NETGEAR ReadyNAS Pro 2 - shares via Windows - YES - administration via browser Page - NO

Similar Questions

• Amount of data lost after replacement of disc on Readynas Pro 6

  Hi, I just came across a serious problem, and I hope someone can help me.

  Currently my Readynas Pro 6 does not see no matter what volume the 6 X-Raid Array disk more.

  I walked past my NAS one a few hours ago and saw the display flashing with the message that the volume has been degraded. A little strange as I had not had any warning about the deterioration of the disc before. I have identified the disc (#2) and replaced by a spare part that I had prepared for such occasions. After the reconstruction has been completed the readynas showed the message that the volume was still degraded: about 5 to 10 minutes later the identified readynas drive 5 must be replaced. Two drives at the same time? I don't have another spare drive, so I thought of making a scrub to see if that would make a difference. The scrub my NAS on the timer go out. When I restarted it, it had lost its range X-Raid.

  Anyone have any idea if I can solve this? The pro6 nas Works 6.2.4, the admin interface works fine, I have access to log files.

  Erik

  Yes, required that windows file systems.

  Obviously much cheaper than any professional collection service.

• The Windows Firewall blocks network share on Windows 7

  I'm currently on Windows 7 Pro x 64.  I use the firewall of Windows of Microsoft Security Essentials and Microsoft.  No firewall AV or additional software is currently installed.  I regularly use the many Xbox 360 to stream media content of this machine on the home network.  In addition, I set up a homegroup to share resources such as printer and fileshares with other machines in the House.  It's all working perfectly until a few weeks ago.  No direct changes to installation other than updates of Microsoft, Adobe (Flash) and Oracle (Java).  Now, unless I turn off the Windows Firewall, my xboxs can not see the sharing machine, and no other network computers can print/share via homegroup.

  Currently, discovery network, file sharing of printers and streaming media are disabled and cannot be reactivated.  Check the radio buttons on the first two, then clicking to save does nothing.  I get sent to the network and sharing Center screen, but when I check again options for change advanced sharing settings, the options are returned to the people with reduced mobility.  Media streaming from this screen says it is on (even if this is not the case), but when I select the option to change this, it says it is disabled (which is correct).  By selecting the option to turn on media streaming continuously, does nothing.  I can click constantly with no change.

  I ran the Virus Scan free from Symantec online as long as complete system scan MSSE where each is an element, and in each case, the two elements have been removed (for the threat found by Symantec) NPE and (for the number found by MSSE) the MSSE tool.  I also run SFC/scannow and repaired the problem identified.  With two comprehensive analyses of each tool, I am sure that my machine is the threat and corruption free.

  In addition, I went through the list of services recommended to 'start' and 'automatic' which was published MANY times by MANY people.  For clarity, I have all these started and set to automatic:

  o computer browser
  o Client DHCP
  o customer DNS
  o network connections
  o knowledge of network locations
  o remote procedure call (RPC)
  o server
  o support TCP/IP Netbios
  o workstation

  With all these started, I can not follow the discovery of the network, the file and printer sharing, and streaming media options running.  I also made sure upnp started as well.

  I noticed, however, when I disabled the Windows Firewall, all options could be changed and stayed changed.  I added WMP to the firewall allow list and activated the firewall.  All options have yet.  In the firwall outgoing options are all set to allow, if incoming is currently refused saying "block all connections to programs that are not on the list of allowed programs."  It is the default state of Windows Firewall.

  Run without AV and a FW is NOT an option.  Specifically, these are tools MS and should not conflict with these simple network features.

  Help

  I was able to solve the problem after a kick in the right direction of another user of the forum.  The 'general' advice give cannot solve the problem, but they are a good starting point if nothing else.  Please see this thread for the difficulty that I used:

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/2edd56f0-c00b-48f8-8812-6bd5b8ed33fa

• ESXi 4.1 cannot add NFS data store on a Netgear READYnas 1100 (please help)

  I have a Netgear ReadyNAS 1100 NAS

  When I put an NFS share, so I can add a store of data on my ESXi 4.1, I

  use the following instructions in their site: http://www.readynas.com/?p=3030

  Each

  time I try to join the NFS share via the GUI, I get the following

  message: "operation failed, diagnostics report: unable to complete.

  Operation of sysinfo.  Please see the log file VMkernel for more details. »

  I have

  have also tried the SSH console using the command: esxcfg-nas

  -a/share/mynfs s o 10.0.0.10 mynfs and I get the error:

  "Connection to the NAS volume: mynfs.

