Need help with background body color

Similar Questions

• I need help with my HP color laserjet 2605dn. None of the computers on my local network can 'find '.

  The IP address on the printer displays as 000.000.000.000 I figured out how to change it, but I don't know what to take.  Should I update the network mask and gateway too?  I really want to get this working.  Don't want to have to buy a new printer.

  Thanks in advance for any help

  Hello

  0.0.0.0 means the printer disconnected from the network...

  Any change of the IP address will not apply as long as the printer is disconnected.

  First of all, try to restart the printer so the router and check any change.

  Try to plug the ethernet cable into another port on your router, then check any chamge (most probably you will see 4 ports listed as 1-4).

  If there is no change yet, try to replace the ethernet cable and check any change.

  If there is still no change, try to plug the etehrnet directly from the printer to one of your PC - if the printer will connect in this way, it means that there is something wrong with your router.

  If the same by both direct connection, this means that the printer ethernet card is defective and you need to service the printer.

• Need help with background noise?

  If some people have been talking and making nosie while I was recording minecraft and talk about how to remove or disable it?

  HawkEye,

  Welcome to the forum.

  I agree with Steve, and especially if you have human voices, which must be removed without affecting the other sounds in your video.

  Tips & tricks article talks about general background noise and its mitigation or removal: http://forums.adobe.com/message/2860521#2860521

  Unfortunately, your case will be a bit harder, because you need to mitigate or remove Audio-specific, speific points - much plus-travail by hand, with less overall adjustment. Yet, with the work, you could get more close to what you want.

  Also, see this article for tips & tricks, to mitigate the Volume (and Gain), an Audio Clip, even at specific points: http://forums.adobe.com/message/3472343#3472343

  Good luck

  Hunt

• Newbie needs help with default link colors

  I've seen too many times active in the movement, episodes 4 & 5 (Adobe TV - Tom Howard) count. Here's my problem:
  
  My footer links are not white - I carefully labeled them that way. To override the violet I'm loaded and never asked (should be the default color), I went into the preferences page and changed the active status of white - but always the purple text appears. I went in CSS coding and made sure all the code is correct, and it seems that it is. Here are my codes "four copy / paste" as stated in the tutorial in my CSS file:
  
  {a.footernav:Link}
  do-family: 'Trebuchet MS', Tahoma, Verdana, without serif.
  do-size: 9px;
  color: #FFFFFF;
  }
  
  {a.footernav: active}
  do-family: 'Trebuchet MS', Tahoma, Verdana, without serif.
  do-size: 9px;
  color: #FFFFFF;
  }
  
  {a.footernav:visted}
  do-family: 'Trebuchet MS', Tahoma, Verdana, without serif.
  do-size: 9px;
  color: #FFFFFF;
  }
  
  {a.footernav:hover}
  do-family: 'Trebuchet MS', Tahoma, Verdana, without serif.
  do-size: 9px;
  color: #FFFF00;
  }
  
  Links miscolored on another site:
  I have another site where I really don't like the substitutions on the color of the text, but I can't get a handle on why he won't let me to choose my colors for different pages. For example, in some regions, the blue color for the pages 'visit' is fine, with the exception of a blue navigation bar - the text disappears in the navigation bar. Then... I can say that it is a consistent struggle I am now my second site.
  
  If someone could help me, I would really appreciate it. I am fairly new to all this and have been able to understand many things. This, however, is really a thorn in my side.
  
  For your reference to look into it, see website of this test by copy - paste this address into your browser - see the purple in the foot?
  
  http://www.fairwoodcommunitynews.com/Web%20Design/WDSHome_3/WDSHome.html
  
  It's really an urgent problem. All you can provide immediate feedback would be appreciated.
  Text

  Thank you very much! I tested it on the home page and it worked perfectly - working on the rest! So... for the neophyte of coding, copy the following code:

  
  
  

• Need help with background image a clickable link

  Hi guys,.

  I want to make the background of my site a background of advertising where the background image is clickable.

  I tried a few tutorials, but none seems not to work

  What I have, it's like my CSS...

  #skin {position: absolute;
      width: 100%;
      height: 800px;
      margin-left: auto;
      margin-right: auto;
      top: 0px;
      left: 0px;
      z-index: -1;
      background-position: fixed;
  }
  

  .. .and this as my HTML code...

  <div id="skin"><a href=""><img src="background.jpg" /></a></div>
  

  It works soon, but the link is only a thin strip of hand and side of the screen for some reason any and don't extend to the background of the entire image.

  Does anyone have any ideas as to where I'm wrong?

  I thank you and hope to hear from you!

  SM

  Spindrift wrote:

  Basically, what I want to do, is to have a skin of advertising that the background (maybe just a dummy container div to serve in the background) of my site, while he fills the area outside the container div of my sites and opens a link if clicked.

  Anyone know how I can do this?

  This can be done relatively easily, but it's not very pretty. You will need to use a full great for the background image, unless you plan to repeat, and then assign the clickable containing exactly this size. See code and screenshot below. Tested in FF, Chrome and IE9.

  

• whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  whenever I load photoshop there a permanent color instead of white and I need help with fixing asap, thanks!

  It's a broken screen classic, easily corrected profile

  See this thread: https://forums.adobe.com/message/7926040#7926040

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Newbie needs help with cookie cutter in PSE8

  I'm new to PSE8, the cookie cutter tool and work with layers, what I need help with to accomplish what I want to do.

  I want to use one form of cookie cutter to make several 'holes' in an image, leaving a solid color background layer to show through. (Or another path, use the form of Cutter of biscuit as a solid 'rubber stamp' color to stop shape on the image in several places)?

  I opened my image in the editor and create a solid color fill layer, and then I select the shape of Cutter of biscuit that I want to use, for example a sheet.  Then I select the color fill layer, click and drag to create the sheet randomly somewhere in it.  When I release the mouse button, the window returns to the image and there is the leaf, locked in a box, in the color I want, on the image. I drag the box (leaves) to where I want it and click the green checkmark to accept. So far so good.  Here's the problem: in order to create another sheet on the image, I have to create another layer of fill and repeat the whole process.  If I try to use the same fill layer to a second sheet, the first sheet disappears.  I must be missing something very simple, but I can't figure out how to get out several sheets of a filling layer.  Also, I use a version without the constraint of the sheet because I would create several sheets of different sizes out of the fill layer as well.

  I would be grateful for any help or suggestion!

  Try the following:

  1. File > new > empty file - white
  2. Create a new layer, fill it red
  3. Create a new layer, fill it out of blue
  4. Access the marquee tool, drag the rectangle to the blue layer. You should see "ants in market". Press DELETE on the keyboard.  You should see red in the rectangular hole.
  5. Access to the custom shape (U) tool. In the form of culture library, select the heart shape black all and hang out on the blue layer. Press CTRL + left click the thumbnail of the layer of the capping layer for "mobile dotted." Hit delete on keyboard twice, and you should see red in the heart shaped hole.
  6. Continue with other forms.

  

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with mobile layout

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match these mobile Office layouts

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  I used heights in the header because I'll have code for desktop, mobile and tablet in the CSS so it changes (and do not know how to support better). Also need to Add a link to the logo image background in header.

  Thanks in advance!

  TheOriginal150mph wrote:

  Hello. Need help with my layout sensitive, using straight lines only html5 and css3 that I can understand and explain a novice level please - without any restart. Desktop and mobile are in a single html doc. The desktop version is 'ok '.

  current version (6_2)

  Try to match thesemobile Officelayouts     

  On the mobile version:

  -Impossible to get the buttons nav blocks, vertical text button Align, and align the image of the product (square pictures) to the Center. (margin: auto; does not work)

  Commenting on just a habit of property changing the css if you have defined it for the desktop version. Your nav elements are not vertically Center because you have a bottom padding set on them for the office, there are only changes for mobile in your css media query.

  .main-nav a {}

  display: block;

  text-decoration: none;

  / * padding-bottom: 15px;   */

  Padding: 12px 0;

  }

  Change the properties for the .product-images for mobile boxes: you have float attached to them for the desktop version and which cascade down to the mobile version, unless you change in the media query:

  .product-image {}

  float: none;

  Width: 50%;

  margin: 0 auto 20px auto;

  }

  As I mentioned in one of my posts related to your project, you will probably have to make your product images a bit larger. They fill the area once they form a column to width of 768px screen or you could resist transform them to one column until a little more by using a media query extra set at a narrow screen width to evoke this action

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now