Scroll bar custom text - need some advice please

Similar Questions

• Just made anti-virus Malwarebyte s scan on my laptop and need some advice please...

  When the scan has finished a very long list of problems came, there was an option to remove the problems individually or completely, it would be safe just to delete the lot or it might cause problems, I would really advice you can give me...

  Malwarebytes' Anti-Malware is a reputable program that can be implicitly approved, just remove what it found.

• Need some advice please on Adobe CC

  My PC is dying and must be replaced as soon as POSSIBLE,
  until it dies and then lost everything what it is inside
  So I just bought a new PC, and it is coming very soon

  My questions are:
  How long should I stop (remove) the purchase of a PC and move it to another?
  It is true that sometimes people will have 5 days to reinstall the CC?
  What is the best way to do it and fear that painful?

  Thank you

  How long should I stop (remove) the purchase of a PC and move it to another?

  Minutes.

  It is true that sometimes people will have 5 days to reinstall the CC?

  Not in my experience. Never heard of it unless they you encounter a few problems that they can't solve it easily. I've never met any. Fortunately.

  What is the best way to do it and fear that painful?

  On a computer, open any CC application, click Help > Sign Out to disable

  On the new computer, go to creative.adobe.com/products and download.

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.

• Need some advice on a motion graphics/editing PC build.

  Here's the deal. I was builing custom PC of for more than 20 years, but not a system anything close to that I intend to build then and need expert advice and information about a person to her. I'm looking to build a system designed for video editing, creating motion graphics and 3D modeling, and some argue more questions about which components would be best for my needs (mainly on the graphics card and hard drives).

  
  

  The first is the card video (s). And I say 'maps' because I don't know if I need more a card for what I am trying to accomplish. I have create many long 3D animations and complex using Blender and After Effects, in addition to changing a variety of projects in creation and you want the best bang for my money. My budget for this system is quite high ($5 k and 10 k $) and I know I can get amazing at this price performance if I get the right equipment. Thus, on the cards. From what I have gathered, briefly, Google search, is that I want a card with CUDA Nvidia for video editing. My main question in this area is, would be to dual graphic cards or using SLI quad be good in what I'm doing or is SLI mainly intended for improved game performance? From what I understand, I think that (at least the video, not sure about 3D animation) is done mainly using the CPU and GPU not; Although the help of CUDA. Basically, I need to know how useful it is. If I bought two or four GTX 980 see a significant improvement in After Effects, Blender or creation? I plan to get one of the top (if not the top) i7 CPU I can find, so it won't be a bottleneck of my CPU performance, so please does anyone suggest to put the money into the CPU rather than the GPU because I already put the maximum amount here.

  
  

  My other main question is regarding hard disks (or solid state). I'm doing a bit of editing and modeling 3D on a laptop and it's getting really well for projects bit, that I have worked so far, but as I started to work on projects that have strict deadlines, I'll need a system that can make it basically as fast as possible. My main question in this area is, should I use any sort of RAID array. I looked at several forums, but none of them specifically answered the question for my unique situation. Most other forums says ' well, if you will only use it for editing and not animation "etc but I'm going to do a 3D animation as well, so I need to know what the answer is in this case instead... I also know that the other messages regarding the change of systems, to recommend the use as three discs for things like "scratch disks". I have a feeling that I'll get a few recommendations here saying I need like seven discs for what I'm trying to make, which are the answers that I really can't wait to hear about. I mainly looked at RAID 5, 6, & 10 but do not fully understand them, and have in fact never implemented in any system I've built so far. From what little I understand, I think that RAID 10 would work better for my needs, which offers a great read & write speeds which is important and also provides redundancy, which IMO is even more important. I can't have the system down for an hour, or worse a week because one of my drives breaks down. My other question in this area is a table of the SSD would greatly improve performance in a RAID 10 array? Would it be profitable? I read in a post recently that drives hard actually handle more large files better than SSDs and worried to SSD in the test bench because they would not be able to handle larger video files and I'll use it frequently as well as hard drives would be. I guess I'll be shooting and editing many 4K projects soon and need a system that will handle this resolution well. If I have to use 4 hard drives in an array of RAID 10 for my OS (the RAID for speed and redundancy), drive a small SSD for a scratch disk and a large SSD or HARD drive for a player video output, please list the exact readers/configuration that you would suggest that I use and why. I am very interested in a bit of a discussion here to get the best possible configuration for the money and will respond to all sincere responses as quickly as possible.
  

