Live migration between servers Intel Xeon E5410 and Intel Xeon E5506?

Similar Questions

• Migration of servers to new host and SAN

  Hello

  Current configuration:

  2 x ESXi servers, local storage, share nothing.  License of VMWare Essentials

  New configuration:

  3 x SAN Eqllogic, ESXi servers. Essential Plus VMWare license

  I would like to make the transition to the new configuration with minimal downtime, we have invited a few large (> 1 TB) on one of the servers and I don't want them to be disconnected for more than a few minutes, then a migration cold is out of the question.

  I had a thought that I could put the license key more on the old servers and 1 new servers, set the new SAN on the old servers, use VMWare replication to replicate virtual machines among the old servers to the new server/storage, and then perform a recovery.

  I would then remove this old Vsphere server, add a new server and transfer the license, then perform the same task on the old server to 2nd.

  Once it is finished I remove the old server 2, add the new 3rd server, and move the license.

  Can someone tell me if this is possible, or suggest alternatives?

  Thank you

  Dean.

  Hi Dean,

  Replication (replication vSphere) VMware will be requires downtime when you are recovering from the old host to new host.

  How much time can you afford for downtime?

  The recovery process will turn off the source/protected VM on the current host (VM function how long it would normally take to perform a shutdown comments) and destination/recovery VM will be powered on to a new host (again, depends on VM normally, how long it would take for the operating system and services until then a normal diet on the process).

  vSphere replication requires vSphere Web Client and other requirements, as described here: 5.5 - replication requirements vSphere vSphere Documentation Centre

  You have a vCenter Server?
  What version of ESXi (and vCenter) do you use?

  If you don't have a vCenter Server yet, I suggest you install a vCenter server and add all the current 2 ESXi hosts + 1 new ESXi host.

  From there, you'll have an ESXi 3 host, then you can migrate current ESXi host for new.

  If you are using vSphere 5.1 + you can vMotion, even if the host do not have access to the same storage see this: library of vSphere 5.5 - Migration with vMotion in environments without storage shared

  Its quite simple, if you are using vSphere 5.1 +.

  -Make sure you have vcenter Server 5.1 + with vSphere Web Client

  -Add current hosts + 1 new hosts

  -Make sure the vMotion without requirement for shared storage are filled with VSphere 5.5 Documentation Center - requirements and restrictions for vMotion without Shared Storage

  -Perform vMotion without process Shared Storage of current host to the new host + local storage to SAN EqualLogic - you can start with small VM and VM less critical first if you are not sure.

  -Once all virtual machines have been migrated to the new host + EqualLogic SAN, you can do a maintenance on the current host mode, and then delete the vCenter Server (vSphere licenses will be retrieved)

  -Add the 2 remaining new hosts.

  If you are using vSphere 5.1 prior, you must present the SAN EqualLogic again 1 new host and current 2 hosts.

  Once current hosts can see the EqualLogic SAN, make a Storage vMotion (live migration records) local storage to the EqualLogic.

  For first migration vSphere 5.1, there are 2 ways that I can think of:

  1. with vMotion - without interruption

  There are certain requirements of configuration for vMotion work: Documentation Centre of vSphere 5.5 - Migration with vMotion

  Make sure your classes and new hosts are run in the same processor / EVC mode or matrix, you can check it out here: http://www.vmware.com/resources/compatibility/search.php?deviceCategory=cpu

  If they are on different EVC Mode, you can turn on the CEV on new hosts.

  The steps are:

  S ' ensure that virtual machines are in EqualLogic (you can use Storage vMotion)

  -Perform a vMotion from the current host to new host.

  -Once all virtual machines have been migrated, you can safely do a maintenance on the current host mode and remove the vCenter Server

  -Add the remaining 2 new hosts the vCenter.

  2. without vMotion - requires the interruptions of service commissioning

  It's cold migration but without migration of storage, must be less compared to downtime directly cold immigration to localdisk of shared storage.

  The steps are:

  S ' ensure that virtual machines are in EqualLogic (you can use Storage vMotion)

  -Turn off the virtual machines in the current hosts and migrate (cold) of the host-to-host former New (you can also drag the virtual computer and drop it to the new host).

