Need help to roll back that Lync Server 2013 changes

Similar Questions

• Installation of the elements 11 on Mac. Need help with installation error "Setup wants to make changes.

  Installation of items 11 Mac 10.8.2. Need help with Setup error: installation wants to make changes. Type your password to allow this. "After entering the Adobe password, nothing happens.  Locked for more than installation.  Any ideas?  Phone support Adobe couldn't help.

  Just prior to leaving changes (installation in this case) is done on the Mac OS application password & it must be the password for Mac system. This password is the native guest of the system clean & accept the password only. Please make sure that it's the right password (all/admin rights) and the game should work.

• Need help to choose between Streaming & Interactive Server

  Hi all

  We are the Windows Media to Flash Media Server server migration and so I need advice. Here are my requirements:

  1. Be able to deliver videos in playlists. For example: Insertion of ads before the main video
  2. Restrict access to certain videos will be available for only paid customers
  3. Be able to create applications where users can upload their own videos. I guess that this requires that the server of the company. However, this requirement is not critical.

  Another tip for the first time is more than welcome. Thank you for taking the time to read this post.

  Thank you

  Mushtaq

  You will need the interactive version of create playlists on the server side. Your other option is to get the streaming version and create a playlist in an XML file (for example), which supported the client-side custom player video (you need to have this done) and go from there.

  To create a playlist that automatically runs as TV and people just "connect" each time, you need to use good FMIS. I don't see why you need the Enterprise version, so you don't have to buy.

• Need help to get back running my computer after that I stop.

  After I stop and restart my computer I get this black screen with "floppy Q Seek failure, press F1 or the installer.  When I press F1 it bring back my splash screen, but this isn't a normal start procedure.  Help. What's wrong? I had an accident and brought my computer, with the exception of this.

  Hi Jotennis,

  ·        Do you have any floppy drive installed on the computer?

  ·        Do you not see any drive floppy in the computer window?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  You may receive this message if the floppy drive Q drive is enabled in the BIOS if the boot priority is set to boot from the floppy drive and the CMOS battery is dead or if the BIOS settings are set to default return. You can contact the computer manufacturer to help you disable the floppy drive in the BIOS and check the CMOS battery on the motherboard.

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  I hope this helps.

  Thank you and best regards,
   
  Srinivas R
  Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help to recover files that I backed up in Vista, now that I again installed W7

  I had Vista Ultimate. I bought W7 home pro upgrade. (ultimate has always been more than I needed)

  I backed up the external hard disk Vista computer (I think that I have backed up the entire computer, not just the files = WindowsImageBackup)
  then I tried to install the upgrade. (He said I owed a complete new installation, because I was leaving Ultimate pro)
  I allowed it.
  NOW, I can not access the backup I had Vista.
  I need to reinstall Vista from the backup, then JUST save FILES... then reinstall the new W-7?
  or can I just access the files I need?

  You may need to restore the full backup PC you created in Windows Vista, then make a Windows easy transfer to save your settings and personal files:

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Before you do, try attaching the backup of the computer as a virtual hard disk image and copy your personal files:

  First of all, connect the external hard drive where you have the. Disk file hard stored virtual or backup your installation of Windows 7, then turn it on. I use an external USB hard drive.

  

  Click Start, right-click computer and click on manage

  

  In computer management, expand storage , and then click disk management

  

  You should see your external hard drive listed. Click on the Action menu, and then click Attach VHD

  

  Clear the read-only check box, and then click Browse

  

  Browse the external hard drive, open the WindowsImageBackup folder where Backup and Restore stores the system image. Open the desired image you want to copy the files.

  

  Open the folder with the name of backup you should also see the date in the name of the backup

  

  Select the .vhd file bearing the name of digital alpha, and then click Open

  

  Click OK

  

  Windows 7 now detects the VHD file as a hard disk volume.

  

  Once the VHD file is initialized, it will assign a volume name, and you can browse it like any normal hard drive you have installed or connected to your computer. In the screenshot above, I'm full navigation of the hard drive of a computer Windows Vista Edition virtual file, you can see the folders normally found at the root of the drive as users, Windows, program files folders.

  

  When you are finished using the VHD file, simply click the eject button in the notification area and eject the virtual disk file external listed.

