Need some advice/tutorials please.

Similar Questions

• Need some advice on a motion graphics/editing PC build.

  Here's the deal. I was builing custom PC of for more than 20 years, but not a system anything close to that I intend to build then and need expert advice and information about a person to her. I'm looking to build a system designed for video editing, creating motion graphics and 3D modeling, and some argue more questions about which components would be best for my needs (mainly on the graphics card and hard drives).

  
  

  The first is the card video (s). And I say 'maps' because I don't know if I need more a card for what I am trying to accomplish. I have create many long 3D animations and complex using Blender and After Effects, in addition to changing a variety of projects in creation and you want the best bang for my money. My budget for this system is quite high ($5 k and 10 k $) and I know I can get amazing at this price performance if I get the right equipment. Thus, on the cards. From what I have gathered, briefly, Google search, is that I want a card with CUDA Nvidia for video editing. My main question in this area is, would be to dual graphic cards or using SLI quad be good in what I'm doing or is SLI mainly intended for improved game performance? From what I understand, I think that (at least the video, not sure about 3D animation) is done mainly using the CPU and GPU not; Although the help of CUDA. Basically, I need to know how useful it is. If I bought two or four GTX 980 see a significant improvement in After Effects, Blender or creation? I plan to get one of the top (if not the top) i7 CPU I can find, so it won't be a bottleneck of my CPU performance, so please does anyone suggest to put the money into the CPU rather than the GPU because I already put the maximum amount here.

  
  

  My other main question is regarding hard disks (or solid state). I'm doing a bit of editing and modeling 3D on a laptop and it's getting really well for projects bit, that I have worked so far, but as I started to work on projects that have strict deadlines, I'll need a system that can make it basically as fast as possible. My main question in this area is, should I use any sort of RAID array. I looked at several forums, but none of them specifically answered the question for my unique situation. Most other forums says ' well, if you will only use it for editing and not animation "etc but I'm going to do a 3D animation as well, so I need to know what the answer is in this case instead... I also know that the other messages regarding the change of systems, to recommend the use as three discs for things like "scratch disks". I have a feeling that I'll get a few recommendations here saying I need like seven discs for what I'm trying to make, which are the answers that I really can't wait to hear about. I mainly looked at RAID 5, 6, & 10 but do not fully understand them, and have in fact never implemented in any system I've built so far. From what little I understand, I think that RAID 10 would work better for my needs, which offers a great read & write speeds which is important and also provides redundancy, which IMO is even more important. I can't have the system down for an hour, or worse a week because one of my drives breaks down. My other question in this area is a table of the SSD would greatly improve performance in a RAID 10 array? Would it be profitable? I read in a post recently that drives hard actually handle more large files better than SSDs and worried to SSD in the test bench because they would not be able to handle larger video files and I'll use it frequently as well as hard drives would be. I guess I'll be shooting and editing many 4K projects soon and need a system that will handle this resolution well. If I have to use 4 hard drives in an array of RAID 10 for my OS (the RAID for speed and redundancy), drive a small SSD for a scratch disk and a large SSD or HARD drive for a player video output, please list the exact readers/configuration that you would suggest that I use and why. I am very interested in a bit of a discussion here to get the best possible configuration for the money and will respond to all sincere responses as quickly as possible.
  

  I know I already asked several complicated issues here but am hoping someone with a little more experience that I have in building editing systems can provide some advanced tips and help me and someone else who can try to build a similar system in the future. I know also that this issue is not specifically intended for the AE, but it has to do with this and because EI is editor and motion graphic, I'm find the best advice for a system that will edit video and create animations. Thank you 1 million (in advance) to anyone who provides a contribution instructed in answer to the questions that I have!
  

  simply 2xssd raid 1 (mirror) for the OS/applications.

  1 ssd for zero/previews

  second raid 6 or 10 with the hdd or ssd for the media.   (if you don't get a lot of drives to get the speed, you will want to use ssd.)

  No raid for backups. can use several disks hard, but in combination with off-site, such as cloud backup.

  Optional could be another ssd for cache/export. If the ssd scratch fails, it would be able to support.

  can take a look at the guides of storage here for more information.  Tweakers Page

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• Need some advice FC...

  .. .wondering if someone can give me some advice on fiber channel.

  We are running two without: a former EMC NS20 and a new HDS. Both have CF, but only to systems meeting some, Lun most are iSCSI. We have two switches Cisco MDS 9148 for HA. We currently have a c7000 using iSCSI to one of our SAN systems, all the blades in this system are running ESX 4. I would add this c7000 CF, but I am interested in refurbed 4 Gb CF because we are more expansion of this system (we have an another c7000 using FlexFabric for newer blades).