  Unable to connect to the NAS volume mynfs: unable to complete the operation of Sysinfo. Please see the log file VMkernel for more details. »

  details of the journal of the kernel are:

  August 19-14:37:36 pass: cannot read the header on stream TCP (local = 127.0.0.1:60962, even = 127.0.0.1:0): N7Vmacore15S ystemExceptionE (connection reset by peer)

  August 19 at 14:37:47 pass: PersistAllDvsInfo called

  August 19-14:37:51 pass: airfare to CIMOM version 1.0, root user

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.311 2AAA3B90 info "TaskManager"

  opID = 993 D 2353-0000037 C] task created: haTask-ha-host - vim.host.DatastoreSystem.creat eNasDatastore-1124

  August 19 at 14:37:59 pass: 2010-08-19 14:37:59.312 FFFB0B90 info opID = 993 D 2353-0000037 C ' Hostsvc::DatastoreSystem' creating test data store

  August 19 at 14:37:59 pass: AddNasVolume called

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupVmfs: could not find VMFS

  volume id & lt; unset & gt; path, & lt; unset & gt; or name test

  August 19

  14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupNasByName: could not find

  NasVolume volume test n soul

  August 19 at 14:37:59

  VMkernel: 0:23:10:59.338 cpu0:5299) NFS: 149: command: (Mont) server:

  (10.250.50.93) IP: (10.250.50.93) path: (/ esx) Label: (test) Options:

  (Non                   e)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669

  CPU2:5299) WARNING: NFS: 946: MOUNT RPCfailed with State CPP 13 (CPP has been

  interrupted due to timeout) try to serve mount r

  (10.250.50.93) path (/ esx)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669 cpu2:5299) NFS: 160: mounting NFS 10.250.50.93:/esx failed: unable to connect to the NFS server

  August 19 at 14:38:29 vobd: 19 August 14:38:29.727: 83489529043us: http://esx.problem.vmfs.nfs.mount.connect.failed failed to get to the 10.250.50.93 Server mount point /esx. E rror: unable to connect to the NFS server.

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.727 FFFB0B90 error

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] mount VmkCtl or ProcessNas

  has failed: operation completeSysinfo impossible.  Please see the VMkernel

  log file for more details.

  August 19 at 14:38:29 pass: [2010-08-19

  14:38:29.727 2AA15B90 'ha-eventmgr' info] event 79: impossible to climb to

  the 10.250.50.93 Server mount point /esx. C cannot

  me onnecter to the NFS server

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "App" opID = 993 D 2353-0000037 C] AdapterServer caught

  exception: 2a6fb460

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "TaskManager" opID = 993 D 2353-0000037 C] task completed:

  haTask-ha-host - vim.host.DatastoreSystem.cre ateNasDatastore-1124 Status error

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.740 info FFFB0B90 "Vmomi"

  opID = 993 D 2353-0000037 C] Activation N5Vmomi10ActivationE:0x2a761010 : invoke made on vim.host.DatastoreSystem:ha - datastoresystem

  August 19 at 14:38:29 pass: Arg spec:

  August 19 at 14:38:29 pass: {(vim.host.NasVolume.Specification)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: remoteHost = "10.250.50.93."

  August 19 at 14:38:29 pass: remotePath = "/ esx"

  August 19 at 14:38:29 pass: localPath = "test."

  August 19 at 14:38:29 pass: mode = "readWrite"

  August 19 at 14:38:29 pass: type = "nfs."

  August 19 at 14:38:29 pass: userName = & lt; unset & gt;

  August 19 at 14:38:29 pass: password = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  August 19 at 14:38:29 pass: throw vim.fault.PlatformConfigFault

  August 19 at 14:38:29 pass: result:

  August 19 at 14:38:29 pass: {(vim.fault.PlatformConfigFault)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: faultCause = (vmodl. NULL in MethodFault),

  August 19 at 14:38:29 pass: faultMessage = (vmodl. [LocalizableMessage)

  August 19 at 14:38:29 pass: (vmodl. LocalizableMessage) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "com.vmware.esx.hostctl.default"

  August 19 at 14:38:29 pass: arg = (vmodl. [KeyAnyValue)

  August 19 at 14:38:29 pass: (vmodl. KeyAnyValue) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "reason."