• I need help to get back on facebook! I asked to change my password more than a month and can't always answer their questions of code just so that I can join!

  HELP ME PLEASE!

  I tried to reset my password facebook more than a month and I can't get it fixed. I just want to be able to get back on my account and enjoy. I don't mind giving my phone number to someone who will address this problem seriously. Let me know as soon as possible!

  
  

  Hello

  Please contact the Facebook Support.

  Facebook Help Center
  http://www.Facebook.com/help/

  How can I contact Facebook support?
  First, select the subject of your question of "list of topics".
  Then select the appropriate contact form or answer your question in this section.
  http://www.Facebook.com/help/?page=835

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• help by chance that I got rid of all the admins and need help to get back them

  I played a joke on my father, but he pulled back please help

  Hello

  Yes, you can do this by reinstalling the operating system. To do this, you can refer to the article mentioned below. If the key media and product installation then refer you to the steps provided for in the article mentioned below.

  Installing and reinstalling Windows

  If you do not have the installation media, and then see the article mentioned below to create installation media.

  Download Windows 7 Disk Images (ISO files)

  Please let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

  Kind regards

• Need help with permissions of folder in Server 2008 r2

  I have a windows domain and use roaming profiles for our students.

  Student profiles server is a 2008 r2 box.  I have a folder created on the root of drive called profiles, and the permissions are set as follows:
  inheritance is turned off
  Tech - total control (no matter who in the Technology Department)
  teachers - full control (all teachers have access to all the files of the student)
  control system - total
  domain user - of special permissions (this was defined by windows not me)
  inside this folder, I have 2 folders.  one called data and one called roam.  Each of these files has turned on inheritance and the show the same permissions as the folder parent.  Inside the data folder is where each student has a folder (named by ID) with their my documents folder, desktop etc folder.  the roaming folder also contains student folders (named by id) that contains the appDat file and the ntuser.dat etc files (everything is copied to the local computer when connecting)
  Folders that are created inside these files are supposed to get all the permissions of the parent folder but also give the student change your permission on the folder and its contents.
  I recently renamed the homelessness file and created a new folder of homelessness as described above.  student records begin to be created inside however, some of them have the correct permission settings, some list only the student and administrator (inheritance is disabled) and some are created where I have no access to the folder at all until I have take ownership of the file, after which the administrator is the only user with permissions for the folder and the contents.
  I have 6000 student accounts.  Is it possible to write a vb script that would change the permissions on these folders at once instead of changing each one individually.
  What I need, is to ask the administrator appropriating all the files and folders, and then change the properties of legacy on all files and folders, add the student to their folder with change permission, and change the owner of every folder and contents back to the ID of the folder name.
  Any help would be GREATLY appreciated!  In the end, I'd be delighted if records were created just correctly and does not need to do anything.  It worked very well under windows XP, but since we moved to windows 7, it has been a nightmare!  I got a box to open with Microsoft and that they could not obtain records to create with the correct permissions and the case was closed after 2 weeks or try different things.  The idea of scenario is mine, but I don't know where to start to create.

  I have a windows domain and use roaming profiles for our students.

  Student profiles server is a 2008 r2 box.  I have a folder created on the root of drive called profiles, and the permissions are set as follows:
  inheritance is turned off
  Tech - total control (no matter who in the Technology Department)
  teachers - full control (all teachers have access to all the files of the student)
  control system - total
  domain user - of special permissions (this was defined by windows not me)
  inside this folder, I have 2 folders.  one called data and one called roam.  Each of these files has turned on inheritance and the show the same permissions as the folder parent.  Inside the data folder is where each student has a folder (named by ID) with their my documents folder, desktop etc folder.  the roaming folder also contains student folders (named by id) that contains the appDat file and the ntuser.dat etc files (everything is copied to the local computer when connecting)
  Folders that are created inside these files are supposed to get all the permissions of the parent folder but also give the student change your permission on the folder and its contents.
  I recently renamed the homelessness file and created a new folder of homelessness as described above.  student records begin to be created inside however, some of them have the correct permission settings, some list only the student and administrator (inheritance is disabled) and some are created where I have no access to the folder at all until I have take ownership of the file, after which the administrator is the only user with permissions for the folder and the contents.
  I have 6000 student accounts.  Is it possible to write a vb script that would change the permissions on these folders at once instead of changing each one individually.
  What I need, is to ask the administrator appropriating all the files and folders, and then change the properties of legacy on all files and folders, add the student to their folder with change permission, and change the owner of every folder and contents back to the ID of the folder name.
  Any help would be GREATLY appreciated!  In the end, I'd be delighted if records were created just correctly and does not need to do anything.  It worked very well under windows XP, but since we moved to windows 7, it has been a nightmare!  I got a box to open with Microsoft and that they could not obtain records to create with the correct permissions and the case was closed after 2 weeks or try different things.  The idea of scenario is mine, but I don't know where to start to create.

