logo/660550/660550,1298544740,8/stock-photo-ripe-corn-vector-illustration-on-white-background-71847955.jpg

    http://static5.depositphotos.com/1012047/533/v/950/depositphotos_5336961-Corn-oil.-Stylized-drop-of-oil-and-corn-cob..jpg

    I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

    Tank,

    You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

    Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

    I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

    You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

    Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

    If the above consists of:

    Three roads closed, 8 points each, with ordinary linear degrees

    Three mixtures of open path with three anchor points for each key path

    Six paths closed for shadows / highlights, with 19 points in total

    Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

    Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

    JET

Maybe you are looking for