NetBook HP 5101 and Intel 5350 or 5150 WiMax/WiFi

Will be the feature of an Intel 5350 WiMax or WiMax/WiFi 5150 mini PCIe card work in a netbook HP 5101?

Can anyone recommend a source in the United States other than ebay/unauthorized of 5350 Intel or Intel 5150?

I'm considering buying a HP 5101 using Clear WiMax service.

Here's what I've found so far.

The 5101 has two expansion slots; used for a Wifi card and one for an map WWAN broadband. Judging by the illustration in the maintenance manual, the Wifi card is installed in a mini PCIe interface with room for only one PCIe Mini Card half form factor and the map broadband is installed in an interface mini PCIe with room for a form factor PCIe Mini full-size.

Repair strives to mention that Wifi and WWAN cards are not interchangeable.  Does anyone know if the slot used for the WWAN card's owner instead of a PCIe Mini interface? Or is the warning related to antennas pre-wired? Again, judging by the repair, the HP Mini 5101 has two antennas for the WWAN card slot and two antennas for the location of WIFI card.

Intel adapters using 3 antennas.

The technical details of the Intel 5150 shows that it is made both full and half length PCIe Mini factors.

The technical specifications of the Intel 5350 shows that it is available in only the full-length form factor PCIe Mini.

HP Mini 5101 manual to repair

http://h20000.www2.HP.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSer...

Overview of the Intel 5350/5150

http://www.Intel.com/network/connectivity/products/wireless/WiMAX/WiFi/index.htm

Message edited by atlr on 03/09/2009 07:46

I'm a technician of laptop repair for a long time.

It's been my experience that when implementing (wimax/wifi intel 5150/5350/6250/6350 cards), those self (OF ALLOWS of SAY EBAY) you have the biggest obstacles single to overcome other than physical size (HEIGHT HALF/FULL / OTHER) of the embedded mini pci express card and possibly requiring a 3rd antenna during the upgrade of the wifi installed mfg in HP/Lenovo laptops It's a whitelist BIOS boot block.

What is a bios bootblock, although HP argues that, in order to prevent end users to change their card wifi (Embedded), they installed firmware in the BIOS, start, seeking the hexadecimal id for the MFG cards identification / model and especially the seller (AKA cards brand), anyway in the BIOS, there is a short list of these identifiers for maybe the cards from 2 to 8 that HP has tested and approved to be used normally pre-installed in the laptop.

Why though HP claims that the end user could if possible COULD change their wifi/wimax card to a higher version powered to another country or region and violating thus the design of the FCC approved on the laptop.

Quite frankly HP in all likelihood very insidious alterior reasons, based on my previous experience, HP is very reluctant to support new technologies.

As an example my HP DV8125NR laptop AMD X 64 processor was touted as 64 bit HP however he had a 32 bit operating system installed and no driver 64-bit available for a VERY LONG... IT OF TIME!

I was obliged to get 64-bit drivers for a laptop ACER UK with the same chipset, which did not work until I opened the Device Manager and cut and pasted hp same chipset vendor new in the drivers of acer uk id so the drivers have recognized and installed by windows, to the best of my knowledge until I did that there was zero no where who had done to overcome the HP footdragging.

WiMAX is available in 54 or more and and a constantly growing number of U.S. cities and HP is once again kicking and screaming like your child, on the way to the doctor to get an important and thereby losing millions of new mobile computer laptop/netbook/and other sales of device. Stupid as the village fool.

At the present time, there is that one exception I know Best Buy is in partnership with Clear/wimax provider and from December 2010, they have Wimax 34 on sale in their stores and online.

One and only model HP is Wimax enabled it's a DM4-1165DX, it's certainly very soft for someone who has good eyes and is just an intenet browser or grapics and/or an intensive user of processor.

It's nice because it has a robust aluminium case is less than 5 lbs very thin / light / a about 5-7 hours of autonomy and of course preconfigured internal WIMAX 4 g

HP makes me crazy it of like they don't want wimax of work related to one of their products in the home, if you look at the drivers for this laptop, they are listed as WLAN (extended lan) not Wimax bo a DRAW! HP Total Care seems to know their head from a hole in the ground when it comes to Wimax, PERIOD believe me I tried, what follows.