  Wrong forum.  TechNet.
   
  And Yes - many ways to do what you want.  VBScript would work.  PowerShell.  Probably still a command script could do.

• Need help with attention not approved VPN server certificates.

  I've been on the many other posts about it, and they all seem a bit different, so I started my own thread.

  I was sent to my users via the ASA AnyConnect 3.1.02026, and we all get the warning of the Cert of untrusted when connecting VPN server.

  When the ASA deploys the client, it puts the external IP of the SAA as the host name, which causes the error.

  So I have two questions: 1. How can I get the ASA to make host name "vpn.cfo.com" when a user installs the client and 2. How can I change my cert so that it does not show the internal name of the ASA and use 'vpn.cfo.com' instead?

  Here are all the news that everyone should not (I) help to think

  SSL-trust ASDM_TrustPoint0 OUTSIDE_PRIMARY point

  Certificate

  Status: available

  Of the certificate number:

  Use of certificates: Signature

  Public key type: RSA (1024 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Name of the object:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Validity date:

  start date: 15:17:42 EDT June 2, 2011

  end date: 15:17:42 EDT May 30, 2021

  Trustpoints Associates: ASDM_TrustPoint0

  CA

  Status: available

  Of the certificate number:

  Certificate use: general use

  Public Key Type: RSA (2048 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  CN = VeriSign Class 3 Public Primary Certification Authority - G5

  or = (c) 2006 VeriSign\, Inc. - authorized only use

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  Name of the object:

  CN = VeriSign Class 3 Secure Server CA - G3

  OU = terms of use at https://www.verisign.com/rpa (c) 10

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  OCSP AIA:

  URL: http://ocsp.verisign.com

  CRL Distribution points:

  [1] http://crl.verisign.com/pca3-g5.crl

  Validity date:

  start date: 19:00:00 EST February 7, 2010

  end date: 18:59:59 EST February 7, 2020

  Trustpoints Associates: _SmartCallHome_ServerCA

  Any help would be greatly appreciated.

  Hello

  Cisco has made a strict checking of KU and EKU in recent versions of AnyConnect, which leads to the warning you got.

  To my knowledge, if you go to 3.1.00495, you will not get this warning, if not, you need to get the valid KU and EKU fields in your certificate of ASA.

  To use specific trustpoint, please check the 'truspoint ssl' command in global configuration mode.

  Mashal

• Need help with laptop back to factory settings

  can someone help me on how to put my laptop back to factory settings

  Hello

  It would help if you told us your laptop brand and operating system.

  This is general information on how to do it:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall using the recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the hard drive Partition reinstall back to how you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• can not update; "" Windows or windows defender ' more and I lost my; "' help and support ' file system on startup. Need help to get all that, please.

  I can't update "windows" or "windows defender". Followed the steps described by Microsoft help, tried to download manually, have asked Microsoft to help (no response yet) these first two things didn't work. I even had something like; change setting.that message security came for "Windows update", I have change the security setting, did not just well, still nothing.
  Windows Defender gives me an error code that looks like this;
  Error Code 0 x 80070005
  That's all I can get, and it will not update.
  and on top of it, I've lost my "Microsoft Help and support (it) when I click Start and click Help and support, I get a (?) all help options or when I click on it nothing there is totally 'empty '.
  I have one more problem.
  I tried to defrag my computer, and I can't do it either. I get a grey screen and if I click on anylise or defragment, it does nothing, no error message or anything else. Tried to manually defragment Traore does not work, tried to load a defrag on the web program, wouldn't let me load it.
  Nobody knows what happens here? why I'm having these problems all of a sudden? I do nothing but send E-mails and read my emails and I do not browse the internet or enter sites that are safer. So, what can I do? How to make everything return to normal? can someone help me with this?
  Also let me tell you right now, I'm not an expert on how to do things on the computer, so I'm scitish when it receives or sounds complicated. I don't want to lose my entire system because of these unfortenate none of the work programmes.

