Need to read a RT - 11 on Windows SCSI disk

Similar Questions

• Please, I need acrobat reader for windows this 3.0. Thank you very much

  Hello, I have a Jornada 720, I need to find Acrobat Reader for Windows CE 3.0.

  Thank you.

  Hi andreac16123735

  Adobe Reader is not available for windows THIS 3.0.

  Kind regards
  Rahul

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• error message in windows xp reads... Windows-no disk _

  .. .reads... Windows-no disk
  Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c
  This message arrives soon I loading windows and stay even when I press on cancel it keep coming back...
  don't know what that means or do about it... need a knowledge...?
  Kevin Australia

  Hi there Kevin,.

  You can try a system restore and restore Windows to a date where you know you may not receive this error message, or you can try the following:

  Click Start , then run...

  In the race... box type Regedit and press enter

  Click on HKEY_LOCAL_MACHINE

  then the SYSTEM

  then ControlSet001

  then control

  and then Windows

  Find the ErrorMode entry on the left pane and double-click it.  Change the value data input 2 (the default value should be 0).

  Close Regedit and restart your PC.

  Let me know how it goes :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my Web site | http://www.systems-and-solutions.co.uk - where I work

  
  Info from Microsoft about phishing . Information from Microsoft on the rogue security softwar

• I need to upgrade my vista basic to windows 7 my processor is 356, memory 512 MB, 120 Gig hd

  I need to upgrade my vista basic to windows 7 my processor is 356, memory 512 MB, 120 Gig hd

  Hello

  You're wasting your time upgrading to Windows 7 with only 512 MB of RAM

  Read what it takes:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 system requirements

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • Graphical device DirectX 9 with WDDM 1.0 or higher driver

  See you soon

• Cannot open Help files Excel, error message "couldn't be read on this version of Windows.

  Original title: WinHlp32.exe

  I have a few help Excel files regarding the functions of macro 4 I need to access.

  When I click on the file I got a message saying that the help file could not be read on this version of Windows and that I go to Wicrosoft support

  When I'm on the Microsoft technical support, I see a link to download the file WinHlp32.exe for Windows 7

  When I click it it brings me to the Windows Genuine Advantage download page that I should run to access the WinHlp32.exe file

  I download the Windows Genuine Advantage and tried to run but I got a message that this virsion of the validation tool is not taken in charge more and I need to download the latest version I can not find...

  grrrrr!

  I found the download file on the net and tried to run it... the result is that I got a message that this update does not apply to that computer...

  Grrrr!  Grrrr! Grrr!

  Is my version of windows: Windows 7 family premium, version 6.1, service pack 1

  The question is: how to open these old help files?

  Hello

  Faced with the issue only with the Excel Help files?

  I suggest you try the procedure described in the link and check if it helps.

  I can't open the help that was created in Windows Help format (WinHlp32.exe)
  http://support.Microsoft.com/kb/917607

  I hope this information helps!

• Windows Media Player 12/Windows 7; Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support.

  Why my computer says "Windows Media Player cannot read the Blue Ray Disc. The disk has been created in a way that the player does not support "?  I have Windows Media Player 12 and it comes a new movie.  I can play other discs blue ray on this computer, but not this one.  Is there an update that I'm missing or a codec I need?

  Thank you

  This new film format is not supported by Windows Media Player, here is a link on how to play a dvd on windows media... player and codecs...

  http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player.

  If you can not play... try using third-party codecs, but at your own risk :D

  Hope this helps you :)

• I need to read a pdf document or a web page using the Narrator

  Original title:

  Narrator

  Y at - it a Update for Narrator to 8 X 64 Windows because I can't not to read anything! It will say my main features or open the window on or off, turn off, but it will not READ! very frustrating. I'm not blind, but my eyesight is poor, so I thought I'd give it a try, but I can't read something important. It will read a header or strikes (that I don't need) I need to read a pdf document or web page.

  Hello Tracy,.

  Please, press the logo Windows + ENTER key to start Narrator, and then minimize windows accordingly. Done this, open the page/document you want to read, and then press SHIFT CAPS LOCK + H.

  It reads the current page/document? You use Internet Explorer?

  Also make sure that other settings in the Narrator is correct.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows/hear-text-read-aloud-Narrator#1TC=Windows-8

  Please let us know the status of the issue.

• I need to read barcode using visa OR and store it in file .text

  Hi all

  I need to read to Barcdode using communications series (OR visa) and store it in .txt) file...

  (I have attached series vi read file... here I can able to read codes to bars, but quickly it goes to zero...)

  Hello

  have you checked on the examples of series communication delivered with Labview?

  In addition, if you want to send the data to the port of reliable succession, I suggest to use a cleaner approach - pack your data of barcode in a significant data structure. The data structure would look like AUT like this: 1. start of data (described at the beginning of the data packet), 2. data bar code, 1B. end of data (described at the end of the data packet) and 4. checksum of data (apply only 1 a or 1 b, whatever you prefer). If you plan to add additional information to your package of data later, this would be really easy to change. This way you can also check if the data got lost during the transfer, notify the user.

  You can take a look at how to read this data package here (set up a loop of producer-consumer, although not necessary):

  https://decibel.NI.com/content/blogs/kl3m3n/2014/10/17/serial-data-send-with-CRC-cyclic-redundancy-c...

  Best regards

  K

• I need to read a variable string unsolicited series.

  
  

  Hello Mr President

  I need to read that a series of data means, in FRA 1250 (Solartron) when we are sweeping, the o/p is a series of data. Through RS432, it's getting (hyper terminal) but via GPIB, I can't get this data. I used Visa read. The error has expired.

