Management Services is offline readynas pro 6

Similar Questions

• 6 pro: Managment Services is offline (RNOS 6.4.2)

  All,

  I've seen this problem on other posts, but not of direct response. My NAS has stopped responding, both WebGUI and SSH work more. It could have happened after that she filled.

  Unfortunately no guarantee but any help is welcome.

  Dave

  There was a problem with the file system on the volume of the root, so I copied the content off, formatted the volume root, copied data retrospectives and fixed a number of things with the volume of the root and then he started back to the normal mode.

• The RN102 management service is offline (6.5.1)

  Hello

  I work in a nonprofit who is having the same problem as the others 'offline' status of the server, problems are also encountered with respect being able identify you via Readycloud. Do you think we could have similar problems and if so how do we fix?

  After a few config was fixed and a re - install OS was done ReadyCLOUD now works very well for the HUTS.

• RN516 - management service offline after updating 6.4.0

  Hi all

  Since 6.4.0 to day I have the problem now:

  Management service is offline now

  

  Can someone help me because can't reset factory because of the backup is not uptodate.

  Thank you.

  Hello

  I contacted the Netgear Support: they solved my problems on RN516 since 6.4.0 update.

  Then the same contact

• Management services ReadyNAS offline after 6.5.2 updated

  I used my RN104 successfully since her installation.

  Discs 4 x 3 TB approved without incident running.

  Installation of firmware updates when you are prompted.

  But with the upgrade to 6.5.1 6.5.2, I cannot now access services of management by Netgear RAIDar.

  If I still have access to the data on the network.

  I did an OS reinstall but ends with the same result.

  Factory reset is not an option preferred at this stage.

  Curiously, radar, it shows that 3 active disk on the unit all 4 lights are active.

  How can I try to fix this problem?

  It seems that the problem is now solved. The system has started and the service is offline.

  It is always good to have a backup.

• ReadyNAS Pro 6 - Pro Support

  Hi all, I'm looking for more details on the pro for my Readynas Pro 6 support. However, when I called support they advised only per-incident support is available. The reason why I ask that it is the customer that I support has no real technical knowledge and it's always a matter of concern for me when I am not available. It would be good if there was a service I could buy so they could call an experienced support engineer who could go to distance effectively and help them if I wasn't able to. Thank you...

  It is what it is.

  The 314 is a suitable replacement for the Pro 4. It has a faster than the Pro 4 processor and double the RAM. However, it is not as powerful as the Pro 6. It depends on the use case whether it is appropriate.

  The 516 has a better processor than the Pro 6 and 4 x the RAM.

  Yes, you can run double redundancy on the 314. A system of 4-Bay double redundancy would be the capacity of the smallest disk.

  Rackmount the 3130 or for a 12 - bay 3220/4220 according to budget would be the way to go.

• Amount of data lost after replacement of disc on Readynas Pro 6

  Hi, I just came across a serious problem, and I hope someone can help me.

  Currently my Readynas Pro 6 does not see no matter what volume the 6 X-Raid Array disk more.

  I walked past my NAS one a few hours ago and saw the display flashing with the message that the volume has been degraded. A little strange as I had not had any warning about the deterioration of the disc before. I have identified the disc (#2) and replaced by a spare part that I had prepared for such occasions. After the reconstruction has been completed the readynas showed the message that the volume was still degraded: about 5 to 10 minutes later the identified readynas drive 5 must be replaced. Two drives at the same time? I don't have another spare drive, so I thought of making a scrub to see if that would make a difference. The scrub my NAS on the timer go out. When I restarted it, it had lost its range X-Raid.

  Anyone have any idea if I can solve this? The pro6 nas Works 6.2.4, the admin interface works fine, I have access to log files.

  Erik

  Yes, required that windows file systems.

  Obviously much cheaper than any professional collection service.

