Need help with BIOS on my Satellite L40

Similar Questions

• spectrum xt: need help with BIOS pwd

  Hi, need help here, I also forgot the BIOS pwd

  and I like code 59838445

  Thank you!

  Hello

  Enter 46790481

  Kind regards

  DP - K

• Need help with installing Win7 on Satellite L70-A-12W

  I bought Satellite L70-A-12W with preinstalled victory 8.1 two days ago... I have no recovery of win7, but I have Win7 64 Bit DVD new.
  I would like to install win 7. I follow the instructions concerning the closing down, on Bios (I have version 1.3) safety boot is disabled and the boot mode is MSC mode.

  I did a recovery on USB media if something with is wrong. Earn 8.1 I installed Paragon Partition Manager 14 (free version) and see the Partition Table. It UriPattern like this:
  1 partition - system - 1-GB NTFS (Partition of Service);
  2. partition (no name) - 100 MB - it's the gray color.
  3 partition (local partition) - 128 MB;
  4 partition C: (win 8.1) - Go 920 - NTFS drive.
  5. partition - recovery - 10.1 GB - NTFS (Partition OEM Service).

  I would like to keep evrything what is, if possible, and instead og Win8.1 install Win 7 ultimate 64-bit (which I have). And after than that, resize this partition of 100 GB and make a second partition private for my data - partition D: - for example.

  I did things in the BIOS and win7 DVD and got error massage: Windows cannot be installed to this disk. The selected disk is of the GPT Style partition...

  I found a solution to clean the disc in the BACK, but I'm not sure that I have with this procedure will delete oll data disc. I'll guarantee loos e if I do this... If all other partitions will remain instead of C--> I can always make backup returns with media recovery with win 8.1 and hopes to keep the warranty.

  Now, I don't know what I have to do...

  I would just have win 7 on my laptop with minimal change to the partition table and all the partitions instead of C (where now is win 8.1).

  Could you please help me...

  Hello

  The question is: why you want to keep the present partitions on the HARD disk.
  Using two systems Win 8 and Win 7 on this laptop?

  The fact is that if you want to use only Windows 7, it s not appropriate to keep the old partitions on the HARD disk.

  Secondly, you already have the Toshiba Recovery flash memory stick.
  This recovery media allows you to return to the factory settings.

  This means that recover the laptop using this memory flash USB stick recovery would again create the same partitions and install the Win 8.1 System.

  Finally and above all Windows 7 supports 4 primary partitions as primary partitions are applicable to the tables of partition MBR and partition table MBR allow four primary partitions.

  After you create the primary partition 4th Windows system will accept only the volumes 'Dynamics' (logical drives). You must create an extended partition containing many logical partitions.

  However, if you use a table of GPT partition that is supported by the 64-bit Windows versions, you can configure up to 128 partitions and you need t differ between "primary" and "extended" partitions

  In addition, the GPT partition table also requires the UEFI BIOS.

  More details here:
  http://support.Microsoft.com/kb/2581408

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN

• Need help with formatting my laptop Satellite M40

  Dear all,

  I have a satellite M40 notebook and when I bought it was running perfectly. Then the sound has deteriorated significantly with the Harman / Kardon speakers without drastically.
  Then, the speed of the applications has deteriorated in opening. Then I could not use my DVD RW drive to back up my data. In my opinion, happened after I tried to install a software that may be in conflict with the existing drivers.

  Finally, I decided to format the laptop and start over. With my original purchase came three CD: DVD - ROM Recovery DVD-ROM, Express Media Player Recovery CD and additional software.

  I tried the first two CDs, hoping that the laptop start automatically on their part, and then everything will be fine. Unfortunately, nothing has happened.

  Help, please. How can I format this machine and resume my busy days at the office.

  See you soon

  Hello George

  For the installation of an operating system, you need to RECOVERY DVD. Put in the DVD player, turn on the unit and press the C key on the keyboard. Keep it down for a short period and the procedure of the facilities will begin.