  I know I already asked several complicated issues here but am hoping someone with a little more experience that I have in building editing systems can provide some advanced tips and help me and someone else who can try to build a similar system in the future. I know also that this issue is not specifically intended for the AE, but it has to do with this and because EI is editor and motion graphic, I'm find the best advice for a system that will edit video and create animations. Thank you 1 million (in advance) to anyone who provides a contribution instructed in answer to the questions that I have!
  

  simply 2xssd raid 1 (mirror) for the OS/applications.

  1 ssd for zero/previews

  second raid 6 or 10 with the hdd or ssd for the media.   (if you don't get a lot of drives to get the speed, you will want to use ssd.)

  No raid for backups. can use several disks hard, but in combination with off-site, such as cloud backup.

  Optional could be another ssd for cache/export. If the ssd scratch fails, it would be able to support.

  can take a look at the guides of storage here for more information.  Tweakers Page

• RV180 need some advice/Suggestion regarding the rules of access and Services

  Hi, I expected to get some advice or suggestion with a RV180 question.  I have a cable modem connection that connects to my port WAN RV180 and we have a single static IP address on the WAN port and everything works great.  We have an internal Exchange Server, so we have a few inbound rules access allowing for ports 443 and 25.  It all works.

  This is the question that I encounter.  We have now another service internal now needs outside inside access on port 443 (https), but I already have this configuration on the router for Exchange and when I have both sense, of course, it won't work correctly because the router just takes the first rules of access and use the one that works very well for traffic Exchange , but not my other service.

  Is there another way to get this job where I can have two internal services on port 443 and the router can forward traffic appropriate to each of them since my first IP? (it doesn't really matter if I had two IP addresses because it always hits the same access list for internal services)

  All advice or suggestion would be great

  Hi, yours is a general networking, not specific to RV180 problem.

  As you have only one IP public (on the WAN port), you only have a single port 443, you can support two services outside-to-inside.

  The cheapest solution is one of the services to another port, if the service permits.

  The most expensive solution is to have public IP addresses.

• book catalog error #1010, u can give me some advice please

  Hi, this is my .fla, some images of book file and catalogue xml with 6 pounds (2 for the political class, romance, and science)

  testing123. Pondi.hr/Books/Catalog.zip

  and you can download it to see and try.

  his simple book subject list dynamically file Ext. xml as you can see on

  http://testing123.Pondi.HR/books/index.html

  problem: when you click on the category on the right button, sometimes nothing happens, you have to click several times until you get result (list of books according to the corresponding category) and after that everything goes well, as you see... when publish you in flash and make this category button by clicking on, you can see error th output that says :

  TypeError: Error #1010: a term is undefined and has no properties.
  function / < anonymous >)
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::URLLoader/onComplete()

  PS: If anyone can give me some advice on this (img probbably charger difficulties) I would be so grateful and blessed

  THIS CODE from the EAST (I'm a bit new to this so have mercy with your comments ):

  Stop();
  flash.net import. *;
  import flash.events.EventDispatcher;
  Import fl.containers.UILoader;
  Import fl.containers.ScrollPane;
  import flash.display.MovieClip;
  import flash.display.Shape;
  import flash.events.MouseEvent;
  import flash.events.Event;

  var myScrollPane:ScrollPane = new ScrollPane();
  var arrUILoaders:Array = new Array();
  var fontStyleAlignL:TextFormat = new TextFormat();
  var fontStyleAlignR:TextFormat = new TextFormat();

  STYLE OF FONT FOR ALL PRICES (ALIGN = LEFT)
  fontStyleAlignL.size = 11;
  fontStyleAlignL.color = 0xAAAAAA;
  fontStyleAlignL.font = "Tahoma";

