Need help with these questions of virtual machine?

Similar Questions

• Need help with copy/move a virtual machine to Mac Pro for MacBook Pro

  Hello

  I have Fusion 7.1.1 installed on my Mac Pro (lap) and my MacBook Pro (laptop). I am copying my virtual Windows machine 8.1 of the tower to the laptop. I copied the. vmwarevm file from the tower to the laptop. When I try to import the virtual machine in Fusion on the laptop it is grayed out. I don't know why 'find Virtual Machines' does not work either.

  
  

  Thanks for any help,

  
  

  Steve

  Have you tried "Open and run" in the file menu of Fusion with the 8.1 Win as target VM?

  Note that if it works, ask if it has been copied or moved. If you Copied, renewal may be necessary because the MAC address has been changed.

• I need help with a question command line syntax

  I got 3 issues that need to be entered in command line / syntax.
  I had no training in command line and need help for that setting in the command line syntax.
  (The IP address is a fact).
  This will be done also on a PC that requires elevated permissions. So if a programmer can zip through it in no time it would be much appreciated. Perhaps one without high and an example with.

  1 setting up daily ping test to a server with the IP 10.254.254.1 which will be composed of 1 000 ICMP echoes.
  2. establish daily ping tests to a server with the same IP address which will consist of one hundred 1 500 bytes ICMP packets.
  3 configure these run every day and are output to a text file.

  Hi Matt,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums.

  Please post your question in the Windows 7 IT Pro: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  Thank you.

• Need help with two questions about preinstalled WXP Tecra A11 - 10F

  Hello world
  hope someone will help me with these:

  1. sometimes left port my A11 USB and eSATA port close do not recognize any device I plug.
  In win7 there is a power management option with which this can prevent to met, but how can I do under XP?

  2 - is there a way I can put a fixed amount of RAM on the graphics accelerator? (The two o/s)

  Thank you in advance.

  Alessandro

  Hi Alessandro,.

  1. as far as I know that this option is not available on Windows XP. Vista and Windows 7 provide several obsolete as XP power management features. All you can do is to install Toshiba Power Saver if it s not installed. Here, you can set power saving for the processor, cooling fan, etc., but USB is not available.
  In your case, I'll try an update of the chipset driver.

  2. No, fixed the amount of RAM can t graphics card game. This will be controlled automatically.

• novice needs help with some questions

  I was myself ball how to design a website that is now almost complete, I need help, ensuring that everything is in order.
  My question is;
  at present, all the img sources are in a file in my computer IE... My Documents\My webs\site\image.jpg
  Now is this good? When I send this through the server it will be placed in another file and then the source will be incorrect?
  Matter that has any help, I know I'm a little sore but I'm just learning!

  If the path you have for your img tags has my documents... then Yes, it will be incorrect when you move the images on your web server. I'll put just generally in the way, I use on the server and worry about the pictures once I get the downloaded pages.

• looking for a little help with 'ownership' of a virtual machine

  Power surge through my apartment while he was working on a school project, (I know I know, im getting a smooth paste to the top soon!)

  Now the virtual machine I was working on the guard telling me that the virtual machine is already is use, which is not, asking if I want to take owenship and and use it anway. by clicking on confirm a get error message saying "cannot open the file 'I:\Virtual Machines\Windows 7\Windows 7.vmdk': insufficient permission to access file.»

  If anyone has a solution for this would be great!

  go to the directory of the virtual machine

  Delete all directories whose name .lck
  You can also find files whose name .lck - they must be removed as well

• Help need help with this question

  How can I add more devices to my list

  You can try and explain a little more clearly what it is you are trying to do? I don't know what you are really asking, especially since you post in the forum of SAI.

• Need help with my Y40-80? power management

  I get message to the center of the Action as follows:

  Compatibility problem between your power management system and Windows

  Your power management system is not compatible with this version of Windows.

  The name of the model of your power management system is ACPI Lenovo compatible virtual controller.

  Can anyone help please. I have windows running Y40-80 8.1 is a clean install of windows 8.1 x 64 all drivers are up to this day, just need help with the question above thank you

  Lenovo today released a new bios update for Y40-80 laptops, I did the update and, so far, the error message that I posted above has not appeared again so set the mite of update of the bios not sure yet, I'll keep up to date on this subject and write again soon

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with setting up in checkbox in interactive reports

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  < input type = "checkbox" name = "f01" value = "1" onchange = "spCheckChange (this); ' / > instead of the checkbox

  Do I need to configure anything else

  Aditya Gupta wrote:

  I need help with setting up in checkbox in interactive reports, I use this statement a query

  SELECT apex_item.checkbox

  (

  1, ROLEID,

  'onchange = "spCheckChange (this);". ',

  : F_ROLEID_LIST,.

