Don't get in front of the Windows login since the blackout screen
Original title: startup in Vista
Hello
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-US/Windows-Vista/What-to-do-if-Windows-wont-START-correctly#.
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Remove ALL power and reinstall all the memory cards and cables (both ends where possible).
in fact, remove and replace - don't do not just tight. Remove the dust bunnies and clean the
air vents. Check that fans are working (before and after opening the case). When your laptop on all the
You can do is to reinstall the memory and clean the vents (still may try to add a small fan as a
test).
Check with a real computer store (one that makes its own service internal and not of leeks)
and displays a Best Buy or other stores) or system manufacturer support. Also
Ask in their forums known problems (if any).
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I don't get iis option in the Add/Remove windows components window
I don't get iis option in the Add/Remove windows components window...
I install iis to another softwareThis might help:
-
I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.
Hi Bill,
Thanks for asking this question to Microsoft Community.
I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.
What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?
Here is a link that provides information on connecting to a projector. Go through it and check if it helps.
Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.
-
Try to install e-printer on a netbook... don't get a message on the spooler service. What is the spooler service?
Hi Pat,
Spooler service manages print jobs by saving in a queue and submit them to the printer in order specified instead of sending them directly (which can cause the printer back up if too is sent at a time depending on how printing is setup and the printer works).
Try the simple fix to see if it works. Go to start / Control Panel / Administrative Tools / Services and place you on print spooler and double-click it. Click the Dependencies tab, go to all the services listed there and confirm that they are automatic and started. If this is not the case, change it to automatic, and then restart them. Once finished, return to the print spooler and set it to automatic and start it. Click OK and close out Services and control panel and restart. When you come back, come back to Services and check that the print spooler again told automatic and started. If this isn't the case, after back and let's check other things. If so, proceed to the installation of the printer, and this particular problem should no longer be a problem.
I hope this helps.
Good luck!
-
When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?
Hi Giovannil27088677,
If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%
-
Why I don't get a response from the Dept. serial number already contacted them twice with ZERO response. I have included my product code and proof of my job as requested but nowt is back!
Kingussie81 that I saw the account that you used to post on this public forum and your Creative Suite 5.5 Design Premium education serial number is registered under your account at http://www.adobe.com/. For more information on how to locate your serial number registered please see quickly find your serial number.
If you need to download a new copy installation files, they are available to Download CS5.5 products.
-
After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password. The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '
(the system is running pre - SP1)
Hello
Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135
Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.
-
Get a warning from the blue screen on my Satellite L300
Lately, I've been making a warning of the blue screen on my system, and then it restarts automatically. I copied the info.
Any help would be appreciated! I don't know what it all means. :))Product
WindowsProblem
Stop unexpectedlyDate
25/10/2009 09:09Status
Report sentSignature of the problem
Problem event name: BlueScreen
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 3081Files helping to describe the problem (some files may be is no longer available)
Mini102409 - 01.dmp
SysData. XML
Version.txtAdditional information about the problem
BCCode: 9f
BCP1: 00000003
BCP2: 84683030
BCP3: 86AA6030
BCP4: 85B 15008
OS version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Information about the server: 46689d9f-cdf1-40e7-a52c-7380a7ec7727Try:
(1) test the RAM. www.memtest.org (CD or Bootable floppy)
(2) use a system restore to return to a previous state. -
I don't see an option in the second screen on the screen to connect to
I am trying to connect a second display to my iMac, but when I try and turn on the 2nd screen I get a message "no signal detected".
I went to the display, but it does not seem to show the ability to connect another screen.
I would appreciate any advice. Thank you
What kind of cable are you using to connect.
You use something like this https://www.amazon.ca/gp/product/B007N63NAI/ref=oh_aui_detailpage_o07_s00?ie=UTF 8 & PSC = 1
or something like this https://www.amazon.ca/gp/product/B00APLJ58M/ref=oh_aui_detailpage_o05_s00?ie=UTF 8 & PSC = 1
Kim
-
PSE getting hung up on the opening screen?
My PSE 8.0 begins to open, but gets hung up on the "building of the TWAIN menu items" is part of the blue screen. I did a force close and restarted my computer. No change. So I uninstalled and reinstalled the software, but it will not always clear the checkpoint!
I'm on date limit & start a minor freak out...!
If you do not use a scanner; change the file name Twain can help.
-
Vista does not not in front of the Welcome screen
Hello, I installed Norton 4.0 and it ran yesterday on my PC, and this morning when I came to start it, it won't load up Vista past the Welcome screen. The screen is a blue baby solid. I could go in safe boot mode, but my programs do not run here. Need help please.
To perform a system restore, please see the following article:
-
I've been plahying lonely spider offline for many years on this computer. All of a sudden when I click the icon of the spider I can hear it loading but it loads behind the screen. I can go to start program... Hearts... in offline mode and it appears normal for me to play. Spider Solitaire is not scores by going to the start. programs etcc. I don't know how it appeared originally. I hope someone can help... I am addicted and need a fix... Grandma
Hello
-What operating system is installed on your computer?
-Did you change on your computer before the show?Assuming you are using Windows 7, I suggest you to follow these steps and check if they help.
Step 1:
Make SFC scan and check if the problem persists.
Step 2:
Perform a System Restore to the point that it was working fine.
-
I just restored back to factory settings and it was working fine until I loaded Windows live messenger, Microsoft Security Essentials and Sony Picture Utility. After that he stopped begin again, so it can be used only in safe mode. I downloaded all the drivers and updates available on the dell site. Any suggestions welcome please!
If you did a restore to the factory settings and you still have problems, there may be another problem that caused the problem in the 1st place.
Uninstall programs > reload one at a time > find the problem.
And look to see if a trial anti-virus came with the Dell recovery process.
You must have AN antivirus installed; otherwise it may CRASH.For Startup Repair Help, make a record of Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
See you soon.
Mick Murphy - Microsoft partner
-
Entering a URL in the address bar and pressing on enter does nothing. Or the 'enter' key or 'address arrow bar', to go to the site function. Web site does not load and no error message appears. 'Enter' key works very well in the FF and IE search box, is not my keyboard.
Tried most of the recommended fixes under the "Error loading websites" article with the exception of "DNS refetching", as typing "about:config" in the location bar does no good as the "enter button" won't function. I've removed and re-added FF back into the windows firewall, removed ZoneAlarm from my system, edited proxy settings, deleted and reinstalled FF several times. NOTHING WORKS!!! I'm a die hard FF fan and this is KILLING me. Please HELP!!!
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
I had to restore my computer, and now printing and photos are much smaller than they had been. When I increase by 150%, game screens are not increased accordingly. The real playground, is still small and type too hard to read.
Hi MaryLeDuc,
This problem is limited to any game in particular?
Method 1: You can follow the steps described in the section below to start the video display troubleshooter
Resources for troubleshooting problems in Windows XP
http://support.Microsoft.com/kb/307960
Method 2: check the steps mentioned in the article below
Troubleshoot display with Microsoft games
http://support.Microsoft.com/kb/263039
(Article apply to Microsoft games, steps works great for other games)
Maybe you are looking for
-
Poor streaming HBO now, when it be fixed?
Why the State excessive buffering and the glitches on HBO now when all the other streaming applications (i.e. Netflix) works fine on Apple TV? This has been well described on the web, for the last year. When will this app be fixed?
-
After say - and reconnecting battery CMOS, power supply T400s has stopped working
Hi all A few days ago, I had to say and then plug back the CMOS battery. After putting my T400s back together, the power supply in power did not work more (the computer is plugged in and power cable works fine with other computers, but it will not pr
-
I RECEIVED an SMS on my phone cell phone YESTERDAY THAT SAID: [FROM 760-821-5915] "Dear Walmart shopper, your purchase last month won a $1,000 gift card. Click here to apply: So I think it's almost certainly a lie, but I thought that he would do no
-
Need driver for Labtec WebCam Pro to Windows 7
Need driver for Labtec WebCam Pro to Windows 7
-
Disable shake them without administrator privileges
I want to disable shake on my work computer, but I have no privileges to administrator, and themes are locked. Is it possible to disable it or adjust sensitivity settings to prevent it from spinning accidentally?