need to reset the timer if away for a minute

Similar Questions

• Need to reset the date and time

  My system has decided that it is Jan.4th 2004 and everytime I turn it on, I need to reset the date and time. How can I cure this?

  Packard Bell's Web site does not recognize the 'ALT' CO2 as a model.  Despite this, however, PB seems only to provide a 'generic user guide"which is not described the replacement of the motherboard or the battery at all.  In fact, the only thing he has to say about batteries is be careful how get rid you of them.

  Your computer is a laptop or Desktop/Tower computer?

  If you have a desktop/Tower computer, you can look here--> http://www.uktsupport.co.uk/pb/mb/pbmb.htm and see if you can identify the motherboard used in your computer.

  However, if you have a desktop/Tower computer, the best thing to do is to unplug your computer from the network and, taking the precautions perfectly static electricity, open the box and inspect the motherboard yourself.

  A newish mother on the above site, http://www.uktsupport.co.uk/pb/mb/cosmos.htm, shows the battery on the center line vertical and more to the left.  It's just below the 3 PCI slots.  If you have something like that, a Visual inspection should be enough to see how to remove it.  The type of battery will be engraved on the top of the battery.  In the photo, it looks like a model CR-2032, but there are several models of battery on this size.  Battery CR-2032 (or equivalent) is available in almost every pharmacy chain in the United States as well as online and stores like Radio Shack.

  The page for an old motherboard, http://www.uktsupport.co.uk/pb/mb/450.htm, indicates that the battery is a '3.0V DC Lithium soldered to the motherboard"and if that were the case, it would probably be something that you wouldn't do yourself.  However, this thread is to think that all you have to do for this particular mobo is actually finding the right type of support plug-and - battery.

  If you have a laptop, things can get quite a bit more difficult.  If you can find a different model for your computer name, you may be able to find the manual here--> http://tim.id.au/laptops/packardbell/ , but some of these manuals can not explain clearly how to get to the CMOS battery.

• New Internet Service, do I need to reset the router E2500?

  I had used temporarily my router E2500 to work with a wireless broadband source by connecting it to a Cradlepoint CTR500.

  Now I will connect the E2500 to run (and ongoing) with Time Warner Roadrunner using a modem cable Scientific Atlanta WebSTAR DCP 2100. Given that I'm changing the source of the internet, do I need to reset the E2500 to factury default values, and then perform a new installation using the Cisco Connect software?

  The cable modem is currenlty connected via an ethernet straight cable to the PC. I had read that remove the ethernet connection and the cable from the cable modem and the modem powered off for 10 minutes will cause the modem to "forget" the PC's MAC address.  Once connect it MAC address of the PC had been "forgotten", the ethernet cable from the modem to the router, which make the modem pick up the router's MAC address and eliminate the need to clone the MAC address of the PC. Does this sound correct?

  Unplug the power to the modem cable for 30 seconds should be good enough. In regards to the router, you should be able to get without a reset, if it is set to DHCP for the type of internet connection.

• Reset the timer interval on the button

  I am building a touchscreen for a stand presentation and I need set a timer which stipulates that if there is no activity, it goes back to frame 1.

  I need if possible to reset the timer if someone presses any key to start up again.

  I have a setInterval time put in the first image:

  var timer = setInterval (timeOut, 6000);

  function timeOut (): Void {}

  gotoAndPlay (1);

  clearInterval (timer);

  }

  A click of a button is:

  on {(press)

  gotoAndPlay (100);

  clearInterval (timer);

  }

  I placed the clearinterval (timer) button to stop the clock, but were not able to reset.

  Any help would be appreciated.

  use:

  clearInterval (timer);

  Timer = setInterval (timeout, 6000);

• Reset the time-out without clicks or the keyboard input

  Hey all,.
  SO, I have a RFID reader that triggers events in a film's Director. My timeout is set to 2 minutes, but it is possible for the user to never touch the keyboard or touch screen and always in interaction with the program through the RFID interface. How can I reset the timer of the time-out for the program don't timeout in the middle of the activity of the user. I can't find anything in the documentation that says, although it seems that there should be a property that I could put everything back to 0. Like countDownTime or something like that. Any ideas?
  
  -Bruce

  > it seems there should be some
  > property that I could just reset to 0.

  If you use the ' timeout' Manager (and setting of the)
  timeoutLength), try to reset 'timeoutLapsed' to zero when you need to.

• I need to reset the password. Can't do Internet Igbo connecton

  I need to reset the password. Can't reset without the Internet. Cannot connect Internet cause without password to start macbook

  Reset password

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• 15 - an050nr: I need to reset the BIOS password.

  My model is 15-an050nr. I forgot my password. So I need to reset the BIOS password. Let me know the solution.

  Hello

  The password screen, press enter 3 times and you will receive a 'code to stop' - post returns with this code.

  Kind regards

  DP - K

• How can I reset the password of admin for HP Deskjet Ink Advantage 2545

  I lost the password to unlock the settings of the printer. Is it possible for me to put this?

  Welcome @jaraneta,

  Thanks to their participation in Forums of HP! I see by your post that you need to reset the password of the printer. I will definitely do my best to help you.

  I can send you this information in a private message.
  In the forum next to your name to handle just click on the envelope
  to see it.
  