  -Once all virtual machines have been migrated, you can safely do a maintenance on the current host mode and remove the vCenter Server

  -Add the remaining 2 new hosts the vCenter.

• migration between the 32-bit versions and 64-bit Vista

  I would like to ask if it is possible to migrate from Vista 32 bit to 64 bit or later. If so, then how can we do that?

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  You will need to purchase a full version of Vista 64 bit disk/license (unless you have a retail license) and do a clean install.

  Read about the acquisition of media 64-bit if you have a license to retail at the link above.

  How to clean installation:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection between servers and opening default home

  Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?

  No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.

  But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.

• Live migration of HYPER-V Server R2 2012

  Hello

  I have a new Hyper-V 2 built node cluster. Storage is presented through SAN. Live-Migration network, network Public, private network and virtual switches-2 VMS-MGMT. These boxes are hardware identical; HP DL580 G7 with a lot of horses. I am running Windows Server 2012 R2 Datacenter Core on each node. My problem is, I validate cluster, and I get no error at all. This is a brand new clean install, but for some reason any I can only migrate from one node to another and not return without having to reboot a node after live migration. I don't know what I'm going? Has anyone already experienced this? A peer of mine installed the same scenario in a different data center and it does exactly the same thing too. Which leaves me to believe it's OS or hardware related?

  Any help will be greatly appreciated!

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• problems of migration between 4.0 and 4.1 and vpshere different server platforms

  I'm having a problem with my migration between vsphere 4.0 and 4.1.  to complicate matters, we are also migrating server chassis.   The migration of chassis is made for FT.  We discovered when planning for FT consultants, we used initially to configure the cluster FT, specified servers and chipsets that were not capable of FT.  They were Intel Xeon 53xx series.  I use the PowerEdge 2950 servers, those with the xeon 53xx was Gen2 and I am replacing them with PE 2950 Gen3 with proc Xeon 5430

  The problem, I'm running is now that I put in place a PE 2950 Gen3 in the cluster, I cannot vmotion for her.   Whenever I do, I get the following error:

  Host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register

  Bits of host: 0000:0000:0000:1000:0010:0000:0001

  required: x 000: x 0 0x0x:00: 0xx0:xx10:xx1x:xxxx:xx01

  Inconsistency detected for these features:

  * SSE4.1

  If possible, use a cluster with Enhanced Vmotion compatibility (EVC) enable: see article of the 1003212.  In the absence of EVC, see 1993.

  the thing is that I can't seem to activate CVS as options I selected do not include processors that I have in my servers.  all processor options don't list any of my processors.

  I tried seting the mask CPUID 1 VM and migration, which worked, but is completely unrealistic, because I have to stop every VM to do and some systems that need to migrate are essential.  I tried setting the mask corresponding CPUID at the host level and who does not at all.  I must have missed something simple or fell on a rather massive bug!

  help please!

  Then I suggest VCA as this will take care of him for you.

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Want to migrate the database (4node RAC) size of 4 TB of 10.2.0.5 at 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).

  Want to migrate the database (4node RAC) 4 TB size of 10.2.0.5(8 rompt = 4 prim/4 veille) to 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).  So with minimum downtime I have restore and recover again on 11.2.0.4 server must then clone that to create the day before.   Here, my question is can I take 0 backupp level before hand and restore on target (new) then primary at the time to leave the downtime take backup of level 1 of 10g and then retrieve it on 11g (new server) after successful recovery I'll perform clone to form eve of database on the new server. does this strategy work? If it works, can someone suggest me steps how can I need recover with backup after restoring the backup of level 0 on 11g. Like should I upgrade before you retrieve it with level 1 backup or I can update and then recover with the level 1 backup from the old server to the new server.

  Here is former servers of RHEL 5 version and new servers are RHEL 6 release.

