Need help with solving a problem of component inking!

Similar Questions

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to solve the problem with worm:win:32 / cridex.e

  Please help me to solve this problem worm:win:32 / cridex.e

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Dead sounds - need help to solve the problem

  Its just died suddenly.  Troubleshooters tell me disabled audio - can't find that

  Audio device manager - disabled and does not by default - which is not found

  Need services of generator of the window and the window Audio end - totally lost

  I did not hit anything either or to change anything whatsoever.  All tests show its OK and speakers OK - sound is not muted

  I think that everything the only thing that could be linked has been tested.  I think that MS convenience store gave me the advice above.  However, when I look for those

  elements, quite simply, I do not see them, and I don't know where else to go to get them.

  Can someone help me, please?

  Convenience store must give you the option to fix, have you taken steps to solve the problem in the troubleshooter?

  That you have installed new software before the problem happens?

  Try to run a full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Need help with the printer problem.

  * - Original title - help

  Why can I send pictures via bluetooth for continuous printer asking me a code years samsung knows anything about can any 1 hepl

  Hi Patrick,

  1. What is the brand and model of the printer?

  2. What is the exact message that you get when trying to print?

  3. don't you make changes to the computer and the printer prior to this problem?

  We can refer to this article and check if that helps.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-in/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• Need help with the huge problem of first Pro Photo. Confused beyond belief.

  Ladies and gentlemen, I've been at this for two days and am desperately needing help. At the moment my editing in Premiere Pro is completely blocked because of a bizzare picture problem. I am 100% glued and impossible to change.

  When I add a picture of my bin, it's ok. Then I add a second and it seems fine. But all the photos I add after this show as the first image. Never forget that the name of the file appears correct.

  The image itself, as well the thumbnail and the image in the timeline, etc. are just the first image.

  I restarted, rebooted, started new projects with new settings, cleared the cache first Pro... Nothing works.

  Video is not a problem. Only images. And now I'm dead in the water as a result.

  Look at this screenshot. See how the other as the second picture they are all the same? Well, they shouldn't be. But they are. And I'm stuck and cannot change at all as well.

  WTH is going on here?

  I have Premiere Pro 5 on a PC from Adobe Production Premium.

  Is a question I've had recently in the middle of editing that Premiere Pro will start in line video that has already been fulfilled previously.

  Begging for help here.

  

  Since you have never had this problem with image files

  in before cs5, I'd be inclined to turn to the source

  images that caused this problem to emerge

  If I remember correctly this problem, it has to do with the

  "image" header written to image files,

  and it also seems that the problem was unique to the .jpg images

  first merges by header information and duplicate images

  Open in ps and resave images re-written the header information

  for a State that is correctly read by first

  HAHAHAHAHAHAHAHAHAHAHA!

• Need help with work flow problem: a single e-mail notification non-stop.

  Hello
  
  We have created an approval Workflow custom PO based on the standard PO approval workflow and we had it for awhile now. Last week, we had a problem where the notification keeps on sending e-mail to suppliers and buyers. We discovered that the notification_id given in table WF_NOTIFICATIONS keeps having updated by the minute affecting the MAIL_STATUS Invalid then SENT back, then back to INVALID again and so on. We think that what is updated in this table is the cause, but so far we have not found what is updated. Here are a few of our instance.
  
  Oracle Applications: 11.5.10.2
  Database: 10.2.0.4 64bits
  OPERATING SYSTEM: AIX
  Custom workflow based on the 115.127.11510.16 review
  
  Customizations:
  -Created in custom notification that xx_email_po_pdf_supp based on EMAIL_PO_PDF_SUPP.
  -Creation of custom message XX_EMAIL_PO_PDF based on EMAIL_PO_PDF.
  -Added #WFM_CC to XX_EMAIL_PO_PDF.
  -Creating custom attribute XX_PO_WF_EMAIL_PERFORMER and set as an interpreter to the XX_EMAIL_PO_PDF_SUPP notification.
  -Created the custom XX_ADDTL_STARTUP_VAL function right after "Set Workflow start values of service." This function sets the #WFM_CC attribute and the XX_PO_WF_EMAIL_PERFORMER attribute.
  
  Not sure if the customizations have nothing to do with the question since not all POs have this problem. Anyone have this experience? Appreciate help with this.
  
  Thank you
  Allen

  Just to review this thread, can help you
  Workflow Notification Mailer is Spamming accounts of e-mail users [1293792.1 ID]
  Thank you

• Need help to solve the problem in valueset...

  Hi all
  
  I need help in the creation of the set value.
  My requirement:
  I need 2 1. date settings 2. how far
  When I chose the first parameter (to date) ex: 01-01-2010.
  If I chose the 2nd parameter in this one, I need to display equal or superior to that date (i.e., based on the first parameter). that is, grater than or equal 1 January 2010 "this date. Not displaying does not forward then this date.
  With the help of $flex$, we can do this am getting the error.
  You can help me pls to it.
  
  Thanks in advance.
  
  
  Kind regards
  Leelakrishna.G

  Hello

  If you use the value defined in the program settings simultaneously, the only thing to do is go to the simultaneous program settings screen, go to the parameter "Date from" and mark the field Range as low. Then go to the parameter "To Date" and mark the highest field. In this way, the system will not allow the user to enter a "Date to the ' who is older than the 'Date '. It will be useful.

  Kind regards.

• I can't drag items in the library, need help to solve this problem.

  I just downloaded adobe muse cc free trial two days ago. I tried following the tutorial, making site coffee Katie and soon discovered that I can't drag items to the library. I tried to remove and again and again its importation and the results are the same. I just want to know how to solve this problem.

  Please try to follow the suggestions mentioned here:

  https://forums.Adobe.com/thread/1514912

  Thank you

  Sanjit

• I need help to solve a problem I'm having with an installatiion of set-up/repair Windows XP Home Edition service pack 3

  I have 2 computers running Windows Xp Home Edition Version 2002 Service Pack 3.  I tried to run a set-up/repair on one of them.  He loaded the files and went back to the stage of the installation.  He said at this point, it takes the file 'ASMS' of the S3CD.
  I copied the ASMS from the other computer files on my USB but the computer being the establishment does not recognize them.  The program disks that I bought with the computers at the same time say XP Home Editiion 2002 version, but nothing about service pack 3.

  What I need to know is if sp3 is the same for the home edition as it is for regular XP and is different ASMS files in the installation of the sp3 that they are in the House editiion.  If I buy the sp3 disc or download these files I will be able to complete the installation of the set-up/repair on my computer or is there perhaps something wrong with the device causing it to do what he did.

  I am also curios - running installation of set-up/repair on this subject, I lost all my files or will they preserved when I've completed the process?  If I lost my files I before moving on to Windows 7 or any other OS that supports available further in the future?

  Any help/information will be greatly appreciated.  Thank you.

  Hi RandyMeier,
   
  Service Pack 3 files will be different than the normal installation files.
   
  It would be useful to an original CD of Service Pack 3 for installation.
   
  There is an article that you can follow before that and check if it helps.
   
  "The file 'Asms' on the CD-ROM Windows XP Professional is needed" error message when you install Windows XP
   
  If you are using a clean installation process all files may be lost.
   
  In this scenario, you should consider the upgrade of the operating system Windows 7.
  http://microsoftstore.com/Win7
   

  Kind regards

  Divya R - Microsoft technical support.

• Need help to solve the problem on my Satellite U500 PSU9ME

  Dear Toshiba

  I've always used laptops for years working time or personal laptops; I decided to change Toshiba because I hear a lot how they are and high quality!

  Since I bought my laptop and I'm having all sorts of problems with it!

  1. 1st day I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  2. I've updated of bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  3 today, I had a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  I'll take it tomorrow at the service, but the laptop was purchased on March 24, 2010 only! And it has been registered online on March 26, 2010;

  The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of this.

  I have didn't even use it again as heavy I used to other brands which has never had a single issue!

  This does not mean your laptops are bad, but IE please help and provide solutions or maybe this model needs an urgent review!

  Thank you!

  Model: SATELLITE U500

  > 1. 1st day, I bought the laptop, the screen started black out on me and come back several times, I went to the dealer who has replaced for me right now, but the replacement does the same thing for a while even with the bios and drivers updated and then after a few days it worked fine.

  Seems, that it was a software issue since I noticed a similar problem after receiving some updates from Microsoft is the updated graphics driver

  > 2. I have updated to bios easily to v1.6 and now 1.7 released and I tried hard updated but the update won t work at all, it keeps stuck to the CMD screen.

  Wonder why you n t read the FAQ/HowTo section in this forum.
  Here you can find the BIOS update HowTo!
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  > 3. Today, I got a massage from warning saying that the problem with the cooling system has been detected and I need to return it to the service!

  Seems the cooling starts module malfunction the ASP technician should help you

  > The service will open and check it out or fix it but it is neither normal nor acceptable when a laptop cost me almost 1200USD and worked less than 2 months and the experience of it all.

  You're right, this is not normal cell behavior but it must be said that it s a machine and the machine could begin to malfunction it s nothing unusual and in your case, it was simply bad luck that happened after a short time of use

  I had a Toshiba laptop for 6 years and guest what? It s work great since the day of purchase trees

  Good day...

• I NEED HELP TO SOLVE MY PROBLEM OF SANDY BRIDGE CHIPSET!

  Hello

  I need someone to receive the update for my Pavilion Dv7 help 4290us part!.

  It is one of the machines involved in the problem of Sandy Bridge, I checked several times...

  I'm already registered the laptop

  Thanks in advance

  Manuel Ramirez

  The number of product of your laptop is XZ037UA #ABA (here ABA means this model has been sold in the United States only). Where was this laptop bought exactly and where are you located now?

  HP offers a comprehensive guarantee and ideally, this should be covered free of charge. You can find more info on link below

  http://support.HP.com/us-en/document/bpr01266

• When I have my window starup (error loading dll) I need help to solve this problem

  HPDV6871US LAPTOP

  I uninstall a program from the control panel but some how when the starup high tower it allway come with dll (error loading)

  Help, please

  Uninstall the Kodak software system and if you need then this step to install it again.

• I need help with a technical problem

  I'm using Elements 8. The problem is that I can click on the clone brush, but the computer? don't clone anything. I get a message that there is an error. Problem is, the box with the message doesn't tell me what error or how to remedy the situation. Any help please.

  I just found out what I was doing wrong. When I should have used the Alt button, I used the keyboard control button. The Clone tool works now.

• I need help!  Solving a problem of path of file in Dreamweaver 8

  Hi everyone I am reposting this message because I am really stuck at this point. I can't finish my site until I have correct this problem.
  
  I use Dreamweaver 8 and for some reason, my name url/path visually changed in my new web page. Anything that requires a path (image, a link, etc.) now has a prefix in that particular page.
  
  The old files e.g.: Images/flower.gif
  
  for example < img src = "Images/Top panel/whats new.jpg" name = "what's new" width = "97" height = "49" border = "0" >
  
  
  Now changed to:... /... / Images/flower.gif.
  
  "for example < img src ="... /... ' / Images/Top panel/whats new.jpg "name ="what's new"width ="97"height ="49"border ="0">
  
  
  The new extension is everywhere a path is read or written. For example, it is in the code, and it's in the url path when I'm looking at a source of the image. It is really annoying because when I try to copy my new web page fields to put in older files, he understands that... /.. / prefix that does not exist in the old files. Even when I create a new page, the prefix is present.
  
  
  My root folder is stored in my drive c with everything else. My url is relative to the document and not the root of the site. This is the setting that I always use. It's the same on all pages, even the new page with the additional prefix.
  
  How can I get that back on the original path setting?
  
  Thank you!!!
  

  > Former files E.g.: Images/flower.gif
  >
  > for example
  > height = "49" border = "0" >
  >
  >
  > Now changed to:... /... / Images/flower.gif.
  >
  > for example
  > width = "97" height = "49" border = "0" >

  two questions:

  One - is the correct path, or is it broken when you perform a check of link?

  two is two folders of paper levels down to the root level?

  make three or four:
  Please follow these steps:
  1 - Go in edit that site definition.
  Click the box for the folder of local site, copy and paste this file
  in the response path

  2 - Open a new blank document in dw.
  --> do not save it<>
  Please insert this picture-Images/flower.gif

  Please copy and paste that
  absolute path to the file on your hard drive.