  Hello shessy49, welcome.

  I would recommend that we run a SFC (System File Checker) first scan to see what he finds. Try this:

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  ---
  After the reboot
  ---

  1. click on START
  2. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  3. type "sfc/scannow" (without the quotes) and press enter

  If the question started very recently, you can try a system restore:

  1. click on START
  2. click on "all programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on "system restore."

  6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.

  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with high back and create more space on the computer's internal drive.

  I don't have a lot of space on my internal hard drive.  I just got a backup unit portable 500 GB.  After that I backup everything, what should I do next to create more space on the original disk of disk space?

  Hello

  Here are some steps to free up the memory of hard drive on your computer.

  Method 1: how to optimize disk space everything back to the top
  http://Windows.Microsoft.com/en-us/Windows7/what-backup-settings-should-I-use-to-maximize-my-disk-space

  Method 2: perform cleaning disc.

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information helps.
  Please respond back with the State of the issue and let us know if you have any questions.

• Need help bridge database for MS SQL Server, error ORA-28546 configuration problems

  Dear all,

  I'm trying to configure Oracle to MS SQL Server(I don't have admin access to the MS SQL Server) database gateway.  When I try to test the dblink connection, I get the following error.

  I published select * from dual@xyz;

  ORA-28546: initialization of the connection failed, probable Net8 admin error

  ORA-28511: interruption of the RPC connection to heterogeneous remote agent using SID = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)))

  ORA-02063: preceding 2 lines of xyz

  28546 0000 - ' failed to initialize connection, unlikely Net8 admin error.

  My setup is as follows.

  1 oracle 11 GR 2 under Oracle Linux 6, the same gateway version is installed on the same server but different base directory.

  2 oracle DB base directory is u01/app/oracle/product/11.2.0/dbhome_1, gateway home directory is/u01/gateway.

  3. I use the same file listener.ora for db and the entry door.

  4. the content of my listener.ora, tnsnames.ora and the initdg4msql.ora is below.

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  #(ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1522))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  )

  )

  MSSQL =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  )

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  LISTENER_ORCL =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1522))(HOST = db.abc.com.tw))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = orcl.abc.com.tw)

  )

  )

  dg4msql =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521))

  (CONNECT_DATA = (SID = dg4msql))

  (HS = OK)

  )

  /U01/gateway/dg4msql/Admin/initdg4msql.ora

  HS_FDS_CONNECT_INFO=[192.168.0.1]:1433//XIETEST

  # replacement connect format is the name of host/serverinstance/databasename

  HS_FDS_TRACE_LEVEL = 255

  HS_FDS_RECOVERY_ACCOUNT = RECOVERY

  HS_FDS_RECOVERY_PWD = RECOVERY

  the dblink is created with the following statement.

  CREATE DATABASE LINK "xyz.abc.COM.TW".

  CONNECT TO ITS IDENTIFIED BY

  With the HELP of "dg4msql";

  Couple of other things I did to check the above works.

  [oracle@db admin] $ ping 192.168.0.1

  PING 192.168.0.1 (192.168.0.1) 56 (84) bytes of data.

  64 bytes from 192.168.0.1: icmp_seq = 1 ttl = 61 time = 7.61 ms

  64 bytes from 192.168.0.1: icmp_seq = 2 ttl = 61 time = 7,41 ms

  ^ C

  -ping 192.168.0.1 - statistics

  2 packets transmitted, 2 received, 0% packet loss, time 1818ms

  RTT min/avg/max/leg = 7.417/7.516/7.615/0.099 ms

  [oracle@db admin] $ tnsping dg4msql

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:53:11

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  /U01/app/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = localhost)(PORT = 1521)) (CONNECT_DATA = (SID = dg4msql)) (HS = OK))

  OK (0 msec)

  [oracle@db admin] $ lsnrctl status mssql

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 2013-SEPT-11 10:54:23

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias mssql

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  11-SEP-2013 start date 10:09:46

  Uptime 0 days 0 h 44 min 37 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/DB/MSSQL/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=127.0.0.1) (PORT = 1521)))

  Summary of services...

