NetMonitor Blackout

Similar Questions

• Equium A60: random screen blackouts

  Hey guys & girls,

  I recently bought a P4 A60 satellite at Christmas and since then I ve had a small number of growing problems and I was wondering if anyone knows the same thing?

  It only worsened recently when windows XP home wouldn t start so I had to use Norton ghost to transfer my work off the laptop computer via a network of my home machine.

  After inspecting the safe mode boot log, the computer seems to keep the gel and then restart on an ati.sys driver, but before that I ve had a lot of problems with my screen so I m wondering if it can in fact be hardware related?

  symptoms: random screen blackouts (having to close the lid and reopen it to do to turn around).
  Unexpected windows failure when loading the ATI drivers to the windows startup.
  When I went to use the Toshiba Recovery DVD the screen turns off and he won t come back.

  Help, please

  Tom

  [Edited by: admin August 6 05 08:12]

  Hello Tom

  On this path, it is not easy to say why all this is happening, but after the recovery procedure, everything should be ok again. If there is no success after the recovery procedure you should contact the Service partner. The device has a valid warranty and all costs will be covered.

  I guess the recovery procedure is known to you. Honestly I n t understood exactly what you hear with the screen turning off the coast guard and he won t come back. Can you explain to me exactly what happens if you want to retrieve the unit?

• Screen blackout Satellite A series

  A few weeks ago, I very kindly filled a questionnaire online for Toshiba. The theme was: "it is now more than two years and it still works. A week later a big boost two line appeared in the middle of the screen! My last laptop of a different manufacturer lasted me five years and my beautiful has now used for two or more without event.

  I thought I would say Toshiba out of unhappiness. I logged onto the Web site support pages and looked for information 'contact us '. Nowhere to be found. Therefore, it seems that I need a new laptop.

  It is very a pity but what to say. Each notebook is a high-end product and I think that a hardware failure can still happen.
  To avoid a disadvantage, I always recommend buying an additional guarantee.
  In this case, the warranty will cover everything.

  In just a few words about the blackout;
  Well, it sounds like a GPU (graphics chip) fault.
  But to be 100% sure, you can connect the laptop on the external monitor. If the same appears on the external display so you can be sure that it is a graphics card failure.

  Unfortunately, the graphics card is set on the map and it of not possible to remove only the GPU. In this case, the entire motherboard must be replaced.

• my iphone 4S got completely blackout curtains but I can hear his warning and siri voice .kindly help

  my iphone 4S got completely blackout curtains but I can hear his warning and siri voice .kindly help

  Try to reset your device: hold the home and power buttons at the same time and continue to hold until the Apple appears (up to 30 seconds). Once the Apple appears, reboot is underway, and the Slide to Unlock screen should display in a short time.

  See you soon,.

  GB

• Pavilion Slimline s5-1540: computer keeps "blackout."

  My computer has been "blackout."  By that I mean the screen will go black on the screen, but I don't think it's the monitor that is the problem.  All the busy lights turned on (the modem U-Verse, the monitor and the computer itself) and when the monitor comes back I'm in the same place I was when it came out.   This lasts only a second or two, but it worries me.  Do you have suggestions as to how I can know what is the problem and why it happens?  The computer was purchased March 29, 2013.  What is the monitor?

  Hi Professor, I did the Malwarebytes scan, I checked that the driver was updated for this and I do not use of Norton Internet security, I have Vipre.  I did all this before I contacted HP because I have nothing to pinpoint the cause of these black found outs.  I also contacted Acer support and chatted with a nice France Mr on the causes and he almost asked me the same questions.  After all that I did and that was suggested by everyone I contacted, I have no answer.  Perhaps the monitor is just exhausting and is not a good fit with the computer more because the computer is not that old (we bought the monitor in 2009 and the computer in 2013).  I assume that there is only one solution, an expensive however.  My birthday is coming up so maybe I can get a new monitor then.

