Need to create the directory (folder) using phonegap (mobile jquery)

Similar Questions

• Unable to create the new folder using Vista Home Premium 32-bit.

  It is on a Toshiba laptop which is about five years old.

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  About any what Explorer windows Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete then Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  Press Ctrl + Alt + Delete and choose Task Manager from the Task Manager click the menu file then the new task (run) , type explore

   

  If you cannot start the Explorer at all

  Press Ctrl + Alt + Delete and choose Task Manager on the processes tab, click Show processes from all users to elevate to administrator in Task Manager, click the file menu then the new task (run) and type cmd other things you can try typing

  Explorer
  Explorer c:\
  Explorer/e, c:\
  wercon
  control
  Iexplore

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll

   

  Delete folder settings

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx close the windows Explorer Start Autoruns by right-clicking and choose run as administrator , click Options menu - Filter Options and check hide Microsoft entries and claire include empty slots to go to the Explorer tab and uncheck everything to the left. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list. Click the file menu and then click new task (run) and enter explorer

  If it helps, re-enable one by one to identify the who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  RD C:\$RECYCLE. BIN/s/q
   
  then repeat for each drive to change the drive letter, for example
   
  d:\$recycle Rd. BIN/s/q
   
  e:\$recycle Rd. BIN/s/q
   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  MD "% userprofile%\DesktopTest".
   
  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest"
   
  MD "% public%\desktopTest".
   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\DesktopTest".

   

  To restore default after having tested if begins to explore.

   

  identifying add / REG_EXPAND_SZ /d "% USERPROFILE%\Desktop" office t/v 'HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders ".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\Desktop".

   

  You will need to disconnect then.

   

   

  Type in a command prompt

   

  Reg query HKEY_CLASSES_ROOT\Folder\ShellNew/s

   

  and paste the results here.

• Unable to create the new folder. Jaymze

  Windows 7 Edition home premium 64-bit

  I need to create the new folder for recording of images and music files but when I click on "NEW FOLDER" nothing happens.  When I right click on the desktop in the drop top NEW is there but still once, nothing happens.

  Jaymze

  You have installed chrome? It's looking like a recent update of chromium may be the cause. Here are two patches.
   
  
  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html
   
   
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a
   
   
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.
   
   

• create the policy by using the API of the IOM: tcAPIException:insert exception failed

  Hello
  
  I need to create the policy by using the API of the IOM.
  
  Here is my code:
  
  long [] provObjKeys is {10};.
  Boolean [] revokeObjectIfNotApply = {true};
  long [] denyObjKeys is {11};.
  long [] groupKeys is {6};.
  tcAccessPolicyOperationsIntf accessPolicyOp = (tcAccessPolicyOperationsIntf) ioUtilityFactory.getUtility ("Thor.API.Operations.tcAccessPolicyOperationsIntf");
  
  HashMap policyCriteriaMap = new HashMap();
  policyCriteriaMap.put ("Access Policies.Name", "computer laptop Access Policy");
  policyCriteriaMap.put ("Access Policies.Description", "computer laptop access political Desc");
  policyCriteriaMap.put ("Access Policies.Note", "computer laptop Access Policy Note");
  policyCriteriaMap.put ('Access Policies.Retrofit Flag', ' yes');
  policyCriteriaMap.put ("Access Policies.By Request", "No");
  
  long accessPolicyKey = accessPolicyOp.createAccessPolicy (policyCriteriaMap, provObjKeys, revokeObjectIfNotApply, denyObjKeys, groupKeys);
  
  but the political establishment fails.
  
  Not able to discover the problem.

  policyCriteriaMap.put ("Access Policies.Retrofit Flag", "1");
  policyCriteriaMap.put ("Policies.By application access","0");

• Create the directory of procedure to aid directory with path parameter name

  Hello
  I've written a procedure that takes name (C:\temp) to a directory as a parameter and creates the directory oracle using EXECUTE IMMEDIATE of the procedure. Proc compiled fine but when I try to run it (exec prc_lx_e_m_fund_activty ("C:\interface','test1.txt','20040102"), I get the following error with the execute immediate statement below.
  