  I've been searching online trying to figure out what that HBA and interconnection modules would be appropriate. I ran in the QLogic QMH2462 HBAs, Emulex LPe 1105 and I wonder who works more own with ESX 4 and would play well with our switches. I also met a few IC modules options: the "HP 4 GB Virtual Connect Fibre Channel Module" and the "Blade switch Cisco MDS 9124e.

  So I wonder if anyone has any advice what may work better in my configuration. And what experiences anyone could have a similar setup.

  Thank you

  -Mike

  ... QLogic QMH2462 and Emulex LPe 1105 HBA...

  IMO, you can use one of the HBA without problems. I've never had problems with QLogic or Emulex no matter if used in servers in rack or blades.

  ... the "HP 4 GB Virtual Connect Module Fibre Channel" and the "Blade switch Cisco MDS 9124e '...

  The Virtual Connect module is only an option for a C7000 with Virtual connect Ethernet IC modules. I did not work with Virtual Connect from this so far (with the exception of the HP ASE training). I mainly use the Brocade or Cisco IC. In your case, I'd probably go with the Cicso (from the perspective of management), since you already have the switches DMS 9148 in place. However, as you may know, HP and Cisco are not best friends more

  André

• Scroll bar custom text - need some advice please

  Hello

  I need to add a custom text in my project scroll bar.

  It must operate in IE9 and upwards, as well as Chrome, FF and Safari

  I saw a post where Zaxist had created a tutorial for that but it was done some time ago and when I open the sample files in 2014.1.1 and publish it don't look right.

  Someone asked a nice custom (and customizable) scroll bar cross browser compatible to text in EA 2014.1.1 Please?

  Thank you very much

  Hi - I've finally managed to implement a jQuery solution!

  The CSS solution was not suitable for me because the main client browser is IE and there are very few things you can do to change rather ugly (IMHO) scrollbars IE to change the color.

  I used NiceScroll: jQuery NiceScroll plugin - scroll for desktop, mobile and touch devices
  It's really easy to implement-, I never added a jQuery plugin for EA before and tried with a few others, but it's super simple!

  This also works in IE, Chrome, Safari AND EVEN FIREFOX!

  I write here incase everyone present and future needs Ref

  Instructions for v. 2014.1.1, and later - I don't know how to implement for earlier versions.

  1. Download the plugin jquery.nicescroll.min.js and import it into the actions panel in your EA file
  2. DocumentCompositionReady on the main stage in your document has this line:
  3. SYM.$('put-name-of-text-box').niceScroll ();
  4. Add the name of your text box in the first set of parentheses, or if it is integrated into a symbol, you need to add the path to it.
  5. sym.getSymbol('mySymbol'). $('_put-name-of-text-box').niceScroll ();
  6. You add the style in the 2nd set of square brackets.
  7. The web page NiceScroll (link above) has all the css style options listed.

  Here is an example:

  https://www.dropbox.com/s/afst1yfjjwjp4z0/nicescroll.zip?DL=0

  See you soon

  A

• Just made anti-virus Malwarebyte s scan on my laptop and need some advice please...

  When the scan has finished a very long list of problems came, there was an option to remove the problems individually or completely, it would be safe just to delete the lot or it might cause problems, I would really advice you can give me...

  Malwarebytes' Anti-Malware is a reputable program that can be implicitly approved, just remove what it found.

• Need some advice please on Adobe CC

  My PC is dying and must be replaced as soon as POSSIBLE,
  until it dies and then lost everything what it is inside
  So I just bought a new PC, and it is coming very soon

  My questions are:
  How long should I stop (remove) the purchase of a PC and move it to another?
  It is true that sometimes people will have 5 days to reinstall the CC?
  What is the best way to do it and fear that painful?

  Thank you

  How long should I stop (remove) the purchase of a PC and move it to another?

  Minutes.

  It is true that sometimes people will have 5 days to reinstall the CC?

  Not in my experience. Never heard of it unless they you encounter a few problems that they can't solve it easily. I've never met any. Fortunately.

  What is the best way to do it and fear that painful?

  On a computer, open any CC application, click Help > Sign Out to disable

  On the new computer, go to creative.adobe.com/products and download.

• Flash newbie needs some advice on a project

  Hey guys,.

  Thought I'd ask you guys to a general approach on a project I'm starting.  I have a background in computer science, so I lose patience with some of the beginner step by step tutorials that are out there online / in books.  What I lack, it is for you guys to let me know what will be important for me to learn what I want to do and what are the aspects of the Flash I can go without.

