NEITHER Measurement & Automation Explorer 5.0 (superior version already installed)

Similar Questions

• How to uninstall corrupted NI Measurement & Automation Explorer?

  Hello

  I have problem to install LabView 2012 and all components, cos does not properly uninstall my version previous (2012).

  I have LabView_Fall_2012 and NI_Device_Drivers_August2012 and Win7 x 64. (try to install it on a partition not OS).

  Now when I try to install new I get "OR Measurement & Automation Explorer 5.3 (superior version already installed)" and installation stops there.

  My goal is to set everything up if possible to properly uninstall and then reinstall it. Now I have managed to remove most of the files, reg entries and stopping services, but some things are still left.

  What can I do for that Setup to deal with?

  Its possible to remove all the files/reg manually?

  There is a file that cannot be deleted ' C:\Program Files (x 86) \National Instruments\Shared\mDNS Responder\nimdnsNSP.dll ", its possible to remove it?

  Thanks a lot for your help

  IMHO, there are two options:

  1. try to reinstall 5.4 MAX, download here

  2. the STI DLL used by the LV you update tool can remove it using this tool: Unlocker

  Stefan

• LabVIEW Measurement & Automation Explorer very slow

  Hi all

  Here is my setup of the system and the version of LAbView:

  • [LabView professional Development System - Version 11.0 - 32-bit]
  • OPERATING SYSTEM - windows 7 Home Premium 64 - bit SP1 [MS]
  • CPU - [Intel Core i7-2600 processor 3.40 GHz]
  • MEMORY - [16.0 GB RAM]
  • GPU - [NVIDIA GeForce GT 530]
  • OR PXI-7951R & NOR 5761

  Everything works absolutely fine until yesterday. All of a sudden, everything about LabView is very slow. Send commands to run the stepper motor and even check on Measurement & Automation Explorer. There have been major changes in the updates or removing software from National Instruments. Everything is intact. My antivirus is AVG (which is a recent change after I removed mcaffee, but I don't think that's maybe the reason).

  any kind of advice is appreciated.

  Thank you.

  

  Add or change your antivirus/firewall can have a major effect on LabVIEW and related products, because they can potentially block your network connections. MAX scans your network for remote devices.

  I also had a problem a while back where my Firewall blocked access to shared variables. The following instructions helped me: http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/createditlogosxt/ (I don't think this affects the MAX, but I mention this in case you encounter a similar problem)

• How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  Hello

  I'm trying to follow the steps described in the following link:

  How to set the Date and time on a remote target in Measurement & Automation Explorer (MAX)?

  It is said

  The software on the target currently supports only the time zoneand deletes the old files?

  I need set the date and time

  and remove all the old unwanted files

  the calendar was gray does not allow me to change the current date.

  Anyone know how to change

  

  

  Hi all!

  According to this the below Knowledge Base article, Remote Configuration System Support must be installed on the target for time settings to change in MAX.

  http://digital.NI.com/public.nsf/allkb/FAB0EC4D6E5EE0F386257738005733A3?OpenDocument&MeTC=max_MAXDat...

  If you don't know what version of the system supported remote Configuration software that you have installed on your device target, it is likely that it is not yet installed. Add this software by clicking below your target to the MAX software option and selecting "Add/Remove Software". This is where you will install the System Configuration Remote Support software.

  Please let us know if you have any questions!

• Cannot open Control Panel Test VISA in Measurement & Automation Explorer

  With the help of Visa OR Measurement & Automation Explorer. Select the devices and Interfaces and select my device. The Test Visa Open Panel is grayed out and is not available. Some tools-> NI - VISA-> VISA Interactive Control, and the following error message appears-"unable to start the program because it lacks cvirte.dll form your computer." Try reinstalling the program to fix this problem. "I reinstalled the driver NI-VISA and the problem persists.

  Hi David,

  I'm glad that you solved. It could be that the library file has been installed, but that it was somehow lost and unable to be found by measurement and Automation Explorer. A massive compilation could have located this file and placed in the expected folder. I'm curious to know if you did a search system for the library file? I know you have talked about doing one for the file in the document I linked to you. Whatever it is, I'm glad that you were able to get this working.