  Aug

  19 14:38:29 pass: value = "could not complete the Sysinfo".

  operation.  Please see the log file VMkernel for more details. «,

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: message = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: text = ","

  August 19 at 14:38:29 pass: msg = «»

  August 19 at 14:38:29 spend :}

  Check your DNS on the NFS Datastore server settings.  I had a timeout problem bad w / my NFS server.  We define for OPENDNS temporarily and NFS store popped up immediately.

  Joe

• Management Services is offline readynas pro 6

  I rebooted my NAS this morning and it does not load the admin page, I can access some applications via the ports, but not the admin page.

  Any help would be greatly appreciated, I have no idea how to solve. Well above my pay grade.

  Its a readynas pro 6 OS6, I officially running has no support. I really want to avoid a reset nothing can save. SSH logins fair we currently I enter a user name.

  See you soon.

  I sent you a PM.

  Really, you should backup your data.

  Any important data should be stored on just one device.

• ReadyNAS Pro 6 - Pro Support

  Hi all, I'm looking for more details on the pro for my Readynas Pro 6 support. However, when I called support they advised only per-incident support is available. The reason why I ask that it is the customer that I support has no real technical knowledge and it's always a matter of concern for me when I am not available. It would be good if there was a service I could buy so they could call an experienced support engineer who could go to distance effectively and help them if I wasn't able to. Thank you...

  It is what it is.

  The 314 is a suitable replacement for the Pro 4. It has a faster than the Pro 4 processor and double the RAM. However, it is not as powerful as the Pro 6. It depends on the use case whether it is appropriate.

  The 516 has a better processor than the Pro 6 and 4 x the RAM.

  Yes, you can run double redundancy on the 314. A system of 4-Bay double redundancy would be the capacity of the smallest disk.

  Rackmount the 3130 or for a 12 - bay 3220/4220 according to budget would be the way to go.

• Impossible to share via the messages button - does not

  When you use safari and tempting to share via the messages button nothing happens...

  

  He used to work and nothing now... anyone know what could cause that?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Windows 7 Pro usually access my Windows XP PC at home

  I'm trying to send files from my windows 7 pro pc to my windows xp pc I had my pc windows 7 to show my pc under windows xp in the list of network pc but when I click on it, my pc windows 7 ask you a user name and password that I don't know and never set up on my xp pc how to find set upward or change this to share my fi.les on the pc windows 7 on xp pc?

  My assumptions

  I guess you tried just using them together for your question relates to a matter of setting and not a flaw that appeared after a certain period when the network to have behaved correctly.

  I also assume you are using a router rather than a simple connection by Ethernet cable between their LAN connectors.  There is no implementation of controls for a direct connection.  I have a direct connection between my Win7 & WinXP Pro but there are differences between XP Home & XP Pro, so some of my terminology would be incorrect - if I understand correctly the only notable difference is that XP Home has the safety of the less robust.  See a procedure step by step for the creation of a network of Ethernet cable of two computers between Windows 7 and Windows XP Pro with ICS.  You might find useful additional comments on XP Home in your Windows 7 helps the Networking computers running different Windows versions , but I don't think that there is nothing of major importance in this article.

  My advice

  Both computers must have a common Admin account on them.  So just create an Admin account on your Windows XP with the same name & password as an Admin on your Windows 7 account.  Use this account to authorize the initial operation [you see the dialog box allows you to change the name of the account you want to use for authorization].  You should be the inverse as well [WinXP to Win7] and you can allow using the Admin account.

  Once this is done, the network should function normally.  The Admin account, you choose the initial approval is not constrained your subsequent use of the network - other users will also be able to use the network without additional authorization is necessary.

• Can be upgraded to Windows 8 Pro custom built-in Windows 7 Home Premium?

  My question is I am running Windows 7 Home premium 64-bit upgrade on my custom computer. It is not oem. Buy Windows 8 pro upgrade and it will work because the entire site to pre order enough to pre-order pro versions. Does in 32 and 64 bit. It's going to be a Windows 8 for individuals. Thank you.

  Yes, you can upgrade from Windows 7 Home Premium 64-bit Windows 8 Pro 64-bit. Upgrade details for 39.99 allows the installation of 32 or 64 bits. Of course, if you want to preserve your personal files, settings and installed applications, you install the 64-bit version.

  The upgrade from Windows 7 to Windows 8

  See also:

  http://windowsteamblog.com/Windows/b/bloggingwindows/archive/2012/10/12/reserve-your-copy-of-Windows-8-Pro-and-pre-order-Windows-8-PCs-today.aspx

• Windows 8 Pro X 64 for Windows x 64 pro 8.1 update

  I'm a little confused, but I think that the answer that was given to me by an MS Technician.