  ':'

  ), del.

  ROLEID, ROLEDESCRIPTION

  OF EBA_ROLES

  When I run it I get the following

  instead of the checkbox

  Do I need to configure anything else

  This is one of the most frequently asked questions in this forum. Set the column attribute the text to display as Standard report column and not display text (special escape characters).

  
  

  Always include the information referred to in these guidelines when you ask a question and if you use APEX 5.0, State, if you develop using the pages or the view of the component designer.

• Need help with some cluster power shell scripts

  Guys,

  I need help with 2 scripts.

  Text 1.

  I need a power shell script that will get all the virtual machine in a specific cluster.  Virtual machine names as well as the number of processors, output allocated RAM and size of CSV file.

  Text 2.

  I need a script that will get all data warehouses in a specific cluster and store name data as well as the amounf of free space for a CSV output.

  Thanks in advance guys.

  Greetings, @peter79 -.

  For the first part:

  Get-Cluster myClusterName | Get-VM | Select-Object Name, MemoryMB, NumCpu | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  And for the second, how about:

  Get-Cluster myClusterName | Get-VMHost | Get-Random | Get-Datastore | Select-Object name, FreeSpaceMB, CapacityMB | Export-Csv -NoTypeInformation c:\temp\myDaterstoreInfo.csv
  

  The first would be quite a bit faster by using Get - view instead of Get - VM.  It would be like:

  ## get an array of VM View objects with just the desired/needed properties
  $arrVMViews = Get-View -ViewType VirtualMachine -SearchRoot (Get-Cluster myClusterName).MoRef -Property Config.Hardware,Name
  ## make the two filters for displaying the desired info
  $hshCPUCountFilter = @{n="NumCPUs"; e={$_.Config.Hardware.NumCPU}}
  $hshMemAmtFilter = @{n="MemoryMB"; e={$_.Config.Hardware.MemoryMB}}
  ## display the info, and export to CSV
  $arrVMViews | Select-Object name, $hshCPUCountFilter, $hshMemAmtFilter | Export-Csv -NoTypeInformation c:\temp\myVMInfo.csv
  

  Enjoy.

• Experience with the moving of virtual machines

  I want to ask this question, the opinion of other users in the forum.  I have a host ESX (3.5, 163429).  I'll build a new ESX host and the patch at the same level.  Are there any pitfalls to move existing virtual machines to the new ESX host?  The material will be very different, because it is a newer than my current ESX host server.  I do not plan on using vMotion to move these VMs.  All the tips are greatly appreciated.

  Virtual HW exposed to VMS is identical except for the cpu, VMs are not aware of the real chipset, controllers, memory, scsi, and so on. Cold migration to intel AMD does not need to change anything inside the virtual machine. However, the physical processor *IS* visible to virtual machines. So, if you are running VMs that loading a specific kernel for processors Intel or AMD CPU (like Linux), you may have a problem.

• Need help with a declaration of 'IfThenIfNot '.

  Every year couple I need help with a script statement and these forums have been incredibly useful. Once more, I was hoping that someone out there had knowledge of something I am writing for a form, I need to automate:

  In the jargon of Excel that I try to write to would state so @if (("Subtotal"+"InvestigativeFee"+"PlanReviewFee") > 1000, + 100, + (("Sous-total" + "Investigativ Manar" + "PlanReviewFee") *. 1))

  What I have here is three form named subtotal, InvestigativeFee & PlanReviewFee fields.  The formula in question says it's a 'technology assessment fee"of 10% on the total part of what above mentioned 3 fields but there is a maximum charge of $100 for this tax.  The statement that I wrote above would have worked in Excel (not tested, but generally is the idea).  I was hoping someone mastering JavaScript could help me with a statement that I needed to do this work.

  Hope to hear from someone,

  Warmly yours.

  Steven L in Eugene OR

  Try the following in the custom calculation of the fresh field of evaluation script:

  Custom calculation script

  (function () {}

  Maximum package

  var max_taf = 100;

  Get the values of the field as numbers

  var v1 = + getField("Subtotal").value;
  var v2 = + getField("InvestigativeFee").value;
  var v3 = + getField("PlanReviewFee").value;

  Calculation of tax

  TAF var = (v1 + v2 + v3) / 10;

  Set this field to royalty calculated value if less than maximum, otherwise the maximum value

  Event.Value = (taf< 100)="" taf="" :="">

  })();