  Have a great day!
  Jackie

• problem w / measure automation explore or/o Inst Asst

  Hello

  I'm new to Labview and I work my way through the tutorial. I loaded 3 disks for measurement Automation Explorer such that I can complete getting started with Labview Ch.4, using a DAQ hardware. The part where I place an e/s of Instrument on the block diagram Wizard is taking me to the top. When I double click the sub VI, it appears an error message telling me that "measurement automation explore or e/s Instrument wizard is not installed correctly. I loaded the disc twice up to now, the same questions. No one around the Office can understand it, either. I use discs of Labview dated February 2007, NOR MAX 4.2, 3.0, NI DAQmx 8.5 compliance record. Any help is greatly appreciated. Thank you.

  Hey,.

  Try the solution that is presented in this knowledge base article.

• How capture and save a sequence continues to images using NI 1422 LVDS card capture, through Measurement & Automation Explorer?

  It is possible to capture and record a sequence of images with a LVDS OR 1422 EZMaker using Measurement & Automation Explorer?  Everything is installed correctly and running and I am able to use the "Snap" command to save an image, as well as the 'Grab' command, but it seems that you must stop the dump command before you can save anything, and it only allows you to save the final image.  Is there a way to record a sequence that is being caught, or should I use LabVIEW or other additional software to do this?

  Kind regards

  James S.

  Hello James,.

  You will need to LabVIEW or another environment development in order to record a sequence of images. If you have LabVIEW and the Acquisition of Vision software, you will be able to capture and save images in an AVI file. There are examples that come with the Acquisition of Vision software that can do this.

  I hope this helps.

• Update of Adobe Reader DC - New Version already installed

  I am currently machine

  Windows 7 Enterprise x 64 with the image of the company

  G2 EliteOne 800 HP AIO

  The user has a corporate webapp that is supposed to view reports in PDF with Adobe Reader form through a HTML framework. The version of Reader included in the image is Adobe Reader X. After testing on the users computer and my own, I found that I could launch the report on my machine (with Adobe Reader DC) but not on the cost to build with Reader X.

  Of course, my first thought was to simply update X DC. I have downloaded and run the installer from the Adobe website, and received a message that says "the installation process failed. A more recent version is already installed. "

  East was quite confused as I was updating certainly from X (an older version) to DC (a newer version). What I found was that the original installation of Reader X disappeared completely and I couldn't reinstall all versions! No ads for Adobe Reader X lies in programs and features.

  The only remaining information that I could find were some reg entries and an empty folder in /Program Files called 'Adobe Reader DC", which was devoid of all files.

  It almost seems that starts the process of update installer replaces the old program, installation failure somewhere but do not make back the installation and reinstall the previous version.

  I also tried to run the cleanup tool from Adobe to remove all persistent files but that did not help at all. In case anyone asks, I have run all the tasks in a user has administrator rights account above.

  Has anyone seen this problem before? As is, the only way I know to get Reader X is to make a new picture of the machine.

  Superuser x-Post

  Windows 7 - Adobe Reader DC updated - new Version already installed - Super user

  Hi jkraniak ,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of the reader.

  Then, restart your machine and install the latest version of the player from here:

  Adobe Acrobat Reader DC install for all versions

  If you are facing the same ask you please check with the other user account with admin rights & try these steps there to reproduce the problem.

  Refer to this article:- Troubleshooting from Adobe: create an account to administrator in Windows

  Let me know how it goes.

  Kind regards

  Christian

• Newer version already installed error message when you try to install acrobat reader

  When you try to download acrobat reader 10.0 that it gives me the error "New version already installed" I'm not there that in the list of installed programs. so that I can uninstall it. JavaScript is also enabled in my browser. Please help in how to proceed.

  Hi bond_007,

  Cleaning of Acrobat Reader Download Adobe Reader and Acrobat tool - Adobe Labs tool to uninstall the application.

  Then try to download the Acrobat Reader software from here: http://get.adobe.com/reader/enterprise/

  Let me know if it solves your problem.