OK I know that you want to buy a HP dv6 or dv7 select edition, with the housing in aluminium, I7 processor, blu-ray rom / rw supermulti lightscribe DVD, only 640 GB HDD at 7200 RPM, 8 GB ram, (either pre-installed internal tv or via express card adapter) gigabit lan and last not less 1 GB dedicated graphics oh and of course free Lojack 1 year to 4 years flight tracking data / remote deletion of data services.

OK and especially not finally and especially a WIMAX/WIFI card pre-installed embedded well no matrix HP has none this option, 2 options are 1) wifi abgn nd) 2 for $25 more wifi abgn with bluetooth.

????????????????????????????????????????????????????????????????????????????????????????????

HOW STUPID IS THAT????????????????????????????????????????????????????????????????????????

OK, I will admit there is a very slight slight possibility that wimax cards intel are not compatible with the combos of moterboard intel chipset processor used in the DV6/7/8 series, however I see many laptops from Toshiba who have mothers similar I think a m55 with Wimax chipset?

I want a HP for the offered lojack, which is enhanced by the presence of a map of wimax integrated to transmit its location constantly If stolen when it is powered either, and some of the best pricing offers on laptop key from 500 to 750 GB edge i7/bluray 1 GB / 8 GB.

I made more than 50 calls to Hp and they are obviously not embrace Wimax and obstructs even its use and implementation on 99.999% of accounts, reasons might be a lack of bribes $ providers of wimax, the costs and difficulties to support technology wimax users issues, (IE traing Indian/Filipino caregivers), possibly hardware , and one that I think is high on the list is planned obsolescence where you buy your laptop and immediately know that he doesn't attack Edge internet connectivity and due to the greed of HP they will assume you will then within a year almost immediately buy another laptop because you CANNOT upgrade your wireless card which would be almost as simple as installing ram more grand/more, due to their insidious START BLOCK. I would be not so likely to choose the last if it weren't so astutely aware of House a lot of $$$ HP has spent to make their ink jet printers will be very difficult to maintain or rebuild. How is this dome of their printer plastic records would have a number of plastic hidden catches (ADULT VERIFICATION) that each must be depressed at the same time to open the case of the printer, so I don't know how Xnal retentive, they can be.

CORRECTIONS: an I thought I would just buy my laptop preconfigued less adapter integrated wimax and the period of return I would go to Best Buy and I would buy the Hp DM4 - 1165DX Wimax laptop and during the reporting period, I exchange the cards internal wireless and then install the drivers intels dm4-1165 connection manager and wimax on the DV6/7.

This COULD overcome the bootblock HP DM4 card marked may recognize as being on the whitelist of HP approvred cards.

I already tried to call 1-800-hp-invent for support for the DM4-1165DX that I could have a number of spare part

for embedded wimax/wifi card so that after I swapped the cards back I could get one directly at hp to install in my edition select DV7/DV6, for reasons I DO NOT understand they say that they have no part number of replacement listed... JESUS!

OK how not who has NOT I repeat NOT average Joe surmounted the obstacle of boot block?

Well this would have completely no warranty cancellation and just like how I built 64 drivers as mentioned previously a VERY VERY VERY VERY TECHNICALLY HABILES PERSON SMART... COULD get a bios freeware hex editor and they could open the Device Manager and get the pid / mfg/supplier codes listed in the menu dropdown descriptors device for installed HP wireless card, then you could install the card wimax of ebay than elsewhere and you could write once again down the same information again. NOW you can get the latest version of the bios of your laptop and open the file in a hex editor and you can then use the search feature to locate the id of device/vendoe/pid of the pre-installed maps hidden in the the bios code in hexadecimal code (after the course converted to hex if necessary) then you can simply replace these data with those of the map of wimax (which may have 2 sets as the map can have WiMAX via the usb port and wifi via pci-e express, although both on the same map) which requires 2 sets of inputs for replacement.

You would of course have to create a new checksum and save and BIG risk this flash as your new BIOS.

Can it be done bios bootblocks YES certainly unblock, BUT WHY WHY WHY? HP puts its faithful buyers through this RIGOUR? FOR $$$$$$$$$$$$$$$$$$$$$$$$$$$ Thats why!!!!!!!!!!!!!!!!!!!!!!!!

OH some laptops cannot and never will not support wimax even though they have a mini slot pci-e inside somewhere even if not bootblocked and or have a motherboard chipset compatibility delivers wimax/wifi card intel.

