Need to make the D drive

Similar Questions

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Put the new upgrade of Windows 10 on my 500 gig SSD and make the main drive (C :)

  Original title: Windows 10

  You want to install (upgrade) new Windows 7 Pro 64) Windows 10.  No problem.

  Here's my question and need help.  I want to put the upgrade of Windows new 10 on my 500 gig SSD and make the main drive (C :)  Just got new PC and the SSD is not yet installed in the new machine.

  Is there a way to do this?  I can install the SSD drive in the pc without problems.  But the pc is set up with the C: drive in the primary.  As I understand it, the update will work, but it will not be for the SSD.

  Suggestions?  Is this possible?

  Windows 7 installation will have to be eliminated if its currently on a separate disk. Which means you have to start over.

  I would first disconnect the hard drive with your Windows 7 installation.

  Install the SSD drive, then install Windows Pro 10 on this subject.

  Download and create a bootable copy of Windows 10 Pro:

  How to download official Windows 10 ISO files

  Demarrer start from the installation media, and then select the SSD during installation:

  How to: perform a clean installation of Windows 10

  Reconnect the hard drive, then format the installation hard disk.

  Option to consider:

  Create an image of the installation of Windows 7 system restore it on SSD, and then upgrade to Windows 10.

  How to pass Windows 7 to a bigger hard drive - books...

  Disconnect the hard drive, connect the SSD drive, then restore image and then upgrade to Windows Pro 10

  How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check out the YouTube video below:

  How to properly set up the SSD as boot drive and the HARD drive...

• I have a HP G71 model #G71-329WM. I need to replace the optical drive. What is the part number?

  My HP G71 model #G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct part number? Thank you

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01713747.PDF

  Replacement of optical discs with reference numbers HP are in Chapter 3, page 33.

  You can also read the instructions in Chapter 4 on removing the drive and get the number off of it, which is normally on a white sticker.  A reference to 6 digit-3 digit number (123456-001)

  You can search by the number of coin on eBay for a used camera but work or you can probably buy a new one at HP by entering the part number on the link below.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96

  Paul

• I need to format the hard drive and it won't let me because the program is running.

  Please help someone... I have a desktop running windows 7.  I need to format the hard drive and it won't let me because the program is running.

  Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it.  I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.

  Thanks for any help given, I'm desperate.

  Original title: help with windows 7

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• Xps420 - how to install a 2nd HD and make the new drive the boot drive?

  I bought a new and more large hard drive for my system XPS420 almost nine.  I want to install the new disk, create two partitions as the original (C & D (reprise)) drive, copy all of the original drive to the new drive and make the new drive the boot drive, with the original drive becomes a secondary additional storage drive.  I understand how to use the Vista disk management feature to create the partitions and format the new drive. After that, what is the best way to proceed?

  
  

• In features of style the layer maximum photoshop to 250 pixels. But I need to make the biggest race that I need to make a large logo of a warehouse. Any idea?     Thank you very much for your help!

  In features of style the layer maximum photoshop to 250 pixels. But I need to make the biggest race that I need to make a large logo of a warehouse. Any idea?

  Thank you very much for your help!

  And why you even do it in PS? What you wrote means that you need something big which will be made using cutting of vinyl or other techniques of signage and it requires to work with vectors, which means you use Illustrator, not Photoshop.

  Mylenium

• Hello! I need to replace the hard drive of my laptop Sony VPCEB33FM, serial No. 27532133-3071590.

  Hello! I need to replace the hard drive on my beloved laptop VPCEB33FM serial No. 27532133-3071590. that was purchased in the United States over two or three years.    I live in Switzerland and I think I might have to import a hard drive from the United States, how do I go about it and it would be easy enough to install it myself.  Is there a video I could watch that could help with the installation.  Thanks for any helpful answers.

  Hi... you can replace the HARD drive with disk drive hard Seagate ST9320310AS or Hitachi HTS545032B9S...

  You will find the site of esupport , HARD drive installation instructions... BTW, you need to use a recovery for the new HARD drive disk

  Hope that helps...

• Question 1: Is there some sort of privilege get admin and the State of return permanently? Question 2: Is there a way to make the disk drive C E?

