NetGroup.Connect.Closed before NetGroup.Connect.Success on NetGroup connect when you use local var

Similar Questions

• Have the intermittent connection when you use WiFi and conflict error IP address when using Ethernet

  I have intermittent problems with my wireless internet connection. I contacted the ISP and they analyzed the configuration of the modem-router, changed some and told me to try to reconnect. I try again and the connection is OK. The ISP has caress each other on the back and sent me on my merry way not-so-small. Problem is at an unpredictable time, problems (do) happen.

  Usually the failure scenario does not have a huge problem - plus one
  gene as a problem. I just keep trying to connect through Windows
  Network and sharing Center, and possibly the connection is made. But in some cases, time is critical; I eventually lose 10 to 20 minutes of typing-search-typing-correction-etc in a web form when the connection disappears before making a SHIPMENT. (Some time, after the failed wireless and re - connect, I was actually able to recover pretty quickly that the site has not been exceeded me.) So in this scenario I can't lost any strike.)

  I would like to connect my pc to the internet via an ethernet cable
  the modem-router. I could take this approach right after the wireless
  connection failed. Or in a preventive way, when I know I'll be typing-
  mode of research-type-fixed-etc and I want to be really sure. When I tried this, I get the error "Windows has detected an IP address conflict.

  What I do at this point to get around the Wi - Fi connection and connect through the Ethernet cable?

  The topic is edited for clarity of the moderator.* *.

  [Original title: LOST INTERMITTENT WIRELESS INTERNET CONNECTION]

  It is not clear what parameters your ISP technology management may have changed on your modem/router.  As a general rule, the ISP concerned the link between their server and your modem, but any fiddling with settings that control this link will not effect either on the link between your computer and the modem/router.

  If you still haven't reset your router to its default settings, do not unless you know the necessary internal router settings for you connect to your ISP.  If you have a cable Internet connection, the default settings may work OK, but if you have a DSL, they probably won't.

  You should not get this "IP address conflict" error when you connect the Ethernet cable.  Follow these steps:

  Open the "network and sharing Center" and then click on "change adapter settings".  You should see an icon for your wireless network adapter and an icon for your 'connection to the Local network' (your Ethernet connection).

  • Right click on each of the icons, and select 'properties '.
  • There should be a list titled "this connection uses the following items."  In this list, select "Internet Protocol Version 4 (TCP/IP)" and then click "Properties".
  • The radio buttons to "Obtain an IP address automatically" and "Obtain DNS server address automatically" should both selected.  If this is NOT the case, do so and OK your way out.  Furthermore, cancel your way.

  If a card has been configured to use a specific IP address, your "IP address conflict" should now be fixed (you may need to restart the computer for the change to take effect).

  If cards were already configured to obtain its IP address automatically, the problem lies in the configuration of your router.  You will need to access the router's Web utility to study and make changes.  To help you provide the brand and model of the router of the label on the back or the bottom.  Also do the following to a time where you have an Internet connection:

  Open a command prompt window (type cmd in the search box and press enter)

  1. In the black command prompt window, type the following command, and press ENTER after each line

  ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".

  Notepad '% userprofile%\Desktop\ipinfo.txt '.

  output

  1. In the opened Notepad window, click Edit > select all (or press CTRL + A) and then click Edit > copy (or press Ctrl + C)
  2. In the body of your Question, right-click > paste (or press CTRL + V) the data of the Notepad window
  3. Close Notepad and remove ipinfo.txt from your desktop

• Abandonment of the wireless Internet connection when you use HP G62 PC with HDMI connector to a TV from Samsung LE40C580

  Although I have connected my laptop HP G62 to my Samsung LE40C580 TV via a HDMI 1 meter and everything worked OK. The wireless internet then falls after a few minutes. After removing the HDMI cable, internet reconnects. Could you please provide a solution? I have a wireless full power before and after the stall signal.

  Hello

  What version of the Windows operating system is installed on your computer?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the Internet Connection Troubleshooter and check if that helps.