  Post edited by: Umair_ali

  1 backup L0

  2 restore L0

  3. L1 and ArchiveLogs database backup

  4. copy BackupPieces L1 and ArchiveLog BackupPieces on new server

  5 CATALOGUE START WITH... to catalog the BackupPieces

  6. TOGETHER until lastavailable SNA / Archivelog + 1

  7 RECOVER DATABASE (should automatically identify the L1s and to apply ArchiveLogs)

  8 STOP

  9 START UPGRADE

  10. run catupgrd.sql

  You should also take care on the locations of the data file, dump, instance settings destinations, all link database from the database, connectivity application etc.

  Hemant K Collette

• Is it possible to do a migration of LCM between 11.1.1.2 and 11.1.1.4 to EMP?

  Hi all
  
  
  Is it possible to do a migration of LCM between 11.1.1.2 and 11.1.1.4 to EMP?
  
  Thank you.

  As I said, I didn't take (literally) the product formerly Analyzer since 2001, but what I remember was to create a connection to a database and then the construction of reports in this regard. I'm going to guess that WA has not changed that much.

  The error message that you noted:

  org.springframework.dao.DataAccessException: error creating object of essbase database.

  This error would not exist if this database connection (well, I'm probably using the wrong terminology, but you get the idea) existed on the target before the migration.

  It could also be useful to check the Support of Oracle to see if this is a known issue.

  Kind regards

  Cameron Lackpour

  Published by: CL 4 December 2012 12:00
  PS useless Info - I had the training in the WiredForOlap of 'seat', which I was sure 100% was a former dentist House converted to a software company seat. It is clear that their model worked like that had to be some time in the mid-1990s.

• ESXi 4.1 error live migration

  I have 2 servers Esxi 4.1 in a HA cluster with a dozen of VM (Windows and Linux hosts). Due to limited resources, we had to add a server more Esxi 4.1 (spec material for guests shown below). The idea was live migrate virtual machines from existing hosts to the new host. Pretty strange of the virtual machine will not migrate direct and throws the error message "host CPU is incompatible with the requirement of the virtual machine to CPUID level 0 x 800000001 register"edx"...» (screenshot attached).

  esxi1 (hosts in cluster HA)

  esxi2 (hosts in cluster HA)

  esxi3 (new host added)

  3 x DL360 g5 with Intel (r) Xeon 5130 CPU @ 2.00GHz and 4CPU X 2 GHz.

  As a work around, I can poweroff these virtual machines and migrate them to newly added host and switch on. This seems to fix the problem automatically incompatible cpu.

  Now, I'm puzzled to understand whats going on. I'm sure that someone out there had a similar experience and might have answers.

  you need to activate tehcnology Intel VT in the bios. Some manufacturers call it virtualization technology in the bios. Once you turn it back on, save it, then turn off the server and boot to the top. This gives a power cycle to cool off in ready mode of VT.

  Here's the tutorial for Dell server, but it is not far for other manufacturers. http://www.vmwareinfo.com/2009/02/enable-VT-and-EVC-in-Dell-BIOS.html

• After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

  After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

  In the future more facts and less editorial help here

  SO now, we know all about how you feel but nothing on your system or your problem

  What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

  You cannot merge libraries without third party software - Photos of power can merge pictures libraries

  You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

  When you first launched the Photos it has migrated the last used for Photos iPhoto library

  I hope this will help, but to get specific answers, you need to provide real information and not feelings

  LN

• Distributed replication of file system between servers with different performances

  If the published file system replication is set between servers with different performances. What will happen with the fastest server performance? The performance will shrink to match the performance of the server in the slower string?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Hyper-v replication between servers with different performances

  If the replication of Hyper-v is set between servers with different performances. What will happen with the performance of the fastest servers? The performance will shrink to match the performance of the server in the slower string?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Sync Windows Live Mail between two computers?

  Hi, is anyway I can synchronize Win Mail between two computers as well as anywhere I have dl my emails from the server two editions of my mail live on PC - 1 and Pc - 2 show the same message in the box of reception and items sent etc.

  I use a private email Gmail integrated, connected via pop and smtp.

  also made Live mail 2011 work also on XP, and snacks, it can be I sync between a model of Win7 and Xp comp.