Why well when out 1 card pci - e connector minicards standard did not include either a push/pull connection usb or often a wireless switch disable hardware, some hardcore people have installed a resistance on their wireless card to pull up the signals to disable wifi wimax enable and or stuck on the contact on the wimax pci-e card.

One must understand (many WON 't) usb and pci-e express offers 2 different ways to connect devices to the laptop via an internal card in the new laptops, in the oldest of potentially no usb connector = no support for usb in subdivision wimax to the Board of Directors.

Tags: Notebooks

Similar Questions

  • Portege M400 + WiMAX Intel 5350

    Bought a card pushed!
    WiFi is accessible
    WiMAX is not even in the dispatcher of problems!

    What is a problem?

    Hello

    To be honest I m not very well what problem you have.
    I see that you have bought Intel 5350 WiMAX card and updated the Portege M400

    I found info on the page than the Intel WiMAX/WiFi Link 5350 Intel and Intel WiMAX/WiFi Link 5150 are family of network adapters wireless IEEE 802.16e and 802.11a/b/g/Draft-N1 which operates in the range of 2.5 GHz for ghosts of WiMAX and 2.4 GHz and 5.0 GHz for WiFi.

    To be honest I m uncertain quote if this card is compatible with this laptop.
    To my knowledge there is no Draft N support.

    But here is some info on this product I found on the page of Intel:
    http://support.Intel.com/support/wireless/WMAX/5350_5150/sb/CS-029556.htm

    http://www.Intel.com/network/connectivity/products/wireless/WiMAX/WiFi/index.htm

  • T400 with Intel 5350

    I just installed Intel 5350 card in my laptop. with connections of 3 antennas. I guess 2 antennas are Wifi and WiMAX. Is this good?

    For some reason, the speed of the Wifi is shown as 130Mbps. The router I use is DIR - 685 supports 300Mbps.  Speed shouldn't be around 300Mbps?

    Thank you

    I don't know exactly, but I think that the 5350 actions three antennas between Wifi (uses all three antennas) and WiMax (probably uses two).

    To achieve 300 Mbps for the WLAN (the 5350 should reach same 450 Mbps with a suitable router), we need to change the width of the channel of the card to 40 MHz instead of the default 20 MHz.

    To do this (i) Manager open the unit, (ii) to find your Intel card in the network adapters section, (iii) right-click and choose Properties, (iv) select the tab advanced, (v) for the width of the channel (band 2.4 or 5.2, whichever you use, but you can set it up safely for both) choose 'auto' instead of '20 MHz.

    You should then be able to achieve the maximum transfer of your router is capable of.

  • Display satellite C50-A546 cards how to switch between NVIDIA and INTEL?

    Hello

    How can I switch between NVIDIA and INTEL graphics cards?

    PS
    I have already installed all the drivers, but I can see that INTEL the card used chart!

    * OS: Windows 8.1 x 64
    * NVIDIA driver: 340, 52-portable
    * DirectX: 11

    Hello

    The Intel graphics chip, which is part of the central unit should be used for low performance applications, because it allows you to save energy and reduce the internal temperature.

    For best performance while game, it s advisable to use the external GPU (nVidia or AMD)
    This setting can be changed in the nVidia control panel s

    Here, you should choose manage them 3D settings (can be found on the left in the nVidia control panel)

    Now in the main window, you will find two global settings and program parameters tabs
    In the program settings tab, select the (game) program that needs to use the nVIdia GPU

    If it is not listed, click the Add button
    Then choose the graphic processor preferred for this program (generally must be nVidia processor high performance)

    Last but no less, in this program-specific settings, you can assign additional features to improve performance.

  • Using Nvidia Geforce and Intel hd graphics card both at the same time for games

    Helloo,

    I am new to the community. I bought Lenovo y50 last month. It comes with the dedicated graphics card Nvidia Geforce gtx 860M and Intel HD 4600 Graphics intigrated. Its a portable game even if I am faced with leggings in some high permorfance games.

    Can I use the graphics card Nvidia GeForce and Indigrated Intel HD graphycs... the two all in games...?

    Thank you... Help will be appreciated...

    One thing you can do to ensure the highest perfomance on games is to go to the Nvidia Control Panel programs, manage 3D settings, then find the game you want and set to use only High Performance NVIDIA graphics (or discrete).

