communication continuum problem

Similar Questions

• Cannot download book. Get the following message. "Error getting license server communication MW_ADEPT_CORE_EXPIRED problem" I have no confidence in this type of communication because I never received answers from the forums / wish you could afford to live

  Cannot download book. Get the following message. "Error getting license server communication MW_ADEPT_CORE_EXPIRED problem" I have no confidence in this type of communication because I never received answers from the forums / wish you could afford to live person

  I select a book to read in my library, it takes me to digital editions and this message appears. Worked for a few years, but something's happened, maybe I did but don't have and making matters worse there is no contact to fix it. Get the following message. "Error getting license server MW_ADEPT_CORE_EXPIRED communication problem" I have

• Chroma DC power supply RS232 communication (read problem of over-voltage and current)

  Dear all.

  I chroma programmable DC power. Based on the programming of the Instrument manual I develop using RS232 communication. Based on the program I can set the voltage, current, over-current protection, protection against overvoltages and make IT / OFF out put supply perfectly.

  But I have to read the measured values of the output power as current and voltage. Measured applications are the voltage and current of the output of the power supply. My problem is two of them read at the same time. Currently, the reading is only voaltge or current (if the first request is v? it is voltage read out but no reading for the current) and if the first request is CURR? the reading for the current, but not for VOLT? The status message is OK, even if it is to read values.

  Thanks in advance

  What I see in your program, it's that you do not use the stop for reading character. For your writing, you do the hard with all these concantanate string functions. You can set the stop character for all entries with a node unique propert - "ASRL end Out.

• Simple PCI Communications driver problem - formerly gateway Vista 32 Bit Q6600

  Hope someone finds an answer that left me speechless.

  I upgraded from Vista to Windows 7 Home Premium 32-bit version without a problem. However I noticed my video card on the bus PCI did not and I had to use the built in video to installation.  Check in the device he showed intel and a hex code I wanted in the driver database. The entrance really didn't say much. I tried downloads from Intel and pretty much everyone says to install the OS was not correct or the PC did not meet the minimum requirements. So no luck on the Intel Management Engine of the version or the drivers or inf updates.

  The gateway website has my model but supported stopped at Vista 32bits, so no luck there.

  The chipset is the 965 short-lived one Intel at this time.

  It's a shame to leave a really nice pc of themselves to lose. Performance statistics are all very well except for the video those handicapped by Intels minimum support built-in.

  Does anyone know of a for Win 7 PCI simple communication driver that can be done to install it?  Update of Windows, search for the update and the internet search come up with nothing.

  This is apparently a well known problem with few definitive answers. Now, I could say that the driver never existed.

  Experts in gateway, Microsoft and Intel, please save my pc!

  Thank you

  Radstger

  Radstger

  Install the Vista driver in "compatibility" mode

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• Qualcomm-Atheros Communications Bluetooth problem on

  Hi I have a samsung laptop and it came with windows install 8 with her and she also can with Qualcomm-Atheros Communications Bluetooth suite and worked very well until sometimes I don't remember, but it stops working so I tried to update with windows updater and a program of samsung that came with her I have tried and tried over and over again but his does not please me If it is able to fix thanks

  Hi Matthew,

  Please provide more information for me to better understand the issue.

  1. what version on Qualcomm Atheros Bluetooth do you use?

  2. What is the model of the Samsung computer?

  3. what program Samsung have you tried to run to solve the problem?

  4. do you get an error message? If Yes, what is the error message?

  5. don't you make changes to the computer before the show?

  I suggest you to reinstall the suite and check if it helps.

  You can follow the steps to uninstall the software.

  a. press the Windows key + X , and then select Control Panel.

  b. Select programs and features in Control Panel.

  c. Select Uninstall a program.

  d. find the software and click Uninstall.

  You can check the link for the suites.

  http://www.QCA.Qualcomm.com/technology/technology.php?NAV1=49

  For further assistance, you can contact Samsung.

  http://www.Samsung.com/in/support/main/supportMain.do?supportIaCode=10004

  Please get back to us if you have questions about Windows. We are here to help you.

• Communication Server problem

  I have my first app magazine multifolio of development in the newsstand. The first launch of the application (using the .ipa installed in the sandbox environment), the library updates and the first number is displayed correctly. Tapping it and choosing to subscribe, or otherwise, by tapping the banner to subscribe, allows me to use my test user that I set up in iTunes Connect. He asks the relevant questions, which I allow it, but in the end, I get the following error:

  Server Communication problem - your subscription was purchased with success. Unfortunately, it has encountered an error in the determination of the issues that are available for download. Your subscription will be applied the next time that the library will properly update.

