Netflix and Hulu slow start

Similar Questions

• How can I get my netflix and hulu accounts to load to the appleTV

  We use netflix and hulu on our smart TV, but have some questions then got an AppleTV.  How can I get these accounts to get on screen the AppleTV.  The App store don't show them not as "in the cloud" to download?

  Hi Diane

  Once you're on the appleTV, you shouldn't be on the interface (right now all what you're used to seeing) of your smart TV.

  After you have connected your your ATV HDMI cable to your TV, your TV remote, you should be able to go to the respective HDMI (usually the key to which is called input or Source)

  Once you see the ATV interface, netflix should be there. You should perhaps update your ATV first and configure it to your wifi for the first time.

• Netflix and Hulu Black Screen

  Hi all.

  The last two days, Netflix and Hulu give me questions on my ATV 4. Applications work fine on my other TV. The menus work and I can select shows or movies to watch, but when I hit play the screen goes black and I can still hear the audio. Also, the name of the network remains visible, in the lower corner, on some TV shows.

  I have tried all the suggestions... unplugged troubleshooting, new HDMI, restarted ATV, restarted the modem & Airport Extreme. I even reset it Atv back to the factory. Still does not work right. All my applications and games works fine.

  Any ideas would be greatly appreciated. Thank you

  It really looks like a HDMI problem. You say you tried another cable, if you have reconnected both ends already. You can try an another HDMI input on the TV, to rule out the possibility of a potential problem to tne connector? Is the cable "high speed"? Must be marked on or printed directly on the cable connectors. Which indicates that it is the standard in force.

• Have not received my codes free Netflix and Hulu on my new Sony

  I bought the KDL65W850A on 06/01/2014, and I tried to complete this netflix/hulu offer but did not receive my code. Help with this would be appreciated. What is a code for the Netflix and Hulu or two separate codes?

  J. Torres

  bizznyc,

• Sony Vaio E series applications Netflix and hulu does not work

  I have download the Netflix app and hulu, because I had these accounts for nearly a year already and I tried to stream movies on these applications and it does not play. Sony technicians can not fix it either. Does anyone have the same problem with the portable touchscreen E series?

  Hi Gabo,

  Thanks for the post.

  Have you upgraded to Windows 8 or return to Windows 8 operating system?

  Try the following steps:

  1. Drag from the right edge of the screen, tap search.
  
  
  2. If you are using a mouse, point to the lower-right corner of the screen, click on search.
  
  
  3. Press or click settings, type Windows Update in the search box, and then press or click on install optional updates.
  
  
  4. Follow the prompts to install all recommended, and optional updates.
  
  
  5. Try Netflix.
  
  
  6. You may need a video driver that is compatible with Windows 8.
  
  
  7. Try to install the video driver and its update:http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER
  
  
  8. Play in desktop mode.
  
  
  9. If you have updated to the most recent Windows 8 compatible graphics driver and are always affected by the error, contact support Netflix and Hulu.

  Kind regards

  Tony.

• My netflix and Hulu services disappeared. How do I get back them?

  I see is more connections for Netflix, Amazon and Hulu premium services.

  I have the same problem on a BDP-BX59.  It happened after an update of video content.  I did not move to Asia or changed my ISP.  I followed all the steps including troubleshooting reset my router, resetting the player to factory setting and try to do an update of the firmware of a disk engraved on the Sony site.  Nothing fixes the problem.  All the video services are Asian.  Sony has sent to a bad update?

• 10.11.4 slow start and performance.

  Update caused 10.11.4 my iMac (27-inch, mid 2011) no start, after checking with an external start HD found no system errors, flawless HD, no failure of memory. Finally managed to boot into recovery and do an Internet re - install.

  Now I can't boot how whether it's very very slow, at least 10 Minutes, then well that just doesn't seem seem to work it is horribly slow. I was hoping it was indexing, but that doesn't seem to be the case.

  The question seems to be double, very slow startup and very slow performance. The external HD boot was 10.11.3 and seemed to be doing OK, so I have to assume that the question is 10.11.4 as everything else has been validated. All the usual things were made, PRAM, permissions etc.