  If it's GPIB the hyper terminal does not work. I can control all the parameters of the FRA via PC and it will sweep.

  Does take a scan of the palette of the chain after read or direct VISA can we take the results.

  Automation of FRA is 75% compared to only 25% is waiting, in other words, this problem solve sweep the data to be read and stored in a text file or plott chart.

  Another question is how to get a graph of the three axes. In FRA means, we had three o/p-"frequency, dB, Phase.

  Are there 3D graphics, but I need in 2D? How to turn a graph shaped waveform of 2-axis 3 axes?

  Please help me.

  Thank you RAY. R for responding

  In fact I need 3-axis graph graphic not 3D. medium freq 3 axes in the Xaxis and the gain or the size in the Y

  axis and the secondary Phase (Y1 axis). I had the idea of the site nor itself. I can explain

  Choose the waveform graph. It was 2 time axis (x, y) in the x axis and amplitude in the y-axis. you

  Simply place the cursor on the line and give a right click then make a duplicate. It will create an axis of amplitude more

  just behind the amplitude2 real oneas. once more, give arightclick on the amplitude and Exchange. The amplitude

  (a real) will go to the right of the chart as the axis Y high school. Simple!

  Come to the essential, to get the FRA data we already used a READING of the instrument palette its o/p is a

  Required string. Well, it'll be the scan of a range of chain. In this palette string format is here. We will write a

  command "%f, %f, %f ' to get frequency, the magnitude and the phase respectively. This o/p is of type double. This will allow to indicate

  or shows o/p values. These outputs connected to a range of construction table. This table is directly related to

  the waveform graph which we are made as graph 3 axes. the chart axis are to rename as x-freq; Y (Left).

  greatness and the axis (right) secondary - Phase. All axes are auto range mode. Our tracker online is ready!

  If we give a scan, the plotter will automatically trace. DEFENITLY HE'LL DRAW!

  Tomarrow I can give a Visual of that.

  Thank you all for coming to this discussion...

• Register to offset or feedback or other... need to read in the new value by loop

  I'm having trouble with my values "Relative position". At the beginning of my program, the system resets to the (0,0) position based on the relative position of the values read from the controller. This does not work properly. The program then moves the in the while loop that runs as long as the connection to the controller is maintained. This while loop has a structure of event in there with various buttons as triggers. There is need to read the relative position compared to the desired position and send the difference to the controller and run the movement. The entrance is used as position and execution orders. However, for some reason, read in relative position does not change never 0. This isn't a problem with the controller. If I send a request to the controller in a separate program, it returns the correct values for the relative positions. I have no idea why this is happening. I examined the shift registers and feedback and tried both, but I do not wire them properly or do not work.
  Any suggestions?

  

  I have it! For those who are curious this issue had nothing to do with LabVIEW. It is the request that I entered. If you notice in the excerpt that I send "= the Rwandan Patriotic Army" or "OPR =". This isn't scoring application appropriate for the Galil controller. The correct notation is "APR" and "BRP" (remove the '=' sign). Now, the program runs properly

  Thank you all!

• Need to read a 30, 1.5 a analog input using a NOR-9205

  Problem: I need to read two analog inputs with good resolution using a C-Series card. The two beaches of signal are 0-30 V @ 1.5 and 0-5 V (not sure of the current). I need to be able to read the signal 5V with a precision of mV (or 16-bit resolution).

  I looked at the module-9221, which works very well with the 30V, signal, but does not have enough resolution for the 5V signal. The 9221 is 12 bits on the beach of 60V.

  I looked at the NOR-9205, which works very well with the 5V signal, but it cannot process the higher V 60 signal.

  If a voltage divider circuit comes to mind, but has anyone found a good solution to this (other than to get both modules)?

  Well, the current should not question.  The entrance of the analog device (ideally) should draw no current and everything running on the source will cross the UUT.

  A 4:1 voltage divider should evolve the signal to 9205 AI as long as you do not violate the absolute maximum voltage between a pin of the device and the Earth.

• MS Money 2005 - I rebooted the software, but it does not automatically download the update needed to read my existing data files

  Due to a hard drive crash, I had to reformat my hard drive,
  therefore lost my copy previous update of MS Money.
  I reloaded the software from the CD, but it does not automatically download the update needed to read my existing data files.
  Can someone help me read my old data files?

  Microsoft or anyone have made available as a patch to download?

  Hi Derek,.

  Since the problem is related to Microsoft Money, I suggest you post your question on the Forums of money from Microsoft.

  Microsoft Money Forum

• Need an item, ppt on Gaming on Windows 7.

  Hi all

  I do a session background on windows 7. I needed some documents on the game on Windows 7 where I want to talk about more information on enchanments on Directx technology. It is an Evengelism event. I tried to connect but it no no no demos and ppt on this topic. If someone can help me with this.

  Hi GandipK,

  You can follow the links given below to check if the articles help you with the session on DirectX technology.

  http://www.Microsoft.com/games/en-us/aboutGFW/pages/DirectX.aspx

  http://Windows.Microsoft.com/en-us/Windows7/products/features/DirectX-11

  http://www.Microsoft.com/Windows/Windows-7/features/DirectX-11.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't read my dvd - r with windows media player

  I can't read my dvd - r with windows media player.  Any help much appreciated.  Thank you.

  I can't read my dvd - r with windows media player.  Any help much appreciated.  Thank you.

  See KB article: -.
  You cannot play a DVD - RW or a DVD + RW disc using Windows Media Player or Sonic CinePlayer