  Service 'dg4msql' has 1 instance (s).

  Instance of 'dg4msql', status UNKNOWN, has 1 operation for this service...

  The command completed successfully

  Obviously, I'd like to get this configuration to work, but I have also a couple other questions about this configuration.

  1. for the installation of the bridge, he wants to run the root.sh script.  the script root.sh as to what follows.

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  The 'dbhome' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'oraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  The 'coraenv' file already exists in the usr.  Overwrite it? (y/n)

  [n]: n

  the above answer is correct?

  Thanks for reading.

  The strace shows:

  2796 open ("/ u01/app/oracle/diag/tnslsnr/db/mssql/trace/mssql.log", O_WRONLY |) O_CREAT | O_APPEND, 0660) = 12

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/admin/initdg4msql.ora", F_OK)

  2796 write (12, "2013-SEPT-11 15:02:44 * (CONNECT_"..., 175 ")")

  9564 <... access="" resumed="">) =-1 ENOENT (no such file or directory)

  2796 <... write="" resumed="">) = 175

  2796 close (12

  9564 brk (0x14a3000) = 0x14a3000

  2796 <... close="" resumed="">) = 0

  2796 poll ([{fd = 8, events = POLLIN |}]) POLLRDNORM}, {fd = 11, events = POLLIN |} [POLLRDNORM}, {fd-=-1}, {fd = - 1}]-1, 4

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 access ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", F_OK) =-1 ENOENT (no such file or directory)

  9564 statfs ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/", 0x7fff91f005b8) =-1 ENOENT (no such file or directory)

  9564 open ("/ u01/app/oracle/product/11.2.0/dbhome_1/dg4msql/log/dg4msql_agt_9564.trc", O_WRONLY |) O_CREAT | O_TRUNC, 0666) =-1 ENOENT (no such file or directory)

  => so that it always uses the database as Oracle_home House

  With this info, I rechecked the listener and saw that you are missing the ORACLE_HOME setting in the dg4msql section of SID. Please correct your entry to mssql_sid to:

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = db.abc.com.tw)

  (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = orcl)

  )

  )

  SID_LIST_mssql =

  (SID_LIST =

  (SID_DESC =

  (ORACLE_HOME = / u01/bridge)

  (SID_NAME = dg4msql)

  (ENVS = LD_LIBRARY_PATH = / u01/gateway/dg4msql/pilot/lib: / u01/gateway/lib)

  (Program name = / u01/gateway/bin/dg4msql)

  )

  )

  Then please stop and restart the mssql listener and check again.

  -Klaus

• I need help on this issue, that I am having with my homework

  This is the problem "as you did previously, place your cursor in the any of the elements of the list in Design view." Then go down to the tag selectorand this time click the tag < a >' my problem is that I'm not able to find the < a > tag no matter where I asked my Professor, but he never answered back, what should I do? someone help me please.

  I have a small idea that you forgot to apply the elements of anchoring. Judging by what you said, you're probably talking about the menu items. The structure looks like normally

  • <>House of href = "index.html">
  • <>href = "Profile.html">profile
  • <>href = "messages.html">Messages

  Revisit your work to see where you forgot the stage in question.

  If my assumptions are wrong, please your postal code.

• (! "I need help!) Graphics card that is right for my needs? (I need help!)

  I am planing to upgrade my graphics card Intel HD 4600 to a good graphics card for Adobe Premiere, Adobe After Effects and some games like GTA V. currently, these PC specifications: Intel Core i7 processor 4790 3.6 GHz, 16 GB of Ram (1600 MHz), 2 x 1 TB WD red HDD (I am planing to get later a 512 GB SSD)

  My needs:

  A good graphics card with which I was able to get a video edithing '4K' Workflow at 60 Hz

  He should ' t cost more than 400 $

  It must be great for Adobe After Effects and Adobe Premiere.

  It must be also very high for some games like GTA V Ultra mid-week.

  Please help me graphics card wich I should get, if you have an idea, that would be great for me, so please help me.

  For 4 k you will need a video card with at least 4 GB of ram.  In your price range, take a look at the video card GTX 770.  It should work as well with your games.

  David