Need to update my update in the service pack

Similar Questions

• I have problems with my lap top which is been updated, but the older the other updates to the service pack file is still present?

  My lap top began to play up with the updates of some files windows service pack 3.5 have been introduced, and I tried to speed things up with the removal of some two files old service pack. He struggled with the race, the trash/delete was misplaced, files have disappeared behind a fictitious system restore. I tried to run Mr. Fix it and get the icon cache is indicated as an error of changing icons and does not repair. I'm doing Defrag disk to re - configure the HDD without losing valuable records and continue to get a size of insufficient volume of about 12% to reconfigure the hard drive. I tried to remove some files more since then and things are run faster by removing a lot of material from google. But the restoration of the system was not available to provide an overview of available programs. Is it because that the guest user is the amount of space drive, help or I may need to get a different system not running windows?

  Hi studiosSorohan melodeon,.

  Follow these methods.

  Method 1: Run the fixit of the article.

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-CA/Windows-XP/help/Setup/maintenance-improve-performance

• I have a problem with the installation of the updates to the Service Pack Windows Vista business.

  Original title: Vista Business

  I have vista business installation, I can't install SP1 updates say its installed then it comes as (KB936330) has tried to install SP2, it says install SP1 first. It is a 32-bit is there anyway to put the SP1 that I know he finished in July I think?

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Ignore DO NOT click DOWNLOAD YOU WANT to upgrade a SINGLE COMPUTER

  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  The current time and the date now in Baja California (border region), the Mexico's 03:33

  Saturday, July 6, 2013
  The time Pacific daylight time (PDT)-0700 UTC

  UTC/GMT is 10:33 Saturday, July 6, 2013

  Current weather conditions in Tijuana

  Cloudy64 ° F / 18 ° C

• Is it possible to integrate the service pack 2 for Windows Vista?

  Hello

  I bought a full copy of Windows Vista Edition full in 2007 but I have not yet used.  Since the recent availability of Vista Service Pack 2, I wonder it would be possible to combine or integrate service pack 2 with my Windows Vista Ultimate DVD disc to a new blank DVD disc?  In other words, I would like to create a new Vista DVD installation disc that combines my copy of Vista Ultimate with the new service pack 2. Thus, I would avoid the process laborious and tedious installation service pack 1 and service pack 2 on windows updates.  Or do I need to have a copy of Windows Vista with service pack 1 preinstalled DVD disc before attempting to integrate service pack 2?  Please note that my installation of Windows Vista Edition full DVD disc has no service Pack1 preinstalled.

  I know that this was possible with Windows XP but some kind I've read reports recently that it is not possible with Vista because service pack 2 is not a cumulative update and the service pack 1 must be installed before you attempt to integrate service pack 2.  Is this true?

  I would be obliged if anyone out there can clarify this issue.

  Thank you

  Martin

  Slipstream Vista SP1

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

  Slipstream Vista SP2
  http://www.Vistax64.com/tutorials/230249-sliptream-Vista-SP2.html Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Update cannot currently check the updates, because the service is not running. But it is!

  When you try to run windows update on my win7 box family premium, I get the following message: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. »

  Steps has been involved:

  1. I restarted and even restored to the point when the last update was installed.

  2. I verified that the service is running and checked that there are no errors in the the event log for this issue.

  Any ideas?

  PA bear,

  I solved the problem, apparently, some of the dll files becomes involved in the process of updating Windows and just need to be reassocie but for the analysis patterns below are the answers to your questions:

  1 Win 7 Home Premium installation

  2 64 - bit OS

  3 avast! Full version

  4. no other anti-virus/anti-spyware has never been installed

  5. computer was custom built by me, destructive disk used on a new HDD before installing it so that it wasn't a possibility of always being on the disc software.

  6. I left on deployment (I'm in the army) and when I came back my wife told me that the PC was not able to download the updates since November of last year, so she switched off and left to me when I got home.

