Do I need to release the bitmap after use?

Similar Questions

• the share button don't work and need to leave the app after used

  the share button does not work and I need to force quit the app after used

  Any individual plugin or all of them?

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Spit Lightroom 4.3 when using the brush after using the red eye tool

  I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

  The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

  Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

  It seems something funny on your establishment for sure that there is not a wide spread thing.

  What exactly is your establishment and where are the various files located - catalogue, images, etc.

• Satellite Pro A120: Need to update the BIOS after upgrade CPU

  Hello

  I have a Toshiba Satellite Pro A120 and I need to update the bios of a change in cpu cause.
  The laptop works very well, but for some reason any with the new processor fan runs always full.

  A lot, I searched but found nothing.
  The model number is PSAC1E-0QL04CG3 of ideas where I can find the bios?

  THX in advance,
  John

  Hello

  First of all: update BIOS doesn t help you.
  Why do you think that BIOS update should help reduce the activity of fan?

  I guess that your new processor is faster. Right?
  So it offers more performance and this leads to higher heat dissipation... so finally the CPU must be cooled and this can be done only if the cooling module would turn faster you agree with me?

  By the way: the update of the BIOS is on the page of the Toshiba UE driver. Since the satellite Pro A120 is very old series, you will need to search for drivers in area Archive (Type of product-> Archive)

• RILD eats the battery after using my music

  Strange coincidence, but both times I had the process rild run amok and obliterate my battery on my Droid4 have been after using the MyMusic player provided by Motorola. Restart the phone (lock + low-flying 10 dry) does not help, power-off-then-on does not help. The only thing that stops rild for me so far is to run the battery at 0% while cooking the entire phone to a bunch of warm pipes until it stops. Recharge and reboot - everything is fine - for a while.

  Sorry to hear that it is happeneing you. We already have a current thread on this issue where Matt from Motorola is involved in this thread.

  I'm closing this thread to keeos organized things.

  You can often find answers and avoid the double post if you use the search at the top of each page.

  here is the link to the current thread.

  Thank you

• Cannot use the network after using McAfee antivirus with removal tool

  Original title: Mc McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible.

  MC McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible. After removing the software and restarted, computer cannot connect to the net (device manager shows problems with NIC miniport McAfee mc?).

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can't connect to the network after McAfee antivirus using more the removal tool to remove McAfee software.

  The network drivers is maybe damaged.

  1. What is brand and model computer?

  2. What is error right messagee you receive in Device Manager?

  To confirm that the problem is with the driver, do us reinstall the driver:

  a. click Start, click Run and type devmgmt.msc and press enter

  b. now right click on the network card and uninstall it and restart the computer.

  You can also get the latest version of the driver from the manufacturer.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Can not see the 2nd partition on the computer after using the shrink volume option

  I had 2 partitions on the hard disk the same... but after separate 60 GB unallocated space of 2nd partition (drive D) and after rebooting I don't see my 2nd partition. After that I tried to change the drive letter and path, but it displays the following message 'the operation did not complete because the disk management console view is not updated. Refresh the view by using the refresh task. "If the problem persists close the disk management console, then restart disk or restart the calculation Managerr. I don't want to lose the data.

  Hello

  ·         Have you installed a third-party program like Partition magic on the computer?

  Try these methods further and check if it helps:

  Method 1:

  Try to use diskpart to assign a drive letter to the disk #0 Partition #1.

  (a) click Start Orb > type diskpart

  (b) click right diskpart in the above results > click run as administrator right

  (c) once diskpart load type list volume, press enter

  You should notice that you can see your partition you use for your data, it should not not have a drive letter assigned to it.

  (d) type select volume 6 (replace 6 with the number of the volume assigned to the partition in question)

  (e) type assign letter Z (replace Z with the letter you want to assign)

  When you look in the computer, you should be able to see your score.

  Method 2:

   

  I also suggest that you run the Microsoft fixit tool and check if that helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  You can follow the steps in troubleshooting section below and check if it helps:

  http://support.Microsoft.com/kb/2001877

• Need to create the directory (folder) using phonegap (mobile jquery)

  In my application, I have a button field and text on each click I need to create a folder (folder create text file with text field data). I also read data from the text file. I also need to count the number of folder in this directory how it is it possible to phonegap + jquery mobile.

  is it possible to control this feature in office or I need device?

  I suggest you start here

  www.html5rocks.com/en/tutorials/file/filesystem/

  Its a good guide

• Drive external hard used on the windows computer wants me to format the drive after use on a mac

  To get into the details, I have a 1 TB western digital hard drive that I used for a few months to work on a laptop running windows 7. One of my friends using a macbook borrowed my hard drive and now when I plug it into my laptop I got the error message "you need to format the disk in drive d, until you can use it. The options are to format or cancel it. If I have to cancel it, give me the D:\ message is not accessible. The disk structure is corrupted and unreadable.  This is the drive I have months of data to work on it and I need to be able to use it as soon as possible.

  Run as administrator command prompt and run the following command to repair the disk structure.

  CHKDSK D:/F/x

  It will correct the errors on the disk by removing the volume. Once the process is complete, try to access again.

• Relative to the car after using DVR capture

  I have a Seagate 1 TB GB-Flex in the car that I used as a digital video recorder attached to a satellite receiver. I don't have have the receiver and want to use the disk for general backup purposes. I am running window OS 8.1. When I connect the drive, File Explorer doesn't. The control panel can see, but I can't do anything with it.

  Any suggestions?
  Thank you

  Go to disk management and assign a drive letter to the drive.

  If the POR was using Linux, you will probably need to format.

• How to set current row in the table after use the button tab on inputText

  Hi all
  My first post.., I am beginner in ADF and I'll try to explain my problem.
  
  For now we use ADF 11 g (11.1.1.4), in a jsff page I have a table with a column of inputText.
  On the the inputText valueChangeListener, I invoke a method in a bean viewScope that call an EJB method, make some services to the EJB on the modified line. After that, I update the VO and the table (because other values in the row have been changed) and reset the focus on the inputText even modified by the user with javaScript, because the focus was lost after updating.
  So far, everything works fine.
  
  When I use the arrow keys to change the selected line in the table, this is excellent work (focus is always in the inputText next or previous), but if the user tries the key tab allows you to change the current line, the inputText on the line that has the focus, but the current row in the table is not changed (I think that is normal).
  
  My question: How can I change the current line after the tab key in this case?
  
  I don't know if it is really clear, not easy to explain, do not hesitate to ask for more details.
  Thanks in advance.

  Hello

  My question: How can I change the current line after the tab key in this case?

  Use a client event to listen to the keyboard entry and intercept the tab. Use af:serverListener to call the server to set the rowKey on the table and deliver a PPR for the table to repaint

  See example 11 on http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html#CodeCornerSamples

  to learn more on how to use the client listener and the receiving server

  Frank

• Need to rotate the sub query using 11 g

  Hello
  
  Please find the below query
  
  SELECT AGING_BUCKET_ID, DAYS_START, DAYS_TO, AR_AGING_BUCKET_LINES TYPE
  WHERE AGING_BUCKET_ID = 3
  
  It displays the data as below
  
  AGING_BUCKET_ID DAYS_START DAYS_TO TYPE
  
  3-9999 0 CURRENT
  3 1 30 LAST
  3 31 60 LAST
  3 61 90 LAST
  3 91 9999999 PAST
  
  
  I tried to rotate the data, tried to make use of the PIVOT of the 11 g used the following query function
  
  WITH AGBUCK AS
  (
  SELECT AGING_BUCKET_ID, DAYS_START, DAYS_TO, AR_AGING_BUCKET_LINES TYPE
  WHERE AGING_BUCKET_ID = 3
  ) SELECT * FROM AGBUCK
  PIVOT)
  DAYS_START s1, s2 DAYS_TO, type
  FOR AGING_BUCKET_ID
  (3)
  );
  
  finished in the msg below:-ora-56902: wait for the aggregate within the operation of pivot function
  
  can you please help me to fix it.
  
