need help to solve a problem of file path

Similar Questions

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to solve the problem with worm:win:32 / cridex.e

  Please help me to solve this problem worm:win:32 / cridex.e

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Dead sounds - need help to solve the problem

  Its just died suddenly.  Troubleshooters tell me disabled audio - can't find that

  Audio device manager - disabled and does not by default - which is not found

  Need services of generator of the window and the window Audio end - totally lost

  I did not hit anything either or to change anything whatsoever.  All tests show its OK and speakers OK - sound is not muted

  I think that everything the only thing that could be linked has been tested.  I think that MS convenience store gave me the advice above.  However, when I look for those

  elements, quite simply, I do not see them, and I don't know where else to go to get them.

  Can someone help me, please?

  Convenience store must give you the option to fix, have you taken steps to solve the problem in the troubleshooter?

  That you have installed new software before the problem happens?

  Try to run a full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I can't drag items in the library, need help to solve this problem.

  I just downloaded adobe muse cc free trial two days ago. I tried following the tutorial, making site coffee Katie and soon discovered that I can't drag items to the library. I tried to remove and again and again its importation and the results are the same. I just want to know how to solve this problem.

  Please try to follow the suggestions mentioned here:

  https://forums.Adobe.com/thread/1514912

  Thank you

  Sanjit

• Need help to solve the problem in valueset...

  Hi all
  
  I need help in the creation of the set value.
  My requirement:
  I need 2 1. date settings 2. how far
  When I chose the first parameter (to date) ex: 01-01-2010.
  If I chose the 2nd parameter in this one, I need to display equal or superior to that date (i.e., based on the first parameter). that is, grater than or equal 1 January 2010 "this date. Not displaying does not forward then this date.
  With the help of $flex$, we can do this am getting the error.
  You can help me pls to it.
  
  Thanks in advance.
  
  
  Kind regards
  Leelakrishna.G

  Hello

  If you use the value defined in the program settings simultaneously, the only thing to do is go to the simultaneous program settings screen, go to the parameter "Date from" and mark the field Range as low. Then go to the parameter "To Date" and mark the highest field. In this way, the system will not allow the user to enter a "Date to the ' who is older than the 'Date '. It will be useful.

  Kind regards.

• I need help!  Solving a problem of path of file in Dreamweaver 8

  Hi everyone I am reposting this message because I am really stuck at this point. I can't finish my site until I have correct this problem.
  
  I use Dreamweaver 8 and for some reason, my name url/path visually changed in my new web page. Anything that requires a path (image, a link, etc.) now has a prefix in that particular page.
  
  The old files e.g.: Images/flower.gif
  
  for example < img src = "Images/Top panel/whats new.jpg" name = "what's new" width = "97" height = "49" border = "0" >
  
  
  Now changed to:... /... / Images/flower.gif.
  
  "for example < img src ="... /... ' / Images/Top panel/whats new.jpg "name ="what's new"width ="97"height ="49"border ="0">
  
  
  The new extension is everywhere a path is read or written. For example, it is in the code, and it's in the url path when I'm looking at a source of the image. It is really annoying because when I try to copy my new web page fields to put in older files, he understands that... /.. / prefix that does not exist in the old files. Even when I create a new page, the prefix is present.
  
  
  My root folder is stored in my drive c with everything else. My url is relative to the document and not the root of the site. This is the setting that I always use. It's the same on all pages, even the new page with the additional prefix.
  
  How can I get that back on the original path setting?
  
  Thank you!!!
  

  > Former files E.g.: Images/flower.gif
  >
  > for example
  > height = "49" border = "0" >
  >
  >
  > Now changed to:... /... / Images/flower.gif.
  >
  > for example
  > width = "97" height = "49" border = "0" >

  two questions:

  One - is the correct path, or is it broken when you perform a check of link?

  two is two folders of paper levels down to the root level?

  make three or four:
  Please follow these steps:
  1 - Go in edit that site definition.
  Click the box for the folder of local site, copy and paste this file
  in the response path

  2 - Open a new blank document in dw.
  --> do not save it<>
  Please insert this picture-Images/flower.gif

  Please copy and paste that
  absolute path to the file on your hard drive.

• Need help to solve the problem on my Satellite U500 PSU9ME

  Dear Toshiba

  I've always used laptops for years working time or personal laptops; I decided to change Toshiba because I hear a lot how they are and high quality!

  Since I bought my laptop and I'm having all sorts of problems with it!

  1. 1st day I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  2. I've updated of bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  3 today, I had a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  I'll take it tomorrow at the service, but the laptop was purchased on March 24, 2010 only! And it has been registered online on March 26, 2010;

  The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of this.

