Need suggestion on creating the effect of discoloration of the listfield

Similar Questions

• Need Suggestion to validate the account by E-Mail

  Hello
  
  I make a request of registration process, where the user creates the account on the portal and to check the account in an email link will be sent to the mentioned email ID, there when the user clicks on the links account must is enabled.
  
  
  There is a table called CUSTOMER_ACCOUNTS was newly created user account, the data is stored the STATUS will be 'NEW '. Only after that the email is verified by clicking on the link sent in email must get changed to "VERIFIED".
  
  
  Please suggest me a URL link or when the user clicks on the link it must be enabled.
  
  Thank you
  Sudhir

  Perhaps generate an ID of great who is registered against the e-mail in your customer_accounts, then send them an email with a link to a public page that accepts the electronic ID/e-mail combo as a parameter and valid ID to the value so that the e-mail message in the table.

• Need help to create the calendar...

  I have a project, and in this project, I have a script.  However, when I go to create a calendar, the dialog box does not display my script.  Without a script, there is no way to create a schedule, so I'm stuck.  The sample project works as expected and I can see the scripts inside but Adobe Story does not see my script, when I created a new calendar.  My script is not well and I can access/modify if necessary but I can't create a schedule for it.  Would appreciate suggestions.

  ED

  Hello

  Schedules can be created scripts for Film or television. You must have permissions to modify the script (which, it seems, you have). My guess would be that you are trying to create the AV script planning or more columns. It is not possible currently.

  Kind regards

  Sunny

• need help to create the insert statement

  I have customer_priv of table which has 4 columns (login, privilize_id, adate, added_by)
  
  the stmt insert like "insert into customer_priv values('JDOE',951.sysdate,admin);
  
  I have 100 users and for each user, I need to add to the 15 privilize_id
  
  I have the list of connections and roles, what is the best way to create a massive insert for all those users statement and
  
  any help is very appreciated
  
  Thank you

  user11984714 wrote:
  Thanks Frank

  I get the below now.what Miss. Also is it possible to reel in a file insert rather directly the data.am I missing values?

  Sorry, I don't understand what you want.
  You say you want to write something in a HOLD file instead of insert? Of course, you can do it. Change the INSERT statement in a SELECT statement and add commands to the COIL.

  SQL > @c:\insert_many.sql
  33 old: SELECT ' & 1' priv_id, 'admin', sysdate)
  33 News: SELECT sysdate, "BNELSON", "admin", priv_id)

  Of all_priv_id
  *
  ERROR on line 34:
  ORA-00923: THE KEYWORD not found where expected
  Thank you

  Published by: user11984714 on August 9, 2010 18:40

  Sorry, there was a typing error in my previous post.
  Remove the ')' the end of the

  SELECT     '&1', privilze_id, SYSDATE, 'admin')
  

  I hope that you have more problems, but if you do, post your code, even if you think that you just copied it from this site.

• Hey once again, needing help to create this effect

  Hey guys, here's the thing: > I have 3 forms - 3 triangles that form a corner. I need to get an effect similar to the following image

  I did the left effect by gradient fill the 3 shapes, then stick to each, has chosen a new gradient, make the opacity for a new mask. Am not very happy with the result that they are not line up perfectly, suppose I could do a few more new forms on the top with different opacity masks to be closer to desired effect, but this procedure is very heavy and a lot of time. Wonder if this type of effect can be achieved with the NET tool? And if yes, if you are kind enough to illustrate how I can make work. Suppose that the mesh lines should resemble the following image. Great, it seems, it adds the new image on it the 1st one oh well: >

  

  Cannot follow your geometric description.

  My gradient must have powerful white with a soft fade at the base of each triangle.

  There is no way to determine from your drawing which side is "the base" of three arbitrary triangles. If you call the outsides - people not involved in the inner corner trying to make - the basics, then for all three gradients you must ensure that:

  • The direction of the gradient is perpendicular to the outer edge (not at the angle of a line between the center of that side and the corner opposite). Otherwise, on the side outside of the rectangle of the gradient will not be the same angle as the edge, I think what you call the "base".
  • The white end of the gradient should be at or to the inside of the outer edge, not beyond. It is fine if the dark end of the grad extends beyond the centre; Here's how you can get different on the three triangles of shading using a definition of Grad.

