. NEF RAW in PES 11 file will open directly in edit mode

Similar Questions

• former Illustrator files will open only in the form of Simple Text Documents

  I went back to an old project Adobe Illustrator I have not opened for years but suddenly need to recovery. To my horror, I discovered that I can not open ONE of these old files HAVE. In the finder, each of these files is shown not as an .ai file, but as a "simple text document. When opening, it does is display a text code page, not my graphics HAVE. I'm currently running AI CS5 on Mac OSX 10.8.5. I would greatly appreciate all useful advice - what someone might have on this subject. Y at - it HAVE a plug-in available for update old files? No matter what?

  Thanks for your help!

  Frank Gresham

  Hi everyone who responded, or interested:

  I think I found the fix, courtesy of the Mac guru at the University where I teach. If I just add the suffix .ai on behalf of all of my files, they instantly change to read Adobe Illustrator files! Couldn't be simpler, although it raises a question. These files will open very well without needing to be done with the file at the end of each title designations. Now, suddenly, they need ".ai" after them to open properly. Well. At least, I have a solution to this problem.  Thanks for all the good advice!

  Frank G.

• CS1 files will open in the later versions of CS, such as CS4 and 5?

  I'm still working in CS1, but becomes nervous about the March of time with Creative Suite. I don't know if future versions of the CS will be open my files, in particular Photoshop and InDesign files. I'll appreciate sincerely any info on this.

  I have a mac G5 running Tiger. (I realize I cannot use CS5 with it, but I'm always interested to know if my files would be toast with CS5 or feasible if I had a Mac Intel.)

  Yes, these files will open in the new versions of the same applications.

  -Dov

• Regedit, nor any .exe file will open

  I got the xp antivirus pro 2010 virus earlier today. I went through regedit and delete every registry entry associated with him... not the best move. Now im certain antivirus xp pro 2010 is totally removed from my computer. But now, I can not run any .exe, .reg file file, or Open regedit...

  any help?

  It's extremely likely that your computer is clean and who knows what you deleted in the registry. The most practical thing and time-effective to do would be to backup your data and do a clean install of Windows. If you don't want to do that, then either mail to one of the following specialized forums take your computer to a qualified local professional GOLD. This is not a type of BigComputerStore/GeekSquad of the place.

  http://www.elephantboycomputers.com/page2.html#HJT-links

  Choose one of these forums, register and read his FAQ display. PLEASE DO NOT DISTRIBUTE NEWSPAPERS IN MS FORUMS
  MS - MVP - Elephant Boy computers - don't panic!

• Is there a way to open a VI editing mode, within another VI?

  I'm looking for a way to open a VI within my application in edit mode.

  I tried to use secondary for this, but it won't let you edit the Panel before VI you opened and if you open the block diagram that it appears in a new window. I want to just be able to essentially incorporate the editable inside my application VI?

  Anyone know of a way or ideas?

  Thank you!

  Well, the Windows API has functions to set the parent of a window window. An example can be found in this thread. I don't know if this will be enough for what you're trying to accomplish.

• opening of VI editing mode gives 60% CPU usage

  I noticed that in this project Im working on Labview was slow when connections and of the son, and others.  Check with Task Manager shows

  60% of load on the processor. When I close the VI and open another there is no sensitive load (like 6%). What is going on? It is in edit mode, if it is not running.

  Edit: When its operation, its normal CPU usage showing as a small percentage. See the attached diagram.

  

  I immediately knew what was wrong, because this asschapper got me dozens of times. Import you a custom chart and then tried to paint is transparent. Use the tool to redefine colors to make your CPU down to 0%.

  Photo below shows that I can recreate the issue

  

  Watch the part that goes haywire:

  

  After recolor, I revealed your first custom chart and solved the problem. In the future, to create a custom control or an indicator component, import a flat decoration that has been coloured Transparent/Transparent.

  

  Thank you, altenbach, for the heads up in the Bugs Thread. I would love to see this bug fixed, because it's particularly unpleasant when it manifests itself only in the built EXE but not the dev environment.

• Error opening edge in edit mode in Essbase 11.1.2.3

  Hello

  I know this question has been asked by couple of people in this forum but no response specific to the EMP 11.1.2.3 issue.

  We are in the process of transition of 11.1.2.1 to 11.1.2.3 Hyperion planning environment, where I see the mistake of opening of contour essbase in edit mode.

  I am able to open in view mode but error - "there is a problem with the schema object, error in edit mode for locking

  I stop/start the application several times... no luck... also dropped and re-created essbase app to create and refresh planning but no luck.

  does anyone have a solution for this?

  Kind regards

  KP

  Take a look at error opening outline of the database in "Edit" mode: 'There is a problem with the locking of the schema object, error # 1 051 675' (Doc ID 1491030.1) to see if that helps.

  HTH-
  Jasmine

• [JS] TextFrame opened in 'text-Edit Mode '...

  Hey guys,.

  I use Javascript and InDesign CS4. And my simple question is how can I open

  a textframe in edit mode for the user?

  THX!

  myTextFrame.parentStory.storyEdit ();

  @+

  Marc

• None of my files will open

  I deleted some toolbars and now none of my files opens. A box appears and says windows cannot open the file, and you must know what type of program created the file. System Restore did not work. Without file extensions will be opened. Help, please!

  Hello

  Done began just after the removal of these toolbars?

  Have you tried the .exe attachment file associations?

  fixed .exe file association.
  http://www.dougknox.com/XP/fileassoc/xp_exe_fix.zip

  CleanAutoRun.
  http://support.Kaspersky.com/FAQ/?QID=208281743
  http://support.Kaspersky.com/viruses/cleanautorun

  Let us know if the problem persists.

• HELP: .exe files will open in Windows Media Player

  Yesterday, I did something with my computer and now it opens all .exe files in Windows Media Player. This means well enough that I can do anything. When I click right a .exe program, it does not say "open with...". ». SystemRecovery does not work either. Please help me solve this problem

  Salvation of Daniel,

  Try the steps in this article

  Change the programs that Windows uses by default

  http://windowshelp.Microsoft.com/Windows/en-us/help/6ef5399f-a0b6-4133-AC76-41cda36b1ca21033.mspx

  Hope will fix your problem, please post back and let us know ok.

  JohnD
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my .exe files will open in the same program, how can I solve this problem?

  I double clicked a .exe program and she appeared with an error saying that it was not a correct path, so I right click on it hung over 'Open with' clicked "choose program by default" found and selected it clicked OK, and I don't see the "Always" use the selected program to open this type of file until after I clicked OK , but now all my .exe programs open the same and the .exe .lnk changed, I was about to restore my computer to the previous version, but none of them go back far enough, what should I do to cancel the default program?

  Darn, I was hoping that the registry itself would correct after a reboot. I always try to this for you. Following is a somewhat similar to what was posted by hetti:

  http://support.Microsoft.com/kb/950505#LetMeFixItMyselfAlways
  However, this does not mean you're going to in the registry. You create a file that will do the registry work for you. According to this link, the fixittool only works for Vista.
  Do you like try our suggestions. Let us know how it goes.
  Alamo_07

• All .exe files will open with registry Editior

  Original title: programs try to open with the registry editor

  I tried to have one of my games open with the appropriate emulator and it changed all my .exe files. I tried to fix it, but I did, some have all programs to open it with the registry editor and now I can't open anything unless I find another way to do this. help would be appreciated.

  Hello

  Were there any changes made on the computer before the show?

  This problem may occur when you accidentally change parameters of type for the file .exe in Folder Options. Sometimes it can happen because of the virus also.

  Method 1:
  I suggest you try the procedure described in the link and check if it helps.

  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Method 2:
  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  For more information, please see the link.

  When you open a file on a Windows-based computer, the file may start another program
  http://support.Microsoft.com/kb/2656106

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  I hope this information helps!

• No .exe file will open.

  My friend's computer had a virus pop up. I used malwarebytes to remove it. Everything is normal, except that every time I try to open a program with the .exe, windows says "what program you want to use to open this file? For example when I try to open internet explorer, I get this message, then a list of programs of your choice. I choose internet Explorer in the list, and then I get the dialog box that says: "do you want to run or save this file?" (iexplorer.exe). I click on run, and I get the message "this program would you use to open this file?" again, goes in a cycle. The computer is a fairly old Dell, but it is not getting used a lot except for facebook, and probably _ (where the constant malware it gets).

  Hey got a fix. I used a .reg file to the executable fix. Save ALL text below in a .txt file, then change to. Reg. name it whatever you like and add to the registry:

  Windows Registry Editor Version 5.00

  [- HKEY_CURRENT_USER\Software\Classes\.exe]
  [- HKEY_CURRENT_USER\Software\Classes\secfile]
  [- HKEY_CLASSES_ROOT\secfile]
  [- HKEY_CLASSES_ROOT\.exe\shell\open\command]

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"

  [HKEY_CLASSES_ROOT\.exe]
  @= "exefile".
  "Content Type"="application/x-msdownload".

• "all my .exe files will open with ie" my bad gestures "and I can't restore default settings

  What iam I missing besides a brain?

  Hello

  When you double-click a. EXE file, the program may not start, instead, it can open in Notepad
  (view the contents of .exe), or you can jump into any other application.
  http://WindowsXP.MVPs.org/exeasso.htm

  Restore the .exe Windows Vista file association, after badly with another application
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• .xls files will open with IE. Need to change file association, but excel does not appear as an option.

  Excel files are currently set to open with internet explore as default. I went to change the file association, and although my copy of excel is fully licensed and operational, excel does not appear as an available program. Has anyone experience this problem? Thank you.

  Right click on a .xls file and choose open with > choose default program. Then click Browse.

  Navigate to C:\Program Files\Microsoft Office or C:\Program Files (x 86) \Microsoft Office for 64-bit Windows versions.

  Here is an office folder. Office12 for Office 2007 and Office14 for Office 2010. Go in the right folder and thin Excel.exe.