Problem turn off the PC and reboot

Similar Questions

• my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

  my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

  Check here > share your Internet connection with Personal Hotspot - Apple Support

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Whenever I have turn off my pc and reboot later, the time and date go to 0.00

  Original title : improve system performance slow slow start

  Whenever I have turn off my pc and reboot later, the time and date go to 0.00

  Probably means the ROM BIOS chip gone bad and must be replaced. Its a small coin like chip located on your motherboard. You should be able to buy one on where one sells computers and electronic products.

  How to replace the BIOS chip on a motherboard . eHow.com

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• All lights on screen Flash - Message - Please turn off the printer and turn it back on

  I'm fighting a problem for a few weeks now with all the lights on the display starts flashing and the message please turn off the printer and turn it back on.   HP sent me a new printer that does the same thing.  The printer is an Officejet Pro 8600.  My computer is Windows 7.  I use a Belkin 750 db wireless router.  I talked to the service the customer several times with no results.  Did a hard reset of the printer, change the SSID of the router, because I think that one of my neighbors has the same router.  The thing most effective I did was change the channel to 6 which will operate for several hours until the display starts to Flash again.  Channels 1 & 11 starts blinking after a few minutes.  I know there are other people who have had the same problem.  I'm about to throw the thing in the trash.  My last printer brand X was set up the same way with no problems.  On the network, there are 2 iPads, smart TV, and an iPhone.  Need help please!

  Super Dave

  Ethernet cable and connection with correction of the problem.  Its been 2 days and the printer worked perfectly.  Please pass this solution on your technical telephone support staff because I know that there are others with the same question.  Thanks for your help.

• I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

  Hi vasilisp36877173 ,

  Please see these items:- Learn how to enable or disable Adobe applications

  Solve the problems of activation and deactivation of Adobe and error messages

  Let me know how it goes.

  Kind regards

  Christian

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• Should I turn off the keyboard and bluetooth mouse off?

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  JosfromSydney wrote:

  Hello

  I'm new to Apple products and have recently purchased an iMac with keyboard and mouse compatible bluetooth.  The are a switch on each accessory to activate the bluetooth on or off.  Should I turn off after closing down to save the battery power or not this wear simply on the switches.  Not sure if stop actually stops transmitting wireless accessories, or if the latter uses the negligible power when the computer is turned off.

  Thank you

  JosfromSydney

  Yes switches turn off the wireless, and yes they use negligible power when the computer is turned off.

• When my battery is fully charged, what button I press to turn off the battery and use the DC

  When my battery is fully charged, what button I press to turn off the battery and use the DC. I need to know what to do to avoid the impoverishment of my battery. OR is it save to leave the computer on, even when the battery is fully charged

  Well, actually from what I read, it's correct exactly as it goes, but not a complete list of the maintenance of the batteries all the factors, methods, practices and details regarding the definition of periodicals.

  While he was just more info not really part of what has been requested, this is why I don't give him properly a collection, I appreciate that you expand on it with greater precision.

  It is not often that one of my messages is considered as not long enough.  :-)

  Thanks for the help.

• Disable the ability for applications prevent turn off the screen and start screen saver

  Hello

  I need to disable the ability of application full screen to turn off the screen and start screen saver. Basically just need to it:

  When there is no entry in the application that is running in full-screen, I want to turn on the screen saver and turn off the display. As far as I know, the windows default settings is to prevent turning on the screen saver during modes full screen.

  Thanks for the reply

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, I understand that you have related questions screen saver settings in Windows.

  A screen saver is a program that, including the screen or filling it with moving images or patterns when the computer is not in use.

  Screensaver programs were designed to help avoid these effects by automatically changing the images on the screen during periods of user inactivity.

  Windows uses photos that better match your monitor for locking screen slide show.

  For more information: See photos on the desktop, start and the lock screen

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• What is the order to turn off the constraints and index

  Hi, I need to make some out of constraints and indexes on tables to load quite a date in them. I know that I can just drop them and recreate later. But is it feasible to figure who forced and in what order must be do disable or unusable before a load and after the load that is to say. without dropping to preserve? R before P data loading, and then P before R like I think that controls can jump in evertytime and are quite safe to deal with. But I did not carefully think about more, maybe you have some scripts that say exactly what should be the order to turn off the coast and later on this subject.

  Thank you!

  Hello

  946279 wrote:

  Hi, I need to make some out of constraints and indexes on tables to load quite a date in them. I know that I can just drop them and recreate later. But is it feasible to figure who forced and in what order must be do disable or unusable before a load and after the load that is to say. without dropping to preserve? R before P data loading, and then P before R like I think that controls can jump in evertytime and are quite safe to deal with. But I did not carefully think about more, maybe you have some scripts that say exactly what should be the order to turn off the coast and later on this subject.

  Thank you!

  That's right: disable foreign key constraints before disabling the primary (or Unique) key constraint correspondent.  When you reactivate them, re - enable the constraint of primary (or Unique) key before the corresponding foreign key constraints.

  Aside from that, the order should not issue.

• How to turn off the tips and announcements in InDesign CC with to make their appearance in the light yellow

  How to turn off the tips and announcements in InDesign CC with are appearing in yellow frames clear when you hover over with the mouse

  Hi Robuncas,

  Open your preferences and to the tab interface in ToolTips select None.

  See screengrab below.

  John

  

• Acrobat 8 Professional can not repair acrobat for El Capitan on mac. If I click Cancel the program repairs her self and work. Once I turned off the computer and restart the same problem persists.

  Acrobat 8 Professional does not work when trying to open .pdf documents. Repair instructions does not work. I use OS X El Captain on my mac. However, if I click on the tab to cancel the program request to make changes to the my computer and when I give permission to the program corrections and to open documents (also the work of program OK after the corrections are installed). However, when the computer is turned off, the corrections are not preserved and I have the same problems whenever I start. How can I get a download to make permanent fixes?

  Post edited by: Alvin Strickland - Acrobat 8 Pro initiates changes automatically once I give permission for changes to the computer and does so in a few seconds, the document opens.

  Hi alvins52918593 ,

  Would like to inform that Acrobat 8 Pro is not compatible with this version of MAC OS.

  Please see this KB article for version requirement older:- Tech specs | Adobe Acrobat Pro XI

  Kind regards

  Christian

• Turn off the monitor and input block

  Hello

  I am trying to create simple VI that will turn off the monitor (or screen saver turns on) and entrance to block mouse and keyboard - user so won't be able to see the screen and do any action. I use system32.dll for this.

  My problem is that when my VI turn off the monitor, user can enable it back by simply moving the mouse or using the keyboard, similarly as these devices are blocked (by the function BlockInput of System32.dll).

  How can I do the ultimate freeze?

  Attached VI is based on Danny_Funk 'disable the monitor.vi.

  Dear bieneck,

  This is a very interesting problem you have there. I was snooping around Microsoft technical support for a bit, and the only reasonably simple method, I found was running powercfg.exe from an elevated line comand. You can query wake programmable devices with powercfg - devicequery wake_programmable poster theand disable using "Your device name" powercfg - devicedisablewake. Here you can find a more detailed documentation.

  Except that I have found no reliable method that will spare you excessive digging in the registry. Maybe some 3 rd party tool?

  One more thing: If your goal is to prevent the user from interacting with anything, it would be easier to make up a large modal window that does not workaround? At least, it seems to me that it is much simpler to use a native Windows function that is not provided for this purpose.

  Kind regards: