Need to monitor the media port use on 8510
Info on MCU:
Cisco TelePresence MCU MSE 8510
Serial number SM021XXX
Software version 4.4 (3.49)
Build 6.18 (3.49)
Availability 6 days, 22 hours, 15 minutes
It is a HD blade that is configured for the ports of 40 media
I have to be able to look at the use of the port over time to know when we have exceeded the maximum number of ports and the appellant has been abandoned to the audio only
Thoughts?
--
Dan
You can find exactly what you are looking for in the event logs. I just maxed out our 8510 by a participant, the same fall first one I added in the test that matched my allocation of port instead of going 1-sending video of my test results are below.
30330 | 17:40:09.423 | CONFERENCE | Info | Unable to send the video to "Patrick Sparkman" - allocation exceeded |
30331 | 17:40:09.536 | CONFERENCE | Info | now able to send the video extended to "Patrick Sparkman" |
Tags: Cisco Support
Similar Questions
-
Hi, I got a black Berry and im tryin to transfer my albums out on it, but on my phone media player it keeps saying "the media playing uses a DRM not supported." I think its because I did face straight of my albums od cd but how I put them on my phone and this I need 2 do, please help. thanx. XX
Hello
1. What is the model number of this blackberry?
2. What is the file type or extension of file of these songs?I ask you to check with the help of blackberry if this file type is supported by the Blackberry phones. Normally protected by DRM files do not play on all devices that the license is purchased to play is limited to a specific device.You must have the Blackberry Desktop Software to transfer files between your phone and the Windows computer.
Follow the link below to download the software.
http://NA.BlackBerry.com/eng/services/desktop/
I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Need to change the com port number, but users do not have administrator rights
Our users don't have administrator rights, however, there are a few pieces of software that communicates with the hardware using COM ports. Since they don't have administrator rights, you may not click on advanced in the communications port to set the port to the necessary com com.
I found reg hacks online that say will open the advanced screen to allow the com to be changed, but none that I've found work successfully.
Can someone tell me the correct registry setting that I need to grant permission to in order to open the advanced under properties tro communications button and have the available com port number to change.
Thanks in advance.
Hello
You have the computer connected to a network or domain?
It is not possible to access advanced screen or advanced without administrator rights. I suggest you to contact the administrator of the system to help about it.
-
Determine the NIF port used by the HEART when it is configured in a port channel
I recently saw an excellent video of live Cisco UCS troubleshooting performance that showed how to track traffic network within Cisco UCS. The speaker made a comment however, to determine that NIF is used by a high HEAT when port-channels are used between the FEX and FI there are different commands to run. You will need to determine the outcome of hash-load balancing. Unfortunately, he never entered what were these commands.
Then when we have pinned port-channel instead of HIFs and NIFs veths, what commands will indicate which way is used?
Matt,
You can use this command:
B (nxos) # sh port-channel - balance load< this="" will="" tell="" you="" the="" load="" balance="" method="">
If you use source-dest-ip as in my case, you can use this command:
B (nxos) # sh port-channel - the balance of the charge-transfer interface port-channel ID vlan ID x.x.x.x y.y.y.y dst - ip, src - ip and it will show you something like this:
Lack of params will be substituted by 0.
Algorithm to balance the load on the switch: source-dest-ip
crc8_hash: 109 port id coming out: EthernetX / Y < this="" is="" what="" you="" are="" looking="" for="">
Param (s) used to balance the load to calculate:
DST - ip: y.y.y.y
SRC - ip: x.x.x.x
DST - mac: 0000.0000.0000
CBC - mac: 0000.0000.0000For the blade, depends on which the active vNIC is, for the FEX, depends on pinning, based on the server is located in the blade slot. Strange servers go through odd links and same servers through the same ports.
Remember to rate helpful answers.
-Kenny
-
What are the different ports used by BTA?
Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?
I am aware of the following:
9001 actually mentioned when you configure a load agent
1099 mentioned when you configure a data collector
1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
4444 -? necessary for the agent to load
7071 -? necessary for the agent to load
I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):
7073
8083
8088
I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.Ian
Oracle.port.RMI = 4444
Oracle.port.http = 8088
Oracle.port.empstart = 9001
Oracle.port.uil2 = 7071
oracle.port.dataCollector = 7073
Oracle.port.WebService = 8083
Oracle.port.JNDI.rmi = 1098
Oracle.port.JNDI = 1099
Oracle.port.HTTPS = 8433You can change the ports
-
\EmpAppServer\server\default\conf\oracle.propertie The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:
* 9001 (the agent communication port)
* 1099 (Datacollector Comunication Port)
* 8088 (for running scripts OpenScript)Concerning
Alex
-
the share button don't work and need to leave the app after used
the share button does not work and I need to force quit the app after used
Any individual plugin or all of them?
-
Increase in size of database extremely - need to monitor the size of the table
Hi all
I need help in the growth of the follow-up tables. It's that the database grows enormously from 192 G at 200 over five days, representing 5% increase in database size. The general scenario is that is that the db is growing 20% annually, but this increase in a week will cause future hardware problems.
Please advice to find the tables that is still growing.
Thank you
DBA Junr.Hi Georges s/n, do not know if this will help you now, but I did something like this on a daily basis for about 3 years. Literally, I have the size of each segment on a daily basis for this time and can go back in the graphic history of growth. If I had the question you ask the subject that I would be able to tell you exactly what segments are developed. If you need this on a smaller time frame, you can change the data stored in the column "created_date' to all the hours I guess.
Anyway, here's the create statement.
create table db_segment_history ( db_segment_history_id integer not null, owner varchar2(30), segment_name varchar2(81), partition_name varchar2(30), segment_type varchar2(18), created_date date default trunc(sysdate) not null, tablespace_name varchar2(30), header_file number, header_block number, bytes number, blocks number, block_size number, extents number, initial_extent number, next_extent number, min_extents number, max_extents number, pct_increase number, freelists number, freelist_groups number, relative_fno number, buffer_pool varchar2(7) ); create sequence db_segment_history_seq cache 1000; create unique index xpkdb_segment_history on db_segment_history( db_segment_history_id ); alter table db_segment_history add ( constraint xpkdb_segment_history primary key ( db_segment_history_id ) using index ); create unique index ak1db_segment_history on db_segment_history( owner, segment_name, partition_name, segment_type, created_date ); create trigger db_segment_history_bir before insert on db_segment_history for each row begin select db_segment_history_seq.nextval into :new.db_segment_history_id from dual; end; /
This is the insert / select that I use.
insert into db_segment_history( owner, segment_name, created_date, partition_name, segment_type, tablespace_name, header_file, header_block, bytes, blocks, block_size, extents, initial_extent, next_extent, min_extents, max_extents, pct_increase, freelists, freelist_groups, relative_fno, buffer_pool ) select owner, segment_name, trunc( sysdate ), partition_name, segment_type, tablespace_name, header_file, header_block, bytes, blocks, bytes/blocks block_size, extents, initial_extent, next_extent, min_extents, max_extents, pct_increase, freelists, freelist_groups, relative_fno, buffer_pool from dba_segments where tablespace_name in( select tablespace_name from dba_tablespaces where contents = 'PERMANENT' ); commit;
I hope this helps.
Michael CunninghamPublished by: Michael C on February 21, 2012 14:19
-
Need to create the directory (folder) using phonegap (mobile jquery)
In my application, I have a button field and text on each click I need to create a folder (folder create text file with text field data). I also read data from the text file. I also need to count the number of folder in this directory how it is it possible to phonegap + jquery mobile.
is it possible to control this feature in office or I need device?
I suggest you start here
www.html5rocks.com/en/tutorials/file/filesystem/
Its a good guide
-
need to set the com port for adapter Series USB Belkin need com 1 or 2 default to com8
I have a belkin Windows serial adapter 7 puts on com8 and I have equipment that does not download that on port com 1 or 2 How can I change the Compote? I can't change my gear to any other comport com just 1 or 2. There is nothing assigned to com 1 or 2 on my pc I can find in the hardware configuration.
Check the documentation that came with the device or on the Belkin support website. How to change the COM port is specific to the device and its drivers, nothing in Windows that can force this change for you.
-
How to monitor the SQL perticuler using the INDEX or not?
I'm running on a long-term quary and the output is coming very late. So, I want to know that the quary sql uses the index or not? How do I know that?Hello
You have not provided your db version?
You can check v $ object_usage in a simple way. Try to check the explanation of your query if you current sql is by using your existing index or not.
Check with dbms_xplan.displayRequest to go through the links of Ask tom and jonathan lewis
http://jonathanlewis.WordPress.com/2007/02/15/index-not-used-10G/
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:736825544526HTH
-Pounet N
-
Need to rotate the sub query using 11 g
Hello
Please find the below query
SELECT AGING_BUCKET_ID, DAYS_START, DAYS_TO, AR_AGING_BUCKET_LINES TYPE
WHERE AGING_BUCKET_ID = 3
It displays the data as below
AGING_BUCKET_ID DAYS_START DAYS_TO TYPE
3-9999 0 CURRENT
3 1 30 LAST
3 31 60 LAST
3 61 90 LAST
3 91 9999999 PAST
I tried to rotate the data, tried to make use of the PIVOT of the 11 g used the following query function
WITH AGBUCK AS
(
SELECT AGING_BUCKET_ID, DAYS_START, DAYS_TO, AR_AGING_BUCKET_LINES TYPE
WHERE AGING_BUCKET_ID = 3
) SELECT * FROM AGBUCK
PIVOT)
DAYS_START s1, s2 DAYS_TO, type
FOR AGING_BUCKET_ID
(3)
);
finished in the msg below:-ora-56902: wait for the aggregate within the operation of pivot function
can you please help me to fix it.
