NEITHER 6009 LED is OFF when connected the circuit feeding

Similar Questions

• The blue windows screen Driver_irql_not_less_or_equal 7 when connecting the LAN cable?

  Hi all,
  I just want to ask how to solve Driver_irql_not_less_or_equal windows 7 blue screen when connecting the LAN cable?
  pls help me...
  Thanks in advance...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)

• My labtop sound works, but when connect the headphones does not work

  My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

  Hello

  ·         Are these USB headset or headphone jack analog standard?

  ·         What version of the operating system is installed on the system?

  If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

  Method 1:

  Step 1:

  You can check if the headphones are activated as a playback device. To do this, see the following steps:

  (a) the Pearl-click Start and type Sound in the start search box.

  (b) in the Start Menu Options, select change adapter settings .

  (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

  (d) select headphones and select

  Step 2:

  Also try to put headphones of default device and check, follow the steps below.

  (a) go to Start and click on Panel.

  (b) click Sound, and then a new window will open.

  (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

  (d) now check if headphone is listed there and right-click on it and choose activate.

  (e) highlight this helmet and click on "as default'.»»

• Iconia tab 7 A1-713. There is no 'restart' menu only "turn off" when press the button / stop

  Hello, is there no 'restart' menu on the screen when pressing the power since bought button tab. It displays only a menu of "turn off." How to solve this, please. Thanks anyway

  I can't find info on a restart in the menu stop although it would make sense.

  If she was here before, then you have EVS data and do a Factory reset.

  http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...

• 4215 Java error: when connecting the IPS Event Viewer

  Hello-

  I got a java error trying to connect to my 4215 with Cisco IPS event viewer. It's as follows:

  IOException in Subscription() open: java.security.cert.CertificateExpiredException: NotAfter: Sunday 29 March

  The web server is running on 10.x.x.x:443? Please check the settings of the device communication.

  I can set the date on my pc to last week and everything works very much like b4. I tried to update my java to the latest version and created a new certificate of IPS.

  Any help would be greatly appreciated:

  Thank you

  Hello

  The problem can be solved by following the steps below

  1. connect the sensor.

  2. run the tls - generate the command key.

  3. make sure that the certificate is generated.

  4 Add the device again. It should work now.

  Ref: http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/products_qanda_item09186a008025c533.shtml

  Whether she helped.

  Concerning

  Sridhar

• OfficeJet Pro 8600: Officejet Pro 8600 leaves black lines on docs scanned when using the document feeder

  This is the second HP Officejet Pro 8600 I had - one was replaced by HP, after that the same issue arose.  I tried to clean the entire unit, but we still get a thin black line running vertically down the page.  This line is divided into sections of 1 "and 2.5" in length.  Sometimes I get the fine line and then almost a shadow line that is parallel.

  Any suggestions would be very appreciated I have scan documents to PDF format and it's hassle to put everyone on the flat for scanning.  I use the charger of the doc on a daily basis and wonder if this could have something to do with the lines.

  Thanks for any help.

  The question is a spec on thin (~ 1 "wide) glass to the left of the main bed scanner.  Clean this area as described in this document.  It can be difficult to see the affected area, a bright flashlight which is held at an angle to the glass can help find the place.  Even a very small spec on the glass can cause a black line when using the ADF.

  

• Laptop screen will stay off when connecting to an external monitor

  I have a laptop Acer Extensa 5430 and when I connect an external monitor to the laptop screen remains. I used the Fn + F6 key to turn off the screen of the laptop but it turns shortly after that I turned it off. I searched a lot of blogs and not yet able to understand this. Any help would be appreciated. Thank you

  PROBLEM SOLVED, go to the Windows Mobility Center, then click on connect display, then check external display only.

• No sound when connecting the Macbook Pro to ext speakers.

  I have a MacBook Pro (retina, 15 ", mid-2014) running OSx 10.11.6 (El Capitan).

  It has a combined audio port 1/8 "for two speakers and a microphone. The internal speakers work very well and the port works very well with a helmet. What does not work must connect external powered speakers like the computer speakers or the port on a radio. It worked perfectly with all other computers that I have ever owned, and judging from the page linked below it should work for this computer, too, so what's the problem?

  Connect your Mac to a Hi-Fi, iPod, iPad, musical instruments or loudspeakers - Apple Support

  I tried it with a 1/8 "cable this single sound of the door (no tape for micro), and (when it does work), I tried to first insert an adapter that split the audio and microphone, but it does not solve the problem.

  How to make this work?

  I found the problem. When I plugged a cable into the headphone jack, the Mac automatically turned to the low volume - assuming I have connect headset. This is why I couldn't hear it. I open the sound applet in the system area and pushed back the volume of output to the top and voila - fixed.

• Power led turns off when I play games

  Hello

  When I play games, my AC adapter is plugged in, everything works well, but sometimes without any reason the power light turns off, but In DC is still on. I reconnect the adapter and all is normal for a few seconds ads it happen.

  What should do?

  Hey,.

  Don t get me wrong, but if you n t post more information it of almost impossible to help you

  What model of laptop you have exactly?
  What operating system is installed?
  You use the original Toshiba AC adapter?

