Need help with DVD player

Similar Questions

• Need help with DVD drive - Qosmio G30

  Hello

  Sorry, my English is so bad. I need your help. I have a Qosmio G30 (PQG32E) and I have a problem in the DVD player. I see a (!) instead of the DVD drive in Device Manager. I think it's a problem with the driver. I don't know what I can do to solve this problem.

  Please can you help me?

  Perhaps this problem can be solved very easily.
  Have you noticed a code error 31 or 32?

  Possibly a registry entry is corrupted.
  Go into the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Remove the drive from Device Manager CD/DVD, and then restart the laptop.

  I would appreciate any comments from you.

  Good luck

• NEED HELP WITH DVD DRIVE DON'T READ DO NOT DRIVE

  DVD player does not try to install a software, but it does not even recognize that a disk has been placed in the pilot. Think that I removed it by accident.

  Hello

  1 does happen with all disks?

  2. you get any error message?

  3. What is the brand and model of the CD\DVD driver?

  4. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Try to run fix it from the link below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

  Hope this information is useful.

• need help with flash player

  I have upgraded to windows 10 and you do not have adobe flash on my computer. I tried to download it, but I get a message that says that adobe flash player is built into windows 10 and does not need to be downloaded. How can I fix it?

  @ !

  Hi Donna,.

  Please see the link below, it should help:

  Flash Player issues. Windows 10 | Microsoft edge

  Let us know if that helps.

  Kind regards

  Bani

• Need help with flash player using w/Win7

  OK, here we go. I have - Windows 7 Home Premium 6.1.7601 running service pack 1

  Type of system: x 64-based pc

  Windows Internet Explorer 9 (update version RC) 256-bit

  I use to be able to watch videos on youtube ect. But now flash player does not work. What is the problem? I have Adobe flash player 10 activex and installed shockwave player 11.5 and still it asks me to update my flash player. Need help.

  Hi, thanks. This "Perfect Optimizer" which was found and removed, McAfee did remove or MBAM?

  Is the trial version of MBAM, the free version which is a stand alone, which is run from your desktop or a version installed?

  You see the animation of the Flash Player logo and what version of Flash Player is available on the following site?

  http://www.Adobe.com/software/Flash/about/

  Then check on this Shockwave Flash object in your addons that I mentioned before.

  I want to ensure that a certain number of things and then have another procedure for you and explain once I get an answer from you on the above.

  Thank you

  eidnolb

• Need help with Media Player (latest version)

  Well, I tore my first two CDs in Windows Media Player (11) and which went well. I have synced them (because I can't figure out how to do drag and drop) and which went well. So I started to rip CDs more and got as much as 4 when a message came and I deleted inadvertently. Then, it would show that I'm ripping, but have no songs OR album titles. I went to the media player but cannot find how to fix this problem. I'd appreciate any help to make it back to where it is rip CDs and indicating the name of the album and song names. Judy (who has been blocked by snow and not liking it)

  Are you connected to the net by tearing? The network connection is needed to get the tag data.

  Again click Extract, click on more options, then the library and retrieve additional information on the net are checked, and then click OK. I think it's the parameter that tells it to get the data from the tag on the net? It is easy to copy files to the drive with Windows Explorer. Open Windows Explorer(right click on start, then click on explore). Find your music under my documents, my music file (or something similar). Find the folder with the music inside album. Right-click on it and choose copy. Then find the folder music of the rocket in Windows Explorer. Right-click on it and choose Paste.

  Click the extract and make sure that the format is set to mp3 format. Click it again and make sure that the flow is set to 192 or 256.

• Need help with VMware Player to run!

  I've been using VMware Player 7.1 successfully for some time, but my drive hard host started making noise, so I installed a new SSD drive as drive C on the host computer.  My old hard drive installation was 8.1 for Windows 64-bit, but needed to be cleaned, so I did a clean install of Windows 8.1 64 bit on my new SSD for the host.  My guest OS (8.1 64-bit Windows) has been installed on drive E, then I'm not touching this player.  I then installed VMware Player 7.1 and all is well.  However, when I now run VMware Player 7.1 and try to open my (8.1 Windows 64-bit) guest OS, he says now that the Intel VT - x is disabled.  I've never touched the BIOS at all, but to check I went into the BIOS and Intel Virtualization is always on because it has been.  My system is a motherboard ASUS Sabertooth with an i7 processor and 16 GB of ram.

  So I rechecked everything in the BIOS and made sure the virtualization is enabled.  What else can I do to get VMware Player 7.1 running?  Help, please!

  The log file created when I tried to run the guest operating system is attached.

  Thank you

  Abby

  It is indeed strange that there is a difference with no changes to the BIOS. In any case, other messages in the forums, it seems like some antivirus/end point protection applications can cause these issues (see, for example, binary translation is incompatible with the long mode). You have already installed this application?

  It might be interesting to see vmware.log from the virtual machine HARD disk.

  André

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• Hi, I need help with my flash mp3 player

  Hi, I need help with my mp3 player, I wan't to add the pause button... Can you help me?

  I created the button I added btn_pause and it won't work.

  function soundStatus() {}

  var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal ();

  _root. Loader.loadBar._width = amountLoaded * 260;

  duration = _root.sound_mc.sound_obj.duration;

  position = _root.sound_mc.sound_obj.position;

  _root.playHead._x = position / duration * 272 + 5;

  }

  btn_play.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.songStarter (songfile [song_nr]);

  };

  btn_pause.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.sound_obj.pause ();

  };

  btn_stop.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.sound_obj. Stop();

  };

  btn_fw.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  (song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++;

  _root.sound_mc.songStarter (songfile [song_nr]);

  };

  btn_rev.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  (song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr;

  _root.sound_mc.songStarter (songfile [song_nr]);

  };

  < proposed by the mod to as3 - kglad >

  :

  function soundStatus() {}

  var amountLoaded = _root.sound_mc.sound_obj.getBytesLoaded () / _root.sound_mc.sound_obj.getBytesTotal ();

  _root. Loader.loadBar._width = amountLoaded * 260;

  duration = _root.sound_mc.sound_obj.duration;

  position = _root.sound_mc.sound_obj.position;

  _root.playHead._x = position / duration * 272 + 5;

  }

  btn_play.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.songStarter (songfile [song_nr]);

  };

  btn_pause.onRelease = function() {}

  clearInterval (timeInterval);  you must re - set interval when the unpause button is clicked

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.sound_obj. Stop()

  };

  {btn_unpause.onRelease = Function ()}

  This._parent.sound_mc.sound_obj. Start(position/1000);

  }

  btn_stop.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  This._parent.sound_mc.sound_obj. Stop();

  };

  btn_fw.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  (song_nr == songfile.length - 1)? _Global.song_nr = 0: _global.song_nr ++;

  _root.sound_mc.songStarter (songfile [song_nr]);

  };

  btn_rev.onRelease = function() {}

  clearInterval (timeInterval);

  _root.timeDisplay_txt. Text = "00:00 / 00:00 ';

  (song_nr == 0)? _Global.song_nr = songfile. Length-1:-_global.song_nr;

  _root.sound_mc.songStarter (songfile [song_nr]);

  };

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.