  If you want to preinstall the unit I recommend you create two partitions using facilities expert mode. Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=4462&messageID=14518#14518

  There is step by step explanation. If you want to use the Express media player again once it must be installed first before using recovery DVDs. The procedure is the same (press the C key).

  Good bye

• Portege Z835 - need help with BIOS update

  Hello.

  I have a Portege Z835, with a battery problem: do not load. The battery indicator says "3% connected load" but it doesn't load the battery.

  Some forums said that the solution is updating the Bios. I have a Bios Update v.1.60 ready to install. When I try to install, we get the message "the battery power is not enough.

  My power cord is still connected. If I unplug the power cord, the laptop is turned off.

  Please, what can I do?

  Thank you.

  F.

  To be honest I don't think it's the related issue of the BIOS. AFAIK battery must be charged, even if the laptop is turned OFF so why BIOS update if the battery can not be charged at all.

  To me that sounds like hardware related issue.

  How old is your Portege?
  Warranty is still valid?

  Maybe you should contact Toshiba service and ask for help or even their opinion.

• Need help with the beep codes, Satellite x 205-SLi1

  Hey guys, a few days ago I tried to turn on my Satellite x 205 SLi1 and I got was 3 beeps, no screen. The first tone is quieter then the next two. What could this be?
  I tried to replace the ram sticks with new and n t work I looked around for answers and I have not seen anything.

  Anyone has any ideas on what could be the problem before I take it a shop?

  I googled for the BIOS error beeps and it seems that the 3 beeps as it means that there may be a problem of graphics. I would like to send the device to an ASP for repair.

• Need help with bios

  Hello, I recently got a "pny nvidia geforce gtx 750 1 GB ddr5' and I tried to install it and I heard a sound of beeping 3 times and got a black screen, indicating the model number of gpu and I went on the web to see solutions. I tried many of them but two, one is to buy a new motherboard and other is install the latest driver for bios. I had no money, so I went with a bios update. As I tried to update I got an error message "253" Please help. my pc specs "hp Pavilion slimline 1224, UC-i3-3240 upgraded, gpu no, 1 TB hdd, 6 GB of ram."

  When you request support, please provide the full model name and product number (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the side, back or bottom of your computer, or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Assuming that you mean that you have a desktop HP Pavilion Slimline s5-1224, there is no update BIOS in the WIndows 7 section of the page of drivers of desktop HP Pavilion Slimline s5-1224. The error you get indicates that the update is not for the version of the BIOS of motherboard and base of your computer.

  Again, it is likely that the video cards, you tried are incompatible with the motherboard of your computer. In addition, power supply factory is only rated at 220 watts and is unlikely to properly feed a 750 GTX graphics card that requires power system rated at 400 watts or greater.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Need help with installing Linux on Satellite Pro A300

  Hello

  I would like to install Linux on my laptop and am wondering which is the best distribution I can use and is it simple to follow guide to use so I'll get to the top and running with a dual boot with Microsoft Windows Vista?

  Please help because it is really important to me!

  Appreciate your help in advance.

  Thank you
  Bill.

  Hello

  To be honest I didn't install Linux on my laptop with Vista and XP.
  Sometimes, I use Linux Live distribution called Koppix, and I m satisfied!

  The devices have been recognized, and most of the drivers were included.

  Maybe it s an option for you too

  But Ubuntu might also be interesting for you.

  Check this box:
  http://www.Ubuntu.com/

• Pavilion dv7: need help with BIOS password reset

  Hello, could you please help I reset the BIOS password on my laptop. Key is: 63471748. Thank you!

  @Ryhel

  Sorry got so confused trying to help the other 5 at the same time.

  Enter 72559388

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Help, please! need help with bios password recovery

  Hi I have a HP G62. After failing to enter the correct administrator password 3 times, it gives me the error code 50889491. Can someone help me please?

  Hello

  Enter: 45781417

  Kind regards.

  DP - K

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon