Need space

Similar Questions

• Need space between buttons displayed on the same line

  Hello - I have 3 buttons html:
  
  Cancel
  query
  create
  
  They must be displayed on the same line, in the regions of button. (They're in)
  the lower-left corner of the page; right now I'm on the région #CREATE #.)
  
  The position of cancel and the query is fine... but I need space (approximately that of a button
  Worth) between query and create. Can not know how to do this.
  
  Ideas?
  
  Thank you
  Carol

  Hi Carol,.

  It might be interesting to look at model in your region under the shared components > models > region change the model.
  You should see the place holders of section definition for your buttons etc. #CREATE # CANCEL #. I suggest that you make a copy of the model and then play with it maybe just add another tag td which is empty.

  IF you need help with it just post your definition here and I'll try and help you.

• You want to remove iMessage conversation - need space

  I need to free up space on my 16 GB 5 s (ios 9.3.2) and there are more than 200 MB in my Messages folder.  This is due to particular iMessage conversations that I have not deleted because I need to keep.  I deleted all messages without importance and removed most of the media associated with the particular iMessage conversation, but still there is a lot of space.

  I save regularly via iTunes to Mac, import photos on the same mac and then delete media photos for free space.  The iCloud back up also updates daily (not sure if this backup imessages however).

  My question is this: iMessages are saved?   If I delete this conversation on my phone right?  I'll never be able to access it again?  If I restored the phone that they would return.   And finally, if I do a backup without these messages on the phone are they then gone also?

  I have to just print screen or copy/paste relevant messages (Notes or similar) and then delete?

  Appreciate advice.

  Thank you.

  The messages are saved.

  If you delete a message, then make a backup then the message went away.

• Storage of photos, external hard drive, Dropbox, need space

  Hi, I'm under the Photos to Mac and my computer has 120 GB. I have a lot of pictures and I also TAKE a lot of photos, and I ran out of space. So, I try to find a solution in the future. I'll write a short list of what I've tried so far and I'm subscribed to services, but I hope someone can help me create a system that works in the long term, especially so that my photos and videos are safe and I'll always have more than one backup.

  I have dropbox and download automatic camera, and I also have pictures of Google which stores the version not high resolution of all. I bought a large external hard drive today and copied my library of Photos on it, but now I think... If I connect my iPhone to my computer and it starts automatically upload all my pictures BUT my external hard drive is not connected... where are these pictures? A different photo library? How can I get the new additions on the hard drive?

  Dropbox is a solution? Just copy the entire photo library in dropbox? If so, make new additions in photos automatically the head of this dropbox folder? I have to keep this dropbox folder sync on my computer (in which case... There is not enough space on the hard drive...).

  In addition, the library of photos on the mac is 35 GB, but the mac is relatively new. My iPhotos library of before a 250 GB and I would like a way to combine all these old photos in a library of solid, but with only 120 GB on this computer, how can I manage consolidate all this?

  Finally, go ahead I intend to start using a camera DSLR and editing photos... what kind of storage solution/system I need? I think it would be awkward hanging around external hard drives with libraries on them?

  I hope that these issues are clear, and I would appreciate any input.

  Dropbox is a solution? Just copy the entire photo library in dropbox? If so, make new additions in photos automatically the head of this dropbox folder? I have to keep this dropbox folder sync on my computer (in which case... There is not enough space on the hard drive...).

  absolutely not - the photo library may not be on DropBox, as a library of operation or a backup - it may be local

  Basically, the answer is that if you want to use high-quality photos, you need a lot more storage Mac - 120 GB is tiny - if you want to make things interesting to improve your storage space

  You can use iCloud photo library with photos optimized on your computer, but can be slow to download and required Internet to make changes

  LN

• Need space to install Windows 7? I've got room, I don't?

  I am trying to install Windows 7 on Vista laptop for my daughter.

  The hard disk is partitioned into a C drive:

  79.6 GB used

  69.3 GB free

  and the D drive is partitioned as

  24.6 MB used

  6.38 MB of free space

  When I try to upgrade I get the following error

  There is not enough free space on the D: partition. A total of 15 megabytes of free space is required.

  When I look at the drive D with Windows Explorer it shows only 1 file called Bootsect.bak and he is 8 KB.

  What occupies the rest of the space?

  How can I enlarge Partition D so that I can install Windows 7?

  Rex

  Do not install Windows 7 on the D: drive - which is the recovery disk and is not big enough for Windows 7. It is best if you keep the D: drive is - don't mess with it unless it is intended to prevent the installation of Windows 7. Restore the disk files should be hidden if you do not see them.

  Install Windows 7 on drive C:. Sometimes, the program made the mistake to recommend the D: drive. Your C: drive drive has sufficient space for the installation of Windows 7, but if you make a room upgrade you may need to free up space.

  Windows 7 requires about 20 GB of free space for installation with a clean install, and even more if you make a way to upgrade. If you have a lot of music and/or videos you can transfer it to an external storage device during the upgrade.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Need space between the first name and family name

  Hi, I use Concat to join the first and last name, but I need a space between the two...

  Hello

  Try this concat (concat ('users'. "First name",""), 'Users' '. "" Family name")

  Kind regards
  Young

• CS6 upgrade need space I can uninstall CS5

  I just buy CS6 an update for CS5. I don't have enough space to download, can I uninstall CS5 before installing CS6?

  I'm worried that it won't let me download it because it's an upgrade?

  Yes, you can uninstall CS5 before downloading CS6. When installing CS6, you need the serial key of CS5. If you have, you can uninstall CS5 without any problem.

• Help - WARNING backup Icloud needs space

  Since the last update from my ipad to 9.3 I continually get the error that icloud doesn't have enough space for the backup of this device.  The problem is that there are 3.4 GB available on icloud so it shouldn't be a problem.  Is this a problem of Ios 9.3?

  Backup after ios issues 9

  Backups - troubleshooting IOS

• Need space for the test environment for windows server 2003 and sharepoint 2010 online

  Hello

  We are currently running in the locked-down environment and looking for an online service that would allow us to put in place about 4 servers Hyper-V or VM (2003) and implementation of SharePoint 2010 and SQL Server 2008 on them... Where EV may seek to purchase/rent the space for it?

  Thank you very much for your time and your answers!

  Hi Volodymyr G.

  I suggest you to search rental / purchase of space on the server.

• Simple if / choose block - I need spaces between fields

  Should be easy enough, but I just don't get it - perhaps someone can help you.
  I have to be able to see the first name Middle_Name name unless there is no middle name, then First_Name Last_Name. I can't just out the 3 fields in a row because it always turns an empty field in a space, leaving me with First_Name Last_Name (2 places).
  
  Here is the code that I use, you may have a better sugguestion. Problem is this First_NameLast_Name or First_NameMiddle_NameLast_Name code under outputs (without space)
  <? choose:? >
  <? When: MIDDLE_NAME! ='' ' ? >
  <? First_name? >
  <? MIDDLE_NAME? >
  <? Last_name? >
  <? end when? >
  <? otherwise:? >
  <? First_name? >
  <? Last_name? >
  <? end otherwise? >
  <? end to choose? >
  
  Thank you.
  PS - BI Publisher 11.1.1.5 using Word 2007

  You can use the concat function to include a space between the first name, last name etc.

  or try -essentially include a space between the fields.

  Hope that helps.
  Bipuser

• Using the data to merge to envelopes, but need space to close to 1 address line

  Hello

  I created a data document merged for the return address envelopes.

  Problem is, some in the source of the address data have 1 line address and some have 2 lines.

  I put the InDesign Document for both lines, but when an address has only 1 line, there is just a black space where the second line of the address would have shown there was data to greet him.

  Is there anyway to make this space close automatically, when no address line 2 is available?

  Thank you

  Babs

  iBabs2 wrote:

  Hello

  I created a data document merged for the return address envelopes.

  Problem is, some in the source of the address data have 1 line address and some have 2 lines.

  I put the InDesign Document for both lines, but when an address has only 1 line, there is just a black space where the second line of the address would have shown there was data to greet him.

  Is there anyway to make this space close automatically, when no address line 2 is available?

  Thank you

  Babs

  In the Options of investment content dialog box, there is a check box to remove blank lines for empty fields.

  HTH

  Kind regards

  Peter
  _______________________
  Peter gold
  Know-how ProServices

• Can T61 - I remove R &amp; R? -Need space

  
  
  

• I received an email with file/Attach. I clicked on, but Media Player does not work. I need space to show my problem.

  OK, when I clicked to read it, I got a pop up saying: Windows Media player is not installed correctly and must be reinstalled. You want to install the Player from the Microsoft Website? I clicked Yes and got this response: the Application or DLL C:\Windows\system32\dbghelp.dll is not a valid windows image. Please check this against your installation diskette.

  How can I solve the problem? Thank you.

  Simon

  Hi JehanleBrave,
   
  -You are able to play other files on your computer using Media Player without any problem?
   
  -What version of Media Player do you use?
   
  -A your Media Player works fine without any problems before?
   
  If the Media Player 11 that you're talking about, try to install the same by following the steps in the section "installation and removal of the drive" from the link below:
   
  File Readme for Windows Media Player 11 for Windows XP

• I need some space so I deleted some things, but now my laptop does not work

  Hey all really need quick help! my laptop needed space and I have deleted things I don't think I needed! now, it connects to the Internet can't not anything by windows, cannot update or reinstall because I can't online! really need sum assistance have either the windows disc, I also removed sum start things on laptop! I'm really not good with this kind of things tech but can't afford to get it looked at! can any1 help or have ideas like im lost!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________________

  or run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _____________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Need a script for wise vm file used and put into service space

  
  Hello

  In my env of customer, we have several file type of request. In each case, we have several virtual machines, including cluster virtual machines.

  We need space total get used and implemented for each folder.

  Thus the requirement is cluster disk must be calculated only once.  Please help me with this...

  -one

  I think a filter to get, maybe all the VM which appear as an RDM or shared vmdk and filter those out of the collection of Get - VM.

  Then add those together separately, combining the resemblance of the name of file maybe?  If you can run this Script of RDM, then I can see what the data might look like to adjust.  I have no RDM to play with on my end, unfortunately, all NFS these days.

  $report = @)

  $vms = get - VM | Name - descending sort. Get-View

  foreach ($vm to $vms)

  {

  foreach ($dev in $vm. Config.Hardware.Device)

  {

  If (($dev.)) GetType()). (Name - eq "VirtualDisk")

  {

  If (($dev.Backing.CompatibilityMode-eq "physicalMode") - or ($dev.Backing.CompatibilityMode - eq 'virtualMode'))

  {

  $row = "" | Select VMName, HDDeviceName, HDFileName, HDMode, HDSize

  $row. VMName = $vm. Name

  $row. HDDeviceName = $dev. Backing.DeviceName

  $row. HDFileName = $dev. Backing.FileName

  $row. HDMode = $dev.Backing.CompatibilityMode

  $row. HDSize = [math]: Round ((($ dev.)) CapacityInKB) / 1048576), 2)

  $report += $row

  }

  }

  }

  }