Concerning
YramHi, Yram,
Whenever you have a problem, after a few sample data and outcomes from these data.
Sorry, I can't make a good guess at what you want, and I'm not an Oracle 11 database now to test. I think you want something like this:WITH AGBUCK AS ( SELECT AGING_BUCKET_ID , DAYS_START , DAYS_TO || TYPE AS label FROM AR_AGING_BUCKET_LINES WHERE AGING_BUCKET_ID = 3 ) SELECT * FROM agbuck PIVOT ( MIN (days_start) FOR label IN ( '0 CURRENT' AS current_0 , '30 PAST' AS past_30 , '60 PAST' AS past_60 , '90 PAST' AS past_90 , '9999999 PAST' AS past_9999999 ) ) ;
The first thing inside the parentheses after the PIVOT keyword must be an aggregate function. If there is a one-to-one correspondence between the lines in the "input" table and cells in the output, so no matter if you use the MIN or MAX (or, in the case of numbers, AVG or SUM).
-
Need help with the horizontal navigation using <; ul >;
Although I normally use tables, I read that it is better to use < ul > and < li > my site horizontal navigation bar.
I have problems with spacing, I want each item in the navigation bar to fit in one area of 166 width.
Here is my CSS:
{#ul.navbar}
list-style-type: none;
make-weight: bold;
background-image: url (.. / images/166bar.gif);
margin: 0;
padding: 0;
Width: 100%;
}
#ul.navbar li {}
margin: 0px 20px 10px 20px;
list-style: none;
}
#ul.navbar a {}
text-decoration: none;
}How can ensure me that each element of the horizontal navigation bar is in the center of the box? Can any recommend a good tutorial or an example?
http://ALT-Web.com/demos/CSS-menus.shtml
Change
text-align: left
TO
text-align: center
I want each item in the navigation bar to fit in one area of 166 width.
In this case, you must use tables, images, or the vertical list menu.
http://CSS.maxdesign.com.au/Listamatic/
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
www.Alt-Web.com/
www.Twitter.com/ALTWEB -
may need to download drivers
It comes with Vista, upgrade install and activate Forum.
http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads
"Connect to a network, mail and the Internet."
They will help you with your question in the Vista Networking Forum above.
See you soon.
Mick Murphy - Microsoft partner
-
I have installed a freeware no net program, said to alot toolbar, but it installed in all cases. I then went to the Add/Remove programs in the contral Panel, says delete, then he said is was uninstalled, but it is still in the firefox and internet explore BOTH. I love Firefox, but want the toolbar out alot. Help, please
-
Do I need to release the bitmap after use?
If I create a new bitmap in a local function I must free from the output of the function or the OS automatically frees the bitmap image?
If I do this the memory release after the release of the function?
for (int i = 0; i)< 10;="">
{
Bitmap b = new Bitmap (...);
}
don't see any method in Bitmap to release.
It is Java... once the reference is out of reach, or is null, the garbage collector releases (finally!) memory.
Maybe you are looking for
-
I need version for Mac OS 10.7.5 - impossible to Mavericks
Help! I had Skype on my Mac, but due to a lot of documentation that it could cause some problems with the functionality of copy - paste from excel (which is strangely) I removed it, assuming I could reinstall it later. The problem is that he deleted
-
Hello, I buy W520, by market research I founf this W520 is ideal for me. But in seeking, I have some confusion, I found (W520) this model have two different keyboard, one contains the Enter key rectangular staraight, and the other have the Enter key
-
ENVY of HP TouchSmart 15-j000-series - memory and SSD hard drive
Hello I tried to look at the specifications for: TouchSmart HP ENVY 15-j004eo-computer pc laptop(E1S89EA) - but was not able to understand if it was possible to move to 16 GB of memory and replace HD with an SSD can someone confrima Traoré, it is pos
-
I locked myself out of my computer! I forgot my password help pls!
I had to put a password on my computer because my son kept while I SLEEP... Now, I've disconnected and don't remember my password... I don't have a recovery disk and I don't know what to do... Help, please.
-
8 hours battery, rubbish
My Acer laptop has to have eight hours of talk time. However, each time I reload completely, then ONLY SURF THE INTERNET USING A ADAPTER WIFI which is connected via USB (NOT WATCH ANY VIDEO, NO AUDIO... Everything SIMPLY SURF the WEB), how is it, my