  It's the 3 white stripes interiors where the triangles intersect is in reality a fade, is not an alignment problem.

  1. Online tool: draw a line from the center of the corner of one of the outside corners. Repeat for the other edges of two 'corner '.
  2. Select these three lines. Give them a call of white, some weight you want.
  3. Object > path > OutlineStroke.
  4. Pathfinder palette: Apply the Add/tous United operation as a real path (and not as an effect). You STILL did not say which version you are using, which is necessary for the statement says.
  5. Now, you will have only one path closed, filled with white, with edges lined up to return the graded "strokes" that looks like you describe.
  6. Give this way a radial gradient.

  If you want these 'lines' to scroll, you can change the path in a 'three-pointed star"shape or create it by using the star tool. (Size exaggerated below for clarity).

  

  JET

• need help to create the exe in our test project

  We create a web test in VS2010, we need to know if there is a way that we can create an Exe from our test document (it's like a script something), so that other people can run it without using visual studio.please I would like to know how to do this. Thank you!

  Just a thought. Have you tried Iexpress by right click on the shortcut to the program or the .exe, and then selecting the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Have you tried a more specific Forum for help?

  Visual Studio forum
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

  http://www.Google.com.au/search?q=Visual+Studio+Forum&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = 8WYpUK79Mo-XiQfK7IGACQ

• Need help to create the shape that people have to go to a page

  Hello

  I am trying to create a form that people would have to complete and submit to access a specific page. The info they need to go to an e-mail address. Does anyone have the simplest solution for this? It should not be stored in a database simply go to an e-mail. Any help would be appreciated. I am not great with the backend of things.

  Thanks for getting back to me. What I have is a pricing page. The feedback form is so that we can see who views or interested in the services. We don't want people who fill out this form in order to see it. I created simple contact forms that are sent to an email and directed to another page. The problem I have is trying to find a way where I hope that if the same person comes back they will not have to fill out the form again. I don't know if they will fill and create a login/username that could be a possible solution, but I try to make it simple. I'm just starting to learn PHP/XML (which I copied from other sources) and wrote my own. Maybe create a cookie which is verified once the page is loaded? I don't know how do either if... I'm a front-end "designer" and much of this is Greek to me.

• Need help to create the package

  Table A
  Column1 Column2
  2B
  1 b
  3A
  4 B
  
  Table B (aggregate of table A)
  Column1 Column2
  A 3
  B 1
  
  Table C is new data for Table A and Table A.column1 = Table B.column1
  Column1 Column2
  1 C
  2 C
  3 C
  4 D
  
  I need to make a package that aggregates data in table C, update existing records in Table B, and insert records in Table B. The result should look like this:
  Table A
  Column1 Column2
  A 0 (3-3)
  B 0 (1-1)
  A q
  D 1

  Hello

  Assuming that the same id (like 'A', 'B',...) never occurs in table_b and table_c (which is the case in your test data):

  WITH     a_summary     AS
  (
       SELECT       column2     AS id
       ,       COUNT (*)     AS cnt
       FROM       table_a
       GROUP BY  column2
  )
  ,     b_c_summary     as
  (
       SELECT     column1          AS id
       ,     COLUMN2          AS cnt
       FROM     table_b
            --
      UNION ALL
            --
       SELECT    column2     AS id
       ,       COUNT (*)     AS cnt
       FROM       table_c
       GROUP BY  column2
  )
  SELECT     bc.id               AS column1
  ,     bc.cnt - NVL (a,cnt, 0)     AS column2
  FROM              b_c_summary  bc
  LEFT OUTER JOIN      a_summary    a          ON     bc.id     = a.id
  ;
  

  If there is an overlap between b and c, you have to change b_c_summary; It may involve a FULL OUTER JOIN instead of UNION all. If so, after a new series of sample data (CREATE TABLE and INSERT statements) and the results desired from these data.

