Thunderbird will not add addresses for the field in my emails

Similar Questions

• My windows live Movie Maker has an ER code 0 x 80004005, cannot display viedo of camer after down load, that its there just will not be open for the show.

  After down loading the camera viedo, it will not be open for show, but it's there, ER (0x80004005) it says Director windows live how I do to reboot?

  Have a look at the last 3 letters of the video you've imported to Windows Live Movie maker (WLMM).
  That the last 3 letters represent the format of the video file. If the format is NOT supported by WLMM, he won't play it.

  Here are the formats supported by WLMM:
  Video files: .asf, .avi, .dvr-ms, .m1v, .mp2, .mp2v, .mpe, .mpeg, .mpg, .mpv2, .wm, and .wmv

  If your video file format is not on the list above, google for a FREE video converter and it allows to convert your video file.
  The best format to convert is WMV. The most reliable and foo-proof format.

  PS, It might be better if you posted in the section photos and videos:
  http://social.answers.Microsoft.com/forums/en-us/vistapictures/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Media Center: Will not add folders to the library

  For about a week now through yesterday morning, I had several video files put in place in Media Center: specifically, two folders on local and network disks several (five or six) on records.

  Last night, I went to the video library in Media Center, and it was completely empty. Records and all video files are always accessible through the browser and the network as needed, so I go to Media Center and re-add the same folders. Return to the video library. It is empty. I will go back to the library settings and all defined records are previously selected is no longer! So I go through and add them back. Only to make them all disappear.

  I do this several times, including the second to the last test where I waited in circles and looked at the gauge progress and a total number of 300 + video files displayed. But the library is still empty and not setup all files as added!

  So my last try: I remove all other music and image files and add just a video file. And still no videos!

  I already rebooted once and now I am at a complete loss as to what could be the problem. The files are a mix of .avi (xvid, for the most part), .mkv and .ts who worked before this question last night.

  I said that I should leave the Media Centre, stop the windows media player network service, and then remove windows media player db file. I did all this, restarted the service and then media center, added a video file and guess what? Still no file (or folder) in my Media Center video library.

  What is happening here!

  Edited to add:

  Well, I did a few experiences more.

  In Windows Media PLAYER, I wasn't able to add folder to library video (via organize) it is. However, I was able to add folders to the library in Windows Explorer. I could then drag and drop the Windows Explorer video library in WMP. However, none of this has changed the fact that the video library in Media Center remains empty and I can not add ALL the video files via the parameters.

  In the meantime, I have two choices, I can browse my multimedia files via WMP which is not half bad but I prefer reading via Media Center. so... currently, I navigate through Explorer Windows and Media Center set as default player for all types of video file in the video library of the Explorer.

  However, I would really like this work all through (some) Media Center :)

  I wonder if there might be a corruption of the current library which is not resolved by simply removing the CurrentDatabase_ # .wmdb as suggested earlier.  You see the question even if you plan to display this content in Windows Media Player as well?  If so, in Windows 7, there is an option to rebuild the library.  This is done through Windows Media Player tools > advanced > restore library... menu (an open area along the top or bottom of the drive to find this right click menu).

  Thank you

  Chad

• WRT600N - Wireless MAC Filter Table will not retain MAC for the Droid 2 phones

  Hello

  I have a Linksys WRT600N router and I succumbed adding our new Motorola Droid 2 to the MAC table on the Wireless Security tab.

  It allows access if I disable MAC filtering wireless and appears on the list of clients, but when I try to add the customer list or manually enter the MAC table, it does not retain it when I save it. The only thing that seems different from the MAC standard is the 1 byte

  (F8:7 B: 7 A: 76:98:22 is the MAC of my phone).

  I don't want to leave my network open and prefer to avoid using a WEP key if possible.

  Can anyone tell me what I am doing wrong or is this a bug? Y at - it a firmware update I have to apply to this effect in my MAC filter (current version is 1.01.36 build 3)?

  Oh and I'm not worried about hackers if as much as deterrence of neighbors stealing my bandwidth. To implement the keys on all my devices was too much time to consider unless a last resort. MAC filters make it also easier for me to add guests fairly quickly.