  I have improved my parts of it to install windows 8 pro from scratch.

  In a bulk of 4 days, I had to call to activate windows about 5 times.

  I would like to activate, and then next day window will say windows must be enabled.

  Had to reinstall windows 8 pro several times.

  Here's the problem, I understand that I can not update my copy of windows 8.0 pro for windows 8.1 pro free.

  The free update to windows pro 8.1 was a special promotion offered during a short period of the last year?

  Just like the Windows Media center free offer?

  If this is true (which I think it is) then why when I started my computer this morning was there a message that says I have a free windows 8.1 in the MS store in waiting for download?   He said windows 8.1 not windows pro 8.1 to be precise.

  And, Yes, when I checked the MS store there was windows 8.1 day about 3.64 GB in size.

  So what is the answer to this problem.  Should I update to windows 8.1 and facing problems of activation or not?

  All users of Windows 8 have right to 8.1 Windows Update. There are different editions of Windows 8:

  Windows RT - right of Windows RT 8.1

  Windows kernel Windows 8.1 - 8 right

  Windows 8 Pro - right of Windows Pro 8.1

  Windows Enterprise 8 - the right of the company of Windows 8.1 (cannot be downloaded to Volume License Service center.

  As long as your current Windows 8 Pro is activated, you are entitled to the free Windows 8.1 Pro update through the store. There is no need to worry other activations.

  See:

  http://techingiteasy.WordPress.com/2013/10/17/how-to-upgrade-from-Windows-8-to-Windows-8-1/

  also:

  Upgrade to 8.1 Windows: FAQ

  : http://windows.microsoft.com/en-us/windows-8/upgrade-to-windows-8

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial

• What "unmapped user access" for NFS share in Windows Server 2008 R2?

  In the beginning, I followed this Youtube video to set up an NFS share in Windows Server 2008 R2:

  https://www.YouTube.com/watch?v=BQ8Q_vsiksg

  Please note that the default option to allow to access Unix unmapped user is not changed (to about 1 min 57 sec).

  Then I found another article at http://www.vmwarearena.com/2012/07/create-nfs-datastore-for-esx-in-windows.html

  But in this article, I like to select allow anonymous access (instead of allow access Unix unmapped user).

  So who is correct?  Or both are correct (which means that this 'unmapped user access' is not serious)?

  And why should we have to allow root access (in the NFS share permissions dialog box)?  What a security risk?

  Thanks in advance.

  Have you tried to run through the steps taken from the blog of VMware?

  How to enable NFS on Windows 2008 and currently at ESX | Insider - Articles from VMware VMware support

  Also, there are 3 KB articles to know in case of potential problems

  1. http://kb.vmware.com/kb/1004490

  2. http://kb.vmware.com/kb/1003967

  3. http://technet.microsoft.com/en-us/library/cc753302 (WS.10) .aspx

  Noting in particular this section

  Share the folder of Windows for NFS

  To share the folder of Windows for NFS:

  1. Right click on the local folder you want to share via NFS.
  2. Click NFS share.
  3. Type the name for the share. For example, NFS-VMFS01.
  4. Delete to allow anonymous access.
  5. Click on permissions.
  6. Change the type of access in reading + writing and select allow root Access.

• Acrobat pro 6 works on Windows 8?

  Acrobat pro 6 works on Windows 8?

  Hi Al52288225

  Acrobat Pro 6 has not been tested with windows 8 windows because 8 did not exist when we started Acrobat 6... But yes you can give it a try, but its not recommended

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• ReadyNAS Pro 6 is stuck at the start...

  The ReadyNAS Pro 6 is running OS 6.4.1. It has 6 x 4TB Seagate disks and runs since sept 2013 OS6.

  1.5 weeks ago about the NAS got does not. The screen was black and did not respond to the power button. Also, there not respod on SMB, HTTPS or SSH application.

  I held the power button for a hard reset, the system was running from 21 to 24, then it's the same thing. I did a hard reset with the power button, but the system got stuck on Booting... I have powered the 25 and the start menu. I tried to run a test drive, he counted records (indicating the disk numbers) and has begun to rise 1%. The next morning the system still worked Testing (remember exact) just read on the screen.

  Now I tried to reinstall OS, but the system has been slain at the start... FW update (no figures for disks are displayed on the screen). I guess the next thing to try is the recovery from USB?

  Replied to your MP that you sent earlier this morning.