NETGEAR wnr1000-N and WRT610N AP

Similar Questions

• I configured the netgear wireless router and works fine but when I turn the computer power off and back on I can't get connection

  Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3

  Hi Timstimpson,

  It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.
  Try the following:
  1. click on Start and run
  2. type in the box to run services.msc
  3 scroll down and look for the Automatic Wireless Configuration service
  4. double-click on the service and make sure that the Startup Type is set to Automatic
  
  
  Let me know if it works for you!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• SPA2101 and WRT610N

  Hi all

  Before getting my VoIP everything worked fine with my Linksys WRT610.  I have NAT and transfer of facility that allows me to access my network outside port remotely.  I just bought a SPA2101 of my VoIP provider and they told me to install it between my modem and my router.  So I did and now I can't access anything be it outdoors.  My WRT610N router is on x.x.1.1 and my VoIP SPA 2101 is on x.x.0.1 so it doesn't let me do port forwarding in my system connected to my router.  I tried to change the SPA2101 to x.x.1.1 LAN setting and it won't save the settings.  Can someone help me with this configuration correctly.

  Thank you!

  I suggest that you put the SPA2102 behind the WRT610N. make just a customer to the main router.  You may need to do a translation of port but on the router for VOIP. example ports are 5060-5061 and 16384-16482.

  If this does not work, you can always cascade the router and the router just an access point. There are a few kbase articles explaining how waterfall 1 wired and 1 wireless router.

• USB storage, software packages and WRT610N Rev.2

  Hello!

  I have two questions about WRT610N.

  First of all. Is that a firmware update is coming for the second revision of WRT610N? It's been a while since the release of the current version. In addition, Linksys E3000 was revealed and looking into its hardware specification, it is quite same router with a bit of software update.

  And on the other hand. I wonder about the firmwares, because I have little problem with storage connected to the USB port on the router. When I use the SMB protocol to download large files, my wifi connection can be moved, and NetBIOS service was corrected (specific Windows Event Viewer). After restored connection I can't use storage via SMB until you restart. FTP protocol works without any problem, but it is not so convenient.

  It may be the problem with my laptop, but I already tried different versions of the card WiFi driver (it's Intel 3945 ABG), and I can't change my OS (it's Windows 7, and Yes, I tried to clean install). So, I really hope the new firmware or your advice. Someone at - it met similar problems?

  Sorry for my English, I'm not native and thanks in advance.

  Although Ubuntu SMB Server is much more stable and stronger, then the operating system Windows and Windows performs well when transferring file using SMS Service.

  Maybe you can try to change some of the settings on your router, if all goes well, this should help you. Change MTU size on your router for 1300 and click on save settings... Then below click on the "Advance Wireless Settings" sub-tab and below to change the interval of tag to 75, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings...

  Now, check if you are able to transfer large files from your computer to the USB storage...

• Ongoing problem with my Netgear WiFi adapter and hardware software.

  Please help me solve this problem, which still exists.  I even once contacted NETGEAR, but they say it's a problem for six months and it is only cosmetic in that the adapter Netgear WIFI does his job, despite the failure of the adapter Netgear WIFI Wizard appears immediately except to re - install via CD Netgear...  Read on: Although my new Netgear dual-band "N" WIFI ADAPTER works optimally and, out of curiosity, I have re-installed several times using the accompaniment CD... there is a small problem I want to solve: when I click on the WIFI adapter desktop ICON, I get a window of PSI with the message "FAILURE of SERVICE.  Yet once, WIFI actually moved and is also indicated under the programs/features and works perfectly well.  When I bring up the icon under all PROGRAMS, the same result occurs: the same message reappears: "FAILURE of SERVICE.  When I called Netgear to the Philippines call center, support staff of so-called tech advised me to ignore the message and that I was the first caller on this issue, "as long as the WIFI adapter gives you the desired signal quality and speed, just ignore... "When I pressed on others, a supervisor at the call center told me that she would pass on the information that I provided to their engineers to study the problem.  In addition, the supervisor told me that no one had contacted the Center to call on this particular issue.  Yes, I even disabled the built-in WIFI adapters (Atheros), but the 'problem' in question still exists.  Please note that it is a phenomenon of long months and that in the past whenever I clicked on the ICON, the regular Netgear Windows would come upward, including the various hot spots in option, etc. I even updated the software successfully and rebooted the laptop, according to Microsoft's Windows Update instructions.  Please let me know what is happening and how I could fix this ' cosmetic ', if that's what it is, according to Netgear support.
  Thank you very much.
  Joe