• Signature will not be printed for the recipient

  My financial adviser recently sent me a PDF file to fill in, sign and return. I use Acrobat Professional CS4 (MacPro Tower, OS/10.6.2) and completed the necessary lines using the typewriter tool. I then used the Acrobat stamp tool to place my signature scanned on the appropriate part of the form. Save the file and sent it back.

  When she opens the file she sees all my additions whose signature, but when it tries to print a paper copy, the signature disappears. Is there some security settings in the document that I need to reconfigure or is the problem on his end? In the properties of the Document-> security method, method is set to No security and summary bed allowed for all ten options.

  Additional info: it is on Windows, but I sent the file to a friend of my Mac club and he had the same problem: given everything I added, but the signature do not print. Prints very well here at home. That's why I'm convinced it's some setting document on my end requiring an alteration.

  The person printing must make a choice. Document, Document and annotations and comments, Document and paper, stamps, only form field.

  

• PC Win7 will not add the mp4 files to the iTunes library

  iTunes will not add .mp4 movies at the library on PC Win7 (v.12.3.1.23).  Movie exact same .mp4 files are able to add in my iMac running iTunes 12, someone else has experienced this problem?

  In some cases with 64-bit systems, you may need to install the version of iTunes for Windows (64-bit-for older video cards) and QuickTime to enable iTunes work with videos. 32-bit users must install QuickTime.

  TT2

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on.

  Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on. Help?

  You should contact the provider of the Add on in this case.

• I will be able to cancel my subscription to Photoshop after 1 month and not to pay for the rest of the year?

  I got only 1 month out of the second year of University and will buy Adobe Photoshop for use at home at the moment. I will be able to cancel the subscription once the 1 month is over and not to pay for the rest of the year? I read that they take 50% of the years cost you? Thank you!

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Cannot figure out how to "add-in" for the 2013 Outlook application... said the loading behavior is not loaded. How can I fix it?

  Cannot figure out how to "add-in" for the 2013 Outlook application... said the loading behavior is not loaded. How can I fix it?

  Hi amandab9126792,

  2013 Outlook does not work with Acrobat X because they are not compatible. Please check the compatibility to https://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html.

  Kind regards

  Nicos

• Windows Fax and Scan will not add an account to my internal Fax Modem

  I tried all the work around listed Forums and Windows Fax and Scan will not add an account to my internal fax modem. The Modem is recognized by Windows 7 and test very well. I am running Windows 7 Professional 64 bit.

  Hello michgaud,

  To set up a fax server

  1. Before you begin, make sure that your computer is connected to the network and you know the network address of the fax server (for example, \\mycompanyfaxserver).

  2. Click the button start , click programs, and then click Windows Fax and Scan.

  3. To use the fax mode, click fax at the bottom of the left pane.

  4. Click the Tools menu and then click Fax accounts.

  5. Click Add, and then, in the Fax Configuration Wizard, click on connect to a fax on my network server and follow the instructions.

  Check the following settings:
  In Windows Fax & scan settings, open tools/Fax and under the general tab.
  Look at the 'Fax select device".
  Your modem is listed here?
  You have the, "allowed to send and/or receive" selected?

  This setting should be checked and selected until all accounts are created.

  You can watch the post following TechNet with a suggestion that might help with your problem.
  http://social.technet.Microsoft.com/forums/en-us/winserverprint/thread/18a5dba1-1bc5-49EB-923A-b81958e80727

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Set a static IP address for the printer

  One of the most common steps given when members of the community have printers that will remain not connected is affecting the camera a static IP address. Most of the members to respond to messages will include a document that's going to work on the steps and it is very useful. I found a video which will also show you this process on a printer Photosmart 7510.

  It will go well to enter the IP address of the printer in the web browser and access the built-in web server (EWS). Once in SAP, it shows the path to take to set the static IP address for the printer.  I thought it would be a good video to share with the community so that there is assistance available for those of us who are visual learners. Here's the video promised on the static IP address.

