Satellite A300-1ID - no display after the update of the BIOS

Similar Questions

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite A210 PSAFGE - no display after the update of the BIOS

  Hello!!

  I have Toshiba A210 PSAFGE. I have download BIOS OS from Vista to Xp and flashing.
  When I tried to upgrade the BIOS setting, the system frozed.

  I reformulated the system using the power button.
  There is no display on my screen when restarting.
  I tried to restart by pressing F1, F2 and even removed the battery, adapter for a while, until what there is no display on my screen.

  I even tried connection and an external monitor, but that also there is no display.
  At the moment I don't have any sort of recovery disk.

  I would be very happy if someone could help me.

  Boyfriend... You should not have put off your system by updating the bios...

  Closest contact center toshiba to recover such problems...

  Sul

• Satellite A200 PSAE0E - no display after the update of the BIOS has not

  Hi all

  I have Toshiba A200 PSAE0E. I got the Vista OS to Xp.
  When I tried to upgrade the BIOS setting, the system frozed.

  I reformulated the system using the power button. There is no display on my screen when restarting.
  I tried to restart by pressing F1, F2, key to the House and even removed the battery for a while, until what there is no display on my screen.

  I even tried connection and an external monitor, but that also there is no display.
  At the moment I don't have any sort of recovery disk.

  I would be very happy if someone could help me.

  Hello

  To me, it seems that the BIOS update procedure has failed.
  For no apparent reason has frozen the system and you have interrupted the update procedure.

  According to mu ROM module (where the BIOS is stored) has not been flashed properly and this is the reason why you cannot start the laptop.

  In this case, you need the help of ASP I know, this really stupid s situation but I'm afraid there is no alternative to m.

  I think that the technician will try to flash the ROM module using a special BIOS and then the cell phone should start properly if all goes well. I'll keep my fingers crossed for you.

  Good luck

• Re: satellite A300 screen turns off after the toshiba logo, will not boot from the CD/DVD

  Hello, I have this problem with Toshiba satellite A300.

  I deleted several files and folders of my drives C and E. To restart the computer, it only shows the Toshiba logo then a slightly gray white screen on a thorough inspection. Whenever I press CRL + ALT + DELETE, the computer restarts and behaves in the same way.

  I tried to use an external monitor, but there is no difference. The tent to start using a CD/DVD, same behaviour occurs, it does not start and screen remains blank after the Toshiba logo, I tried even to change g the order of boot, but in vain.

  What could happen?
  Thanks in advance.

  Hello

  It seems that you deleted system files and Windows no longer starts. Have you tried to restore the disk image factory settings or hard drive recovery? Or do copy the Windows installation... It is easier to reinstall rather fix the problem.

• Satellite A300 does not start after the installation of the anti-virus

  Hello

  I brought a Satellite A300 today and loaded it up and it was fine.
  I uninstalled the google toolbar, office and land it came preinstalled with also the mcafree anti virus.
  So I could install my own anti virus.

  After that the system asked me to restart my pc I did.
  Since then, the system cross the 'Please wait' screen
  But it won't let me boot into safe mode. I tried a system restore.

  Any ideas?

  Hello

  To me, it seems that you 3rd party antivirus software caused this strange and confusing problem the Vista OS installed.

  In my eyes a simply, new installation of operating system using the Toshiba Recovery disk would solve this problem.

  If you are able to start the operating system in safe mode and then try to remove your installed Antivirus software, then clean the registry and operating system using the free tool called CCLeaner and try to start the laptop again.

  Maybe it helps you too

• Satellite A300: Vista 64 bits after the new installation by using the recovery disk

  I have a Toshiba Satellite A300 A300 / M00 and when I got it, it had Windows Vista Home Premium 32 Bit. But after awhile, I started to have problems so I decided to reinstall Vista on my laptop. After crossing with the product recovery media, my system become so 64-bit.

  Was not my system suppose to have 32-bit when it was originally with her?
  If no, then how can I install 32 bit once more on my laptop like 64-bit gives me problems with the installation of some of my programs.

  If I need to buy a copy of Vista 32 Bit, where can I find the drivers for my system, because the product recovery media has all the drivers on this subject.

  Thank you for your time.

  Hmm. Your ad is a little confusing.

  Why would you say that Toshiba Recovery disk contains a version of Vista 64-bit?
  How did you check that?
  From my experience, the Toshiba recovery disc still contains the preinstalled operating system.

  Also as much as I know the new notebook from Toshiba are not delivered with the recovery disk, but with a HARD drive recovery option.
  This option allows you to reinstall the OS from the second partition of HARD drive recovery.
  Alternatively, you can use the preinstalled Toshiba recovery disc creator software to create the own recovery DVDs! And this recovery disk contains the same preinstalled OS!

  Good bye

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Ports Satellite A135 - S2306 defective USB after the BIOS update.

  OK, I searched all over the internet and not found anyone else with this same problem, or anyone with a solution that worked for me.

  A few weeks ago, I had the common error of the BIOS reset itself and asking for a password at startup. I took my local Toshiba authorized repair center, and they have not taken care of him, no problem.

  Since the resume, however, all 4 of my USB ports have been going crazy. What happened in the following three steps (in order):
  -One of the ports does not work at all, won't provide any current or even recognize that nothing is connected.
  -The 3 remaining ports are now only recognized as USB 1.1 ports, not USB 2.0 as they were before.
  -Now, only a very small number of my devices is not at all, with three USB mouse and two unrecognized hard drives work (I get the error message "USB device not recognized" standard Windows when I connect them to one of the three ports).
  I am running Vista Home Basic (32 bit) with SP 2 and the new version of the BIOS is v1.60.

  Is this something people of repair caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  The old Duke

  Hello

  > What is the repair people caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  It is not easy to say. I think that would be best to ask guys why it happens or what they have done in the past.
  But have you set the default BIOS?
  Please do; access the BIOS (by pressing F2). Set it to default by pressing F9 (I guess) and save the changes. Restart the unit.
  Access the Device Manager, and then remove all hubs USB and commands from the list of devices. After that reboot the device again. Windows should recognize the devices deleted again.

• Satellite L30 does not start after the BIOS update

  Hello

  I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

  Help, please...

  Hi Scott,.

  Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

  Kind regards

• Satellite L300D - does not load after the BIOS update

  I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

  There is no lights & there is no noise from the laptop at all.

  Can any ideas on how I fix?

  The laptop is a Toshiba Satellite L300D

  Hello

  Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

  Then please contact the nearest service Toshiba and ask for help :)

• Satellite A100 does not start after the BIOS update

  Hello

  I downloaded the update to the bios toshiba A100 PSAA8 on the toshiba site and applied using the procedure of updating the bios from windows XP MSE. Restart after the start of the update stopped at the toshiba start screen.

  At startup the screen by pressing ESC watch text mode. The message indicated it confirms the update of the bios version. POST messages are:

  _________________________
  Genuine Intel CPU
  No TPM or TPM has problem
  1015 M system RAM passed

  Press to enter in SETUP
  _________________________

  Pressing F2 just clears the last message in line and then no change is found.

  The laptop comes with windows XP media center edition. I don't know why the TPM secure is enabled. It is possible that toshiba is available with the module of TPM enabled in bios updates that logbook. If this is the case, they must clearly identified as 'not applicable' upgrade for machines that are not relevant.

  I found similar messages around the forum without convincing answer.

  Is it possible to fix this without sending? Even if it turns out to be affordable, it make much sense to pay for the problems caused by toshiba.

  Hello

  Please don t blame someone for you mistakes ;)
  As far as I know that only a few sets of laptops come with TPM.
  If you want to do an update of the BIOS on the models at TPM, you will need to contact the ASP!

  Looks like you used a bad BIOS or bad BIOS update procedure.

  The Toshiba page a BISO update the documentation that describes how to upgrade the BIOS on each series laptop!
  You will find on the page of the Toshiba driver compatible BIOS and information over a large number of details!

  > Is it possible to fix this without sending
  Don t think so, and therefore, you will need to contact the Asp help!

  Good luck

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.