• Active Directory Rights Management Services has locked up my task schedular

  my task scheduler is locked the top of model ADRMS fixing State Server clear I have no server of this a refurbished however task schedular is locked a States corrupt, any corrupted task controlled by Active Directory Rights Management Services, it also controls the recovery

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• ReadyNAS Pro 6 is stuck at the start...

  The ReadyNAS Pro 6 is running OS 6.4.1. It has 6 x 4TB Seagate disks and runs since sept 2013 OS6.

  1.5 weeks ago about the NAS got does not. The screen was black and did not respond to the power button. Also, there not respod on SMB, HTTPS or SSH application.

  I held the power button for a hard reset, the system was running from 21 to 24, then it's the same thing. I did a hard reset with the power button, but the system got stuck on Booting... I have powered the 25 and the start menu. I tried to run a test drive, he counted records (indicating the disk numbers) and has begun to rise 1%. The next morning the system still worked Testing (remember exact) just read on the screen.

  Now I tried to reinstall OS, but the system has been slain at the start... FW update (no figures for disks are displayed on the screen). I guess the next thing to try is the recovery from USB?

  Replied to your MP that you sent earlier this morning.

• HP connection manager: Fatal Error, HP Connection Manager Service has stopped responding.

  Hey there,

  I have a very big problem with HP Connection Manager 4 on several Windows 7 laptops. The program is installed on about 250 laptop computers and some of them drive me crazy. Everything was fine until some point (I'm not quite sure, that could be after the installation of SP1, Win7), the connection manager has decided to stop working on some machines. Whenever I try to start it, it takes a long time to load until the following message is displayed:

  "HPConnectionManager.exe - fatal error '.

  HP Connection Manager service has stopped responding. Quit and restart the application.

  A fatal error occurred, check the HP connection manager in the event viewer for more details.

  Recovery of the factor of COM class for the component with CLSID {24DB46C8-C842-4E91-9AC4-8A9525A5551D} failed due to the following error 80080005. »

  I tried the following on one of these books:

  -Start the service manually: "Error 1067: the process terminated unexpectedly."

  -Msconfig: Removed any connection associated with Autostart Manager

  -Reinstall the HP connection manager

  -Repair HP Connection Manager

  -Reinstall .NET 3.5

  -Changed some regkeys

  -Install Microsoft Hotfix KB2519740 which is part of the system essential updates for Microsoft Windows 7 (that I can't download because there is a server error)

  More information:

  -(pour la plupart) HP Probook 6550 b

  -Windows 7 Enterprise 64-bit, SP1 (English and German MUI)

  -HP 4.1.22.1 Connection Manager

  The only thing that really works is to reinstall the laptop with the image with which we install all of them. HP connection manager is installed as a software later so I don't understand why a reinstall is successful.

  I'm really tired of this problem, and I have a few unhappy customers on my back, so if you have any suggestions for me, please help.

  Thanks in advance!

  You could try this on one machine that shows the issue and see if it helps:

  Relevant information:

  V4.4.10.1 Connection Manager

  Corrections in sp58930:
  -Fixes an issue where the setting of HP Connection Manager protocol PAP (Password Authentication) in the connection profile for Verizon LTE systems causes an authentication failure of network systems in some markets.
  -Fixes an issue where HP Connection Manager is not displayed in the configuration of the HP software.
  -Fixes an issue where event viewer displays an error in the HP Connection Manager once the system is restarted.
  -Fixes an issue where the HP Connection Manager displays the error message "SIM card is locked" when a PIN has been used successfully to unlock the SIM card.
  -Fixes an issue where the "Enter PUK" (Personal Unblocking Code) button does not appear in the HP connection manager when a SIM has been locked after the PIN code has been entered incorrectly.
  -Fixes an issue where the statutes of the wireless LAN and Bluetooth device not display correctly on the HP connection manager when Connection Manager is started while the wireless LAN and Bluetooth are turned on and connected.
  -Fixes an intermittent issue where network technology is incorrectly identified.
  -Fixes a problem that causes a HP connection manager to stop working and an error message is displayed.
  -Fixes an issue with the Spanish version.