  I'm a grad student in Psych clinical and I want to build an interactive processing application.  Which basically translates to is that he will have a series of screens with text, sound, and video clickable icons that will show small films, I developed that my views on the principles of different treatment.  Anyway, I just wanted to know if you guys could give me advice on the best way to do it.  I can animate text and it's kind of basic, but I feel like I kind of sense in the dark right now and do not want to waste too much time on dead ends.  If you guys can give me an idea about the basic components of Flash, I'm going to need a solid understanding of creating a project like this, I would really appreciate it.  I'm sorry if it is vague, just trying to reduce the amount of time I spend of experimentation and if you guys could tell me precisely these modules/tools in the application that I have to use to do this I can take it from there.

  Thank you!

  -Ricky

  If you are looking for shortcuts, you're not likely to find.  The essential elements you need to know to start with the basics and expand from there.

  One essential thing you should learn is how to find and solve things by yourself using the Flash help documentation and a good search engine like Google.  Almost all the objects/classes have 3 basic elements (properties, methods, events) you need to understand how use/manipulate, and they are all identified in the help documentation.

  If you want to work with videos, start digging to learn the different ways that you can integrate... using a FLVPlayback component or the NetStream class.  If you want to learn how to work with audio, then dig learn how to use the Sound class.

• Satellite A200-1AH - need some advice for hard drive replacement

  Nice day

  I've been using a + A200-1AH + for three years. Unfortunately, I suffer from problem of free disk space. So, I decided to replace my drive with a new one.

  How can I know the HDD I buy will be suitable for my laptop?

  Can you please tell me what era the + key-points + I need to know when buying a new hard drive for my laptop?

  Post edited by: alicozgo

  I changed the subject, because it was so dumb. Why would I ask 'what hard drive buy' in a Toshiba forum :) what a forum administration...

  Hello

  Satellite A200 is a more recent series of laptops. This series of laptop use and support the SATA HDD controller and this means that you need a SATA HDD!

  The laptop runs the 2.5 hard drives. The speed of the HARD drive is not very important for compatibility so that you can choose 4200 RPM or other

  In addition the SATA controller has no limitation in size so THEORETICALLY, you should be able to use hard drives with 320 GB or more
  But in some cases rare BIOS would not be able to manage some HARD drive sizes, but this generally isn't the case

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• SF200 48P... Need some advice

  Hello and thank you for reading my post.

  I currently have a small network that looks like this... SMC cable modem (with static IP) > RVO16 > connected to some computers and printers > 4 port linksys switch > connect multiple PCs and POS.

  What A location.

  I have another place that looks like this... Cable modem (dynamic IP) > RVO82 > connected to computers, printers and the POS.

  What location B.

  The locations are connected by a tunnel that is used daily and intensively.

  Here are the changes that will happen at A location, I have purchased ip phones and we'll be adding several new computers, printers. all to be connected to the new SF200 48P I bought. It was mainly for ip phones and the POE ports, but looks like it should work well for the whole of the network.

  Should I be setting up small VLANs to say each office which will consist of one IP address and telephone, computer and printer..., there will be about 8-10 like this.

  I want to keep offices and connected places and maintain security at a good level. I need quality of Service for ip phones.

  Not really sure if I should use the RVO16.

  Also wondered if maybe the RV180W-A-K9-NA would be a good choice instead of the RVO16 because it also has VPN.

  I intend to update location B with a new switch, IP phones, computers and printers as well. (next year as cost is the factor of this year)

  Any thoughts would be appreciated.

  Thank you

  Steve

  Hi Steve, the RV016 supports multiple subnets and VLANS based left only.

  The RV180 much better address this traffic because it supports the 802. 1 q VLAN.

  -Tom
  Please evaluate the useful messages

• Upgrade to DW8 to CS4. need some advice/info

  Since 1 year that I'm on DW8 (Studio 8) that I started doing websites with this program. (it is far much interesting as the progam that I had before).

  This year, I learned PHP and databases and dynamic Web sites.

  I think I have the CS4.

  Now, I have a few questions which I hope you can give me some info or advice:

  (1) can I upgrade only the DW8 off Studio 8 until CS4?

  (2) at - there a lot of difference between them.   The option is located somewhere else or buttons or are still in the same place?

  (3) can I still use my old page of DW8 in CS4?   Or should I convert or rebuild?

  (4) common bugs in CS4.  I wonder what I'm not technical to overcome a few bugs that seems easy to pro.

  Thanks in advance

  Kind regards

  Martine

  (1) can I upgrade only the DW8 off Studio 8 until CS4?

  # If you have 8 Studio, you must go to one of the suites which includes Dreamweaver.

  (2) at - there a lot of difference between them.   The option is located somewhere else or buttons or are still in the same place?