  I hope this helps the community. Good impression to everyone!

• Help with static IP address for the WRT54GL by EZXS55W

  Hi all!

  I'm having some trouble network at the office and cannot keep close internet for all the world just try a new mode of connection of the cables.

  We recently received a notice on five new static ip addresses for the office, we did turn on DHCP those for a year now.

  We have a basic network requiring no credentials of the modem or connection.

  At this moment we have a network cable straight from the network on the router (WRT54GL) failure. Then, the router is defined in gateway mode and uses one of our static Ip addresses.

  I wanted to connect my server to the same fault, but using the static IP address, so I thought why not do it through a switch.

  So the network failure, I ran the right network cable into the uplink on the switch (EZXS55W) connector and then put the router in port 1 and my server port2. Both connected with the right cables.

  The Internet light on the router does not light and the switch just flicker light now and then.

  Maybe someone here can help me how I should put up to get to the top and running, what do I have to configure something special on the router or maybe somewhere use twisted cables.

  Please I need your help!

  Thanks for the help and you where once there was something wrong along the way.
  I tested my switch before trying this, but apparently it is now broken.
  I borrowed another switch of a friend and everything was up and running in a few seconds.
  So now I just need to buy a new switch and everything will be fine.
  Once agan, thank you...

• Not able to see the fields within a custom resources optimization

  Hi all

  I am not able to see the fields within a custom value.

  Here is my code for the custom resource optimization:

  public class CustomContentContainer extends VerticalFieldManager{
  
      String content_header;
      int container_height;
      int displayWidth = Display.getWidth();
      int displayHeight = Display.getHeight();
  
      public CustomContentContainer(String content_header,int height){
          super(Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL);
          this.content_header = content_header;
          container_height = displayHeight-height;
      }
  
      protected void sublayout(int maxWidth, int maxHeight) {
          super.sublayout(maxWidth, container_height);
          setExtent(maxWidth,container_height);
      };
  
      protected void paint(Graphics graphics)
      {
          int X_POS = 20;
          int Y_POS = 20;
  
          int width = displayWidth;
          int height=container_height;
          int[] xPts = {0, width, width, 0};
          int[] yPts = {0, 0, height, height};
          int[] colors = { 0xffffff, 0xf7f7f6, 0xd4d0cc, 0xb0a9a2 };
          graphics.drawShadedFilledPath(xPts, yPts, null, colors, null);
  
          graphics.setColor(0xc0c0c0);
          graphics.drawRoundRect(X_POS, Y_POS, getWidth()-40, container_height-40, 10,10);
  
          int stringWidth = getFont().getAdvance(content_header);
          graphics.setColor(0xF8F8F8);
  
          graphics.fillRect(35, 5, stringWidth+10, 30);
  
          graphics.setColor(0xFF0000);
          graphics.drawText(content_header, 40, 5);
      };
  
  }
  

  Here is the Code inside the class from the main screen

  settingsContainer = new CustomContentContainer("Settings",vodavaultLogo.getHeight());
          contentContainer = new VerticalFieldManager(Manager.VERTICAL_SCROLL|USE_ALL_WIDTH);
  
          passwd1 = new CustomEditField();
          passwd2 = new CustomEditField();
          contentContainer.add(passwd1);
          contentContainer.add(passwd2);
          contentContainer.setMargin(35,35,35,35);
  
          mainContainer.add(vodavaultLogoField);
          settingsContainer.add(contentContainer);
          mainContainer.add(settingsContainer);
          add(mainContainer);
  

  You must call the super.paint (.) in your paint (...) optimization of resources, if you paint all areas which are added.

• HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  try to download the latest driver Package HP from Apple here:

  http://support.Apple.com/kb/DL907

  Install the package.

  Reset the printing system.  And add the printer with the new driver.

  Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.

  To reset the printing system do the following:

  1. open System Preferences
  2. click on Printers & Scanners
  3. right click or control click in the list box for the current print queues.
  4. Select the Reset printing system...
  5. enter admin user name and password
  6. restart the Macintosh
  7 try to set up the printer again