  Thank you all for your help,

  Gene "Catra' Gore

• System random blackout curtains

  Hello
  My computer seems black out randomly. The duration of use varies greatly and there doesn't seem to be a reason for it.
  Power outages usually occur after many hours of operation and an occaision it took place while I was faced with the screen of reading a web page, but not actually 'aid' the mouse or the keyboard.

  The time between turn it on and blackout curtains is unpredictable but is often many hours rather than near the departure time upward.
  No warning is given, the system turned off just as it would if the plug was pulled from wall however power screens light shows this isn't the case. If I press the button 'ON' again once the computer restarts from scratch without any difficulty, but a warning that the system will not stop correctly appears and files are then checked to find errors in the planned way.

  I backed up all my files on an external hard drive as a precaution.
  Power connections appear to be good and no power outage on power circuits were noted.

  My belief is that it is a hardware problem, (what a thermal fuse?) but it is possible that there may be a updated software in the wrong place, but I would appreciate any suggestions to remedy this problem before I release the machine in the hands of the high street techies.

  Thanks a lot waiting for a constructive response.

  dJ.

  Tell us what 'black out' means to you, of course, we understand what you see.

  If your system seems to be working and then it closes off completely and you should use the power button to get there again and it does not actually start the XP reboot again, a process that resembles a heat problem (too much of it).

  If your system seems to be restarted on its own, you have another problem, so what's going on or not?

  With a thermal cutout, it's generally not going to be any trace of him in the log files - just the CPU stops before he can write anything out if you let the system sit for a while, he can freshen up and last a little longer, and it can start right up again and turn for a while.

  I would not go through this process to uninstall your drivers video until you know which video drivers you have and then you can see if you need to update or not.  That makes no sense at this point.

  I would go through a process to ensure that your system is well ventilated and all vents are clear and that cooling fans that you actually turn.  Since we do not know if you have a desktop computer or laptop, this is something we can not tell you too much about.

  If you have a desktop computer, there is probably a fan on top of your CPU and maybe on your video card and maybe integrated into the case - they all need to be cleaned, blown out and checked to make sure they are all rotating when you are turned on.  You also need to "lubricate" your CPU heatsink with thermal paste if it came loose or dried out.

  If you have a laptop, laptops are not designed to run in your lap, because that could block the ventilation.

  If you can, I also check all connections and cable to be sure they are secure.  Remove or disconnect everything that will come lose without too much force and put it immediately to do just one thing at a time, so you don't mix.  If you can get to the RAM chips and you have separate I/o cards, get one at a time a reinstall them to make sure they are well connected.

  If you think that the system could close more regularly when you make video intense things like watching videos or playing games, so maybe you need to get some fans better who move more air through your system.

  You might also have a problem with your power a supply overheating, but I would start with the easy stuff first.

  Here is an article that can help you get started:

  http://www.bleepingcomputer.com/tutorials/cleaning-the-inside-of-your-PC/

  You do not want your system to look like these examples:

  http://www.theregister.co.UK/2009/11/13/ventblockers/print.html

  Now tell us about your system, and we can also see what your situation of video driver:

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now make some clarifications:

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• HP 1512: printing hp 1512 is blackout

  lose to much ink. Print selection box is blackout. Need to print the entire page instead of the selection.

  Hi @kellyrider,

  Welcome to the HP Forums!

  I noticed that you lose to much ink, and the box for the selection of printing is blackout. Also you have to print the entire page instead of the selection. With your HP Deskjet 1512 on Windows Vista. I'm happy to help you!

  A few questions for you, if you don't mind:

  1. What is the name of the program that you want to print?
  2. This happens with all programs, or just one?
  3. What happens if you try to print with Notepad? Print selection is blackened?

  In the meantime, I recommend trying our HP print and Scan Doctorand let me know what happens!

  I hope hear from you soon!