  FOR THE PRICE (ALIGN = RIGHT) FONT STYLE
  fontStyleAlignR.size = 11;
  fontStyleAlignR.color = 0xAAAAAA;
  fontStyleAlignR.font = "Tahoma";
  fontStyleAlignR.align = 'right ';

  politics_mc.addEventListener (MouseEvent.CLICK, workWantedCat);
  romance_mc.addEventListener (MouseEvent.CLICK, workWantedCat);
  science_mc.addEventListener (MouseEvent.CLICK, workWantedCat);

  function workWantedCat(event:MouseEvent):void {}
  
  myScrollPane.refreshPane ();
  
  var xPlacement:int = 10;
  var yPlacement:int = 0;
  var distance: int = 15;

  var wantedCat:String = "";

  Switch (event.target.name) {}
  case "politics_mc": wantedCat = "policy";        break;
  case "romance_mc": wantedCat = "romance";        break;
  case "science_mc": wantedCat = "Science";        break;
  }

  var myXML:XML;
  var url: URLRequest = new URLRequest ("catalog.xml");
  var loader: URLLoader = new URLLoader (url);
  loader.addEventListener (Event.COMPLETE, onLoadComplete);

  function onLoadComplete(event:Event):void {}
  
  var rowShape:Sprite = new Sprite();
  
  If {(loader.data)
  myXML = XML (loader.data);
  var books: XMLList = myXML.book;
  }

  for (var i: uint = 0; i < Books.length (); i ++) {}
  
  If (Books [i].category.toString () == wantedCat) {}
  
  FORM FOR EACH LINE OF THE BOOK
  rowShape.graphics.lineStyle (1, 0 x 333333);
  rowShape.graphics.drawRoundRect (xPlacement, yPlacement, 820, 15, 15, 15);
  
  SUPPORT FOR THE LEFT IMG THUMBNAIL
  var newUILoader:UILoader = new UILoader();
  arrUILoaders.push (newUILoader);
  arrUILoaders [i] .source = .photo books [i];
  arrUILoaders [i] .scaleContent = true;
  arrUILoaders [i] .setSize (12,12);
  arrUILoaders [i] .visible = true;
  arrUILoaders [i] .x = xPlacement + 4;
  arrUILoaders [i] there = yPlacement + 2;
  arrUILoaders [i] .buttonMode = true;
  arrUILoaders [i] .addEventListener (MouseEvent.MOUSE_OVER, ToolTip);
  
  TEXT FIELD FOR THE TITLE OF THE BOOK
  var titleField:TextField = new TextField();
  titleField.text = books [i]. Title;
  titleField.x = xPlacement + 20;
  titleField.y = yPlacement-1;
  titleField.selectable = true;
  titleField.wordWrap = false;
  titleField.setTextFormat (fontStyleAlignL);
  titleField.width = 250;
  titleField.height = 17;
  
  TEXT FIELD FOR THE AUTHOR OF THE BOOK
  var authorField:TextField = new TextField();
  authorField.text = .author books [i];
  authorField.x = xPlacement + 275;
  authorField.y = yPlacement-1;
  authorField.selectable = true;
  authorField.wordWrap = false;
  authorField.setTextFormat (fontStyleAlignL);
  authorField.width = 150;
  authorField.height = 17;
  
  TEXT FIELD FOR THE BOOK EDITOR
  var publisherField:TextField = new TextField();
  publisherField.text = .publisher [i] books;
  publisherField.x = xPlacement + 430;
  publisherField.y = yPlacement-1;
  publisherField.selectable = true;
  publisherField.wordWrap = false;
  publisherField.setTextFormat (fontStyleAlignL);
  publisherField.width = 125;
  publisherField.height = 17;
  
  TEXT FIELD FOR THE YEAR OF THE BOOK
  var yearField:TextField = new TextField();
  yearField.text = books [i]. Year;
  yearField.x = xPlacement + 560;
  yearField.y = yPlacement-1;
  yearField.selectable = true;
  yearField.wordWrap = false;
  yearField.setTextFormat (fontStyleAlignL);
  yearField.width = 50;
  yearField.height = 17;
  