  Follow the steps to run the Internet Connection Troubleshooter:

  Click the Start button, type Troubleshooting in the search box, and then click Troubleshooting. Under network and Internet, click connect to the Internet and run the troubleshooter.

  Method 2:

  Try to update the graphics driver and check if it helps.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Hope the information is useful.

• oci_close does not release the connection when you use DRCP

  Hi all
  
  We are currently testing the deployment of DRCP with 11g. I have the setup of this (to my knowledge), but I am facing a problem. Oci_close call does not seem to release the connection to the pool, because I expect and that is why we see similar behavior as we receive without using the DRCP.
  
  Our facility is using two instances of CCR 11.1.0.6.0 running, I use PHP 5.1.6 with installed from PECL oci8 1.3.4. DRCP pool is configured and launched, each with 100 servers max.
  
  When the Web server is idle, well, it looks like slow motion.
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 0
  
  
  The script is as simple as that:
  
  <? PHP
  $c is oci_pconnect ('scott', 'tiger', 'IWPPOOLED');.
  $s = oci_parse ($c, ' select * from emp');
  $r = oci_execute ($s, OCI_DEFAULT);
  oci_close ($c);
  Sleep (30);
  ? >
  
  What I expected, it's that the script would be to connect to the pool, doing work for a little while and then release the connection for use by other scripts.
  
  But after I point the browser to the script, I get a 30 seconds time of loading (as expected) but the server is busy all the time, like this:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 0
  2 1
  
  After 30 seconds of sleep, he is released and busy servers are at 0.
  
  If I load the server with ab using 256 connections:
  
  AB - n 1000000 - c 256 k - http://mywebserver/ocitest.php
  
  the pool is at the maximum and links are at a standstill:
  
  SQL > SELECT INST_ID select, NUM_BUSY_SERVERS OF SGS$ CPOOL_STATS;
  
  INST_ID SELECT NUM_BUSY_SERVERS
  ---------- ----------------
  1 95
  2 95
  
  
  My config this service network is the following:
  IWPPOOLED =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.33)(PORT = 1521))
  (ADDRESS = (PROTOCOL = tcp) (HOST = 10.1.16.34)(PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = IWP)
  (SERVER = POOLED)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 5)
  (TIME = 3)
  )
  )
  )
  
  The phpinfo() function will look like this:
  Active oci8 support
  Version 1.3.4
  Revision $Revision: $1.269.2.16.2.38.2.20
  Active persistent connections 1
  Active connections 1
  Oracle Instant Client Version 11.1
  Active temporary Lob support
  Support for collections enabled
  
  Directive value local value Master
  OCI8.connection_class IWPAPP IWPAPP
  OCI8.default_prefetch 100 100
  OCI8. Events on the
  OCI8.max_persistent - 1-1
  Off oci8.old_oci_close_semantics
  OCI8.persistent_timeout - 1-1
  OCI8.ping_interval - 1-1
  Off oci8.privileged_connect
  20 20 oci8.statement_cache_size
  
  
  I use the instant client for 11g
  
  Any ideas?
  
  Thank you!
  Michal

  Don't forget to use oci_free_statement ($s); See "Closing Oracle Connections" in the Underground PHP and Oracle manual. (I was just simplify this example today for the next version of the manual).

  You can also see the "dedicated optimization", where a server pooled in a non-maxed-out pool is retained (except if needed by another process PHP) assuming that the initial process of PHP can become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf

  Feel free to email me (see my profile) offline if questions/data that you don't want to display.