  Feel free to click on the button "Accept as Solution" and the
  'Thumbs Up' for my help. Please let me know the results
  and if there is anything else I can help you. Thank you!

• need to reset the password on HP 110 mini - CNU937DQ6G S/N

  Need to reset the password on HP 110 mini - S/N [removed privacy]-have not used in a while and I forgot the password. Locked out

  Welcome km. Try.

  e o f t g 5 h x 9 l

  Third letter lowercase l.

  Fourth lowercase O

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Reset the timer to a vi running

  Hello

  I used 2 time elapsed timers inside my data acquisition loop to acquire digital signals only between lets say 11 s and s 11.05. The vi working properly if I stop the vi and run it again but the problem I have, this vi is a Subvi and since it is called by other vi, the timer will not be reset when it is called again if the elapsed time start from zero. Could you please let me know how can I reset timers when this vi is called as a Subvi.

  Thank you

  Hello tintin.

  To get the behavior (I think you) you want, you will need to use some sort of logic to reset the express screws when you want to - I suggest to use iteration of the loop (i) meter and a zero? Comparison function to reset the timer on the first iteration of the loop.

  Kind regards

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• How can I reset the compressed files (zipped) for normal zipped folders of other programs that i'ved open with in order to extract the zipped files and download the zipped files? __

  I changed somhow setting folder zipped removable zipped files to adobe reader and internet explore and I think it's by using the open with option and I need to reset the zipped folder that looks like a folder with a zipper that can be extracted, so I can download and extract zipped files! But how?

  Hello

  1st 3 here should fix you up

  How to restore Vista built-in ZIP files Support
  http://www.Vistax64.com/tutorials/65254-zip-file-support-restore.html
  How to enable or disable the files compressed in Vista
  http://www.Vistax64.com/tutorials/93827-zip-file-compressed-folders.html
  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  ---------------------------------

  How Unassociate a Type of Extension file in Vista - and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
  Restore and return the file Association in Windows Vista if Original
  http://www.mydigitallife.info/2008/06/22/restore-and-reset-file-association-in-Windows-Vista-back-to-original-default/

  Reset and Fix Broken Windows Vista file Ext and Type Associations (include EXE, COM, SYS, ZIP, LNK,
  Folder, drive)
  http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-Windows-Vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/

  For Windows Vista file association problems
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Need to reset the Data Warehouse

  Hello
  
  I need to reset the data warehouse so that I can start my first ETL process. However, I am not able to do DAC customer worm 7.9.5. When I click on 'Tools'-> 'management of ETL"->"Reset Data Warehouse"nothing pop up to do not know why, all other links and windows opens, with the exception of this. How can I solve this problem?
  
  Is it possible for me to do the reset manually?
  
  I checked on the internet and found AS below: -.
  
  D4 how do you run a full load (incremental)
  A: reset DataWarehouse. Just truncate the table S_ETL_REFRESH_DT in the repository of the dac
  
  So in our case, to truncate table will then be W_ETL_REFRESH_DT rite? Please confirm. We have planned to operate the ETL at 18:00 today.
  Y at - it all the other tables I need to truncate this way?
  
  Thank you
  Saran.

  Hello

  I worry if this window does not work correctly, you should probably work out why, I use 1.5.0_17 jdk in our environments (with apps 7.9.5) and that works fine, I suggest to try another version of the JDK and see if that fixes the problem.

  Kind regards

  Matt

• retrieve the time backup machine for new ssd internal

  I had to replace my internal HD on a 2012 end iMac, so I went to SSD.

  I had saved my first system and files in Time Machine before that.

  What is the process of a) formatted internal SSD new and b) recovering the original of external backup Time Machine?

  As I have to reseal the iMac just to make it work, I don't want to have to open it again to play with the new SSD!

  Hope that you already have a boot USB OS X in hand disc (I always have a copy must have on hand).

  Plug the USB into the USB port and Time Machine,

  by key pressing 'option' as soon as 'chime' begins.

  You can choose the selection of the boot drive.

  OR

  If your SSD does not start on her file (e.g. blank) - it should start automatically via the USB.

  (a) - Yes, using "disk utility" - in the menu bar superior, to partition the drive (GUID) first

  (b) then choose 'continue' to install the OS X - at the end, you will be asked few options - recover via Time Machine.

  After the restoration, you can run a few updates so that the system will work like the old set up.

  Most of the software should work, but somehow, some software required "activation key" again.

  Those notorious - Rosetta Stone (language). -J' had to communicate with them, uninstall the old drive first.  Microsoft Office can be too fickle.

  Make sure that OS X are the same version (you can't have 10.11 on Time Machine, try using the boot USB 10.10 disk) targeted installed OS X must be the same or more recent than the OS X version of the time Machine.  For example, if your Time machine backup contains 10.10, then you can either use drive start USB 10.10 and 10.11 for the restore process.

  Sam

• HP Pavilion dv6000 need to reset the BIOS password so I can ennable my wireless network

  I bought a HP Pavilion dv6000 laptop of a friend and you need to reset the BIOS password because she can't remember it... I can't open an internet oonto session due to my wireless adapter is disabled in the BIOS. Can you help me please... Thank you

  Keep trying no matter what password until you get a code of error/halt.

  Then, visit the site below & error/halt code allows to get a master password to work.

  https://DL.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html