need to be re-issued missing links to the files with the extensions

Similar Questions

• Missing links despite the restoration of links

  Hello

  I faced a problem with missing links. I checked the tutorials that deal with this problem and I have relinked the image in my indesign to the folder in which the original image I.

  However, this doesn't seem to work. following screenshot:

  

  I'd appreciate any help.

  Thank you

  Maybe it's just the preview screen

  Try view > display performance > high quality display

  Check also that the effective PPI of the image shows in your links Panel.

• Missing link on the PB

  Whenever I open a document created by another person, based on a model she inherited, the missing links, dialog box appears indicating an image on the PB is no longer tied. I have tried everything I can think of expand PB and looking image, but nothing helped. Even looking at the image, it is not an image, I recognize any publication created from this original model. Any ideas? Is there a way to simply remove the picture in the window?

  Are all visible layers and have you looked on the master page?

• Missing link in the file write Key.vi LabView after switching LV development system server to RTE

  Hello

  TS4.2 LV8.6.1

  I have a strange behavior of TS. All of the code works well under the development system. But when I pass the server of LabView runtime LabVIEW development system then, during the call one of my screws (action step calling the LV adapter), I have the window 'vi search' open looking for the Key.vi to write (one of the interns LV VI). Finally, is the write file Key.vi and TS is happy, however, I don't want it to happen on the production floor.

  Is this a bug or I have some sort of option or something?

  Why this does not happen under the development environment? What is the mechanism?

  K.

  (1) more complex nodes in LabVIEW are stored in vi.lib.  This is not uncommon.  Are not only very basic items (add, subtract, table functions, etc...).  They are usually yellow and you can not open them.

  (2) they need to go somewhere, and vi.lib is the standard location for all built-in screws

  (3) instr.lib is very similar to vi.lib, just a different location.  LabVIEW stores a relative path for the screws here called in.  This path does not exist with the runtime, although TestStand will add it in the search directories if you installed LabVIEW Development.

  (4) if it is possible to use LabVIEW to do this, there are more ways to get into trouble, because doing it this way would never update your sequence or find problems that would be specific to TestStand.  Is there a reason why you don't want to use the TestStand deployment utility?  Behind the scenes, TestStand calls in the same frame as LabVIEW for the deployment, but do it with more knowledge that LabVIEW alone would have.  This can be done, but there are more considerations, and you can meet potential problems.  Unless you have a good reason for this, it is generally not advisable.

  I recommend reading the chapter on deployment in the handbook here (Chapter 14):

  http://www.NI.com/PDF/manuals/373435d.PDF

• Domain change, deleted Local System account user. Need to c:\users\name a link to the new account 'user '.

  Help please!

  My main user account is corrupted somehow.  When I try and sign it immediately disconnects.  It is after some user account problems...

  History:

  I changed my phone from a domain to a Local computer.  This deleted my domain user account, but my files etc. are still in C:\Users\myaccountname.

  I followed the instructions here to Frederik Long:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/missing-user-accounts-after-Windows-7-restore/64c93151-dc6d-40FA-a9de-3356336f8f81

  This re-creates the user account, but it won't log in now. When I try and login it debits and then disconnects.

  Specifications of the system.

  -Lenovo T410

  -Version 6.1.7601 SP1 Build 7601 Win7Pro

  -Most up-to-date drivers

  Many would prove defective in Event Viewer... tried to fix a few elements such as Task Scheduler still having the old "Domain\myaccountname" domain as a user account to be used for several tasks, but I am now ideas.

  No point system restore not reported by system restore (unlikely, given that I remember many being created relatively recently), but maybe it's because I'm logged into a user account Admin backup.

  Any suggestions or ideas appreciated.

  Hello

  Thanks for posting your question on the Forum of the Microsoft community.

  Given that your problem is a domain account, governed by different group policies, he needs to have checked whether administrative privileges have completely been provided to the local user. I would recommend so post your query in the TechNet Forums for best expertise on this issue.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps

• Missing link to the desktop icon

  The network link is missing from my icon. The message: the link is not available when I double click the icon.

  Hello

  · Are what program or application icon you referring?

  · What is the exact error message or the error code that you receive?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Recreate the icon of the program office and check if it helps.

  For reference: to add a desktop icon: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_desktop_icons_remove.mspx?mfr=true

• E.M.P. 11122 to 11123 issue update: links in the workspace do not work

  Hi John & all,

  We have an existing EMP 11.1.2.2 installed on the platforms Linux and windows. It is a planning & field HFR. Except FDM, server size, HFR other services do not include Linux server.