• inactive when connecting the mouse

  AT THE START OF MY LAPTOP WITH XP I GO AS FAR AS THE MICROSOFT XP WELCOME SCREEN WITH LOG IN BOX AND USER NAME WITH THE MOUSE POINTER IN THE CENTER OF THE SCREEN AND A COMMAND CLICK ON THE USERS NAME, THE CUSTOM OF MOUSE WERK -.
  HELP WOULD BE APPRECIATED - UNFORTUNATELY I DO NOT KNOW MUCH ABOUT COMPUTERS - VERNON

  Hello
   
  1. What is the brand and model of your computer?
  2. you did it before the issue of any material changes or software?
  3. is it a USB mouse?
  4. have you tried to connect a different mouse and check if it works very well with your system?
  5. are you able to log in the system and get to the Office?
  6. are you able to use the mouse once you reach at the office?
   
  Method 1: Start your system in safe mode and check if the same problem occurs.
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222
   
  Method 2: Please run the following Troubleshooter:
  http://support.Microsoft.com/mats/hardware_device_problems/
   
  Method 3: We will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  
  Method 4: Download the latest drivers for your mouse from the manufacturer's website and install it.
   
  Method 5: If none of the above mentioned methods work, System Restore to a date when your mouse was working fine.
  Windows XP system restore:
  http://support.Microsoft.com/kb/306084

• Problem when connecting the Weblogic to MySql5 field.

  Hello
  
  I can create a field that connects to the MySql database. The server is running successfully. But when I deploy my Ear on the server the error message following project appears
  
  
  < 26 October 2009 16:24:37 IST > < error > < security > < BEA-090064 > < The DeployableAuthorizer 'myrealm_weblogic.security.providers.xacml.authorization.XACMLAuthorizationProviderImpl' returned an error: weblogic.security.spi.ResourceCreationException: Security: 090310Failed to create resource. >
  
  < 26 October 2009 16:24:39 IST > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1256554464890 'for task ' 0'. Error is: "weblogic.application.ModuleException: Exception preparation module: EJBModule (netuix.jar)"
  
  
  Is there anyone who has experienced the same problem and able to solve.
  
  Concerning

  I'm not much of a db person, so I don't know if there are differences in the file .sql for create table for MySQL db and any other db such as Oracle DB. If the sql syntax is the same for any database, then perhaps you can use one of the files already in 'C:\beawlp103\wlserver_10.3\server\lib\*.sql' may contain your mysql db as version pointbase. If it works, then you should be set because the Table exists now. But if the execution of sql fails, then try the option I mentioned above.

  I couldn't paste screenshot here, but the config wizard it comes a screen whose title is "Configure RDBMS Security Store Database". On this screen, just use the default option of the first radio button and click Next and of course later change of screens things MySQL and reboot the domain.

  Ravi Jegga

• Satellite A500-19U - black screen when connect the charger

  My PC works fine in the windows environment, application, video, mp3 palyer. In the game works well with a battery. When I plug the charger games are starting to give me a black screen or accident line and sfx in the background.

  I try to leave the PC work with the charger without a battery, the game crashes. When I press CTRL + ALT + DELETE then cancel the game recover back for everything in & do it again.

  My maps updated with the latest video driver [Nvidia G210M] and install the latest Toshiba BIOS

  Any solution guys:(heures départ à me déteste:()

  Hey Buddy,

  This occurs only on the games or the windows too?

  Are you running the factory settings or did you do your own installation of Windows?

  Maybe that's a problem with the display driver. You must reinstall the latest driver from the Toshiba page. Don t use the nVidia drivers because they are not pre-tested:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• "Error 734 PPP link control led" not able to connect the Nokia N73 to internet.

  Original title; Error 734 couldn't find a solution.

  I'm using Windows 7 Ultimate and Nokia N73 to connect to Internet. But I can not connect because the error message "Error 734 PPP link control has been terminated" is displayed. I've disabled the box negotiate Multilink for single link connections and tried again. But the error is still exist. How to solve this problem?

  Hello AhamedSajad,

  You did it changes on your computer that may have caused the connection to stop working?
  I suggest starting with a system restore to a time where the connection was working:
  http://support.Microsoft.com/kb/306084

• Impossible to reach Vlan system when connecting the Cisco VPN

  Hello

  I has several offices in my position, all my users external are connect to my website using Cisco Client VPN and access my 2 sites, all users are able to access my 2nd Desktop servers that are in the pool of 10.10.0.x, I have a vlan different in the same place with the 10.10.35.x series and users are not able to access this server pool , can someone help me on this I'm not much femilar with routing. I use ASA 5520 firewall.

  Pls help me on this.

  Hari

  I noticed that there is another road on ASA who has 10.10.1.199 nexthop. I did not notice this IP in the list of the interface on the switch. Therefore, another device between ASA and switch?

  All others inside the roads are routed through 10.10.10.36 which is the IP address of the switch, and this swit routes to correct the VLAN. But network 10.10.0.x and now 10.10.35.x are routed through 10.10.1.199.

  What is this IP address?

  Kind regards

  Jan

• Idea Pad A1 turns off when connecting to WiFi

  Ive done a complete reset, but it still occurs. Any ideas?

  I charged all night and it works fine now, I think it's a problem of battery meter but four thank you for your response