AAA authentication as user name failed

Similar Questions

• Diagram of authentication with user name / password stored in the Table of the App

  Hi all
  
  So far, all of our applications have used sign-ON, but I have now spread to allow users from outside of our Organization (and so not in our system OID) to use a specific application.
  
  So, I have a table in my application that stores the user name and password. I have a function that compares the input of user name and password at this table and returns a Boolean result. This function is then entered in my scheme of authentication as the authentication function.
  
  This works well and is causing no problem. The problem is that the password is stored and verified to plain text - not very good lie.
  
  How can I do to change the password of my table column, pages which allow the password to be updated, and authentication which checks the user name / password to use a form of encryption?
  
  Also, do I need to worry about all the other fields (Page Sentry function to check the authentication session, prerequisite process etc.) that the authentication scheme can offer me - or can I just leave these virgins as they are now.
  
  If someone can give me a complete "out-of-the-box" solution that would be wonderful - otherwise a good hard pusj in the right direction would be much appreciated.
  
  Thank you very much
  Martin

  Hello Martin,

  If you discover here the application of Discussion Board, you should find the information you need. This application stores an encrypted version of the password of the user in the table.

  http://www.Oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#Forum

  Good luck
  Don.

  You can reward this answer by marking as being useful or correct :)

• local user name and password if the ACS server fails

  Hello

  I have every router and switch configuration for authentication of the connection via the ACS server.  I used these 12 lines below and it works very well.  Each engineer has their own account.

  AAA new-model
  AAA of default login authentication group Ganymede + activate
  the AAA authentication enable default group Ganymede + activate
  AAA authorization exec default authenticated if
  AAA authorization commands 15 default group Ganymede + authenticated if
  AAA accounting exec default start-stop Ganymede group.
  orders accounting AAA 15 by default start-stop Ganymede group.
  Default connection accounting AAA power Ganymede group.
  AAA - the id of the joint session

  RADIUS-server host x.x.x.x
  RADIUS-server application made
  radius-server key, regardless of

  ----------------------------------------------

  I would add to this a local username and password so that if the ACS server was offline engineers have yet to connect with a knowledge of username and default password

  username privilege 15 secret mypassword MYUSERNAME

  line vty 0 4
  local connection

  Q. How do I make ACS a first preference and connection server only local users username and password if the ACS server is down?

  Kind regards

  Kevin

  Now you have the password to enable as the fall back method:

  AAA of default login authentication group Ganymede + activate

  Change 'enable' for 'local' and the local (to the router) database of user names and passwords is used.

  The same works to activate authentication (the second line "authentication, aaa... ("in the config that you posted).

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• You are about to open a session "keiron.me.uk" with the user name "Gerry" site, but the site requires no authentication. Maybe it's attempt to deceive you.

  http://Keiron.me.UK

  This very annoying message what I select my site

  You are about to log on the site "keiron.me.uk" with the user name "Gerry", but the site requires no authentication. Maybe it's attempt to deceive you.

  It is ok with Internet Explorer

  To resolve this problem, simply is to remove all bookmarks you have to keiron.me.uk and then re-create by vising the site by typing the address directly into the address bar.

  If you want to manually fix it then, check the properties of the location of all bookmarks that you have for keiron.me.uk. It is probably similar to http://keiron:[email protected] remove the keiron:password @ section and the dialog box should not appear again.

• Using the network authentication Windows 7 name of user and password to connect to a network (internet access)

  When I try to CONNECT to my network, I get a window of security Windows network authentication requires a user name and password. I have no idea this here. Apparently until I find it I will not be able to connect wirelessly to the Internet

  I assume you are using Windows 7 and trying to connect to the wireless network? There are many discussions here for precisely this question and answers not very unhelpful.  Have you tried to manually add the wireless network and select Connect automatically?   This seems to have solved my problems.

  1. open network and sharing Center (click on start - Control Panel - Network and sharing Center)

  2. click on manage networks wireless on the left side and opens a new window - manage wireless networks that use (wireless)

  3. click on add

  4. click on add a network profile

  5. Enter the name of the network - security Type and security key (this info should be provided by your internet service provider)

  6. check the box that says "Connect automatically when this network is in range" and click the next button

  7. click on the close button in the next window that opens (or you can take a look at the settings, if you like, and then click close)

• Windows 7 Home Premium - cannot change the user name in the authentication dialog box

  I was hoping someone might be able to answer a question on how to get a computer running Windows 7 Home Premium to display both the username and password fields when attempting to authenticate on another Windows computer.

  Here's the situation: allow us that the leaders and other members of the staff allowed our Organization to establish a VPN connection to our corporate network (via Fortinet Forticlient, for what it's worth.)  Once the VPN connection is established, on the remote computer, the user must be able to access the UNC path to our file (\\servername\share) server.

  Because the remote user has not yet authenticated on the domain Active Directory of business, a dialog box should appear to the user input a user name and password.  Enter the user name (domain\username) and password and share should open, and the user must then be able to access the files in the share.

  I (and several other members of the staff) have been using this method successfully to access files via the VPN connection, and it works very well.  However, it does not work whenever the President of the company will connect to the VPN from his computer at home.

  Whenever the President connects the VPN and attempts to access the UNC path, he reports that the dialog box which appears on his computer at home has only one field for a password; the user name field appears to be on his local user account, and it doesn't have the ability to change.  (I have him asked if there is an option 'use authentication information', and he declares that there is not just a dialog box with a single field, the field of password.)

  The President is running Windows 7 Home Premium on his computer at home, so I thought that the problem could be because he was running this edition of Windows.  However, I have installed VPN client and test the connection on the server share file using the computer of my wife, who is also running Windows 7 Home Premium, and I received the two fields as expected authentication dialog box and has been able to authenticate to the domain successfully and open files from the share with no problems.

  Does anyone have recommendations on what I can try to allow the President to authenticate successfully to our server share?  I am confused, and it is eager to be able to get remote access to files on his home computer.

  Hello

  Please contact Microsoft Community.

  I suggest you to ask your question in the Technet Forums, where we are the support technicians who are well equipped with the knowledge on these issues. Please visit the following link to go to them and post your query there:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Have a great day.

• Message - "network authentication - please enter your identification information. I don't know the user name or password.

  I recently got my samsung laptop wiped to speed it up and it has updated since windows xl to windows 7. However when I now click on my wifi tab windows security pop with the "network authentication - please enter your credentials" and ask for my username and password. I don't have any idea of either that I've never had a password that I know... can anyone help, really need my laptop with College work editing! Thank you

  Moved from feedback

  Original title: don't remember my user name or password

  Hi EoinFarrell,

  For many users, this problem is resolved by following the steps below:

  Step 1

  Try to turn off password protected sharing and check.

  (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  (b) to expand your current network profile, click the chevron.

  (c) under the password protected sharing, select the following:

  (d) turn off password protected sharing

  (e) click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information:

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Step 2

  Try to add manually the wireless network and selected will automatically connect.

  (a) open network and sharing Center (click on start - Control Panel - Network and sharing Center)

  (b) click on manage networks wireless on the left side and opens a new window - manage wireless networks that use (wireless)

  (c), click Add

  (d), click on add a network profile

  (e) enter the name of the network - security Type and security key (this info should be provided by your internet service provider)

  (f) check the box that says "Connect automatically when this network is in range" and click the next button

  (g) click on the close button in the next window that opens (or you can take a look at the settings, if you like, and then click close)

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

   

• Confusion of AAA - user name local access

  Hey all,.

  I'm a bit confused.

  I have the following commands on my device:

  username privilege 15 secret 5 bla blah!@#$%%

  AAA new-model

  AAA authentication login default group Ganymede + local

  the AAA authentication enable default group Ganymede + activate

  AAA authorization config-commands

  AAA authorization commands default Ganymede group 0 +.

  AAA authorization commands 15 default group Ganymede + local

  AAA accounting exec default start-stop Ganymede group.

  only AAA 0 default stop accounting controls group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  Everything works fine.

  However when I bring the RADIUS server that I am able to connect to the device with the local username, but it fails when I enter the enable command. How can I access when emergency that GANYMEDE fails? I did research online and have tried several commands. Is that all that I'm missing? I have a password configured thus enable secret. But don't even have a chance to enter. arriving at the "in" to > prompt:

  % Authentication failed.

  Thanks in advance for your help.

  My essay has led to frustration.

  :)

  Hi Geo,

  First of all, please give the back fall 0 control method.

  AAA authorization commands default Ganymede group 0 +.

  Add local

  AAA authorization commands 0 default group Ganymede + local

  Make sure you put in right enable password, try to reset it and give it a shot.

  If it is then get Ganymede debug output and debug aaa authentication

  Kind regards

  ~ JG

  Note the useful messages

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.

• Pre filled with user name in the window of windows authentication.

  Hello

  I hope someone can help me!

  I'll put up the Single Sign-On, but do you have a problem, which is a right pain! because of duty capture the screens that need to be the same each time as the users to enter password.

  I am trying to use SSO to treat the identification information to users through a window of Windows authentication, I want windows authentication for prompt as the way it's Setup is using a generic account to log on locally to the machine but then access intranet and applications users will be run as the credentials of domain users that they authenticate with Single Sign On by connecting to the application.

  I got all applications work, but the problem is when the local generic account accessed sharepoint authentication in sharepoint (as its supposed to do), but in this case I don't want to do, so I put the home page for this local account for the access denied page of sharepoint to force authentication of users. so everything what I need to do now is to remove the part where he waits just a password and just having use another area account instead.

  Bit of a strange setup I know but if I can get around this problem the journal, password management and user switch will be a great improvement for our users.

  My question is where the username is pre-filled how to remove it or default so that using another account field becomes active?

  Thank you.

  

  Thank you for your response.

  This problem is better suited in the TechNet forum we have a dedicated team to help you with this question, I suggest you post your query on TechNet forum.

  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

• Failed to start, error message - the user name or password is incorrect

  Original title: Windows key + R no solution

  I tried the suggested solutions winkey and none work. What I did is updated. To restart the computer it does not start starting System. It gives me the error message the user name or password is incorrect. I have nevrr had to use a password at startup.

  Hi Dolores,

  Thanks for posting your query on the Microsoft Communities.

  I understand that you cannot start Windows after you install an update. Let me try and help you with this question.

  1. What is the brand and model of the PC?

  2. what solution did you tried to use the Windows key + R?

  3. how many user accounts are defined on this computer?

  4. is this a child account?  The thread is in the parental controls category.

  5. I understand that you have not set a password for this account, but requires you to enter a password when you're on the logon screen?

  Check if you are able to start safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  If you are able to start safe mode, and then try to perform a System Restore from there.

  If you are not able to start safe mode, then I suggest you go to the Windows recovery environment and perform a system restore.

  http://Windows.Microsoft.com/en-us/Windows/what-are-system-recovery-options#what-are-system-recovery-options=Windows-7

  Let us know the result. If you have any other questions, we will be happy to help you.

• Web Access: Login failed due to a bad user name or password

  What is the default user name and password to connect to the Web 2.0 Server access.  I had it installed on XP x 64 and was able to access.  Installed Vista Ultimate x 64 and I am not able to connect to web access with my user name and password for XP.

  The user is the local administrator for your host PC user.

• banner of AAA authentication

  I have configured the banner authentication aaa and aaa fail message on a router running 12.1 (15) - authentication is done by ACS 3.0.2 which works very well.

  Problem - the banner of authentication does not appear (nothing is outside of "username:"-don't not even 'check' user access) If you enter a wrong password, but the failure message. If I console in and unplug the interface while the two messages very well.

  Workaround solution - if I set up a connection "banner" then everything works fine too, but I can't work out why does not display the "banner of aaa authentication."

  I suspect ACS prevents the message, but I can't work out how - can anyone suggest a solution?

  Thank you very much!

  By the way that the command "radius-server administration '? It doesn't seem to be documented, and it has no effect or not.

  The banner command does not work if you make the RADIUS authentication, it will not work if you do a RADIUS/local/etc. This is normal, cause with Ganymede you can have the sending server banner and guests down (even if with all I don't think that you can do) and so if you have configured authentication GANYMEDE the router does not take into account the banner command and waits to see if she gets a new one from the server RADIUS itself. If it is not it will simply display the usual guests.

  As for the 'radius-server admin' command, honestly, I have no idea, never seen anyone use. Online help says "start the daemon of Ganymede management administrative messages", but what really I don't know, maybe someone else can help.

• the AAA authentication enable default group Ganymede + activate

  I implement CSACS 4.0. First of all on the client, I will apply aaa authenticatio / authorization under vty. The issure if I use the followin command

  the AAA authentication enable default group Ganymede + activate

  What happens if I connect via the console? I need to enter a name of user and password?

  Here is my configuration

  AAA new-model

  Group authvty of connection authentication AAA GANYMEDE + local

  the AAA authentication enable default group Ganymede + activate

  authvty orders 15 AAA authorization GANYMEDE + local

  RADIUS-server host IP

  Radius-server key

  Ganymede IP source interface VLAN 3

  AAA accounting send stop-record an authentication failure

  AAA accounting delay start

  AAA accounting exec authvty start-stop group Ganymede +.

  orders accounting AAA 15 authvty power group Ganymede +.

  AAA accounting connection authvty start-stop group Ganymede +.

  line vty 0 15

  connection of authentication authvty

  authorization orders 15 authvty

  authvty connection accounting

  accounting orders 15 authvty

  accunting exec authvty

  Any suggestion will be appreciated!

  It should work because it is a guest message.banner whenever you try to connect (console/vty). I set it up on my router.

  If you have banner motd, it will appear as well (see below). So, I have to remove it to get only the aaa banner & prompt is displayed:

  ************************************************************

  Username: cisco, password: cisco (priv 15f - local) *.

  ************************************************************

  Any unauthorized use is prohibited.

  Enter your name here: User1

  Now enter your password:

  Router #.

  The configuration more or less looks like this:

  AAA new-model

  AAA authentication banner ^ is forbidden to use CUnauthorized. ^ C

  AAA authentication password prompt "enter your password now:

  AAA-guest authentication username "enter your name here:

  Group AAA authentication login default RADIUS

  local authentication AAA CONSOLE connection

  HTH

  AK