  Hello

   
  Have you tried the steps suggested by John from the link below?
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/when-i-try-to-run-NETGEAR-software-for-use-with-my/ae7ae3be-BE62-4742-b9fd-1cf4b8dc3124
   
  If so, then share the results on this thread.

• Unable to connect to internet on laptop using the router wireless netgear WGR614 v9 and windows 7

  My office that I use as my host computer running Windows XP. I have a wireless network works on another laptop also on Windows XP, but cannot get a connection on the second laptop that is running Windows 7. Just bought from a friend. I appreciate any help you can give. The laptop has a Wi Fi sticker on it, so I guess he has the ability to connect. When I try to connect, it will ask me a security key. I put the safety key in and it said possible key is not. Don't know what else to do. If I run an ethernet cable from the modem and connect it to the laptop, it will allow me to connect to the internet.

  Thank you

  precionist

  Hello

  Look in the Wireless Manager and delete everything that is there.

  http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  After cleaning, connect from taskbar tray wireless icon.

  Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

  If the password does not work the newspaper to the router with a cable and restore the password.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• NetGear wireless adapters and server operating systems

  All types of wireless adapters work with the operating system Windows Server R2 2012?

  I have to go to another provider. Thank you!

• Need help to set up the VPN connection using my mobile

  Title: VPN

  I am running Windows Vista 32 with a NetGear WNR1000 router and need some giudance to set up a VPN with my phone Samsung Galaxy G3. Can someone help Sir with these steps?

  Hello

  Thannk you for the reply with the status of the issue.

  I suggest you go ahead and post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/threads
   

• Windows 7 Home Premium 32-bit on a Dell Studio 140g running a NETGEAR WG111v2 54Mbps Wireless USB 2.0 adapt and loses the connection permanently

  I have a problem with this program-it very often loses the connection, so with any live video as a conference, he fall causing problems with, naturally, the frustration on both sides. The router is in another room may be just 25 feet away maximum which the signal passes through 1 wall and offered "free of charge to AT & T TV and Internet clients" so a technician said as saying "it's just a basic router", but the signal goes further to a TV, another 20-foot more away and had no problem connecting unless it is with the AT & T network itself. Even if he reconnects automatically most of the time, but sometimes I have to manually reconnect which can take of time also a lot of time. I had another SATA driver and separate, which was working fine then one day abruptly stopped and now that the driver to reconnect and I was forced to use the old and original driver and I'm back with the same problems. I can't find where it is that I found this other, independent driver, even with a search, and now I have no idea how to solve. I tried all suggestions with Microsoft Fix It without modification done or as it says "no changes have been made, your driver is up to date" and I have tried these suggestions and now I'm here. I also went to CNET to search for a driver, but not luck to everything I've read about the drivers there. Finally, I intend to go with another program called Easy Wifi Radar and I don't know what would be better to use Wifi adapter and since I have a few target (store) [s http://www.target.com/s?searchTerm=wifi+adapter & category = 9975894% 7CAll % 7Cmatchallpartial % 7Celectronics & lnk = snav_sbox_wifi + adapters] I guess I'll take the adapter on their part and their site search , I see a lot to choose gift cards, but who would work better with my system and this program of "Easy_WIFI_Radar"? Any suggestions? Maybe a better deal with another source of in-store/online Wifi adapter?

  Hi David,

  Thanks for posting on Microsoft Community.

  I understand that you have connected the external NETGEAR WG111v2 USB adapter to work with wireless internet and the connection is intermittent.

  Maybe it's because the wireless USB card driver and it is perhaps because of the hardware (USB wireless card) itself.

  Try the suggestions below and see if it helps.

  Method 1:

  You can try to download the latest Firmware utility from Netgear support site and check if it helps.