  Concerning
  Yram

  Hi, Yram,

  Whenever you have a problem, after a few sample data and outcomes from these data.
  Sorry, I can't make a good guess at what you want, and I'm not an Oracle 11 database now to test. I think you want something like this:

  WITH      AGBUCK      AS
  (
       SELECT      AGING_BUCKET_ID
       ,     DAYS_START
       ,     DAYS_TO || TYPE      AS label
       FROM      AR_AGING_BUCKET_LINES
       WHERE      AGING_BUCKET_ID     = 3
  )
  SELECT     *
  FROM     agbuck
  PIVOT     (     MIN (days_start)
       FOR     label
       IN     (     '0 CURRENT'     AS current_0
            ,     '30 PAST'     AS past_30
            ,     '60 PAST'     AS past_60
            ,     '90 PAST'     AS past_90
            ,     '9999999 PAST'     AS past_9999999
            )
       )
  ;
  

  The first thing inside the parentheses after the PIVOT keyword must be an aggregate function. If there is a one-to-one correspondence between the lines in the "input" table and cells in the output, so no matter if you use the MIN or MAX (or, in the case of numbers, AVG or SUM).

• need to adjust the paper after each print

  I have that 7520 printer all in one for 2 months (new)

  After each impression I have to adjust the paper otherwise, I get the message: no paper

  Make sure your paper guides are tight against the edges of the paper, while paper is loaded in the tray.  There should be little nicks in the status bar to help you confirm that the guides are engaged in the correct position.

  Otherwise if you are referring to the feeder manual adjustment can be the best thing you can do.  AutoDocFeeders are normally not snap and often need to be messed with on many models of printer.  Sometimes a small building of habbit can solve a problem like this.  If this isn't the case, you can try to contact HP support since it is such a new printer.  However, unless you can prove there is a mechanical fault on the tray or feeder, it probably isn't something they can do.

  You don't have something with the message No paper well.  Same as if the guides are disabled the printer should recognize there's paper in a way or another.  Questions guide paper normally takes place at the inadequacy of the size rather than no paper error.

• Illustrator CC 2015, need to draw the line after line with arrowhead already attached.

  CorelDesigner has an option where you just draw your line / lines and arrow is already added at the end of the line.  Not only that your arrow lines can have a color outside the line (which surround it). So if you make a technical with arrows pattern when placed on top the drawing there is white or what ever color you want outside the black line (what thickness you choose so) so it's easier to read the technical drawing. So, basically, it's not line against line. That's why you would put a little white around the line. He gives him the space to breathe and easier to read the technical drawing. In Illustrator, I find that I draw my line. Then hover over the line options palette, and then scroll down arrow heads and choose my arrow head. Then calculate the rest, make outside the line have a white that surrounds it. Thus, it can be placed on technical drawings. I find there are many steps I have to do when Corel has this feature built-in and you leave. I currently have a trial version of Corel. But... I already have Adobe Suite. I don't want to have to buy another program. But I also see that CorelDesigner is somehow more user-friendly for people who need to work with drawings technical line (writing). I understand that not every program offers the same tools. But I really need the speed of it because I work with a lot of technical CAD which are handed to me. If there is a way in Illustrator to draw my lines one after the other with the arrow head already attached? Then of course I need little white around it if its duplication on other technical lines.  It just seems like a lot of steps in Illustrator. I also understand I could draw a line w/arrow attached installer as I want. Then draw another line... use the eyedropper tool and click on the correct line and my other line with change. Once more... what a pain. I feel that I have to jump through hoops to get my final result. I hope so that there's something built in Illustrator, I did not know was there and just unnoticed.

  Yes, I was able to do, but this is delicate (buggy) to get there.

  Make sure that the two traits have identical points of arrows and line widths.

  After you have created your effect of offset on long-distance running, move the effect of shifting way somewhere else in the stack, and then put back where it was. This seems to be the only way to make it work. Weird.