    You can not use both cards at the same time by writing this (DirectX 11), but with the arrival of Windows 10 and DirectX 12 July 29, you will be able to use both at the same time to increase performance. So far, however, it is simply not possible to use both at the same time. The best option is to use only the GTX 860 M.

  • Upgrade of RAM and Intel graphics

    Hello
    I recently discovered that I could improve my graphics ram and intel. So I went to the performance and tools tgen relize my rankings are not the base score is 4.6 and gamming is 5.2 so you have any recommendations on new graphics for 32-bit operating system and then I put my ram from 4 GB to more than that.

    Hello

    First, your machine is running 32-bit, the RAM upgrade anything more than 4 GB is wasting money because the 32 bit OS can not access to more than 4 Gb. Second, you cannot upgrade the Intel video chip, it is soldered to the motherboard.

    Kind regards.

  • W520 and Intel SSD 520 external casing replacement?

    I decided to upgrade my W520 the Intel SSD 320 to 520 SSD Intel.  I tried the 520 in an enclosed and theW520 does not recognize the drive.  I am trying to determine if the problem is the controller in the external case Thermaltake BlacX or was it simply the problem of having the drive in an external enclosure? (In other words, it would work in a different case).  I got an OCZ Vertex 3 that would work not in external enclosures, so I'm inclined to think this is the Forum as being both the Vertex 3 and Intel 520 uses SandForce controllers.

    Suport of Lenovo, I called and they told me that the only way I can copy the disc's to buy their Ultrabay III of A 0, 65623 adapter and copy the disks inside the machine.  I use older software of Casper and I don't think he would have Renesas USB 3 drivers, if I boot from a CD and trying to copy my old hard drive backup.

    Obviously people do that.  And, if the Ultrabay III adapters are not available at this time, they must do without them.

    How can I copy my data from the old drive to the new drive?

    Thank you!


  • How to switch manually between 7690 Radeon and Intel HD3000 on Envy 15 - 3001TX?

    Someone let me know "How to switch manually between 7690 Radeon and Intel HD3000 on Envy 15 - 3001TX?" as there no viable just as switching button does VAIO...

    Thank you

    Hello

    Please check this:

    http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02731962&JumpID=reg_R1002_USEN

    Kind regards.

  • Will run CVS for these 2 family Intel(r) Xeon L5410 of CPU @ 2.33 GHZ AND Intel Xeon E5620 of CPU @ 2.33 GHZ

    HI Experts,

    Will run CVS for these 2 family Intel(r) Xeon L5410 of CPU @ 2.33 GHZ AND Intel Xeon E5620 of CPU @ 2.33 GHZ

    Not able to check the Compatibility Guide please help not able to Vmotion

    Class workstation machines are usually not certified by VMware, or the hardware vendor there.

    EVC should still work OK.  You will be limited to L1 - Intel Penryn due processor L5410.  When you create the cluster, the host to the cluster add first and then select CVS.

  • dv9550 and Intel SSD X 25 - M SATA / IDE

    Hello

    I bought my HP Pavilion in 2007 and in March 2010 I bought Windows 7 (64-bit) and Intel SSD X 25 - M 80 GB Gen2. And I noticed the wire that fell off my SSD performance.

    I discovered that my computer doesen't interface use S - ATA but IDE on the SSD drive because of the map associated to the hard drive of my computer (an adapter that are used to mount the S - ATA drives).

    And when my SSD drive use IDE interface, then Intel SSD Toolbox doesen't use TRIM function and then on my SSD performance fell.

    I read that I should change it to AHCI mode in the BIOS, but I don't find it anywhere because I don't have "' access restricted and see all the features I want to see in a normal installation of BIOS.

    Is it possible to "lock" the BIOS and put the drive in AHCI mode in order for my SSD drive work faster?

    Check the Device Manager, expand IDE ATA/ATAPI controllers and see if there is an AHCI controller installed, if there is then AHCI is enabled.

    .

  • Live migration between servers Intel Xeon E5410 and Intel Xeon E5506?

    Hello.

    Is it possible to run the dynamic migration between servers Intel Xeon E5410 and Intel Xeon E5506 processor?

    Both servers are running ESX 4.0

    Try to migrate will cause an error as UC and hostbitys do not match.

    I; m impossible and VCA (like a Core2 family and another family of Core i7).