  CJ

  Published by: cj2 on October 16, 2008 08:12

• Unable to connect when you use the router

  OK Ive been using my router for some time and it has always worked a few weeks ago, she decided to stop working, when im connect directly from computer to Internet modem is very good, so my cables and modem and all that is fine. When I connect everything through the router... Router, computer modem to the router, all the lights are show as normally its work, on the router and modem, the network on the computer thing Local didn't tell only / limited connectivity, rocking it back... but usually connectivity IPv4 said Limited instead of Internet

  Things I've tried:

  Unplug everything, turn it off wait 30 seconds... to deceive, dosent work

  Buy new cables just in case... it dosent work

  use LELA 1.6 to try and re-setup/installation/configuration of the router... says I don't have an internet connection

  updated LELA 3.0 or 3.2 I forgot what was it, and it does nothing

  tried to disable the network to try to turn it back on to see if it would help what whatsoever, and it the connection decides to disappear out of my zone connections network completely and then I don't have any internet at all the

  Usually I can solve a problem me when something goes whack with my net, but im lost and im hoping someone out there can help with my problem

  Reset the router...
  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset button for
  another 30 seconds.
  3. plug back in the power and keep the reset button pressed
  for 30 seconds.
  4. release the reset button.

  Then click here to re - configure your router...

• Is blackBerry smartphones there a way to reset the code PIN/connection when you use e-mail?

  I had my Blackberry Pearl 8130 underused and everything worked great except for the e-mail. When I go in to set up my e-mail account, he tells me that there is already an account set up for this device.  Is it possible to reset the phone so that I can put in my own information and set up my email?

  Thank you!  I called my provider and they reset it for me without any problem.  I appreciate your help.

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• Apple TV (9.2.1) removes the internet connection when you try to use Siri

  Greetings,

  I think I saw network related issues with my Apple TV. Everything works fine most of the time. But sometimes, including, but not limited to, when I try to use Siri, Apple TV almost always drops the wireless internet connection. I've included a picture below of exactly what it looks like. I scoured both online that I can but it doesn't look like anyone has the same problems.

  I called Apple support and they suggested that I connect to another source of wifi. I used my hotspot on my iPhone and the Apple TV has worked well without any hitch in the connection. This leads me to believe it's firewall partner.

  However, I have disabled literally of each firewall setting I found in my router and still cannot find a solution. I also use a WAP browser in addition to router which is what my Apple TV is connected to. My WAP is an enterprise-level device, but I'm having issues access to the features of the admin of it network. Before I go and reset my WAP I wanted to get additional advice from people with experience in networking and firewall, especially with services like Siri.

  Thanks in advance. Pics and info of additional device below.

  Michael

  

  

  tvOS 9.2.1 (13Y772)

  A1625

  Zoom: off

  United States

  English

  Hello. I don't think that this has nothing to do with the firewall, etc. When you use Siri, you send your voice via Bluetooth to ATV. If your WiFi signal is weak, the Bluetooth maybe block, if you are using 2.4 GHz. could you try to connect to a network of 5 GHz and see if that helps?

• What is my Skype Id when you use facebook connect

  What is my Skype id when you use facebook connect I can not find not to give people to connect to me thank you very much

  Traore can use your generic name of Skype:

  Facebook:yourname

  where yourname is the name you use to log into Facebook.

• Is it normal in the 6s overheating iphone when you use a wi - fi connection

  is it normal in the 6s overheating iphone when you use a wi - fi connection

  Overheating is an over-used and misunderstood term.

  An iPhone will turn off if it reaches dangerous temperatures.  Leave in the Sun on the beach and you see him give a warning of the temperature and turns off.

  And Yes, all that the phone will give a little heat.  It's basically a fan less computer that uses the metal case as a heat sink to the warmth of the wick away from the card.

• Unable to get into the MSN account or by mail WHEN you use Norton connection for security reasons. I can't add attatchments.

  I use Norton Secure login. MSN & mail is the only site that I can't access. This mind by scary business monitoring, MSN? Sorry ' end that.  I can't add attachments to the e-mail message. Apparently, there are many of us with the problem of attachments. Why I use msn? anyone?

  Hello

  Thanks for posting the request in the Microsoft community forums.

  It seems that you are not able to MSN account or by mail when you use the connection of Norton.

  You can try to disable Norton antivirus installed on the computer and check is that you are able to connect to MSN and email.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  We know if you need help with Windows. We will be happy to help you.

• Win 7 crashes when you use multiple wifi connections.

  Hi Shinmilla,

  I have a problem with Win 7. How did it crash the system when you use multiple wifi connections. How can I stop this from happening?

  Thank you.

  Hi Triode888,
   
  It is not recommended to have multiple Wifi connections since signals can be contradictory and therefore it crashes.
  You can't have several active Wifi connections at the same time.
   
  Also, I suspect it might be caused by your network wireless itself. It could be automatically connected to a network of 'death '. So please check that your wireless network is disabled or no if you do not use.
   
  You have installed VMware or Virtual PC?
   
  If so, these programs will create a new network - please open the network and sharing Center and disable these additional networks.
  
  1. open the network and sharing Center page in the control panel.
   
  2 confirm that it says multi-network right under the icon in the Middle, like the screenshot above.
   
  3. click on the link customize to the right of the first illustrated network, directly under the Internet icon, to display the window set the network location:
   
  4. move the window set the network location away, but let him open. (You'll need it in a minute, but at a time where it is otherwise inaccessible.)
   
  5. back on the network and sharing Center page, click on the link manage network connections (in the left task pane).
   
  6. in the network connections window, select the network adapter through which you get your Internet connection. (The views drop-down list, select Details; you want probably said something like network, unidentified in the status column.)
   
  7. click on disable this device network above (next to the big red X) button. Wait a few seconds for the chart on the network and sharing Center page to reflect the change.
   
  8. return to step #3 set network location window, and click on the merge or remove link network down locations.
   
  9. Despite Vista earlier assertion that he detected "multi-network," you will see probably only a single network in the window of merge or delete network locations:
   
  10. turn highlighted the only participant and then click on remove. (If there is more than one, you can delete all.)
   
  11. When you are finished, close the merge or delete network locations, and then close the window set the network location.
   
  12 return to the network connections window and with the adapter disabled network always highlighted the #6 step, click the option activate this device network (next to the big orange arrow) button.
   
  13. after 10-15 seconds of delay, your Internet connection should work now, signified by the absense of the treacherous of entries multiple networks in the network and sharing Center page:
   
  For more reference in http://social.answers.microsoft.com/Forums/en-US/w7network/thread/272b55ce-fb9a-423b-9a9a-8299f853cc29 look
   
  Aziz Nadeem - Microsoft Support

• I use Photoshop CC and I have problems to use the scanning feature PLC culture and the strraigten.  Other printing features work within the progrram, but no connection when I use don't automate.

  Am I missing a configuration of PLC to allow me to crop and scan several photos?

  With the help of 8.1 with canon MX340 wireless and final version of Photoshop CC.

  Help.

  [email protected]

  VIC

  I plugged a usb cable and I was able to use the WIA import feature and

  the menu of the controller,

  He gave me the opportunity to select the printer and scan using the automaton

  function.

  When I removed the cable, it would not recognize the printer scanner in the

  Wireless mode.

  I tried to restart the system, no luck.

  In fact, when the cable is removed, the function to automate is

  "grayed out" which would explain why it cannot find the scanner.

  Any ideas?

  VIC Ouellette

  K1CGI... QRZ?

  In a message dated 12/09/2015 11:41:18 eastern standard time,

  [email protected] wrote:

  You talked

  by [email protected]

  (https://forums.adobe.com/people/[email protected]?et=notification.mention//forums.adobe.com/people/ [email protected]? and = notification.mention) in Re: I use Photoshop CC and I

  problems to use the scanning feature strraigten and the cultures of the automaton. Another impression

  features work within the progrram, but no connection when I use don't automate.

  in Adobe Community - view [email protected]of reference for you

  (https://forums.adobe.com/message/8274458?et=notification.mention#8274458)

• When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  You should not have a permanent internet connection.  You should only be connected when the software must check whether the subscription is still valid.

• What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  What I must be connected to the internet when you use illustrator by creative cloud? And can I change the language on the trial version if I lay for the paid version? Thank you in advance.

  Francine simply connect to the internet periodically to receive updates and validate your membership.  If you have an annual membership, you can be disconnected until 99 days.  You can find more details in the help of Activation & deactivation.

  I also recommend to review CC help | Install, update, or uninstall applications which deals with the installation of setting language.