  Kind regards

  Meenakshi

• Measurement & Automation Explorer crashes while loading

  Hello

  I recently bought a DAQ (PCI-6239) card. I installed the NOR-DAQmx driver that came with it and follow the installation steps. When I was at the time of the opening of the Explorer Measurement & Automation to detect my Board, it crashed during the loading of the "plug-ins loading" and invites the error message "M & A E has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. »

  I tried to repair, reinstall and update all software OR related. Nothing has worked. I uninstalled LabView in case there was a mistake with it and reinstall DAQmx again. None of this has worked. I wonder whether it is a known issue or if there is some kind of problem with my system/OS. I use Win XP SP3.

  I have not tried the software to open after you have uninstalled the PCI card, but that would really help me if the software works without the card.

  Thank you

  --

  Patrick

  Adam,

  I had the operating system reinstalled with LabView 8.2 (it seems that it is the license available at the moment at our University). I downloaded the latest version of the drivers and now everything seems to work very well. From this point, our tech lab should be able to guide me on how to make the "connection" between my DAQ in MAX card and my LabView VI.

  Thanks for your help!

  --

  Patrick

• My MS Office Communicator opens when I click on 'Connect with instrument' on Measurement & Automation Explorer.

  Hello

  Recently I am having problems using the option "contact instrument" on measurement and Automation Explorer.  When I tried to click on 'communicate with instrument' button, my MS Office Communicator starts to open, then an error message appears indicating that "specified address is not recognized or does not exist. With this, I can't use MAX Explorer

  for the purpose of debugging. Apart from this problem, communication between my PC and my instruments are okay during the VI run. Hope you could help me with that. Thank you!

  I see this on two machines in my group too. Bringing this back to the top to see if we can get an answer. What do you think of gurus OR?

• Manager add-on said Java needs update, but the last Version already installed

  I have Java version SE7 U51 10.51.2.13 installed and works very well. Today, I 'upgraded' to 28.0 FF. Now Manager modules says Java is out of date, but when I go to the Java website, this is the latest version available. I downloaded the 32-bit and 64-bit versions in any case (even if I had already installed a month ago) and re-installed both. The FF Add-ons Manager always has the same caveat: "vulnerable species - Update now! Page Test in Java says I have the latest version, and it works.

  So what the devil?

  You can find the latest version of Java on Oracle's Web site.

  See the Platform Java > Java SE 8 (download the JRE 8)

  • http://www.Oracle.com/technetwork/Java/javase/downloads/index.html
  • http://www.Oracle.com/technetwork/Java/javase/downloads/jre8-downloads-2133155.html

  More quick is always download the full installer and uninstall the current version of Java before installing Java 8 version unless you need to keep the Java cache and downloaded applets.

• Tried to install Adobe Reader on the Mac, "new version already installed.

  I am trying to install Adobe Reader on my Mac. I uninstalled and reinstalled. I keep getting the message that the new version is already installed...

  Hi Sarah Simac,

  Seems that the reader is always present in your system. Its not completely uninstalled.

  Try to directly remove the application from the Applications folder, which is just trash/Applications/Adobe Reader.app.

  Also, this can cause a break in the features of Safari to read PDF files using Adobe Reader plugin. To resolve this problem, go into/Library/Internet Plug - Ins / and remove AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin

  Also try to open this link in another browser: Adobe - Adobe Acrobat Reader DC Distribution

  Let us know if it works.

  Concerning
  Sarojini

• Installation stops and "New version already installed" is displayed, even if I have NO version on my computer.

  That's all. I uninstalled a previous version because of a "Core" issue that has blocked the working version. I uninstalled this version, but whenever I try to install Adobe Acrobat now, I get the same message - a newer version is already installed. Evil. There is no such thing.

  Hi dougm44283353,

  Please try to run the cleanup tool "Download Adobe Reader and Acrobat tool - Adobe Labs" on your machine to remove all traces of Acrobat.

  Then, after removing the program, reinstall the version of the software you want to install on your system

  If a problem persists, please check with the different user account.

  Kind regards

  Christian

• Repeated version already installed installation requests

  using windows XP Pro with the version of flash player currently installed 14.0.0.145 - pop guard asking to install the latest version of Adobe - made a download and then made an installation with the error message saying error permissions - but no problem with permission and the latest version is already installed - done this for years

  I looked at one of my other computers with identical permissions and not get the same message by looking at the Setup log file - so I deduce that the xp operating system is the problem - there is internet solutions on how to fix a framework for permissions xp corrupted - I'll have to try this possibility - just to tell you thank you again once