  As Anurag said, you don't need a package or any kind of PL/SQL to get these results, but you can use a query like this in a package, if you want.

  Published by: Frank Kulash, December 10, 2009 10:46
  If you need to change table_b, you can use a query like this as a subquery in a MERGE statement, as Beijing says.

• Need help to create the logo graphic text saved as a PDF. (Beginner)

  I use Photoshop CC 2015.

  I want to create a logo using the part of a chart in a PDF (no copyright issues).

  The chart in PDF document looks like Word of the text with a rectangular colored background. I think the word was created with the help of a police and a couple of letters have been adjusted by the designer to make it better. I just want to use the word itself for my logo, but I don't know how to extract the information.

  Once I extracted the image I want to save it as an SVG file so I can use the Glyphter online services to convert it to a font that I can use the Apple Motion 5 for inclusion in an intro scene.

  Export as SVG option will work to allow me to use Glyphter?

  Guidance have really enjoyed.

  Hi there must be many ways to do this, including just draw your screenshot in Illustrator. If you are comfortable with the tool pen which is by far the most accurate way to do it, but its also very long. What I did was to use your perforated CAP and make a selection by using the magnetic lasso tool by using the default settings. This tool works very well for this kind of thing.

  

  Then in the palette drawn convert selection to path.

  

  What you have now is a quick alternative and dirty to the use of the pen tool. Indeed I had to change the path above

  with the pen tool to get the bend on some of the correct letters. Typographers spend days to address these

  forms so that they are fair, so, as you can see above the contours are not perfect, but it comes down to how

  a lot of time, you have to spend.

  Then, you convert the path to a selection. In Photoshop, go to select change smooth and use smoothing 2px

  in an attempt to get out of the irregular bumps or the strangeness of the track.

  Create a transparent layer and fill the section "" with black.

  With the layer selected, go to export as and select SVG and you will get a SVG file. I don't know if

  It works with the Glyphter, but I downloaded what I've done here, so you can try it for yourself.

  Checkin.svg - box

  Hope this works for you

  Terri

• Need help to create the sequential LIST of IP

  Dear friends...

  Please help meet the following requirement:

  Table IP_POOL

  USER NAME NOT NULL VARCHAR2 (30)

  STATIC_IP VARCHAR2 (4000)

  LASTOCT VARCHAR2 (4000)

  MASK VARCHAR2 (4000)

  NOFIP                                              NUMBER

  The sample lines

  username, static_ip, lastoct, mask, nofip

  insert into ip_pool values ('ABC@a', ' 10.56.16.0', '0', ' 29 ", 8);

  insert into ip_pool values ('DEF@a', ' 10.63.254.84', '84', '30', 4);

  Desired output:

  ABC@a, 10.56.16.0

  ABC@a, 10.56.16.1

  ABC@a, 10.56.16.2

  ABC@a, 10.56.16.3

  ABC@a, 10.56.16.0

  ABC@a, 10.56.16.0

  ABC@a, 10.56.16.0

  ABC@a, 10.56.16.0

  DEF@a, 10.63.254.84

  DEF@a, 10.63.254.85

  DEF@a, 10.63.254.86

  DEF@a, 10.63.254.87

  Thanks in advance please.

  Ashwin

  Try this

  Select the user name

  static_ip

  lastoct

  mask

  nofip

  regexp_replace (static_ip '(\.) [^.] *$', '\1' || TO_CHAR (lastoct + (level - 1))) new_static_ip

  of ip_pool

  connect

  by level<=>

  and prior username = username

  and prior sys_guid() is not null;

• Windows 7 creates the temporary user in sight? Help!

  I went through the VMware View Administrator's guide and configure my Windows 7 parent image as they recommended.  I created a vCenter Linked Clone together 60 workstations through the automated pool, and they are dedicated.  So when a user logs on for the first time, VMview should assign a desktop computer.

  Well when users access VMview for the first time, they receive a message saying "you have been connected with a temporary profile.  If you look in the profile system you see a 'temp' user profile and that's all.