  Prerequisites:
  • HP or Compaq machines only brand
  • Operating system is Windows XP or later
  • If the operating system is Windows XP, it must have installed SP3
  • Version of the .net framework 3.5 SP1 must be installed

  Improvements:
  -Supervises HP Support version 4.6.8.1

  Installation package:

  sp58930 Connection Manager V4.4.10.1

  =====================================================================================

  Hope that helps...

• Receive an error message that the HP Connection Manager service not installed

  Original title: Application of program compatibility... I get a box that says. Service not installed HP connection manager... so it says incompatible... How can I fix it?

  This box appears whenever I start my computer...

  Hello

  1. what version of Windows you are using (Windows XP, Vista, 7)?

  2 did you change on your computer before the show?

  Follow the steps mentioned below:

  Method 1:

  Step 1: Run in SafeMode networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  If the problem persists, follow the next method

  Method 2:

  Let us try to reinstall the HP connection manager and check with the question.

  HP Connection Manager service

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-Connection-Manager-service/TD-p/891309

  It could be useful!

• at the start of geta pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  starting to get a pop up = document Manager service could not be started, check the filter of the vault is loaded and run

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Method 1:

  I suggest you uninstall and reinstall download System Manager and check if the problem is resolved. See the article mentioned below.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Desktop window manager service is missing

  Reference Dell 1520
  Intel gm965 chipset
  Windows 7 Ultimate RC

  A few weeks ago, the Aero feature has stopped working on my Dell 1520 with Windows 7 RC.  I downloaded the latest driver for Win 7 for Intel, but that does not solve the problem.  When I went to restart the desktop window manager service, I found it lacking altogether.  Y at - it somewhere that I can download it again?

  Bring up the Run dialog box (using the Windows key + R), and then type the following command and press ENTER:

  CMD /K SC QC UxSms

  Copy the output and include it with your answer. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work

  I get the following error message when you run windows network diagnostics. I ran the diagnosis because I have a network with Win 7 Ultimate 64 bit on a computer and WinXP 32 bit on the other.  Curiously, I can easily see and manipulate all files through the firewall of Windows XP. Either way, Windows XP can not see files on Win7. I can drag files to the shared folder, XP can see them, but can not open the same when I enable the share using Win7.  I can see the Win7 computer name and I have a home network without password. When I click on the folder with XP, the error popup grey box says that I might not have permissions to access these files. Contact the administrator of systems etc. My network has the same name on both computers, so I feel totally betrayed by what is happening here. There should be no problem but there is a.

   

  I get this error message when you run windows network diagnostics:

   

  The Peer Name Resolution Protocol service (PNRPsvc) or peer network (p2pimsvc) Identity Manager service does not work, The Peer Networking Grouping (p2psvc) service depends on these two services to work correctly

   

  I've followed these tips nothing does not:

   

  ·                                                                                                                                                                                                                                                     To see which services are/are not running click on the ORB start and type Services in the search box at the bottom of

  the menu. Select Services results.

  Check the columns of type status and commissioning for "Start" and "Manual".

  Those who are not running, then select properties in the right click menu.
  Click the startup type box and select manual in the menu, then click on apply, then OK at the bottom of the window.
  Now try to Start the service for the option in the main window.
  Try the homegroup connection, if the service starts

  Try a reboot if all goes well. The settings may or may not stick!

  Scroll down the page until you see the following...
  Select Services results.

  Hi MarkWebber,

  Method 1: I suggest you to follow the link provided below to start your computer in safe mode with network.

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If it works fine in safe mode with network, try to put your system at startup mode minimum state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Studied the problem and found the solution. A file has been corrupted and remove he got running PNRP service. The file has been re-created correctly when the PNRP service started upward. Here is the file for future reference:

  'C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst'.

  Hope this information is useful.