  TEXT FIELD FOR THE COMMENT BOOK
  var commentField:TextField = new TextField();
  commentField.text = books [i]. Comment;
  commentField.x = xPlacement + 615;
  commentField.y = yPlacement-1;
  commentField.selectable = true;
  commentField.wordWrap = false;
  commentField.setTextFormat (fontStyleAlignL);
  commentField.width = 150;
  commentField.height = 17;
  
  TEXT FIELD FOR THE PRICE OF THE BOOK
  var priceField:TextField = new TextField();
  priceField.text = [i] books list;
  priceField.x = xPlacement + 770;
  priceField.y = yPlacement-1;
  priceField.selectable = true;
  priceField.wordWrap = false;
  priceField.setTextFormat (fontStyleAlignR);
  priceField.width = 50;
  priceField.height = 17;
  
  ADD TEXT FIELD CHILDS TO LINE SHAPE
  rowShape.addChild (arrUILoaders [i]);
  rowShape.addChild (titleField);
  rowShape.addChild (authorField);
  rowShape.addChild (publisherField);
  rowShape.addChild (yearField);
  rowShape.addChild (commentField);
  rowShape.addChild (priceField);
  
  SETTING LINES AND FIELDS TXT PLACEMENT
  yPlacement = yPlacement + distance;
  }
  }
  
  ROWSHAPE SETTING IN SCROLLPANE
  myScrollPane.source = rowShape;
  myScrollPane.setSize (865, 500);
  myScrollPane.move (30: 20);
  addChild (myScrollPane);
  }
  }

  FUNCTION OF THE TOOLTIP FOR IMG THUMBNAIL MOUSE_OVER
  var bookImg_tt:UILoader = new UILoader();
  function tooltip(event:MouseEvent):void {}
  var imgPath:String = event.currentTarget.source;
  bookImg_tt.enabled = true;
  bookImg_tt.source = imgPath;
  bookImg_tt.scaleContent = true;
  bookImg_tt.startDrag ();
  bookImg_tt.x = mouseX;
  bookImg_tt.y = mouseY;
  bookImg_tt.visible = true;
  event.currentTarget.addEventListener (MouseEvent.MOUSE_OUT, noTooltip);
  addChild (bookImg_tt);
  }
  
  WITHDRAWAL OF TOOLTIP FOR IMG THUMBNAIL MOUSE_OUT FUNCTION
  function noTooltip(event:MouseEvent):void {}
  bookImg_tt.enabled = false;
  bookImg_tt.source = "";
  bookImg_tt.visible = false;
  removeChild (bookImg_tt);
  }

  TNX A LOT

  The problem occurs when you move a series of books in the list and is located mainly between those lines...

  for (var i: uint = 0; i

  arrUILoaders.push (newUILoader);

  arrUILoaders [i] .source = .photo books [i];

  If you select the category romance everything first, the value of i is already 4 via the closure, when it is finally found, but because you push() shippers in the table, there is no arrUILoader [4]... There is only arrUILoader [0] as it was the first to be pressed.  If you change the line in bold to be...

  arrUILoaders [i] = newUILoader;

  You will have the UILoader your search code in all lines that target arrUILoaders [i] that follow.  Otherwise, using push(), you must target the last UILoader pushed, not one designated by I, which would mean that your table would grow whenever you choose a new category.

• [ADF, JDev12.1.3] (I need some advice on the 1) using panelHeader/box of 2) how achieve a specific layout

  Hallo,

  I create a page in which there are many 'af:form + af:table' groups (each group reads a VO istance).

  I would like to know if, in my case, I use it to group the CIU, panelBoxes or panelHeaders, and which of them would be advised.

  I would like that it is easy to install for all conatiners the same width.

  In addition, I would like to only 2 groups are always visible while others should be no in a space (just a panelGroupLayout?) with a vertical scroll bar.

  You could you kindly help me in achieving this layout?

  Thank you

  Federico

  

  PanelBox can be reduced by the user, well, can't panelHeader.

  As for scrolling, you can probably surround other sections with a panelGroupLayout and set layout = "scroll".

  Dario

• Need some advice FC...

  .. .wondering if someone can give me some advice on fiber channel.

  We are running two without: a former EMC NS20 and a new HDS. Both have CF, but only to systems meeting some, Lun most are iSCSI. We have two switches Cisco MDS 9148 for HA. We currently have a c7000 using iSCSI to one of our SAN systems, all the blades in this system are running ESX 4. I would add this c7000 CF, but I am interested in refurbed 4 Gb CF because we are more expansion of this system (we have an another c7000 using FlexFabric for newer blades).

  I've been searching online trying to figure out what that HBA and interconnection modules would be appropriate. I ran in the QLogic QMH2462 HBAs, Emulex LPe 1105 and I wonder who works more own with ESX 4 and would play well with our switches. I also met a few IC modules options: the "HP 4 GB Virtual Connect Fibre Channel Module" and the "Blade switch Cisco MDS 9124e.

  So I wonder if anyone has any advice what may work better in my configuration. And what experiences anyone could have a similar setup.

  Thank you

  -Mike

  ... QLogic QMH2462 and Emulex LPe 1105 HBA...

  IMO, you can use one of the HBA without problems. I've never had problems with QLogic or Emulex no matter if used in servers in rack or blades.

  ... the "HP 4 GB Virtual Connect Module Fibre Channel" and the "Blade switch Cisco MDS 9124e '...

  The Virtual Connect module is only an option for a C7000 with Virtual connect Ethernet IC modules. I did not work with Virtual Connect from this so far (with the exception of the HP ASE training). I mainly use the Brocade or Cisco IC. In your case, I'd probably go with the Cicso (from the perspective of management), since you already have the switches DMS 9148 in place. However, as you may know, HP and Cisco are not best friends more

  André

• How to make a text box in the scroll bar custom FlashCC HTML5 Canvas?

  Hello

  I need to make a scroll for a long text box bar. I wonder how can I achieve this with HTML5 canvas in Flash CC2014?

  Thank you

  Rodrigo

  No, the code is exactly the same except instead of changing the property y of a textfield object, you change the property y of a movieclip (which contains an image of the text your want to display).

• Need some advice/tutorials please.

  www.whiteoaknyc.com

  There are 2 things on this site that I would like to add to my site, but I have no idea how its done. The first thing that I like is the way in which the site scrolls. How it is not fixed, but kind of floats. How can I add on my website. Another thing I like is how the images are in a fixed position when you scroll past them. How can I make my site? My third question is how I can stretch a picture completely to the sides of my site? It seems that when I do muse in the image cut to the width of the site.

  Hello

  (1) you can use scrolling effects to achieve this.

  (2) you will have to pin the images so that they remain fixed even when the site scrolls

  (3) to have a full image width, you can use it as fill a rectangle and make this rectangle have a width of 100%

  Kind regards

  Neha

• I need some help please (I can not log in via customer web Vsphere Vcenter)

  Dear professionals

  as you can see in the photos attached, I can not connect on the web client via Vsphere vcenter server.

  should I use same ([email protected]) username and password that I used for SSO?

  I don't know exactly what username and password should I use.

  Please help me because I blocked at this point.

  Thank you very much

  naoufl

  Hello

  I can see on the screenshot that you misspelled the username administrator as Administratore, how ever the default Super powers are

  username: [email protected]

  Paswweord: master password of the SSO.

  Thank you

  Avinash

• Just bought Satellite C660 and need some information please

  I just bought a Toshiba Satellite C660 1 t 1 and have some important questions, I would like to meet you please. I have looked for answers, but could find nothing specific.

  The first question I have is that when I turned on my new laptop and installed Windows 7, I noticed he had partitioned my hard drive to 500 GB in two for a 232 GB C: Windows and a 232 GB data D:
  I was wondering if there was a setting that I had missed during my first installation of Windows 7 where I could change the size of the partition? As on a previous Samsung Netbook, I could choose how much space I wanted to a backup disk, but does not remember seeing a similar option on the Toshiba startup options? If someone could confirm it please that you can't change the size of the partition to installation of commissioning, it would be a relief, because I am worried, it was my fault the score is so great.

  The second I have is that when the driver updates are released to update my driver graphics and any other material, which is the best piece of software Toshiba I should use to find and update the material? As there seems to be a lot of them pre-installed and they seem to all updated software?

  The third question is: are there specific pieces of software toshiba which should start up when I start my PC? As I will try to stop programs unimportant all begin when starting my new laptop until reduced startup time.

  Finally (sorry for so many questions) someone could explain to me why its so important to create a "recovery disc" and why it seems that I must do this as soon as possible? I'm really not at all, or the importance to create one as soon as you get your new laptop.

  Thank you very much for all the help that I tried to find answers to these questions and noticed that everyone on these forums seems to be very competent and friendly :)

  Aaron Hello and welcome to Toshiba support forum

  At first, I must say that you are doing very good. It is best to ask first before you start to experiment and screw something up. A lot of people changing all implement and later wonder why some software stuff don t work anymore.

  I have a little experience with Toshiba and will try to help you. So let's go.
  > I was wondering if there was a setting that I had missed during my first installation of Windows 7 where I could change the size of the partition?
  When you start a laptop for the first time be preinstalled recovery image will install and you will have a laptop with factory settings. This HARD drive partitions are standard. After the first start the most important is to create recovery DVDs. After having done that, you can do with your computer laptop all you want. You can delete the partitions. Change the ability scores, install OS clean, but you will be able to install the original Toshiba recovery image using this disc. It is very important.

  Of course, you can install os using HDD Recovery mode - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
  In general, you can change the structure of the partitions but it may happen that there will be problems to start HARD drive recovery after doing this, but if you create recovery DVDs there is no problem for you.

  > The second I have, is that when the driver updates...
  In General, you should not install updates, especially not for Toshiba tools and utilities. My advice to you is: don change well equipped with operating system. What can you possibly update is display driver, but please use driver Toshiba only.

  > are there specific pieces of software Toshiba which should start up when I start my PC?
  Much preinstalled stuff slow startup and notebooks in general performance. So that you can disable some startup applications (MSCONFIG > startup) or even to remove them from the system. For example, you can remove Tempro, information tool product Toshiba, remove an application preinstalled antivirus and install something better like Avira Antivir. At startup, you can turn off the zooming utility, application, Adobe Reader, Google update, check laptop Toshiba webcam and so on. I turn off even more things and leave just more important tools.

  > could someone explain to me why its so important to create a "recovery disc" and why it seems that I must do this as soon as possible?
  I hope that I have answered this already, but here is the content of the Toshiba Recovery callback:

  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly on the hard disk (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  If you have any other questions you are welcome.

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• ID of product required for games for Windows Live. Need some answers, please.

  Well, it's more a question of both parties.

  1. How can I recover my product ID for a game, I bought and installed on Windows Live, if I lost the manual with the ID?

  2. If this is not possible, then why is it an obligation to enter the product ID to be able to save the game?

  If the answer is something like "privacy... mackmackmackmack. ", then of course, I get it - BUT...

  who are we, people who legitimately buy the game?

  you need to install some 3rd party games on windows live and demand the product ID... do you think that you should then be responsible for the maintenance of this record?

  in the case of a person suffering from ADHD like me loses their stupid & * ^ % Manual of the game $?

  Thanks in advance for not having answered with a legal presentation text preset on software piracy

  =)

  schmellyX

  To answer the question on the entry of the product key, which is to prevent piracy of software for most (let's call security if you wish).  To be honest, it is not for lack of Microsoft that you have lost the code.  I don't know any way to get it back (I have the Vista code if it was still installed on the system - but not for each installed software).  What is a Microsoft game?  I didn't know this applies to 3 rd party software are well - I'm a little surprised, but it is not quite incomprehensible.

  Here are the guidelines on the replacement of Microsoft software: http://support.microsoft.com/kb/326246/en-us.

  This forum is not Microsoft - but it is managed and maintained by Miccrosoft staff.  Complain here will do absolutely no good - the right people will never see it.

  I'm sorry, we can not be more help, but this information is not available or maintained, so there is nothing we can do to help.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.