  I have to create every single user on the image by default before you deploy on the desktop? I have the installation of image of parent with just the local administrator account and add the domain administrator account.  I thought that when the user logs on for the first time would create their profiles and life would be good.

  I need advice to create the user's profile... I tried with my information (im a domain administrator) and it does the same thing... Help!

  You can check under the HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and see if the SID for your profile is listed under there.  If it is delete and try to logout and login to see if you get the right profile.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Is it possible to create the text block with non-uniform formatting is applied to the text?

  Hi all

  By this script

  var doc = app.documents.add(70, 20, 300, "Test", NewDocumentMode.RGB);
  var textLayer = doc.artLayers.add();
  textLayer.name = "Text";
  textLayer.kind = LayerKind.TEXT;
  
  var solidColorRef = new SolidColor();
  solidColorRef.rgb.red = 0;
  solidColorRef.rgb.green = 174;
  solidColorRef.rgb.blue = 239;
  
  var ti = textLayer.textItem;
  with (ti) {
       contents = "Blah-blah-blah!";
       kind = TextType.PARAGRAPHTEXT;
       height = new UnitValue("20 mm");
       width = new UnitValue("70 mm");
       position = [ new UnitValue("0 mm"), new UnitValue("0 mm") ];
       font = "MinionPro-Bold";
       size = new UnitValue("24 pt");
       color = solidColorRef;
       justification = Justification.CENTER;
  }
  

  So I can create a block of text with uniform like formatting

  
  But, as far as I understand it, it is impossible to make an image and apply different sizes, colors, etc. (Please confirm or refute it).

  To achieve the result by script as follows:

  

  The r to Browse datashows the formatting only to the beginning of this text.

  
  What I want to achieve is to take a block of text in the InDesign document and re-create it in psd-file. (The text must be editable)

  Y at - it another way to achieve this: by plug-ins, extensions, incantation, etc.?

  Kind regards
  Kasyan

  So that other things I noticed, it's text.jsx does not work with UnitValues. It uses the action Manager to work with textRanges. And it seems that Adobe changed the textItem units operating. Therefore, it is difficult to understand what values to use. Text.addNewTextLayer () and Text.modifyTextLayer () seem to what different values for the text of the same size.

  So below is an example updated the PS-Scripts-post on how to create a text layer with different textRanges using the current text.jsx.Note I've hard-coded sizes for that to work as I had hoped.

  function tsrDemo(doc) {
       var doc = app.documents.add(new UnitValue(70,'mm'), new UnitValue(20,'mm'), 300, "Test", NewDocumentMode.RGB);
       // we want to create a new text layer so create a new TextOptions with the contents as the argument
        var opts = new TextOptions("Blah-blah-blah!");
         // override the default settings
         opts.layerName = "Test";
         opts.kind = TextType.PARAGRAPHTEXT;
         opts.height = 800;// pixels
         opts.width = 200;
         opts.position = [ 0, 0 ];// pixels
         opts.justification = Justification.CENTER;
         opts.font = Text.findFont("Minion Pro Bold");
         opts.size = 6;// not sure what unit this needs
         opts.color = Text.toRGBColor(0, 174, 239);
  
         // create a new text layer with those options
       var layer = Text.addNewTextLayer(doc, opts);
  
         var opts = new TextOptions( layer.textItem);
         opts.contents = layer.textItem.contents;
         // now need to construct TextStyles for each range we want to set
         // for ranges we can only change the font, size, and color
         // first set a textStyle that matches the TextOptions
        var s1 = new TextStyle(undefined,undefined,undefined);
         // now set a textStyle for each different style you want
        var s2 = new TextStyle(undefined, 12, Text.toRGBColor(0, 0,0));// for some reason size values here are not the same scale as above
         // define more TextStyles as needed. here we only need one
  
        // Now create the set of ranges to apply the styles over
        var ranges = new TextStyleRanges();
         // the first range must start at 0.  In this example we want the first range unchanged
         // so we use the TextStyle that matches the TextOptions
         // this range covers the entire contents
        ranges.add(new TextStyleRange(0, opts.contents.length, s1));
         // this range covers the middle 'blah'
         ranges.add(new TextStyleRange(5, 9, s2));
          // we now add the ranges we set to the TextOptions
        opts.ranges = ranges;
  
         Text.modifyTextLayer(doc, opts, doc.activeLayer); 
  
      };
  
      tsrDemo();
  

• Create the view with the CLOB of TABLE data type with the LONG data type

  Please need support to create the table view
  Source table: (itemid varchar2, longrec)
  need to create the table view Source
  (itemid varchar2, CLOBrec)

  A BUSINESS object must have a storage in the database, so you can't have a CLOB column in a view by pointing to a not lob data column.