  create or replace
  PROCEDURE prc_lx_e_m_fund_activty
  (
  i_output_dir IN VARCHAR2,
  i_output_file_name IN VARCHAR2,
  i_interface_date in VARCHAR2
  )
  AS
  .
  .
  .
  .
  RUN IMMEDIATELY 'CREATE OR REPLACE DIRECTORY OUTPUT_PATH AS | ''''|| i_output_dir | " ' || « ; » ; -Where i_output_dir = C:\temp (I'm passing this parameter as IN)
  .
  .
  .
  END
  
  
  ORA-01481: invalid number format model
  ORA-06512: at "DBO." " PRC_LX_E_M_FUND_ACTIVTY', line 326
  ORA-00911: invalid character
  ORA-06512: at line 10
  Process is complete.
  
  Kind regards
  Mason.

  Try this

  SQL> ed
  Wrote file afiedt.buf
  
    1  create or replace
    2  PROCEDURE prc_lx_e_m_fund_activty
    3  (
    4  i_output_dir IN VARCHAR2,
    5  i_output_file_name IN VARCHAR2,
    6  i_interface_date IN VARCHAR2
    7  )
    8  AS
    9  begin
   10  EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY OUTPUT_PATH AS '|| i_output_dir ;
   11* END;
   12  /
  
  Procedure created.
  
  SQL> exec prc_lx_e_m_fund_activty('''c:\temp''','aa','bb');
  
  PL/SQL procedure successfully completed.
  
  SQL>
  SQL> SET LINES 10000
  SQL> SELECT * FROM ALL_DIRECTORIES;
  
  OWNER                          DIRECTORY_NAME                 DIRECTORY_PATH
  ------------------------------ ------------------------------ ----------------------
  SYS                            OUTPUT_PATH                    c:\temp
  

• Button to create the new folder is missing in Explorer

  The button new folder exists when I browse through the directories to backup certain file. But in normal mode, the Explorer of Windows Vista has not no any button to create the new folder. It is present in Windows XP and Windows 7. Is it possible to bring back this button in windows Explorer in Windows Vista.

  There is a third party software bxNewFolder which adds a "New folder" button in the toolbar of Windows Explorer. It also provides a hotkey (F12) to quickly create a new folder in Explorer. However, she runs whenever you start the computer, the installation needs administrative privileges and uninstall requires a reboot. It is a Browser Helper Object (BHO)

  I suggest that you just use "Alt + FWF" keyboard shortcuts in Explorer, the new folder appears instant ready to rename.

• Cannot create the directory on 9000 "BOLD" - FileConnection

  Hi all

  By using the following code on the Curve 8330 works very well, however it does not work on the "BOLD" 9000 * except * I create the directory manually, then it writes the file?

  String fname = new String(fileName);
  FileConnection fc;
  
  fc = (FileConnection) Connector.open(fname, Connector.READ_WRITE);
  
  if (!fc.exists())
   {
     fc.create();
   }
  
  OutputStream os = fc.openOutputStream();
  os.write(data);
  os.flush();
  os.close();
  fc.close();
  bos.close();
  

  Any ideas as to why it does not work on the 9000 "BOLD"

  Thank you

  Paul

  Perhaps you are already best solution.

  For me, every time when I want to create the file, I first have to check the root and folder (specified) exist or not.

  and if I create one and then write the file in the folder. I think that this covers all cases.

  So, I never try directly to create a file with a folder, that nobody know exist or not.

  See you soon.

• During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu.

  original title: facilities program

  During ANY installation of a program (e.g. Skype), I get the "year error occurred while attempting to create the directory C:\Program\Microsoft\Windows\Start Menu. What happened with cd installs, but also downloads on the internet.  I already "took possession" of the computer, which is still delayed freaking, but am still unable to fight through all the questions of security, I guess that.  Any help would be greatly appreciated as I'm about to DOWNGRADE to something more user-friendly.  Thank you

  BTW, this is WINDOWS 7 Home Premium

  I had this problem for a long time on Windows 7. Finally, by pure chance I came across this solution that solved the problem. -Take the shortcut of the property

  http://www.SevenForums.com/tutorials/1911-take-ownership-shortcut.html

  You will need to run the "fusion" in the context menu of a reg file, published as part of the solution to change some registry settings. On any folder, you'll get a context menu 'Take Ownership' which restores the property correctly. This solves a lot of problems installing.

