Satellite P300 - control buttons do not work after cleaning keybord

Similar Questions

• Satellite L855 - FN buttons do not work after upgrading to Win 8

  Hi all... I had updated my Windows 8 Satellite and I followed the instruction guide.
  After the update the fn keys do not work correctly:

  I can't adjust brightness Display
  I can't use the multimedia shortcut
  I can't turn the volume
  I can't set power button wifi bluetooth, but only switch to airplane mode

  Thank you

  Hello

  Have you installed the upgrade wizard to win 8?
  The upgrade wizard to win 8 allows you to get all the drivers Win 8.

  In General, the FN buttons are controlled by VAP (value added package)

  > I can't switch Bluetooth Wi - Fi, but only switch to airplane mode
  Air airplane mode disables the BT and WLan as well, that's how it works in Win 8

• Control buttons do not work after the new installation OS on Equium A100-147

  After Installing Win XP manually, I am facing problem for the multimedia keys on the left side of the laptop work.

  I am able to access the first button to launch Internet Explorer and Windows Media Player but still keys Play/Stop / > /.< not="" working="" with="" windows="" media="">

  I read in these forums that these keys work only with WinDVD or Windows Media Player with CD/DVD in. But I was able to use these keys with MP3 files in Windows Media Player.

  I don't want to use the restore CD.

  Thanks for your reply.

  Hello

  Of course you can use it with mp3 files. The files are probably listed in the WMP library, and you can use all of the buttons. There is nothing unusual.

  If you cannot use all those buttons in WMP when music CD is in the drive or you if the WMP library is open I recommend you remove TOSHIBA controls reboot the device and install again. Maybe it will work again.

• Equium P300 - control buttons do not work currently running Win XP

  Hi, I'm looking for help with a problem with a laptop Equium P300.

  This is my brother's laptop, he bought about 18 months ago, it came with Vista, he did not want what he preferred to have XP, so I changed the XP operating system by using the drivers available on the Toshiba Web site, update the appropriate drivers.

  This has worked well for the last 18 months, however, recently, when the laptop is off, touch-sensitive shortcut keys remain lit, even when disconnected from the power supply and do not work.
  Previously, if it has been disabled and you press one of the keys shortcut the laptop turns on but is no longer doing this.

  I wonder if anyone has had this experience before?
  Anyone have any suggestions on how to fix this or even what the cause of the problem?

  Thanks in advance for any help you can offer

  Keith

  Hello

  You use Win XP on this laptop, then you must update the BIOS because there is a special BIOS for Win XP!
  In addition, the Toshiba multimedia control buttons are controlled by tool controls of Toshiba. You can download it from the page of the Toshiba driver.

  Regarding the buttons of enlightenment;
  AFAIK you can enabled and disable in the BIOS itself!
  Check the BIOS settings,

  Welcome them

• Re: Satellite A300 controls buttons do not work

  Command buttons on my new Satellite A300 for volume ect. have stopped responding to my touch. They are only half lit as they are caught between fading and. They used to work, but now they do not have. I reinstalled the package Toshiba value added but that doesn't seem to work.

  Soon, Levi,.

  Hello

  You mean all Toshiba control buttons (IE pause, play, stop, lighting, etc.) don t work yet, you have installed the new VAP?

  One of my friends had the similar problem and he has reinstalled the VFR too.
  Unfortunately, it has not been helping :(
  Something was confusing upward.

  He used the recovery disc and then everything worked again

  I don't know why this happened, but maybe it has something to do with MS updates

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• Control button does not work after the opening of Messages

  When I open the application Message, command suddenly stops working. I can't command-tab to switch applications, for example. This happens everytime I open messages; It is clearly linked.

  I'm under 10.11.6 on MacBook Pro (retina, 15 inch, mid-2015).

  Hello crabman230,

  Welcome to Apple Support communities.

  I see that when you open the messaging app, you can not command + Tab to change the applications. This only happens when the Messages app is open. I understand how difficult it can be for a feature works not when a specific application is open, and I imagine that you are probably ready to get this resolved. I have a few things I want to try.

  First, let's go ahead and give a fresh restart your MacBook Pro. Go to the Apple menu > restart. A time you've restarted, open the messaging app and test the command + Tab to see if you get the same result.

  Then, restart your computer in safe mode. Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. Once you're in safe mode, open the messaging app and test new command + Tab. The following article will help you start in safe mode:

  OS X El Capitan: start in safe mode

  Finally, if you still continue to have a problem, create a new user and test again. In a new user test can help circumvent the problem of the current user to the system. This article will help you:

  OS X El Capitan: set up users on your Mac.

  See you soon!

• iPhone 5 home button does not work after ios 10

  My 5 Iphone Home button does not work after update final IOS version of 10.

  The home button works on the first push to wake the phone but it will not open the phone the second button.

  I activated the assist button, which does not work either. But what I discover is if I open device for assistance then touch and lock screen click on the button home will work once to open the phone. If I open any app I can't close it unless I go through the same routine.

  You attempted to restart your phone?