  Linux - ServerA (physical server). However, we access all URLS using a DNS alias different ServerC that points to the server has

  Windows - Server b

  Monitoring http://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?ch10s05.html for the update.

  Installation and configuration went well. We use an integrated http server. In the last step of the web server configuration

  
  

  -Do you have the web server configured with Embedded (port 28080). He managed.

  -Then WL console has changed the address of listening to ServerC for all managed servers including the administration server

  -Then using configtool ran step "configure logical web addresses.

  - Chosen together here logical addresses for services individually and then for all the services running on the server

  (space of work/shared services/aif/aps/datasync/planning/eas/calc)

  implement ServerC:28080 (DNS alias)
  

  
  

  And for the services that run on Windows BPMA & ServerB:80 FDM

  This went by Wells.

  
  

  All services started. All services of WL came without problems. Can connect you to the workspace and shared services. I can see changes in the appearance and can see all the new EPM 11123 icons under "Navigate-> administer". But when I click on one of the links (Dimension lib, lib, planning, data application etc.) all fail with a similar error

  "A not found no error occurred during communication with the server. See the form it says for example...

  
  

  "

  URI: http://ServerC:28080/AWB/conf/AwbConfig.XML ' -status 404 not found "

  For each application, the error is similar http://ServerC:28080 / < frame > - status 404 not found

  Of course the logical address set to 28080 does not work. But all the below URL work very well

  http://serverC:9365/aps/APS

  http://serverC:8300/HyperionPlanning/conf/HspJSConfig.XML

  http://serverC:19091/AWB/conf/AwbConfig.XML

  http://serverC:8500/calcmgr/conf/CalcMgrConfig.XML

  http://serverC:19091/AWB/conf/AwbConfig.XML

  http://serverC:28080 / workspace

  To resolve this problem, tried to reconfigure the logical address to all individual applications, this time of good respective ports where they are listening instead of 28080. I can see only workspace works at 28080.

  I see this new configuration, update the registry. Bounced A including the administration server. But the problem persists. For each link, he is always looking for old logic web URL "http:serverc:28080/ < frame > rather than seek new logical addresses configured.

  Please suggest how to solve the problem.

  Regards

  VARA

  Raphael
  

  
  

  Issue solved after installation of SST instead of using the built-in http server. In OHA, he gives the flexibility to point to the DNS alias.

• I need to place a series of links to the same scale.

  I'm working on a project where I need to make many links of varying dimensions (Illustrator files in this case) in InDesign to the same scale so that they are proportional to the other.

  I took picture with living legends attached blocks and ideally would like to wear each link to 5%, then mount the box to the content (cmnd + alt + C). Is this possible?

  To travelled many kilometres to keep going adjuting and menu bar percentage!

  OK worked the entire solution. (Mac OS 10.5.8 Indesign CS4 6.0.6)

  I was partly right with my posts except there is an option, you need to change in the Panel of the preferences > General

  During the measurement

  Adjust the percentage of the chosen scale

  Draw your box and resize it by your percentage required using scale X percentage and scale Y percentage

  Resize the box the size of departure chosen and he said it's a chart right click area > Content > graph

  Make a dup of the box maybe even put it in a file library for easy access.

  Use the Place command to put an image in the box and they will appear as the percentage reduction you need.

  Have fun

• V560 missing link on the tab search product

  Hello

  I noticed this lack of link V560 when we are looking for prodcut pilots. Please refer to the below captured image.

  

  Hi OKR-MAN,.

  You can find Lenovo V Series portable computer products.

  Kind regards.

• issue of link for the instrument panel vfog 6.8

  Hello

  I create a new dashboard and I share the link portal but it takes 4 hours of data by default. I want the default to 7 days. How can I change this to all profiles?

  Thank you!!!

  Scott.

  Each user gets to choose their own default timeRange.

  Theoretically, a script could be possible, using the api user, but it is quite deep in the code.  And, as soon as someone changes their timeRange for other purposes, it would change for this dashboard as well.

  That said, you can write a screen and assign a different time timeRange in additional context, such as the last 7 days, but computers will be defined like that for everyone who uses the dashboard.

• Join itself find missing links, helps the query, table

  Data in the table:
  

  tblRelationships
  RelationshipID    SourceID   DestinationID
  1                      100          200
  2                      200          100
  3                      300          100

  I'm trying to right a query that returns the relationships that are the only way.
  
  So for the above data, 3 would return because he'll only source 300 to 100 and not source from 100 to 300.
  