  At this point I have nowhere to go. BTW, took me 15 minutes to get into this brief overview.

  I had problems with Bluetooth, you see only not my speaker MegaBoom and Photo Booth says "No. Camera connected... so I has the following guidelines.

  Downloaded and installed Mac OS 10.11.4 from scratch

  Then I reset the SMP:

  Reset the SMC on Mac desktops

  Follow these steps for iMac, Mac mini, Mac Pro and Xserve.

  1. Stop the Mac.
  2. Unplug the power cord.
  3. Wait 15 seconds.
  4. Reconnect the power cord.
  5. Wait 5 seconds, then press the power button to turn on the Mac.

  Reset the SMC a MacBook Air, MacBook Pro retina or the MacBook Pro with an internal non-removable battery

  This is how to reset the SMC on most modern Mac laptops, which none have a removable battery:

  1. Stop your MacBook Air / MacBook Pro
  2. Plug the power adapter to the Mac
  3. On the MacBook / Pro keyboard, hold down the command + Option + shift and the power button at the same time
  4. All the keys and the power button of output at the same time - the little light on the MagSafe adapter can change colors briefly to indicate that the MSC has reset
  5. Start your Mac as usual

  Keep in mind that by resetting the SMC you lose specific power settings, like the time he takes sleep a Mac and other customizations to the power settings. Not much, but if you have made many changes to your behavior of material you want to address things like behavior of sleep again.

  Boot time after resetting a SMC machines can be a little longer that usual, it's normal.

  Stop and start again, and this fixed everything for me...

  Robert MacAwesome88

• Satellite Pro - Slow start up and sound is messed up

  I had my * Toshiba Satellite Pro * with * Windows XP * for a good few years now. She has always worked like a gem and only gave me no problems until a few weeks ago.

  A few weeks ago I was downloading a program and with it the virus 'Antivir Solutions' very undesirable and unliked. I've done everything I can to get rid of this disaster (with the help of the support forums) and I think that I managed to get rid of it, but since my computer has not been the same.

  I had trouble downloading a PDF document, a few days ago and it froze so I tried to restart that caused the computer to have a hissing fit, remove my user account which meant I had to configure everything again from scratch. And, now, the computer takes a good 45 minutes from the moment you press the button "ON" when it is ready to start working. Not to mention, it takes a good 10 minutes every time you click on an icon for the program to start actually...

  I tried to defrag the system and you have tried to uninstall unused programs to speed up the computer, but it did not work.
  I also ran several anti-virus (e.g. Norton, AVG, Microsoft Security Essentials) to make sure that I don't have wicked not spoil me, but they come clean.

  May I also add the sound is messed up also. If I use the built-in speakers or external speakers, the sound is disjoint and broken. Like any video I have play.

  I don't know what to do.
  I can't really afford a new computer, but I need my computer to be reliable. I use my computer for 12 of the 24 hours a day...
  * What can I do? *

  Hi nicoletrist,

  I put t know what laptop you have exactly, but I think that the slow start Windows is caused due to viruses you have or had.
  A few years ago I also had a virus and it was causing a very slow start to the top, he did take up to 10 minutes until Windows has been loaded and the only solution to get rid of this used Toshiba recovery disc.

  I would like to recommend you. Use the Toshiba Recovery disk to restore to factory settings and save your data, because everything on the HARD drive will be erased.
  I'm sure after using the laptop recovery disk will work like a charm again! :)

• Close slowly in the night and slow start morning

  I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help me I appreciate it.

  Thanks to you all.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Satellite U400 - color of the shell of edges and slow start of the housing

  Hi all

  Just bought a Satellite U400-15B and am loving the laptop itself but have the following two issues.

  First of all, regarding the case I noticed that on the edge of the high gloss base (where he meets the not shiny black plastic bottom) the paint is already peeling.

