SP1 RC rest + mobile pro/wireless 3945 problems

Similar Questions

• Intel PRO/wireless 3945 users - Vista and SP1

  Hello

  is anyone having problems with the Intel PRO/wireless 3945 on VISTA? It worked fine with the embedded version of VISTA RTM but that Microsoft has published patches and updates, my machine became unstable.

  Symptoms are accidents when entering the mode "Eve" (the screen goes black, HD does not stop and finally dreams of fan up to max Fourny..) and the system freezes when the wireless LAN is disabled with the switch HW or FlashCards.

  The problem is very acute with VISTA SP1, and I had to disable the driver. I'm sure that this driver is the issue that I reinstalled VISTA using recovery before you apply the latest service pack 1 (RC Refresh) last week.

  If you use this chip Vista wireless problem, please post your experience and advice if you have auto update in MS patches, especially the KB related to the performance of materials (KB941649 and USB KB941600 etc.)

  Hello

  It is an Intel WLan card. So try to use the Intel WLan driver on Intel page.
  From time to time Intel provides new updates of pilot and mainly the WiFi problems should be solved after an update of the WLan driver.

  Greetings

• How can I rid myself of Intel (R) PRO/Wireless 3945 B & BT open Zone

  How can I rid myself of Intel (R) PRO/Wireless 3945 B & BT open Zone

  Hello

  1. have you made changes on the computer recently?
  2. do you get an error message that is associated with these devices?

  You can uninstall these devices from the Device Manager.

  See the articles below for more information:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658

  How to solve the problems of hardware with Device Manager
  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

  I hope this helps.

• Satellite A200 - Intel Pro Wireless 3945 fall

  Hello
  I have a problem with my laptop Satellite A200 (with Vista Home Premium 32 bit) where the Intel Pro Wireless connection keeps itself turning off after several minutes or several hours of use.

  In network connections, the wireless connection is shown as people with reduced mobility. When I try to enable it, it will say something like "Enable already ongoing attempt". And he's never coming back. However, wireless orange light is always on the cell phone all the time. The only way to reactivate the wireless connection, is to restart the system.

  I know this is a very common problem, I see the same problem among other threads on this forum.

  After a short search on Google, and I see that many other people have the same problem too, particularly with Dell laptops. Forum sites there 2 in particular, that have the most information on this topic, I found:

  http://www.vistaforums.com/Forum/Topic4198-45-1.aspx
  http://thevistaforums.com/index.php?showtopic=9834

  These are the things that I tried to resolve this problem:
  (I got all the drivers from the site http://www.toshiba.co.nz, that I got this laptop from NZ and the specific laptop model number is PSAFCA A200)

  -Updated the BIOS with the latest version.
  In fact, I think that updated the BIOS could be the cause of this problem wireless, or in part. Because a few months back, the laptop kept cutting itself no reason apparent, perhaps once or twice a week. So I've updated the BIOS, which actually fixed the random stops, but since then, I've known this wireless problem. Coincidence maybe.

  -Upgrade to the latest driver for the wireless network.
  I tried a various number of drivers. Later off the coast of http://www.toshiba.co.nz, http://aps2.toshiba-tro.de/wlan/, http://www.intel.com. None of them have worked.
  For the moment, I use the older driver comes preinstalled with Vista.
  Intel Pro wireless 3945ABG (Microsoft) was sometimes since 2006. And surprisingly, this one works best. Drop-outs are not as frequent as more recent drivers, but the problem still happens.
  With this new drivers (dated from 2007), I find that it turns off several times a day. Once or twice an hour.
  With the former, once every two hours.
  That's what I feel, it is probably coincidence.

  -Update of Windows Vista with service pack 1.

  -Updated the firmware on my router. It is a DLink G604T. However, I doubt that it is one router problem, my other laptop running fine without any abandonment wireless.

  -Power WLAN disabled economic option.
  Under power settings, select the setting of maximum performance.

  -Set lowest roaming aggressiveness, even tried with highest.

  -On the "Power Management" tab in the properties for Intel Pro Wireless 3945ABG Network connection, tried to activate and deactivate the option "allow the computer to turn off this device to save power".

  -Done a full virus/spyware scan.

  -Uninstalled the software Toshiba Wireless Zero Configuration.

  I think I've tried just about everything that I can, so I'm here pretty much as a last resort.
  I hope someone can help me solve this problem.
  It was so annoying since many months now! It's not fun to have to restart the laptop all the time.

  Thank you.

  I see that you have tired most of the things that I would say too
  You said that WLan works better using the old driver Wlan MS if it s really a WLan driver problem

  But what said
  I searched a bit in the MS knowledge base and found this article:
  + Several problems occur on a Windows Vista-based computer when you work in a wireless network environment.
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932063

  Check it out.

  But a friend of mine had a similar problem of Wlan and nothing helped, he did a update BIOS, set the Wlan driver, etc.. nothing!

  Finlay, he changed WiFi channels.
  He chose the other channel on the router and wireless network and since then the Wlan card works well...

  Maybe it s worth a try!

• 6800 with Mac Officejet Pro Wireless printing problem

  Hello

  I use a 8600 Officejet Pro with a Mac on Mountain Lion

  He was fine and now will not work wirelessly with mac, macbook or Ipad.

  I have double connections wireless enabled and all on the same network, but will not see printer when I try and add it again.

  It works fine when connected by usb

  Any ideas please?

  Thank you

  R

  The printer is always connected to the network?  Check by going to Configuration > network on the front of the printer and network Test search and print.

  What router are you using? You've restarted it by pulling on the power cable?

• WRT54GS - wireless performance problem

  Dear someone

  I am currently having performance problems with my WRT54GSv1.1

  Just received my new internet connection to 30Mbit. Unfortunately, I am not able to download at that speed. If I connect via one of the linksys router's ethernet ports, I'm a happy person, but using the wireless makes me a little less happy.

  Wireless: 15Mbit/s

  Through the cable: 27Mbit/s

  Network information:

  The distance between the router and the computer laptop 3-4 meters

  Linksys WRT54GSv1.1 - Firmware Version: v4.71.4

  Network wireless - g only mode

  TV - 6 (because all the surrounding neighbor use 10-11, I noticed using Cain Abel & wireless discovered 4.9.29)

  Security: WPA2-Personal (TKIP + AES)

  All other settings are default (just reset to the factory settings).

  Laptop:

  Windows Vista Business SP1 32-bit

  Intel PRO/Wireless 3945ABG (installed the latest drivers from the website of intel, default settings)

  When you check the diagnostic of Intel tools, it tells me the link is 54 megabits and pushes meter packages of 54 megabits, while all lower speeds remain the same.

  More diagnostic information:

  Percent missed beacons: 0

  Percent transmit errors: 18

  Current Tx power: ~ 32 mW (100%)

  Supported power levels: 1.0 mW - 32.0 mW.

  Hope someone can help me here.

  Thanks in advance!

  Kind regards

  Ski Klesman

  Although wireless g "connects" to 54 Mbit/s, the maximum possible wireless "data rate" (in ideal laboratory conditions) is only about 20 to 25 Mbit/s.  Unfortunately, the phrase "in ideal laboratory conditions" generally excludes home intrusion!

  The aerial transmission for wireless connections is higher than for wired connections.   Thus, most individuals find that their Wi - Fi connection works at 50% to 70% of their speed of wired (LAN).  Your wired LAN being 27 Mbps connection speed, your 15 Mbps wireless speed is within normal limits.

  You might be able to tweak a bit more speed from your wireless network by optimizing all your wireless settings.  Here are a few suggestions:

  I guess you want actually to WPA2 encryption.  If so, set to AES only.   When you set the router to TKIP and AES, you actually tell the router to accept a WPA or WPA2 connection.

  Also, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  If you continue to have problems, try the following:

  For wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  I hope this helps.

• Intel pro wireless 2200BG doesn't work

  I installed an Intel pro wireless 2200BG mini PCI card on my Satellite 1900-303, everything looks OK, but it says hardware turn off switch is on but the led remains off and the Wireless does not work

  Hello

  Have you checked the State in Device Manager? There is a yellow question mark? If there is no problem with the right mouse button you can activate it.

  If there is no green light try anyway to make connection and check the functionality of the wireless card. Perhaps is the lack of green light.

• Intel/Pro Wireless hangs at shutdown

  Hello world
  whenever I have stop my Toshiba Satellite A 100-151 the Intel/Pro Wireless software crashes and stops the windows xp shutdown process.
  anyone else with this problem or maybe: How can I solve this problem?

  Thank you from berlin, Germany
  Stef

  Post edited by: scordes

  Hello Stefan

  If you turn off the wireless LAN using the WLAN switch on the right side of your laptop the laptop turns off properly?

• Satellite A100-784 - Intel PRO Wireless 3945ABG off randomly

  Hello

  I have Toshiba Satellite A100-784 with Intel PRO Wireless 3945ABG wireless adapter.
  Today I was working with my friend on some project connected on his wifi sharing internet connection on Toshiba Satellite A100-510.
  After a while I lose the internet connection and I see that this blue icon is no longer in the test system.

  I try to use Toshiba ConfigFree but it was impossible to open, so I try to open the network connection of the control panel and after a period of time the network connection has been accessible and I saw that this network adapter is disabled. I try to activate three times but nothing.

  After rebooting, everything was ok and wireless adapter is turned on and ready to use for the next 10 or 15 minutes.
  First disable comes after two hours. I use Windows XP SP 2.

  The problem is that I have to restart my computer everytime where I lose internet connection (WiFi is turned off automatically).
  Everything is blocked its very hard to access the settings of network or toshiba configfree

  Thank you

  Try this:

  Update the BIOS of the laptop
  Update driver Intel Wireless LAN
  Use static IP addresses, instead of dynamic (DHCP)
  Temporarily disable your firewall software
  Update the Firmware on your Access Point

• Turn on Intell Pro Wireless 2200 card we on a Satellite A30-514

  I recently sent my laptop away for repair and they put a card Intell Pro Wireless 2200 in my laptop but I don't know how to turn it on.

  I flicked the switch on the side, but no light appearing and FN + F8 it does not turn on either.
  He made his appearance in my network connections all the time but when I go looking for networks it says: "Please power on the map use the hardware switch wireless.

  Help, please

  Simon Wakeford

  Hello

  I have the same problem with my A200-14F. I install WinXP SP2 and I update my bios - my Fn keys work but I can't turn on my Intel Wireless WiFi Link 4965AGN (I have to use my hardware switch to enable it).

  Can anyone help

  Thank you

  Nenad Pesic

• Intel Pro 2200BG has problems with stay connected

  I recently bought our laptop, and we have an Intel Pro Wireless installed BG2200.

  When I connect to broadband with the network cable I have no problem, but as soon as I swop on the wireless, I have big problems. The wireless to connect and disconnect a few seconds and repeats itself until I have disable the wireless settings. I tried to reload the software, without success, unless I'm loading the wrong software. I tried to load the IP, while it is fixed, which did not help.

  Someone at - it suggestions for helping me get my wireless problems solved.

  Thank you

  Hello

  Who is your internet service provider? If it is BT, or even if this is not the case, you could try this:

  http://support.Microsoft.com/kb/933872/en-us

  See you soon

• My HP Officejet Pro Wireless is not printing black even with a new cartridge.

  My HP Officejet Pro Wireless is not printing black even with a new cartridge.  Help!

  Hello

  Of course check that the cartridge is very savvy.

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Intel pro/wireless 2200bg will not connect or is very slow

  I just do a fresh install of xp pro and my intel pro/Wireless 2200bg has no connectivity.  I downloaded new drivers, but nothing works.  I bought an external card of bg and it works perfectly.   I have a thinkpad t43.  All downloads came from levono or intel.  What can I do?

  Hi TimWiegel,

  You can run the Intel® Wireless troubleshooter from this link & check if the problem persists.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025779.htm

  
  Reference: Why am I not able to connect or stay connected to my Wi - Fi network?

  Hope the helps of information.
  Please post back and we do know.

• Intermittently lose connection WiFi. XP Pro, Intel Pro/Wireless 3945ABG

  I recently recovered from a nasty virus and my computer seems back to normal except an annoying problem. Periodically, I lose my wireless connection. It happens on multiple networks, so I know it's the computer. I updated my drivers (all who were on the Dell support site specific for my service tag) and still not fixed. I used to be forced to restart, but now (after the driver update), I can use the Device Manager to disable, and then enable the wireless adapter and the connection returns every time... but its obviously annoying.

  Any suggestions would be helpful. I have a Dell Latitude D630 running XP Pro. The
  card is an Intel PRO/Wireless 3945ABG. Thanks in advance.

  You may not say anything on the power saving mode, but the link you posted has done. None of these things worked anyway.

  However, I found a solution that others may find useful. Apparently the Dell Web site is not exhaustive with regard to the pilots. I found a update for my driver wireless on a third party site, Drivermax.com

  After the update, the problem has been resolved. DriverMax is an application that is free to download and much appreciated on download.com

  Free version allows only download driver per day, so be sure to choose carefully.

  Lesson learned: sites Web of manufacturers is not always the best place to find updates driver

• wireless connection problems vista adapter usb wireless 802.11 b/g #2

  my HP pc used to connect to my internal wireless, no problem. I know the wep key and had several hours of navigation...
  I move for a year, come back. apparently my PC doesn't connect now... in fact, it won't even connect with a CABLE!
  He repeats to me ' identify with. "
  Well, Vista has been updated since and I've been usng a mobile dongle (at GREAT expense!) to try to update, but now I'm sick of the cost and I need internet access appropriate again!

  Thank you for responding Srinivas
  I don't know the model but it is a HP, three or four years now.
  I had all sorts of messages of "not able to connect" and limmited conectiviy... I'm sure I had a relative at all simply have no connection
  the browser, I would have used that I had connected would be Firefox, but it has yet to get to the point that I was getting nothing. bytes sent might be higher than anything but received nill.
  at the time, I was unable to get ANY connection NET... for all intensive purposes, I've been totally disconnected

  I had tried everything that arises, each suggestion had windows, but it made no difference... even a connection WIRED sitting to 'authenticate '.

  Odly enough, who are seeking to solve a problem with my scandisk is not not be able to access C drive I have run "services.msc".
  looking through everything that might stop the player access, I found that the DHCP Client does not work... I made sure it runs automatically and (because I checked my settings of a few hundred times) the network came as a light!

  I don't know what turned it off because none of the programs I run affected before (I haven't installed any new programs since then be disconnected from the network)

  Thanks for the reply. I hope this information helps in similar cases in the future :)