• Don't get in front of the Windows login since the blackout screen

  Original title: startup in Vista

  I am running Microsoft Vista and had a blackout.  Now I can't get back Windows beyond the log on screen.  The system came pre-installed.  Any suggestions?

  Hello

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
  in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
  air vents. Check that fans are working (before and after opening the case). When your laptop on all the
  You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
  test).

  Check with a real computer store (one that makes its own service internal and not of leeks)
  and displays a Best Buy or other stores) or system manufacturer support. Also
  Ask in their forums known problems (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Pavilion dv9535nr - monitor shows lines with different colors, and then turns into blackout curtains

  I have a strong desire to help my father who is a sailor searching for an answer regarding his problem with his laptop.  His laptop is very important to him, because he uses this fact to his work, particularly in the preparation of reports and other kinds of things. They do not have Internet connection that's why I'm the one who send right now for this message.

  The problem is that the laptop has no display after having turned it on, it just show a few colored lines, and then after a while, the monitor is totally blackout curtains.  My father tried to use his laptop, even if it does not display, he provided his password and had pressed enter and heard the sound of the operating system. The sound he heard was similar to the sound at the start of the BONE.  He even tried to close the session blindly and he could again hear the sound you hear when you connect on a Vista operating system.

  I would like to ask if the problem is on the LCD screen, video card or even with the software? If it's a hardware problem, could you tell if my father could buy the piece of hardware he'd be able to fix his laptop?

  If you have ideas to share, I'd be very happy.  Thank you in advance.

  OK, I'll post my message here.  Thanks for the tips! Have a great day!

• Netmonitor agant...

  I want to use the netmonitor agent to warn the systems down.  How can I make in the servers (more than 300) without going into each of them.

  Hi James,

  The best way to automate the configuration of the agent is to use the Foglight script feature.

  There is a useful blog about adding a device to the NetMonitor list in the community: Update Foglight Agent properties using Groovy

  Here's a sample script that creates a list of the NetMonitor devices with four devices:

  These three elements update newListName = "newDeviceList". groupName = "newDeviceGroup1." Their = ["device1", "device2", "device0", "device3"] cs def is server. ConfigService newList = cs.getNamedConfig def ("SPI", "NetMonitor', newListName") If (newList == null) {} If the list of named unity does not exist, create it defaultList = cs.getDefaultSecondaryAsp ("SPI", "NetMonitor', 'netDevList'") newList = cs.cloneNamedConfig (defaultList, newListName) } If the list has been created before, clean existing = newList.getRows () .collect {computer}) If (existing! = null) existing.each () {newList.removeRow (it)} for (device in their) {} Add a blank line line = newList.prepareEmptyRow) Configure the properties selected line row.setValueByString ('serverGroup', groupName) row.setValueByString ('Device_name', device) newList.appendRow (row) } cs.saveConfig (newList)

  If build you on these resources and add improvements (e.g. read group names and the names of devices of a file) Please post an update.

  Also, check out the dashboards customized to see NetMonitor device availability. These dashboards will give you the good visibility of the availability of your servers from 300 +. Be sure to specify the names of significant for these devices server group, as this will make them easier to manage and view.

  Kind regards

  Brian Wheeldon

• Remove Blackout schedules

  Hello

  My apologies if this is so obvious, but I can't find a way to do it!

  I created a test blackout calendar in the NMS (Configuration |) The administration | Blackout schedules). I need is not it, but how do I get rid of him? When I return in the calendars of power outage, there is the option "Create new calendar of blackout", but nothing to delete. If I go into the calendar itself, there is no way to remove the blackout. I choose anything in the timing of the blackout:

  Thanks for any help

  Brian

  Hi Brian,.

  You must use the keyboard delete key.

  Thank you

  Mario

• Availability of the monitor with Netmonitor

  Hello

  I'll put up Netmonitor for monitoring some devices. Until now I just he followed a single device to test. For some reason it isn't send me an alert if I cut the communication to the device. All the settings are default, and made sure the rule is enabled. I don't know I'll be facepalming here in a minute when I have someone pointed out something quite obvious, but I am at a loss at the moment. I disabled the network card on the device, I'm following up on 15 minutes ago but still not alert. So far, I have installed the cart of the OS, created the Netmonitor agent and activated, edited the list of devices to include the device I want to monitor and make sure the rule is enabled. Is there another step I'm missing?

  Thank you

  Ryan

  In this case the error looks a bit different, looks like there is no list of devices, you can start the agent and then edited the list of devices (which requires a restart of the agent).

  Can you please disable the agent and reactivate it?

  You can also publish a snapshot of the screen that displays a list of devices?

  If you are not comfortable posting on the community, you can send it to me [email protected]

  Golan

• Groovy for import to NetMonitor agent hosts

  Hello

  Somebody wrote a groovy script to take the contents of a csv file (file or other) and used to configure Foglight.

  I have a CSV file of the hosts who need supervision with a NetMonitor agent, I have a few groovy to update the agent, but I fight with the bit to read the contents of the CSV.

  There is a nice library of OpenCSV, but I can't seem to load (it is probably because of the way Groovy has been implemented in Foglight), any person responsible for the libraries of addition in Foglight groovy scripts?

  http://www.kellyrob99.com/blog/2010/07/01/Groovy-and-CSV-how-to-get-your-data-out/

  See you soon

  Andy

  What about using a table of database as a data source (for the groovy) rather than the CSV file?

  You would need a script to load the CSV file into the database and on the side table FMS of things, use a simple rule to run a script on a schedule to remove the information from the table and update the lists used by NetMonitor.

  D.

• Problem with Netmonitor

  Hello

  I'll put up Netmonitor for control devices (FMS 5.6.10). But when I activate the Netmonitor agent have a warning in the log file:

  Agent log: NetMonitor Agent WARNING: 10.1.172.25 pong::pong: could not resolve the IP address of the host: HOST name

  2013-11-12 16:45:54.352 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: network device not found: hostname = pong::pong error: could not resolve the IP address of the host: name of HOST-1

  2013-11-12 16:45:58.399 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: network device not found: hostname = pong::pong error: could not resolve the IP address of the host: name of HOST-1

  2013-11-12 16:46:29.430 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: HOSTNAME pong::pong: could not resolve the host IP address: name of HOST-1

  2013-11-12 16:47:00.446 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: HOSTNAME pong::pong: could not resolve the host IP address: name of HOST-1

  2013-11-12 16:47:00.477 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: network device not found: hostname = pong::pong error: could not resolve the IP address of the host: name of HOST-1

  2013-11-12 16:47:00.508 ECHO WARN [JFogbankAgentSocketListeners [22] - 8] com.quest.glue.core.jfogbank.JFogbankAgentImpl - Agent log: NetMonitor Agent WARNING: network device not found: hostname = pong::pong error: could not resolve the IP address of the host: name of HOST-1

  Please, help me.

  My apologies for the problem.

  Allows you to open a support case as soon as possible, I am convinced that the support will be able to solve this problem.

  Golan

• Getting started with netmonitor

  Where am I going to netmonitor configuration? I have the infrastructure installed cartridge v5.6 foglight.

  I would like to configure netmonitor for availability of device report, as indicated in this article: http://communities.quest.com/docs/DOC-12677

  This is the file you need to download it from the support site.

  

  When you open the .zip file, there because different files for different operating systems, you must download on the inventory of cartridge that is suitable for your OS.

  

  Once you do this, you need to deploy the package to her agent to agent manager target.

  I've seen (especially on windows) cases where the target OS was not correctly and the operating system package NOT included in the list of available packages, in this case tick the checkbox 'Show packages for all platforms' and it will show all the packages that are.

  

  Once you have installed the OS package inherited, you can create the netmonitor agent.

  Hope this helps

  Golan