  It is mainly about above the left USB port, CD drive in Rabat and at the rear above the battery (only visible when the lid is closed). It is very minor and is only visible when looked at her carefully, but obviously I paid a lot for this so do not want to look all worn in a few months. Someone at - it? I took a look at a few display models and its mixed, some are worn in areas similar some are perfect. I would like to exchange it, but I'm afraid that the replacement can be another problem like a dead pixel or may have the same problem only worse?

  Second, I noticed that my laptop takes a long time to start compared to my old Toshiba A200 which also runs Vista. I removed a lot of bloatware and the Toshiba TEMPRO, which I heard is also causing problems, but I still have this problem. It seems to start fine until the Vista logo screen then it takes awhile, while displaying "Please wait".

  Anyone has any ideas on this?

  Hello MrAK

  If the laptop is brand new and you have a few days only I recommend you contact your dealer as soon as possible and. Talk with them and explain that you don't want to have replacement with dead Pixel or something like that. I hope they will understand you and help get new but 100% good laptop.

  Slow start is discussed several times. I have Satellite A300 and commissioning was horrible, but now, after a slight modification it starts after only 1.5 minutes.
  Check my ad under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Bye and good luck

• Qosmio G20 slow start and restart

  My G20 becomes slower and slower when it starts. I still like the laptop and it s design still makes me believe s the laptop more beautiful that I've ever seen (in my opinion still improve the design then the new Qosmio s).

  So I m using 80 GB hdd2 in each total of 160 GB disk...
  I m using now 72 GB in a HARD drive and 10 GB on the other. So much free space in a single disc, but the laptop is too slow start about 3 min.

  I t n planning restore and clean the system of all the
  Any advice? Gather the HDD0 and space of two disks will be more fast laptop?

  It s 2 GHz speed and 2 GB memory.
  Thank you

  Hey Buddy

  You slow startup and startup has nothing to do with the HARD drive space.
  Your laptop could start slowly, due to a large amount of processes that run in the context of the operating system!

  What you could do, is first the msconfig and disable unnecessary applications in the Startup tab.

  Use some applications cleaning CCLeaner (tool free) i.e. to clean the operating system and the registry. Last but least could not defragment the HARD disk to improve performance.

  See you soon

• Satellite A300-1MV slow slow start-up and ongoing execution place

  I recently bought a Satellite A300-1 mV it runs vista,.
  I have the trial running Mcafee and other preinstalled software that came on the phone. My problem is that the startup of the computer seems to take a ridiculous amount of time to start, once past the ORB of vista, that it says please wait which lasts about a minute until the password request is displayed.

  I had a quick glance in the problemreports in the Panel and concluded that the program of toshiba tempro was hung up at startup so disabled but doesn't seem to have any effect, I also find that when for example you double-click a photo thumbnail to view it, it takes about 30 seconds to appear on the fullscreen allthough, the window appears on the start menu to the low allmost bar immediately.

  I defragmented the hard drive, scandisk, memory checking, virus check etc... I compared it to a friends laptop dell which has less memory, but the same processor spec and vista and that seems to work 10 times faster... any ideas?, I wonder if it is a program of toshiba at the origin of the problem.

  However, I have a problem with acrobat reader from opening on its own and telling me it can't read the file (do not know what file)

  I uninstalled it and reinstalled but still have the same question...! Help!
  See you soon

  Hello

  Very nice thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  To be honest I don't like McAfee and I installed other antivirus applications that needs far more resources. Please read this interesting thread and let me know what do you think about this.

• Very slow start and run for Dell Inspiron 6400 XP times

  "I have a problem with an Inspiron 6400 brought to ' horribly slow start and run time.  XP Pro 32 bit SP3 patched up to date.  Cleaned up a lot of "undesirable", as the partially uninstalled programs, cleaned the files temporary etc. with CCleaner, cleaned and optimized the registry afer all the cleaning has been done, defragmented, tried to start without any of the boot files, disabled all unnecessary services and uninstalled virus checking software, (but ran several anti-virus controls) etc. - no help.   Safe Start Mode is faster, but... not at all normal - 1 1/2 minutes of screen to logon instead of close to 3 minutes.  A lot of memory (2 GB), which rises to 600 to 700 MB runnng all the stuff I've tried.  Hard drive is 1/3 used out of 120 GB with a 2 GB swap file.