  I have a free subscription that is put in place for this application. There is no subscription to retail. I can download the issue successfully without subscribing, but I'm trying to nail down this issue of subscription.

  I don't know what it takes to start looking to solve this problem.

  The app is also currently under review and was deported back today by Apple for showcase empty en, which, since the screenshot, they sent me, didn't go in the first issue, but showed "purchase of subscription...". "at the top of the screen. I can only assume that the problems are related.

  I have rebuilt my app in the DPS App Builder, downloaded to my iPad and still have the same question. All my certificates seem to be valid.

  Someone at - it experience with the resolution of this one?

  Thank you.

  Rob

  Yes, that would be my first guess. Make sure that the shared secret is specified.

  Neil

• Garmin Communicator Plugin problem

  This is not fixed: https://support.mozilla.org/en-US/questions/971855?esab=a & as = NAQ. I have reset Firefox 3 times. I uninstalled and reinstalled the Garmin Communicator plugin. It's on my list of Firefox plugins. When I go to download from my device, Garmin Connect said that the Garmin Communicator plugin is not installed and asks me to download it. I try to download and Garmin Connect says that it is already installed. It is installed and works very well with Explorer, and Chrome. Firefox only said that it is not installed. He used to work very well with all previous versions of Firefox. Does not work now and none of the troubleshooting patches work. Please notify. Thank you.

  To restore your old settings, you can create a new profile with the old files. This thread describes a way to do it: I just reset Firefox, are my Add ons in the 'old Firefox data' folder and how to find them?

• HP Compaq 6000 Pro MT: PCI Simple Communications controller problem

  Hello.

  Recently I bought HP compaq 6000 Pro format microtour to used market. Today I bought the TP Link wireless network PCI card. I installed the drivers but it did not work. I noticed that I have not the PCI Simple Communications controller installed drivers. I searched on Google but could not find the drivers. So I decided to come here to ask.

  Can you please link me to the controller drivers PCI of communication Simple?
  
  I am running Windows 7 Professional 64 - bit OS on my PC.

  Hope I get some answers as soon as possible.

  Thank you.

  PS: Sorry if I didn't post it in the appropriate section. I have no idea

  Hello:

  You need the driver for this device.  This should have no impact on the wireless adapter, you have bought does not.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4023815 & swItemId = vc_75040_2 & swEnvOid = 4059

• Primal community edition problem

  Hello

  I was at vmworld, and went to a meeting where Alan Renouf built a script of gui using Primal Community Edition. I was impressed and wanted to give it a try. So I did a 1 button script to do something simple, get the virtual machines.

  It does not work. Any thoughts what I am doing wrong:

  #Generated form-function

  GenerateForm {} function

  ########################################################################

  # Code generated by: SAPIEN Technologies PrimalForms (Community Edition) v1.0.10.0

  # Generated On: 10/09/2013-14:35

  # Generated by: Eric

  ########################################################################

  #region import assembled

  [reflection.assembly]: loadwithpartialname ("System.Windows.Forms"). Out-Null

  [reflection.assembly]: loadwithpartialname ("System.Drawing"). Out-Null

  #endregion

  Form generated #region objects

  $form1 = new-Object System.Windows.Forms.Form

  $button1 = new-Object System.Windows.Forms.Button

  $InitialFormWindowState = new-Object System.Windows.Forms.FormWindowState

  #endregion generated Form objects

  #----------------------------------------------

  Script #Generated event blocks

  #----------------------------------------------

  #Provide of custom Code to events specified in PrimalForms.

  $button1_OnClick =

  {

  SE connect-VIServer-Server "avh-vcenter" - Credential(Get-Credential)

  Get - VM

  disconnect-viserver-confirm: $false

  }

  $OnLoadForm_StateCorrection =

  {#Correct the initial state of the form to prevent the maximized .net question form

  $form1. WindowState = $InitialFormWindowState

  }

  #----------------------------------------------

  #region generated form Code

  $System_Drawing_Size = new-Object System.Drawing.Size

  $System_Drawing_Size.Height = 262

  $System_Drawing_Size.Width = 284

  $form1. ClientSize = $System_Drawing_Size

  $form1. DataBindings.DefaultDataSourceUpdateMode = 0

  $form1. Name = "form1".

  $form1. Text = 'primal form '.

  $button1. DataBindings.DefaultDataSourceUpdateMode = 0

  $System_Drawing_Point = new-Object System.Drawing.Point

  $System_Drawing_Point.X = 133

  $System_Drawing_Point.Y = 110

  $button1. Location = $System_Drawing_Point

  $button1. Name = "button1".