  Thank you

  Sunil

  For help on Windows Live Mail, go to the Portal customer Mail to the Windows Live Solution Center .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Difference between SOA Suite 64 Bit and SOA Suite 32 Bit

  Hello

  I'm new to SOA. I want to install SOA Suite 64 Bit on my laptop with 64-bit system and a window 8 64-bit.

  I'm curious to know what what is the difference between SOA Suite 64 Bit and SOA Suite 32 Bit.

  There are various facilities available for the 64-bit and 32-bit?

  Or

  The facilities are same for 64-bit and 32-bit, but it's only depends on whether the JDK is 64-bit or 32-bit.

  Thank you

  Prashant jegou

  Hi Prashant, there.

  If you use the JDK that is bundled with WLS, I think that you have installed 32 - bit.

  The best way to check is to run java-version on the prompt of the JDK that helps run the suite servers SOA. Another approach is to examine the server log and files where the start is unloaded and you should be able to see the seller of the JVM and architecture.

  To install WLS 64-bit, you must use the generic installation program (.jar) which requires a JDK 64 - bit pre-installed. And then on top, with installation of SOA.

  I never tried to SOA on 32-bit and I think that it is not stable at all due to the limited segment size you can allocate for the JVM.

  Hope this helps,

  Anatoli

• Migration of virtual machines to vCD and again in a standard ESXi cluster itself?

  We currently have a relatively small cluster of ESXi (5.0.0 1489271) which uses a dedicated installation vCenter (5.0.0 1300600) and an instance of vCD (vCD 5.1.2.1068441).  Our goal is to move the virtual machines running in this configuration to our standard ESXi clusters (5.5.0 1892794) supported by installation of different vCenter (5.5.0 1891313).

  The instance of vCD seems to add additional parameters to the level of the virtual machine that prevents the VM of to be easily transferred out of the instance of vCD.  What we are looking for is a way to easily migrate these servers on and completely remove the vCD of the equation.  The only details around that we found cause downtime for exports out of vCD can be extended to reason the total amount of drive to the VM and VM level, which we really do not think it is an option to open a window of time to stop long enough to work through this process.

  Did someone went down this road before?  We have approximately 120 virtual machines in the cluster vCD using about 52 TB of disk.

  Maybe we're wrong understand something fundamental about the nature of migration of VMs on the vCD instance, but we have not been able to find many details on what options exist to make this move.  We have spoken several times with VMware support in this regard.  They mentioned a potential tool in the work within engineering migrate vCD to vCAC (which isn't really fall under our goal unless vCAC would then provide a clear path to return the virtual machines to a standard ESXi cluster).

  Any suggestions or ideas are appreciated.

  I am a colleague of GTC and wanted to just sent to our discussion of this topic with the help of VMware.  Basically, we should be able to Setup VMs in vCenter, outside of vCloud Director, pointing them to the same files VMDK and MAC then power off VM vCD and power on VM vCenter.

  : The NASA-EAST region

  Moment of validation: 2014-09-05 11:32 EDT

  Severity of the request for assistance: 4 - low

  Description of the request for assistance: we are looking for ways simple and less disruptive migrate VMS off vCloud Director and vCenter management.

  We have the advantage of a single principle in vCloud, managed by a vCenter and the network configuration is simple with no VXLAN.

  What are the problems with the realization of the following?

  vCD 5.1 is managed by vCenter 5.0, the final result will move VMs in vCenter even

  -Create a new virtual machine in vCenter that points to the same vmdk files as virtual machine in vCD you want to migrate, allocate same configurations of processor, memory, and network (we do not use the vCD with advanced networking)

  -Turning off the virtual computer in vCD

  -Once the vCD WHAT VM is off, power on VM in vCenter

  We must ensure that the VM vCD never gets turned on again and then when we are completely finished with all migrations of VMS in vCenter we abandon vCD.

  Of course there are details to help users migrate to how they use the vCD to vSphere vCenter client web interface or web interface.

  Entry date: 04/09/2014

  Since the opening of the case, I had interviews with several members of VMware support staff and these additional points were added.

  -Configure vCenter VM with the same vNIC driver MAC and like vCD VM vNIC

  -Rename VMDK files to make for easier management, or if not renamed then detach from the propelled out of vCD VM