  You can do so by holding the sleep/wake button and the Home button simultaneously until the Apple logo appears

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• Envy 15: Airplane Mode button does not work after update of Windows 10

  My airplane on my HP envy mode button will not work after the upgrade to Windows 8.1 for Windows 10. I can turn on and off airplane Mode but not the button. Grateful for the help

  Hello:

  The only suggestion I can offer would be to see if installing the W10 wireless button driver solves the problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150986_1&swEnvOid=4192

• Satellite U500-1F5: eco and FN buttons do not work after BIOS update

  Hello world

  I hope I can find a solution for my problems here.

  I bought a new Toshiba Satellite U500 (PSU9ME),
  I'm updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center.

  Last week I received an alert to updat the BIOS and I did. Since then, I've noticed the following problems:

  1 eco utility does not work, and when I tried to uninstall, it says (not supported BIOS)
  2. on screen funtion buttons that appear at the top of the screen when you press the Fn key no longer not apear
  3. the touchpad lock / unlock button does not work, and even by pressing Fn + F9 doesnot lock

  I hope you can give me an answer about my problems,
  I already downloaded the latest updates for the eco and value-added packege of the toshiba site and install,

  BUT

  does not my prob

  still eco utility does not work. The msg (not supported BIOS), appear when I run the update.

  The bar of buttons on the top of the screen does not (even after I uninstall the package of value of toshiba and re - install the last being) and the locking/unlocking back touch button does not work.

  I hope Toshiba can find me a solution, coz I don't have time to go to the DEPOT
  PSU9ME00D00XAR model U500-1F5

  Windows 7 (64)

  Thanks in advance

  Hello

  First one comment:
  * I am updating my laptop regularly whenever I get alert through TEMPRO or Toshiba service center. *
  That s is nice, but certainly not necessary. When the system is working, do not touch or change anything. Maybe stupid sounds now, but I recommend you to remove the TEMPRO system. Believe me you don't need. I have 2 years old Satellite A300 and original BIOS. It works perfectly and I don't want to take any chances and to change what anyone. Since last month, I have the Satellite U500-1EX and will do the same. TEMPRO is already removed, and I am happy with the factory settings.

  All that you have done is OK, but at least you can try to reinstall entire OS now using HDD recovery option (F8 at startup) to see if everything works well again. Sorry, but if this will not help, I think that you need the BIOS downgrade to the old version.

• Satellite M70 - media buttons do not work

  Hi all

  I have been using the Satellite M70 for 2 years now. My OS is XP SP2. The laptop comes with preinstalled express media player. And I still have the Express Media Player recovery CD.

  For the reasons that I just formatted the C drive. This is not the first time that I did. But the last time after reformatting drive C Media buttons are still working fine. This time beside the reformatting, I have updated BIOS (from site Web from Toshiba) to version 1.50.

  Now media buttons do not work. And not more than (browser and CD/DVD buttons) shortcut keys. I tried to reinstall the express media player by booting from the recovery CD and reinstall chose. But the problem persists.

  Are there ways to get the media buttons still work?

  Help would be very appreciated.

  P/S: in case it is because of the update of the BIOS, is there way I can flash back to its original version?

  Hello

  I have the Satellite M70-159 with BIOS V 1.3. I'll try to update BIOS to version 1.5 to see if the same happen on my M70 laptop. I did not Express Media Player, but I will test it with running Windows XP Home edition.

  So. Windows XP Home edition, I can use all the keys with Windows media player. Browser and all media buttons work well. With WinDVD too much work.

  I don't really know why this does not work on your M70. Maybe you should remove all the stuff your laptop and do a clean install EMC and operating system itself.

• Satellite x 200: Webcam does not work after I have connection on Microsoft messenger

  Hello everyone

  I have a Satellite x 200 SLI and for some reason any webcam does not work after I login on messenger... Even when I disable messenger and even disable internet... it still does not. Only when I restart the operating system.

  Anyone has an idea on how to solve this problem?
  Already did the updates but still, anyway.

  Hi Gabriel

  Check it out!
  I noticed several discussions on this issue, it would be really interesting to know if the SP1 fixes this annoying problem

  Your comments would be appreciated

• Qosmio F30: Toshiba control buttons do not work on Vista 64 bit

  Hello everyone

  I have Windows Vista 64-bit installed on my Qosmio F30, but before operation buttons do not work.
  I tried to use the 32-bit configuration of Vista drivers, but when I press it, I got the following error: "this function not taken in charge.

  So please can someone help me to overcome this problem.

  THX

  Hello

  You cannot use these Toshiba control buttons (play, pause, etc.) because the necessary drivers are not installed.

  You will need a compatible Vista value added package, but it seems that Toshiba page does not provide the 64-bit VAP but only the 32-bit version.
  The problem is that the software for Vista 32 bit does not work on Vista 64 bit OS.

  In my opinion so there's nothing to do right now

• Satellite A210 - FN buttons do not work with another OS

  Hello

  I reinstalled my Toshiba Satellite A210-1BX with another operating system Win
  My problem is, that the Fn - button does not work and is not pop down on the top of the screen.

  Should what program or driver I install this function? I have installed all the drivers on the Toshiba site :-/

  Thank you

  Hello!

  Why you n t post what OS it is? I mean that there are several Windows OS on the market

  So I can't help you right now but for Vista, you have the Toshiba value added Package. Visit the Web from Toshiba!

  Good bye