  Check out the link below to download the latest firmware for NETGEAR WG111v2.

  http://Downloadcenter.NETGEAR.com/en/product/wg111v2#searchresults

  Method 2:

  Dell Studio Hybrid D140G may come with the card wireless in the generation in it, you can try to disconnect the external USB NETGEAR WG111v2 adapter and try to connect to the network card wireless wireless generation.

  To connect to the wireless network, please visit the link below.

  http://Windows.Microsoft.com/en-in/Windows/view-connect-available-wireless-networks#1TC=Windows-7

  Method 3:

  Try disabling your antivirus software that may block the incoming connection wireless.

  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information helps, please reply with the status of the issue for further assistance.

• Netgear Wifi adapter software

  What is the difference between software adapter Netgear A6210_v1_0_0_34.exe AND Netgear A6210_v1_0_0_34 - SA.exe Wifi? The two together for the card Wifi of Netgear A6210 downloaded versions. I'm not one to use to install my adapter.

  Thanks for the reply. "I presume that the"-SA "version is the version with the genius and installed the other version." It seems to install and works fine without any problems.

• Question of trunking GS716T and GS724T

  I have a build based on HP ProCurve switches. #2 has set the VLAN as #1 two of them have own internet streams and are #1 East to shared resources with #2 where one of these internet stream will fail or switches fails it is even WAN communication from any of these VLANS.

  Is it possible to do this with 2 of the GS724T or GS716?

  Thank you

  I think I found what I was seraching for on these two sites:

  http://KB.NETGEAR.com/app/answers/detail/A_ID/11673/~/how-do-i-setup-a-link-between-two-NETGEAR-Swit...

  https://community.Spiceworks.com/topic/248311-NETGEAR-switches-VLANs-and-trunking

• Suggestion for connecting NetGear switch for network home

  Hi all

  Recently, I bought NetGear ProSafe 8 - Port Gigabit Ethernet Switch GS108E. I would like to ask your help/suggestions to connect to my home network. The other components I have is Motorala SurfBoard SB6121 Cabel Modem and Cisco Valet M10 Wireless router.

  I have a Comcast Blast Plus service and if I check my internet speed by connecting my laptop directly to the cable modem, I get 50 Mbit/s Download and Upload of 11 Mbps. If I connect my laptop to the ethernet port of the router the speed I get is 25 Mbps download and still 11 Mbit/s upload. 50% reduction the internet download speed. So I decide to buy a NetGear Switch so that I can run all my connection cable of the switch and wait for the speed of download of 50 Mbps and 11 Mbps Upload.

  I made the connection like cable Modem--> Switch NetGear--> wireless router. In this configuration no my devices are able to connect to internet and I get message unidentified network. I tried to troubleshoot using the Windows Connection Manager, but he just asks me to turn off and on again. I tried this several times, but was not able to solve the problem.

  I want to return to the NetGear Switch mannual and made connections like shows in the quick installation guide. Cable modem-->--> Switch NetGear wireless router. In this configuration, all my devices are able to connect to internet but I get the speed of 25 Mbps download and 11 Mbps upload, identical to what I was getting into when running connection wireless router wired thorugh.

  So, essentially, NetGear switch does nothing for me except give me a few more ports to run the wired connections.

  It would be a great help if someone can guide me in the resolveing of my problem.

  Kind regards
  Shekhar

  He had bought a new router in the first place. Your router is the problem. Check on their website for a solution.

• Not able to connect to my netgear router

  I have my netgear router for almost 6 months now, and he has never given the satisfaction of a good wireless on the attic of my house. Repeaters wifi did not work, or are expensive for dual band. Now, I have connected my old linksys E3000 router, and everything seems to work. But I can't connect to my netgear router. I can't find via the routerlogin.net, nor using the netgear genius app on my ios device. The network is still there, I can connect trough wifi to internet both 2.5 g and 5 g, comments networks are here but I don't know what IP address uses the netgear (I can't find the linksys)

  How can I connect to the netgear?

  and of course I can return to the default settings and start all over again, but it is too easy to answer. How is it possible for me to connect to the router, how I am able to find in the current set up?

  Based on this, I would say that you set r7000 in ap mode and e3000 also in ap mode. Connect through a data cable in the case of PSI.