    I don't mind to give up a part of the 'new feature' the Core i7.

    Thank you

    Zeevik.

    > I; m impossible and VCA (like a Core2 family and another family of Core i7).

    You must turn off all the virtual machines on the host with 55xx Xeons before turning on the VCA.

    ---

    MCITP: SA, MCTS Hyper-V, VMware vExpert, VCP 3/4

    http://blog.vadmin.ru

  • iPad and iPhone 6 disconnection from the Wifi after IOS 10 improvement

    A problem with maintaining connectivity to my home wifi network, I noticed on my iPad and my iPhone 6.  I'll do an alert on the iPad (which is Wifi only, not LTE) that it cannot detect the Internet. He sees my router but says 'no Internet connection '.  Same thing is happening with the iPhone 6, which translates by he's going to LTE and eat in my data plan.  In both cases, I have to re - start devices and reconnect to my wifi network.  I'm having no problems with non - IOS devices (Samsung Nook, a Roku player and a Smart TV) with my wifi network at home - two Apple devices I am owner of running IOS 10.  Is there a problem with the maintenance of wifi connections?

    Hello rm2static,

    Thank you for using communities of Apple Support. It is my understanding that your iPad and iPhone 6 have been disconnect from your home network after updating to iOS 10. I can surely see how it would be about, so much more than other devices are connect well. I'm happy to help you to get this resolved with you.

    First of all, I recommend you to reset the network settings. Tap Settings > general > reset > reset network settings. This operation brings back all the network settings to the default settings, including the Wi - Fi networks and passwords, cell settings, VPN, and APN.

    If the problem persists, try with another Wi - Fi network. Additionally, make sure that your Wi - Fi router has been updated with the latest firmware.

    See you soon!

  • I downloaded and installed it and TB preconfigured mailbox of my wife rather than create a new one for me. Whats up with that?

    I downloaded and installed it and TB preconfigured mailbox of my wife rather than create a new one for me.
    The first time I ran it, there was his box mailbox and all the msg I whatever it either has no entry for a server, the login or password. IOt just configured everything to his mailbox! He did this IP address or what?

    Network, what type of network? you have a server?

  • Is it possible to use express Airport and Time Capsule both as two Wifi-repeaters at the same time?

    Hello

    I have a time Capsule from the airport. I use it for my back ups and he repeats my wifi in the House (bottom).

    Now I need a Repeater wifi upstairs. I think to buy Airport Express. I will connect the Airport express with a Lan connection on the floor. And then I would also have wifi on the floor.

    But is it possible to use the time Capsule Airport express airport and at the same time: two repeaters-wifi?

    1. I have a Fritz! Box router / wifi (we called wifi Fritz! box)

    2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

    3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

    Is this possible?

    Before I had used TP-link (in socket), but it works for a few months.

    Thank you for your help and advice.

    2. I have a time Capsule airport / wifi Repeater (we called the turtle wifi)

    I think that your terminology wrong... the TC cannot work as a Repeater in the Frtiz.

    I think that you have done is connect via ethernet and run it as wireless... or WAP Access Point. It is perfectly great way to do it.

    3 and now I want Airport express on the floor for the wifi upstairs (another name for this wifi?)

    This is connected by ethernet, then it will work fine... you can call it Expresswifi

    You are certainly going to clutter the wireless channels, you could so be interesting rather than auto setting fastenings.

    2.4 ghz has been set to 1, TC 6 and 11 Express then Frtiz.

    5 GHz is less of a problem... auto should be fine, because the beach is mediocre.

  • Always send/receive texts even if my data is turned off (and I am not connected to wifi)?

    I'll be getting an iPhone 6 s at the end of next month. 64 GB with 3 concert data (it's cheaper for me to upgrade and stay on the plan from my parents as it is for me to make my own plan). In terms of my parents, I already have a plan of SMS and minutes for my current phone (a cursor). The 6s be my first official smartphone. There is already a plan of texting in place, and the extra thing only reason I pay is the data plan.

    But I was just wondering (and I know it's a stupid question)... can I still send/receive text messages as I would with a smartphone not (and make calls and others), even if I have my data off AND I am NOT connected to wifi?

    Yes.

    SMS text messages using your cellular operator's voice communication channels.  They do not use the data.

    However, if you use iMessage, who would use the data.  So keep that off.

Maybe you are looking for