  Yes, there are a lot of changes, but you will find most of the things in the familiar places. Change that confuses many people when they first open CS4 is the Inspector is now an HTML view and a CSS view. However, once you go account links can only be created in HTML, most people display adjust pretty quickly.

  (3) can I still use my old page of DW8 in CS4?   Or should I convert or rebuild?

  HTML and CSS are the same, so you can use the pages without any update. If you have created all the PHP pages, you need to rebuild a lot of server behaviors unless you use Dreamweaver 8.0.2. If you use the version 8.0.2, all right.

  (4) common bugs in CS4.  I wonder what I'm not technical to overcome a few bugs that seems easy to pro.

  No software is perfect, but in my experience, Dreamweaver CS4 is very stable. There is a bug that annoying some dialog boxes, such as the dialog box insert Div don't remember what you choose in a drop for the first time. You must choose the same value again so he could stick.

  I'm sure you will find plenty of doomsayers who disagree as to the quality of CS4. The only way to choose is to try the demo version and see for yourself.

• I need some advice on how to upgrade my MBP mid 2010 HDD to SDS without using clone software

  Unfortunately, I had resisted the upgrade of the OS and kept my Snow Leopard running for a few weeks when the incompatibility of the various things became a nuisance I took the plunge and upgraded to OS El Capitan. That pretty much killed my hard drive. It kept failing good start and eventually when it did, no matter what function took forever to action. I took it to the Genius Bar and after a few tests it came with hard drive failure. In accordance with the notice given to me - I was told I should buy a Samsung EVO 850 and it would take me 10 minutes to install and simply use time machine to move my data.

  I can happily work on people, but the machines seem to much more complex.

  I decided to do a little reading and now am a little stuck and confused as clearly this is not so simple.

  I have a SATA cable / USB. I think I know how to mount the SSD with the SATA connection format and then fresh install OS El Capitan.

  The thing to note is that my MBP has been an erratic behavior of 2-3 years with gel and episodes of kernel errors and downtime. I thought previously, it had something to do with an external application - google chrome and got rid of this to use Opera instead. He made much less frequent mistakes but nevertheless still occurred.

  For this reason, it does not seem logical to use clone apps (although much would have made life easier) and I need to somehow this the long way round... or so I think, but please correct me if wrong.

  I have a Time Machine backup before I upgraded my OS, and before you try anything, I'll do another then its judgment the new OS.

  My questions are:

  1. after formatting my SSD, I should make a partition?

  2. is it acceptable for then simply drag a copy of the OS El Cap to the SSD and run hopefully leading to installation?

  3. What is the best way to migrate my data?

  Note that I'm not a tech savvy person, have never done anything like this before and its taken me weeks to reach these conclusions to date.

  With step by step instructions all tips are welcome.

  Thank you.

  Create partitions first, then format each partition.

  I think you need to create a USB flash drive install and then boot from the flash drive and go launched the installation process.

• I want to convert my logic large table - multiply in a library called the faster, need some advice on the code of C.

  Hello everyone,

  In my VI, I have a code that looks like this-

  

  Each table is 2D size 512 by 640.  The time it takes to run this whole chain is approximately 28miliseconds. Seems fast, but I need to cut it to about 10ms.  I tried to make the tables 1 d, but saves only about 2 ms.  I even tried to cut the table 1 d in half and duplicate the code and then combine them at the end (a half-hearted attempt at optimizing multi-core) and who showed zero improvement...

  I guess my last option (please let me know if there are other options) is to compile a DLL that will do this for me.

  I'm a bit confused on how I'm supposed to implement table multiplies in C, however.

  What I do run for(;;) a loop and multiply each item one by one?  It seems that that would be much slower than anything done LabView in-house to do this multiplication of cross-checking.

  Thank you!!

  MK

  If you don't know how you would in C, I don't know why you think that move it to a DLL will make it faster. In C, you will need to either make operations sequentially in a loop for, as you mentioned, or find a library for parallelization of this operation. There is no built-in c function to multiply the tables.

  One thing you might try in your LabVIEW code is to multiply it in a loop for, where you make an addition to each iteration and store the result in a shift register. Also remember the current power of the original array into a shift register. Which should reduce the number of copies of the table you need, which can speed up to turn the code. So, you initialize it the 'sum' with the first table shift register and the shift register current electric table with the result of the subtraction (or, Alternatively, with a table of the same size, filled with 1, according to the order in which you want to do things). Multiply this table by the first multiplier, add it to the sum, and multiply the power of the original (subtraction) table, storing to the power shift register. Repeat until you are finished.