  Published by: avalanche333 on January 15, 2010 12:26

  SQL> create table tblRelationships (
    2  RelationshipID       NUMBER,
    3  SourceID     NUMBER,
    4  DestinationID NUMBER)
    5  /
  
  Table created.
  
  SQL> insert into tblRelationships values (1,100,200);
  
  1 row created.
  
  SQL> insert into tblRelationships values (2,200,100);
  
  1 row created.
  
  SQL> insert into tblRelationships values (3,300,100);
  
  1 row created.
  
  SQL>
  SQL> select relationshipid from tblrelationships
    2  where sourceid in (
    3  select SourceID from tblRelationships
    4  minus
    5  select destinationid from tblRelationships)
    6  /
  
  RELATIONSHIPID
  --------------
            3
  
  SQL> drop table tblRelationships
    2  /
  
  Table dropped.
  
  SQL> 
  

• Missing links in InDesign Cs4

  SO I read around this forum and have not found the answer I'm looking for.

  I'm not very familiar with InDesign. Ultimatly someone made a Web page for us and I want to be able to transfer it to Dreamweaver... which I am very familiar with.

  I have already designed file. All the files are on the local computer.

  When I open the file, it comes to getting the error message:

  

  This Document contains 19 missing links to sources that are missing. You can find or reedit the missing links using the links Panel.

  My question is this:

  (1) is there a way to identify which links are missing?

  (2) where the links Panel in the menu bar?

  Thanks for your help and your Patience.

  I have to admit, I'm very much a frame with InDesign

  The names of the missing links appears in the links Panel, you will find by window > links.

  If you really do not have the files, you will need to select in the links Panel and repeat, leader ID to the correct location.

• Library CC items disappear during the PDF conversion + missing links

  I created an InDesign document, and I transferred artworks, which is available on my local PC in a CC library dedicated to the project that I have 2 or 3 different sizes posters designed for the same project.

  Everything seems fine, until I have try to re - open documents where it is suddenly said that:

  "This document contains 14 links to sources that are missing.  You can find or reedit the missing links using the links Panel. »

  So, I 'OK' cela and shows me my paper and lo-and-behold, the missing link in sources are all displayed AND are all in my CC library for the project.

  Except that when I export the document to PDF, so I can send it to my printer, the elements are all absent and is replaced by a blank square!

  Aaarrggghh!  I've spent a lot of money on this software exactly prevent shit stupid, silly, like what is happening and yet there it is again with the same old nonsense IT inexplicable that does nothing but make me want to move to the forest and a whittler of spoon.

  Is this a known bug, how can I fix it and

  I use WIndows 10 and have all the updates that are installed for InDesign and CC library.

  Thank you for any advice or assistance.  I'd appreciate it really, because as it is, the software is useless at the moment.

  NJ

  The answer to this question is detailed here:

  Re: Is the file does not exist, you may not — the file may be in use.

  Thanks to Steve for the solution.
  Concerning
  NJ

• Is no longer able to follow links to local files.

  In previous versions of firefox (28 and earlier) I was able to follow the links of local file with white list in the preferences of the user of the file as described here: http://kb.mozillazine.org/Links_to_local_pages_do_not_work

  This feature has stopped working with the update.

  Update of information added by a moderator of the forum

  I Note
  

  In order to meet the demands of the business users, the localfilelinks policy has been restored with Firefox 30. This allows users to follow links on a webpage (http:// or https://) local filesystem (file:///) especially on the company's internal applications. For now, Firefox Beta or the extension of fileuri caps created by a developer of Mozilla can be used to get around this restriction.

  mentions caps-fileuri extension, but this seems to have been deleted. Is no longer in https://addons.mozilla.org/firefox/addon/caps-fileuri/ (original can be https://bugzilla.mozilla.org/attachment.cgi?id=8415447 )

  Also note that a question perhaps is currently open

  • Where will be the issue of local links fixed? / issues/1066709

  The prefs ' ability ' breakup is bug 995943.

  Bobby Holley is working on an extension of this bug which could solve the problem.

• Link between swf files.

  Hello. I need to find a way to link several .swf files, so I can have a menu and after clicking on a button to go from there to any file swf and return. But I need something that works in AS 2 and 3 because my files are located in the two ActionScripts. It shouldn't be a problem, right? Ive been looking and trying different things, but I can't do it.

  I hope someone can help

  Thank you.

  If this code works then it is probably on the right track to run multiple files.  View the code the try which produces an error and the error as well.