  Thanks for the quick reply, I was just in the difficulty that I used while watching a few messages on another Web site.

• Windows XP Professional starts in safe mode after the service pack 2 update

  I have an older version of Windows XP version 1.0 on a computer in November 2001 of the gateway that I have updated all offers updates of material such as BIOS and motherboard.  Then to the service pack 2 update so I can load an antivirus software which does not load unless you have SP2 or later version.  It loads like a champ and restarts, but Windows does not start normally, I have to start in safe mode and remove SP2.  Is there a driver error that I need to find?  Or is there an other update I need before SP2 for such an old version of windows? (He also did the same thing with SP3).  Help!  I tried to reload Windows with the repair feature, but was lost when he gave me a prompt C:\.

  Hello Doug12345,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you

  Input jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Windows Update cannot enabled updates, because the service is not running.

  Original title: update for windows vista.

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Windows Update is not enabled updates, because the service is not running.

  I spent all day trying to update via different methods on different for one without a bit of luck.

  Can anyone help?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner. Delete everything is found.

  Reset.

  Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you:

  • All supported x 86 Windows Vista (32-bit) versions
  • All supported based on x 64 (64-bit) versions of Windows Vista

  Let things run/fix.

  Reset.

  Try to update.

  If it still fails, try the following:

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to update.

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  
  STILL no? We have something to try...

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:

     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
     regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try to update.

  If it still does not work after that - repeat ONCE more that part...

  Reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to update.

  Come back and let everyone know how you faired.

• Windows Update cannot currently check the updates, because the service is not running

  Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.

  Vista service pack 1

  Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz

  Memory: 2.00 GB

  Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you

  Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!

• Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

  Original title: Windows Update service is not running / working and is not listed in services.msc

  When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

  "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

  * Restared several times-nothing has changed

  Despite what other threads have advised to:

  I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

   

  * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

  * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

  * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

  (Nothing is in the update history)

  Am really worried!

  Thank you!

  Hello

  
  Have you made changes on the computer before this problem?
  Method 1:
  You can try to start the fix - it and check. Check out the following link.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2:
   
  You can read the following article.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

• When I try to use the Windows updates to and the following error message: Windows update cannot currently check updates, because the service is not running

  have tried to use windows update and get the following error message: Windows update cannot currently check the updates, because the service is not running. You may need to restart you computer. I rebooted several times. Any help would be greatly appreciated as I am not very computer

  Original title: update windows

  Solution 1:

  Try this: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  Solution 2:

  You can try to stop and restart the Windows Update Service (wuauserv). Open a command line window (run as administrator) and enter the following lines:

  net stop wuauserv
  regsvr32 %windir%\system32\wups2.dll
  net start wuauserv

  If this does not help, try Microsoft Fix It service to reset your Windows Update components:

  http://support.Microsoft.com/kb/971058/en-us

  I hope this helps.

• Unable to do the Windows updates, error "Windows Update cannot currently check updates, because the service is not running.

  Only the news I get is an information box stating:

  "Windows Update cannot currently check updates, because the service is not running." You may have to restart your computer. »

  I checked that the service is running, and a process is running in the Task Manager.

  I have downloaded and run Microsoft Fix, it is said that it fixed the problem, but didn't.

  I cloned my old drive and installed my new drive in my laptop. It seems that there is no update history transferred when cloning, there is no history of updates now.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. The 'leftovers' Norton may be causing the problem. Roll up your sleeves & cross your fingers...

  [You can print these instructions for reference offline. If a step said to reboot, reboot! ]

  ACTIONS

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online enable WF immediately after the reboot!

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in step #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  10 a. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  10 b. do disappear/close the window pop up "Automated troubleshooting"! -then...

  c. 10, regardless of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  11 restart one last time & test by launching a manual check for updates.

  12. in response to this post with a status report - hopefully confirming that all six of the April 6 & March 2012 is installed correctly now.

  ===============================================================
  [1] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en [good for IE9, too!]

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.