  Many people have trouble with this and therefore decided to post here.

  Gem of a solution. Thanks to GRIM and Brink on Windows 7 Forum!

  -Jayawanth

• Create the directory objects with the path environment variable

  I need to create a directory object and wonder if it's valid to use an environment variable in the nom_chemin?  Example:

  CREATE or REPLACE DIRECTORY XMLDIR AS ' $ORACLE_HOME/rdbms/xml ";

  I read the following in the Oracle 11.2 documentation, but it is is not clear to me if an environment variable is allowed or not.  My reason for wanting to use a variable of environment as opposed to hard coding is for when I update, I have no back reference to the old House of Oracle.

  nom_chemin

  Specify the name of the full path of the directory on the server where the operating system files are located. Single quotes are required, so that the path name is case-sensitive.

  > I see that many developers have created objects to directory with the environment variables in the path.

  Please post reproducible test

  You know & realize that the Oracle database is independent of the operating system (OS)?

  Environment variable is OS specific.

• FTP - cannot create the remote folder

  Help, please!
  
  I use DW 8 on iMac. When you download my site (using sync or put), all two used to work properly, I now meet the following error message and then I hunted:
  
  "error - cannot create the remote folder / folder name and the path--canceled by the user.
  
  I thought that the file may be corrupted somehow and removed completely from the site. On my next attempt, another file has triggered the same message, and so on...
  
  So I am unable to download my site and the bits and pieces that are on the web are truncated because the site is incomplete!
  
  What can I do?

  You may find it useful to stick with the DW FTP. Having the ability to
  Download up/dependent files is nice, as are the other (select features
  more recent, select recently modified, etc.).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "hfeurstein" wrote in message
  News:fe8fti$K3U$1@forums. Macromedia.com...
  > To be honest, I don't know if I am running a firewall, I used to be a PC
  > user
  > but got so sick of stupid software windows, virus, constant need
  > updates etc that I bought an iMac and I can only assume that it is
  > running
  > some sort of firewall. In any case, I can confirm that during that time the FireFTP
  > has
  > completed download with no defects, this is why I would need is more DW.
  > Sounds
  > as if the investment is perhaps not quite interesting for a novice like
  > me
  > who really isn't a developer and just use it for simple tasks.
  > mercy
  > However, I like the ftp Sync feature and would like to continue
  > use it.
  > However, sounds as if there are a few flaws in the software
  > who
  > need to be ironed out.
  >
  > Having said all that, I really appreciate your help and especially
  > responsiveness, which is not easy to find these days. I'll take one
  > additional
  > Advisor you may have and thank you once more our support.
  >
  > Best regards, Harald
  >

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• create the new file using report generation express vi

  Hello

  In my application, I need to write that certain data in spreadsheet Excel. For whom I created an excel template and I used the express vi report generation Toolkit to record appropriate data in the columns of the place. I need a new file created every day by the name of the day and write the data that he rest of the day. I have problems, create the new file using this express vi. I tried to use the low level vi but not able to make properly.

  Join my code and the excel template.

  Help, please.

  Thank you!

  I suspect that your problem is illegal characters (' / ') in your path, certainly it is the case in your original vi. You need to format your path, something like this (underscore instead of a slash stroke):

  

• KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  KB2628259 doesn't install, cannot create the directory or file. Anyone know of a solution?

  Hi dakota25,

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• Error message: cannot copy... Failed to create the directory or file.

  I get the Error Message ' cannot copy (a file USB Store n Go): failed to create the directory or file.»  All of a sudden I started getting error message is when I tried to copy to the USB mass storage: "F:" copy on the removable key worked for a proor very long in this message. And there are a lot of empty space.  The diagnosis says that everything works correctly.

  Dear Clarence

  Try first to unplug the mass storage device, then reconnect and format it by Righ click on Format.

  Then try to paste these files on this USB key again.

  If it fails this time then format your USB using HP USB stick formatting to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I23839 tool

  Click Download on the page above. Install it and run it. This will guide you through the steps of formatting your USB drive in a few seconds...

  It is also useful for the repair of the almost dead usb keys.

  Concerning

  Zeeshan Ahmad

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")