  One thing I'm still scratching my head over - beyond the horribly slow boot - is very slow access to files even though everything seems to work normally, but as molasses in January.  Looking at the performance of the Task Manager tab when I run a copy of a file (whether via a cmd window or with Windows Explorer), I see a near max processor would be and the other with a small business.  Even if the customer says he had been getting worse for some time, after checking and cleaning of all things 'normal', my next thought was perhaps a bad disk or disk controller driver, but chkdsk ran very well (although it took hours) even if I ' d I have already updated all drivers (and even the DVD firmware and BIOS) on the Dell web site.  Oh, and I ran Dell Diagnostics (from bootable CD) updates all with no errors found.  And access to the slow file even with symptoms had max-processor occur with a copy of the file on a USB key that seems to eliminiate the hard disk, the disk controller and the pilot.

  The other interesting part of the display for a file copy task manager is that the processes tab simply shows System Idle 97 to 99%, with a percentage of casual for other processes as Explorer while I see 1 max out procesor on the performance tab.  That the same copy on your desktop shows 3-4% of the CPU usage and who is with active antivirus software.  I'm almost ready to fall toward a Windows reinstall, but would like to find the real reason behind this problem of puzzle...

  It of almost as if he's using PIO instead of DMA disk access, but... don't know how/where to test this.

  Look at:

  http://Windows-XP-tricks.com/direct-memory-access-DMA-on-IDE-hard-drive.php

  and

  http://winhlp.com/node/10

  Solved!   Thanks for the links, especially to each other.  An old but still a goodie!

  For those who have enquring spirits (and anyone else who stumbles across this thread), the primary IDE controller has been set to PIO and locked it.  Who would have thought that Windows slowly reduced the transfer speed, whenever he saw 6 errors on an IDE device until it has been reduced to PIO and then he locked it?  But the procedures described in the link of winhlp.com showed how to solve the problem.

  There are actually several problems that led to the final symptoms.  According to KB817472, the Atapi.sys has been improved in XP SP2 only degrade the speed of transfer on 6 consecutive errors instead of 6 cumulative errors.  And even though everything I have (Microsoft update) was seen and showed that this area was to SP3, I found that the driver for the controller layer IDE was the SP2 version.  Someone ran sfc previously perhaps?

  Oh, and I know now that the Task Manager process tab does not time processor kernal, but the performance tab.  Good to know...

  Thanks again to all who have responded.  Starting at the time of connection-question now is 40 seconds.   You'll love Untra DMA mode 5.   There is still a lingering question in my mind, since I've had the same symptoms of slow copy of a file on a flash drive.  Perhaps a link in some way to the way that Windows treats a flashdrive as a "drive"...

• XP system is extremely slow start and open programs are more inadmissible

  Is anyone know the problem / answer?
  My XP Sp3 has EXTREMELY slow start and programs are mostly non_responsive. When I close the programs they Peel the top of the screen down. Can you help me?

  * original title - screens XP Sp3 frozen, non-resonsive programs, peeling *.

  Hi dmahu,

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What happens when you try to open the programs?

  ·         You receive an error message/code?

  ·         What security software you are using on the computer?

  ·         Do you have too many applications on the computer installed?

  I suggest you try the steps mentioned below and check if it helps.

  Step 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, restore your computer to a Normal startupmode.

• slow start up and slow down the stop

  Hello

  I'm having a problem with my brother's computer. It's very slow when starting and very slow when it stops, also for when the computer is in use it is slow.

  I defragment the hard disk, use disk cleanup and search for any virus.

  I also looked in the advanced tools and performance tools, he gave me information indicating that the wmi provider host and the vaio entertainment database service caused the computer to the slow start.
   
  IM afraid if I remove these automatically start something worse would go wrong.

  Thank you for your time.

  Hi rookcpu,

  Before you attempt any other measure, I suggest you try the following basic steps, these steps are worth a try:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.