  $System_Drawing_Size = new-Object System.Drawing.Size

  $System_Drawing_Size.Height = 23

  $System_Drawing_Size.Width = 75

  $button1. Size = $System_Drawing_Size

  $button1. TabIndex = 0

  $button1. Text = "get virtual machines".

  $button1. UseVisualStyleBackColor = $True

  $button1.add_Click ($button1_OnClick)

  $form1. Controls.Add ($button1)

  #endregion generated form Code

  The initial state of the form #Save

  $InitialFormWindowState = $form1. WindowState

  #Init the OnLoad event to correct the initial state of the form

  $form1.add_Load ($OnLoadForm_StateCorrection)

  #Show form

  $form1. ShowDialog() | Out-Null

  } Function #End

  #Call function

  GenerateForm

  Thanks for your help!

  No, but there was still a name of one of my virtual machines in the script.

  I've updated the attached script, try again.

• I have problems with my PCI simple communication driver

  laptop HP 2000

  I have troubleshotting my PCI simple communication driver problems I have no driver to install in my laptop

  Hello:

  Go to the page of the driver and support for your laptop, download and install the Intel Management Engine Interface driver found in the section chipset driver.

• Problem with "untrusted connection"...

  commune of problem, but I tried a few common fixes

  check the date and time on my systerm and history and also a restoration of the clearing system.

  I'll give you the example of hotmail, but this is also the case with googlemail, facebook and other Web sites.

  This connection is Untrusted

  You asked Firefox to connect safely to blu179.mail.live.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  blu179.mail.live.com uses an invalid security certificate. The certificate is not approved, because no sender string has been provided. (Error code: sec_error_unknown_issuer)

  I am running firefox 31.0, which I believe is to day and im running a virus scan, nothing presented yet, also system restore did not resolve the issue.

  From edict of the further reading: Facebook is not confidence, also other devices on my WiFi did not have this problem.

  fixed a problem of all, with the help of my anti virus provider, thanks anyway

• problem writing series cRIO

  I want to communicate between cRIO-9073, and PC, the master will cRIO. Now am with VISAS for communication, my problem is when I write from PC and read in RIO I can do. But when I write of RIO and read from PC I could not able to read. No value is coming. I don't know what I'm missing. Maybe the difference in speed? Do I have to change baud rate? Now, I put to 9600 in the two.

  Can someone please help?

  Am still not familiar with the serial port signals but I'm trying to help you. Just do a test: disconnect the cable from the RIO and just turned the numbers 2 and 3 of the serial port cable and run both at the same time code in the host. If you receive data properly, then the problem could be with the cable (right or pivot) option.

• The website has encountered a problem and cannot display the page you are trying to view. Error 0xC800042D

  Hello

  Using XP 32 bit system. Lenovo IBM Thinkpad 1951BS8. SP3.

  I reinstalled win XP lately due to a failure.

  Everything seems to work ok, but can not get updates of victory for work.

  Thank you.

  Hello

  This error can occur because of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  Follow the steps listed in this article to resolve the problem:

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Problem with e-mail notifications

  We are experiencing some problems with notifications.

  Nobody in our company receives any updates trough email, although everyone has notifications and collections of e-mail activated.

  Is there a problem with emails, or do we need to configure anything else to turn the notifications?

  Hello:

  If all members of your community has problems with notifications, it can be a problem with your e-mail filters. Did you check unnecessary folders to ensure that emails are not stuck there? You may need to apply for leave IT '[email protected]' then these emails are blocked.

  Hope that helps,

  Socialcast VMware team

• VISA, read and write checks are block after there is no more lines to read

  Hi all

  I am developing a communication continuum between a microcontroller Arduino Uno and LabView. The issue I'm having is to 'Write' and even 'Stop' controls are block once all the initial reading lines are read in. I'm pretty sure that this is because the reading line prevents the complete completetion of the while loop, suspending all the loop until it indicates something else. I tried a number of Boolean operations and I can't work around the problem. The code itself needs a way to detect has nothing to read and ignore the read statement and continue a loop until the user activates the "write" command and writes something. The read command would have would be to read and wait again for user input.

  Any suggestions and help would be great! Thank you!

  * Note that I was using labview for all of 2 weeks. I'm getting used to it but I'm not a pro for sure.

  Also, I would like to give credit to physicslight @ https://physicslight.wordpress.com/2014/07/14/arduino-labview-serial-write-read/ for provide an arduino auto detect sub vi for easy then to initialize the VISA controls

  Seems I solved my problem. Using the Instr:Bytes function of the Port, the reading error is fixed. Addition of a few cases to see entry written and that it is received and a delay just incase seems to have fixed my code! If anyone has a similar question see my attached code