  Problem 1: Window 7 and I have fought each other and Windows 7 is to win. I am the owner, administrator and only users of my computer 7 Professional and I can't do anything that requires an admin and most of the time it excludes me everything to do. I need to use this computer, so before you take a hammer, is it possible to give me permanent permission to admin? I do too many things that require admin to play with the standard user. I have a Windows 7 Professional, Internet Explorer 9, and Google Chrome, drive C has about 120GB and 1 TB E. I don't know why the people that set up this computer for me did it but now I have to fix, because drive C is on the point of falling.

  Problem 2: My C drive was never large enough to handle what I need, the E drive but how to switch the two? I tried the file transfer and some work and some have just done battle with Windows 7 worse and more complicated. Now the system is all messed up. It will not save, it wont recover, it does not work most things because the C drive is full and no matter how many things I delete or remove the C and put on E drive C never goes back down. I am a student adult and I guess I know just enough to be dangerous, but not enough to make a difference but how am I supposed to learn if I don't try?

  Unfortunately, your two statements are incompatible:

  • Now the system is all messed up. I tried to correct things, but there are still so many problems.
  • I really want to start from scratch.

  Your chances of fixing your problems are close to zero.
  The chances of an expert of your fixing problems are slightly higher, but only if let you it sit in the front of your machine and give him lots of hours trying different things.
  Since you seem to be dependent on a work machine, you must consider the following approach:
  1. Back up your data.
  2. Check your backup on another computer so that it is accessible.
  3. Perform a destructive factory restore.
  4. Reload your software.
  5. Create an image of your installation and store it on an external support.
  6. Check if the image is usable.
  7. Wait until the dust has settled (two to four weeks), and then create another image.
  8. Create a new image, once every six months.
  9. Always keep two more recent images.

  Many people skip the stages 2, 5, 6, 7, 8 and 9. Are absolutely essential for a robust installation that needs a quick recovery path. Skip the following steps allows you to save a bit of time at the start but cause a lot of grief later.

• I need to make the bookmarks bar visible when I start firefox

  I use the mozilla.cfg file

  defaultPref ("dom.disable_window_open_feature.directories", true);
  defaultPref ("dom.disable_window_open_feature.personalbar", true);

  I need something like this to use to make the bookmarks bar when I run firefox

  It is one of the persistent settings that are stored in the file localstore.rdf.

  • http://KB.mozillazine.org/LocalStore.RDF

• HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

  Where can I find the olderdriver that I can use windows 64 bits 10,

  because a program does not with the new driver.

  The year may be 2014 or almost.

  Your Timo

  @tisalmet

  Thanks for the reply with the details,

  You can activate the Device Manager to view hidden devices by following the steps mentioned below:

  To work around this behavior and display devices when you click Show hidden devices:

  1. Click Start, point to programs, point to Accessories, and then click command prompt.
  2. At a command prompt, type the following command and press ENTER:

     Set devmgr_show_nonpresent_devices = 1

  3. Type the following command a command prompt and press ENTER:

     Start devmgmt.msc

  4. Troubleshoot the devices and drivers in Device Manager.

  For more details: click here

  Uninstall all software and drivers for printers:

  When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

  1. Click Start, type uninstall program, and then press enter.
  2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

  Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

  1. Click Start, type Device Managerand press enter.
  2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
  3. Right click on the device, and then click Uninstall.
  4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
  5. Once the uninstall is complete, restart your computer as soon as possible.

  Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

  I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• Need suggestion about the optical drive for Satellite 5100 503

  Hello
  I have a little trouble with CD-RW/DVD for Toshiba Satellite 5100 503 drive. He writes about 1/5 CD - r and only if I write< 400mb="" of="" data.="" i="" tried="" cleaning="" the="" lens="" -="" no="" help.="" tried="" both="" win="" xp="" writing="" software="" and="" nero="" -="" no="">
  Do you know if I can replace the drive for a DVD burner? And if yes - which model?

  Hi Piotr,

  You can replace your new CD burner with vurtually any DVD burner that is the same physical size, but you should make sure that the new Recorder has a set-up similar to your current drive configuration.

  In general, the reader will be configured as Master, Slave and Cable Select (Csel), by the manufacturer and must match the configuration of your current player. One of the tools of Nero will show you the current drive configuration.

  Unfortunately, most retailers do not show configuration and with slim-line readers, there is no DIP switch that allows you to change it.

