Need help with implementing NLB on top of MSCS 2008 R2 to achieve active-active clusters

Similar Questions

• Need help with implementing DLL based on LabVIEW below call Lib

  Here is the list of C functions in the doc that I have, but I don't get the right result.

  I need help to understand how these features and how to configure it in LabVIEW

  Parameters

  voltType
  [in] Specifies a voltage detector to get the value of. There may be flags
  VCORE (1<>
  V25 (1<>
  V33 (1<>
  V50 (1<>
  V120 (1<>
  VSB (1<>
  VBAT (1<>
  VN50 (1<>
  VN120 (1<>
  ATV (1<>
  retval
  [out] Points to a variable in which this function returns the voltage in volts.
  Typesupport
  [out]
  If the value is specified as a (non-NULL) pointer to a variable, it will return the types of sensors available in indicators at the level of the ILO-ORed
  Return value
  TRUE (1) indicates a success; FALSE (0) indicates a failure.
  Remarks
  Call the function first with a typesupport non-NULL of the sensors available fan and a subsequent call to get the required voltage.

  Thanks to all...!

  I solved this problem.

  There was a problem in the configuration of the VoltType. We have a cluster of bits.

  Here is the screenshot.

  

• Need help with implementing a stream with OUT and FMS

  Hi guys!

  I'm new to this sort of thing, so I'd be delighted if you could guide me or tell me if it is even possible to what I'm trying to do.

  That's what I'm doing:

  I am currently working on a project for the University College of Narvik in Norway. We're experimenting with some laboratory equipment remote control. We want the video stream live from the lab for the students to see.

  Then.

  I would like to implement a stream of my webcam that are accessible through a Web page by anyone (with a minimum of delay)

  That's what I understand I have to do:

  Use to connect to the webcam OUT and OUT on FMS and somehow it go on my Web page.

  It's the bit of Flash Media Server, I do not understand. How can I go about to go out on my Web page? What I have to use a Flash Streaming as Onyxservers service to do this, or can I do that part myself? If so, how complicated is it?

  Best regards

  Daniel Bjorkman

  Narvik University College

  all you need to do is replace the localhost URI to point to the IP address or the DNS name of the server on which resides the FMS. the rest of the URL remains the same.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with image fusion

  Hello

  Before I get to my question, I want to give you a glimpse of the project I'm working on and the aspects that I need help. For a school project, a customer, 94Fifty asked us to create an advertisement that depicts their basketball and could be used in advertising online and in magazines. The 94Fifty of basketball is the world's first "smart ball." It can count how many times you dribbling, the arc of your shot, release time it takes for you shoot, etc. To use the ball, you need an Apple product that can download the application 94Fifty on the App Store, so that this project is done as a collaboration with the company 94Fifty and Apple.

  For my ad, to really capture the idea of being the first smart ball, 94Fifty ball I wanted to mix an image of the texture of the ball of 94Fifty, with the shape and details of a brain, with the slogan being, "A ball that is as smart as you." I have my design buried on, but I'm not sure how to combine the image of the brain with ball should I use layers? How can I remove the pink color of the brain and replace it with the ball while keeping the shape of the brain and the lines creased the brain? Any help and technical that you can give would be greatly appreciated.

  Here are two pictures that I'm trying to mix.

  

  I would also try and keep the logo of 94Fifty which is on the ball in the mixed picture.

  Please do not confuse this for to ask me someone to do it for me, it's the exact opposite of what I want, I just need help with what to do.

  Here is a fairly simple method:

  First of all, level of basketball for the type to be horizontal. (Also correct the values of white light - burn at the top left and bottom top right.)

  Mask on white background of the brain and turn the image to 0% of saturation.

  Put the brain on basketball on its own layer. Make the overlay blend mode.

  Using free transform, reshape the brain is greater (rounder), like the basketball, with a visible margin around the edge of the ball.

  -Now, you have a brain in a basketball, but the brain is a bit too subtle.

  Duplicate the layer of brain as many times as you need to get the good contrast (I've duped the layer of brain three times, for a total of four layers of brain).

  You will probably find that you need to use the levels adjustment layers or curves on each layer of the brain, for finer value adjustments. Make sure that each adjustment layer affects only the layer directly below.

  

• Need help with this gallery of xml!

  I have build a gallery but its very simple... There are pictures of the xml file.

  I have attached all the zip files.

  I just want two things if anyone can help.

  first of all when I press the next button, he's going to the next image, but without effect. It just displays the following image... I want to incorporate the effect of dragging when the image is changed to another.

  and secondly, I want to use the AutoPlay feature.

  Once swf starts images came one by one with a vertical drop of a few seconds.

  Thanks in advance... I really need help with this..!

  For the look of sliding effect using the actionscript class Tween.  Allows you to create motion tweens using the code.  The example below will be tween property _x of the instance named anObject from 0 to 300 in 3 seconds...

  import classes before using

  Import mx.transitions.Tween;
  Import mx.transitions.easing.Regular;

  TW var = new Tween (anObject, "_x", Regular.easeIn, 0, 300, 3, true);

  To implement an enforcement function auto you need to import all the images first, in the order, then you will need to use form any controlled timer, such as setInterval (with clearInterval not to need) in order to have things turn on automatically by some part-time

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389