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com/2010/01/17/supporto-di-xml-schema-in-oracle-xmldb/]

• Create the jdbc datasource and get database connection

  Hi all
  
  How can I create a jdbc data source in Jdeveloper Version 11.1.1.0.1? In the previous version of Jdeveloper when I create new database connection using the database browser he created xxxx-data - sources.xml in the application directory. I used following code to get the database connection.
  
  Fitting out = null;
  Context ic = new world;
  DataSource ds = (DataSource) ic.lookup (dataSource);
  connection = ds.getConnection ();
  
  But this method does not work in this version of jdeveloper. It creates no data-xxxx - sources.xm in the application directory. Please give me a suggestion to create the jdbc data source and to get a database connection in this version.
  The previous version of JDeveloper using OC4J, but this version using Weblogic.
  
  Thank you
  Sujnan
  
  Published by: sujnan on March 25, 2009 23:09

  Also add the data source in the web.xml file.
  
  JDBC/OracleDS
  javax.sql.DataSource
  Container
  

  InitialContext initialContext = new InitialContext();
  DataSource ds = (DataSource)
  initialContext.lookup("java:comp/env/jdbc/OracleDS");
  java.sql.Connection connection = ds.getConnection();
  

  Published by: Billett on March 25, 2009 12:08

• Need to create the Partition in the history table

  Hello

  I have an audit table that stores the data for the last 8 years in it and the customer wants to retain the data for the last 8 years. Now as adding data to this table is increasing, there is a delay in execution of report which are acquired by querying on this table.

  Basically, they go a from date and to date. Then these date are compared with two columns of dates in the table. The condition of the query will be as below

  TRUNC (NVL (DATE1, DATE2)) > = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  AND TRUNC (NVL (DATE1, DATE2)) < = TRUNC (TO_DATE (?, ' dd/mm/yyyy ""))

  Users can query for any date range.

  I am thinking of creating a Partition of the range on this table for each month during the 8 years of data. Please suggest on the question of whether I should use partition interval range to make it more effective. And would also create an Index on this partition for the above two day columns.

  12 (months) SO * 8 (years) = 98 would be created partitions. This will not overload the schema of database/Tablespace? Y at - it another effective way to set the table.

  Please suggest and let me know for any clarification.

  There are 2 approaches (but not limited to 2) to create the Partition on an existing table:

  Note: There is no ALTER TABLE statement to convert a heap table to a partitioned table.

  1. create a temporary Partitioned table with the same types of data in the column. Take a dump of the original table (HEAP) export and import the dump into the newly created partitioned intermediate table. After checking the data file the original and rename the interim even as the original table.

  2 using the package Oracle DBMS_REDEFINITION automates the steps above from said (not exactly the same steps, however) and its done online - which means there is no required downtime, the original table may undergo DML operations during this process of redefinition. View partitioning of a table online with DBMS_REDEFINITION | Oracle instructor

  According to my understanding if let us know as a partition interval then in April if there is an inserted record then it will create a new partition for the month of April will be of value less than 30 April 2014 "and all other documents created in April will pass under it"

  Yes, it's a feature of 11g, which Oracle manages adding partitions as needed. In earlier versions DBA can add partitions manually from time to time. Reference www.gavinsoorma.com/2009/09/11g-interval-partitioning/

  Here the reason for check the sent_out_datetime NVL will be NULL for few records, so in this case we want to get the records for dates of mapping them to received_datetime

  In addition, try to replace the NVL with COALESCE and test it. This would help improve performance.