  Kind regards

• Need advice with the hard drive upgrade

  Greetings Applelonians:

  I bought a new HD 480 GB SSD for my 15 MBP (to 2011) to try to help improve the performance and install it myself. I'm hoping to get some tips on the sequences necessary for install and then restore my files Office 2011. (I've known slowness notable speed as well as issues of program Outlook-so think I should try to start more as fresh as possible).

  I'm clear on the mechanical steps to install the drive, but there seems to be a few options on the side of software I found. I have a copy of Snow Leopard, which came with my MBP, so in theory I think I should be able to install an operating system from scratch, and then do the upgrades, right?

  I also have a SATA cable / USB, I see that some have used to clone the existing HD. As mentioned above, I think I should start with a new installation of the operating system (which simply Mac store recommended for $80 there), so I don't think that cloning is the best option.

  Here are my questions:

  (1) if I install the new HD, because it is out of the box, and then insert my Snow Leopard, which will load the necessary drivers required? or do I need to format the drive (on the outside?) before you install it?

  (2) I have a Time Machine recent backup contains all my critical data that I need to restore (for most all files MS Office 2011). I was intending to do a new installation of Office 2011 after the installation of the HD and then restore my Office files from the external backup of TM. I wonder if the TM backup contains only files, or if it also contains the actual programs (e.g. office). If the latter, is there another method I use to transfer other files that a full restore?

  (3) also in this sense, once I get El Capitan, installed on the new disk, my TM of Yosemite Backup is in conflict with that?

  Thanks in advance for any comments and help!

  The f

  I recommend to format the new external SSD for Mac OS extended (journaled) and either use Time Machine or Carbon Copy Cloner to load the data on the new SSD.  Installation of Snow Leopard is not necessary.

  Ciao.

• Satellite L300D-10B - need to replace the HARD drive

  Hello.

  I have a Toshiba satellite L300D-10B and I need to replace the broken hdd in my laptop.
  It is a hitachi 160 GB at 5400 RPM SATA.

  Is it possible to move to a greater capacity (500 GB) and a little faster (7200 RPM).
  is - that someone at - he had success with any particular model?

  Hello

  In my opinion, is not a big problem to use a faster and larger HARD drive.
  The laptop supports the SATA HDD controller and this controller must be able to manage these drives.

  Welcome them

• Satellite 1905-s303, WinXP: giant screen, need to update the display driver?

  Hey guys, thanks for your help in advance!

  I am a Satellite 1905-S303 and Windows XP

  Here's what s past with my computer:

  When I turn it on there a little longer than normal to start. And I hear a sound of tck - tck on the back of my computer that I have don t usually hear.

  When it does not start: everything on the screen is HUGE, and I get a window saying: ATI Advanced Desktop Utilities could not initialize, because no ATI driver is installed OR ATI driver does not work properly

  Again, everything on my screen is huge (with the exception of the desktop background): the mouse, icons, windows, text, start menu, web browser, youtube videos, all. All the color and resolution stitching large and other than the fact that everything is great, the seams of the computer to function very well.

  I ran Spybot S & D, my antivirus software and Malwarebytes AntiMalware. Everything turns out to be clean.

  Okay, so, I tried to update my Device Manager display driver, and in the middle of installing Mobility M6, it is said: the file ati2mtag.sys on installation of ATI Technologies Inc. (VIDEO) DISC is needed. Type the path where the file is located.
  I n t have this I can not be completed.

  In any case, that s what I tried to do to solve this problem, but couldn't t. So I found this
  Windows XP Display Driver for ATI M-6 graphics card and its compatible with my model computer. Located here:
  http://virtualtech.Toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=2857 67xml & sliceId = & dialogid = 67910098 & stateId = 1% 200% 206 7908255
  I think that what I have to do is to install the above. Can anyone advice please?
  Is it safe to me, just download this driver and install it? Or is so dumb that it might mess up my computer? He says his self-installation.

  Thanks a lot guys for all the help in advance. I REALLY APPRECIATE IT!

  Hello!

  Search for this file on your HARD drive, then you have the path of this file, but if t can be found, reinstall the driver that you founded.
  To do this, you must not start in safe mode. Remove the old driver files in Control Panel > add or remove programs, restart and install the driver.

  On the sound of tck - tck, I can say that this results perhaps a faulty HARD drive. By controlling the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Good bye