  I have didn't even use it again as heavy I used to other brands which has never had a single issue!

  This does not mean your laptops are bad, but IE please help and provide solutions or maybe this model needs an urgent review!

  Thank you!

  Model: SATELLITE U500

  > 1. 1st day, I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  Seems, that it was a software issue since I noticed a similar problem after receiving some updates from Microsoft is the updated graphics driver

  > 2. I have updated to bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  Wonder why you n t read the FAQ/HowTo section in this forum.
  Here you can find the BIOS update HowTo!
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  > 3. Today, I got a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  Seems the cooling starts module malfunction the ASP technician should help you

  > The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of it all.

  You're right, this is not normal cell behavior but it must be said that it s a machine and the machine could begin to malfunction it s nothing unusual and in your case, it was simply bad luck that happened after a short time of use

  I had a Toshiba laptop for 6 years and guest what? It s work great since the day of purchase trees

  Good day...

• I NEED HELP TO SOLVE MY PROBLEM OF SANDY BRIDGE CHIPSET!

  Hello

  I need someone to receive the update for my Pavilion Dv7 help 4290us part!.

  It is one of the machines involved in the problem of Sandy Bridge, I checked several times...

  I'm already registered the laptop

  Thanks in advance

  Manuel Ramirez

  The number of product of your laptop is XZ037UA #ABA (here ABA means this model has been sold in the United States only). Where was this laptop bought exactly and where are you located now?

  HP offers a comprehensive guarantee and ideally, this should be covered free of charge. You can find more info on link below

  http://support.HP.com/us-en/document/bpr01266

• I need help to solve a problem I'm having with an installatiion of set-up/repair Windows XP Home Edition service pack 3

  I have 2 computers running Windows Xp Home Edition Version 2002 Service Pack 3.  I tried to run a set-up/repair on one of them.  He loaded the files and went back to the stage of the installation.  He said at this point, it takes the file 'ASMS' of the S3CD.
  I copied the ASMS from the other computer files on my USB but the computer being the establishment does not recognize them.  The program disks that I bought with the computers at the same time say XP Home Editiion 2002 version, but nothing about service pack 3.

  What I need to know is if sp3 is the same for the home edition as it is for regular XP and is different ASMS files in the installation of the sp3 that they are in the House editiion.  If I buy the sp3 disc or download these files I will be able to complete the installation of the set-up/repair on my computer or is there perhaps something wrong with the device causing it to do what he did.

  I am also curios - running installation of set-up/repair on this subject, I lost all my files or will they preserved when I've completed the process?  If I lost my files I before moving on to Windows 7 or any other OS that supports available further in the future?

  Any help/information will be greatly appreciated.  Thank you.

  Hi RandyMeier,
   
  Service Pack 3 files will be different than the normal installation files.
   
  It would be useful to an original CD of Service Pack 3 for installation.
   
  There is an article that you can follow before that and check if it helps.
   
  "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
   
  If you are using a clean installation process all files may be lost.
   
  In this scenario, you should consider the upgrade of the operating system Windows 7.
  http://microsoftstore.com/Win7
   

  Kind regards

  Divya R - Microsoft technical support.

• Need help with solving a problem of component inking!

  I have not had any problems with the following programs (new laptop), at first with Windows Journal, sticky notes, handwriting recognition and the cutting tool. After six months, these programs do not work. Windows Journal: failed to start, error during initialization of the inking, sticky components: doesn't work do not restart 80004005, handwriting recognition: ink does not work on your computer now, snipping tool: ERROR now right does not not on your computer. I don't know if these problems are associated with Notea, trial version has expired. or somethig to do with Microsoft Office, I got office 2007 school (brought, because of specific classes taken) or else I did! I tried several thing in the help section and nothing works!

  It would really help if you could point me in the right direction!

  Thanks for your help!

  Ricky Miller

  Close this forum, see link below:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/f14d48b1-8753-4966-AE66-dcc248c24eb5

• When I have my window starup (error loading dll) I need help to solve this problem

  HPDV6871US LAPTOP

  I uninstall a program from the control panel but some how when the starup high tower it allway come with dll (error loading)

  Help, please

  Uninstall the Kodak software system and if you need then this step to install it again.

• Need help to solve the problem!

  Hello

  I have Samsung SyncMaster P2250 Mointor, when any video works on my monitor, it is automatically going to turn off of the screen. then I never return to the screen but, always my Cpu is running. I left only one option that restart the computer.

  can someone help me what do I do? I also update the Nvidia software!

  Thank you

  Hello

  Have you tried another monitor? How can I connect the monitor to your machine? What is your machine and what operating system?

  Kind regards

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner