Need help with Acrobat 11.0.9: weird interface and fails on some computers

Similar Questions

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• need help with my screen has been using mouse and the screen is smaller and smaller

  need help with my screen has been using the mouse and the screen is smaller and smaller, so can't see

  Try to hold the 'ctrl' key and turn the wheel of scrolling the mouse forward to zoom, turning the scroll wheel to the rear is to zoom out.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• need help with Acrobat 9 - TOC

  I am new to Adobe Acrobat 9.  I need to create a Table of contents in a 170-page document.

  Previously, I went through and bookmark all titles and AI have connected all titles.

  Now, I need to know how to create the table of contents and how to print a list of bookmarks.

  Can someone help me please?

  Thank you

  Ideally, your table of contents should be created before you create the PDF file. If you use a program like InDesign or FrameMaker, you can easily create the table of contents with links created in ID or frame and then generate the PDF file and your links will be preserved. You can always create a table of contents in a separate file, insert it into the part before the file and hand tie each element, but it will be a pain if you need to update your document on a regular basis.

  I moved it to a proper forum Acrobat so that others who have different ideas can post and help out you.

• have dell dimension 4700 xp need help with outlook express I have error message and can not send email

  I need help to figure out why my outlook express does not work when I try to send a link, or email. I have a dell dimension 4700 xp restored. The error message cannot find the server with an error code number. I am a newbee so one who responds to it will have to break it down for me. So far, I had lots of help from proceeding to audio and graphics, and I am totally grateful for the help I get.

  Thank you, Gina Davis

  I have

  He has already worked with Outlook Express? Using OE? Hotmail is a Webmail service.

  How to add your Hotmail e-mail account to Microsoft Outlook Express
  http://windowslivehelp.com/solution.aspx?SolutionID=99d4b13d-13dB-40D8-9cdf-172002d4194c

  If you don't want to use OE to access Hotmail and want to just use IE to access Hotmail, then just copy the link and paste it into a new message from Hotmail.

• Need help with packaging CS4; activation of 10.10 and 10.11 customers

  We have a package made by activating the former employee worked in 10.9 OSX clients. Now, we need to rebuild and get the activation job. Our license is provided.

  Is likely not to be able to do this because of the 'special' required to install OLD programs on the NEW Mac (see below)

  But to help you, you need these 2 links... Packer links https://forums.adobe.com/thread/1586021

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• Need help with the design of a professional network and implement using Windows Server 2008.

  original title: CNS Capstone Project

  Network design and implementation. The project includes an important process of CCES in life cycle of the product as the collection of data and analysis, needs assessment, planning

  design, test strategy, documentation, etc. in fact build a network simulated by using existing equipment.

  The name of the firm co..   wide are network will connect all the sites with regional hubs. WAN will rely on a two-layer hierarchical model. locations

  LAX, DCA EGKK AND ZSPD all REGIONS will BE connect to san diego headquarters, composed of many disprate TCP/IP servers will be the only ro0uters of network protocols

  installed at each location basic WAN. Each building standardimplentaion active directory windows 2008 I re-branded, PROJECT MANAGEMENT how is that, I have a lot of project management books, but I need a Visual, I have a moment hard to read I'm more show me I learn hands on I went back to school and I am new to this can you help me graduating in March if I pass this capstone project.

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Need help with EEM applet 'info type snmp oid' and 'Add' the syntax of commands

  I am trying sample and adding a number of OIDs in the mib/ISDN on 2431 & 2921 boxes.  The number of T1s on the boxes can vary with the model and configuration of the box. I studied the OID I want to loop through and am sure those to whom I need to try, but I can't build the digital oid using the command 'Add' and get the SNMP get command use the result.  Here is my test cmdlet:

  config t

  No test event manager applet

  applet Test Event manager

  event no

  Info action 200 type snmp oid 1.3.6.1.2.1.10.20.1.3.1.0 get-exact type! isdnSignalingGetIndex

  game action 202 j "$_info_snmp_value".

  game action 203 I '1 '.

  game action 204 k '2 '.

  206 action value calls '0 '.

  action 210 all $i lt $j! Browse the ISDN interfaces

  action 215 all 4 $k! Browse calls in & stats connectes.2 &.4

  game action 220 myoides "1.3.6.1.2.1.10.20.1.3.3.1."

  action 222 Add $myoid ' $k$ I ".

  Info action 223 type snmp oid get exact $myoid

  action 224 puts "" myoides = $myoid, i = $i, j $j, k = $k, value = snmp oid = $_info_snmp_value ".

  action 225 regexp ' [0-9] + "" $_info_snmp_value ".

  the 226 if action $_regexp_result eq 1

  227 Add $Calls action $_info_snmp_value

  game action 228 $Calls "$_result '.

  229 action puts 'calls is $Calls. "

  230 action ended

  action 232 increment k 2

  end of the 234 action

  action 240 increment i

  250 action ended

  end

  clear all system event handler

  test run the event handler

  Here is the result when I run the cmdlet:

  bctrunks-2431-2 #event man run test

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 2, 2 = snmp oid value

  Calls = 0

  myoides = 1.3.6.1.2.1.10.20.1.3.3.1, i = 1, j = 2, k = 4, 2 = snmp oid value

  Calls = 0

  Here's a snmpwalk on Solaris 10 of the poll server the OID I am trying sample and add

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.1.0

  SNMPv2 - SMI:transmission.20.1.3.1.0 = INTEGER: 2<---- this="" is="" isdnsignallinggetindex="" which="" is="" 1="" +="" last="" isdn="" port="">

  -bash-3, $00 snmpwalk-v1 - c TWC-default 10.40.209.2 1.3.6.1.2.1.10.20.1.3.3.1

  SNMPv2-SMI::transmission.20.1.3.3.1.1.1 = Counter32 : 10

  SNMPv2-SMI::transmission.20.1.3.3.1.2.1 = Counter32 : 10<----- this="" is="" the="" number="" of="" isdn="" outbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.3.1 = Counter32 : 2

  SNMPv2-SMI::transmission.20.1.3.3.1.4.1 = Counter32 : 2<------ this="" is="" the="" number="" of="" isdn="" inbound="" calls="">

  SNMPv2-SMI::transmission.20.1.3.3.1.5.1 = Counter32 : 0

  -bash-3, $ 00

  In this case, the cmdlet must obtain the OID 1.3.6.1.2.1.10.20.1.3.3.1.2.1 & 1.3.6.1.2.1.10.20.1.3.3.1.4.1 values and add them.

  The comand 'append' does not seem to be working properly, as indicated by the value of myoides.  The IOS command result search tool for the "add action".

  order does not explicitly say where the result of append it is placed, so I guess that the result is placed in the variable 'myoides' in my test applet.

  I have successfully used the 'action info exact snmp oid get-type type' syntax in the past, but I do not know if it works using a constructed string variable.

  Let me know if you can help me.  Thanks in advance.

  Add use the variable name not its value.  Try this instead:

  action 222 Add myoides ' k $I ".

• Need help with a self-join select the parent and child

  Hi all
  
  I have an OFFICE table that will hold the Oncology, district and division of the hierarchic is Oncology-district-> division >
  
  I want to list Oncology, district and division with its parent of the value of the following

  provinc     district      division
  
  A            NULL       NULL
  A            A.A         NULL
  A            A.A         A.A.A 

  -- Create table
  CREATE TABLE OFFICE
  (
    SLNO         VARCHAR2(20 BYTE),
    OFFICE_NAME  VARCHAR2(20 BYTE),
    PARENT_SLNO  VARCHAR2(20 BYTE),
    TYPE         VARCHAR2(2 BYTE)
  );
  
  ALTER TABLE OFFICE ADD (
    CONSTRAINT OFFICE_PK
    PRIMARY KEY
    (SLNO)
   );
  
  ALTER TABLE OFFICE ADD (
    CONSTRAINT P_C_FK 
    FOREIGN KEY (PARENT_SLNO) 
    REFERENCES OFFICE (SLNO));
  
  
  INSERT INTO OFFICE
    (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE)
  VALUES
    ('1', 'A', NULL, 'PR');
  INSERT INTO OFFICE
    (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE)
  VALUES
    ('2', 'A.A','1', 'DT');  
  INSERT INTO OFFICE
    (SLNO, OFFICE_NAME, PARENT_SLNO, TYPE)
  VALUES
    ('3', 'A.A.A', '2', 'DV');  

  I need your help.
  Thank you.
  
  Published by: Dipabkar Banik (DB) on June 13, 2011 12:17 AM
  
  Published by: Dipabkar Banik (DB) on June 13, 2011 12:18 AM
  
  Published by: Dipabkar Banik (DB) on June 13, 2011 06:45
  
  Published by: Dipabkar Banik (DB) on June 13, 2011 06:47

  Try this

  SELECT   CONNECT_BY_ROOT (office_name) provinc,
               DECODE (LEVEL, 2, office_name, PRIOR office_name) district,
               DECODE (LEVEL, 3, office_name) division
        FROM   office
  CONNECT BY   PRIOR slno = parent_slno
  START WITH   parent_slno IS NULL
  

• Need help with the earpiece of video events complete and twinkle in Web site button

  Hello.

  I'm building my first site flash on AS3 and I'm having some problems that I can't solve.

  Question No. 1:

  I have a video that plays on a page (frame) and want to go to the next page after the video is finished. It's pretty easy... I did a search for information and came to the top with something in the sense of (written in memory):

  instance.addEventListener (Event.COMPLETE, instancecomplete);

  
  function instancecomplete(event:Event):void {}

  gotoAndStop (3)
  }

  And it worked fine when the page loaded initially (it was the homepage), but after he moved to the next page, I clicked the button which takes back me to the homepage and what might happen is that the video would play for about 1 second and send me back to the next page. My assumption is that what is happening is in loading, the event listener is to see that the video does not play, assuming that it is finished, and it takes me to the next page. If this is true, is there a way to delay the eventlistener?

  Question 2:

  The buttons on my page of sparkle. I read on this topic, and I apparently it's because I'm on a mac. I checked on a PC and the flicker isn't here so it must be because im on a mac. On a forum I found the following line to fix it:

  btnHome_mc.buttonMode = true;

  The problem is... I never wrote this line, and if it is a code generated automatically, I can't find it in the scripts of action... so I'm stumped. Any help?

  I don't know what to say without seeing the code.

  Try to remove the listener:

  function onComplete(e:VideoEvent):void {}

  instance.removeEventListener (VideoEvent.COMPLETE, onComplete);

  }

• Need help with Windows 8 Configuration of the updates to fail and return

  
  

  I solved the problem by doing this...

  I have disabled the start secure in the bios, reformat the computer through the partition to restore by using the 'Minimized Image' option, disabled the automatic updates, manually downloaded KB2871389 and KB2917499 and installed, then ran the troubleshooting of Windows Update, and it then allowed me to start the download from the Microsoft Store wihtout 8.1 get updated which were needed for Win8. As I type this 8.1 is the installation. I cross my fingers and hope it works. I have WAY too much time invested is this crazy situation. Microsoft is getting worse day by day.

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address

• Hello need help with the opacity mask.

  Hello need help with the opacity mask. I hope someone out there can help

  I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable.  Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).

  However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)

  The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me?    I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.

  The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
  

  

  The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).

  Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.

  What is the difference here?   Not much of a problem, because either way I can release OM to be able to change the grad.

  The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.

  

  I hope someone can help. Very appreciated

  
  

  See you soon

  Dave

  Dave,

  I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.

  Illustrator help | Transparency and blending modes

  represents the masking objects.

  Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.

  I think that it is perhaps the issue.