NETWORK backup is not responding

Similar Questions

• Since the change of my name to network my printer not responding

  I recently changed my name not my canon mp620 network see continuous coming printer does not

  Should we assume that you are using the printer wireless?

• Causing the system RMAN backups for not responding

  Need some help here. I inherited a system in which has about 65 GB memory, Linux 64 - bit - 16 processors. Whenever an RMAN backup is performed, else cannot do anything. The load average is about 10 (max). My theory is that it is the init.ora parameters, but not sure... Here's the deal:
  
  SGA_MAX_SIZE = 47GB
  SGA_TARGET = 0
  shared_pool_size = 5G
  JAVA_POOL_SIZE = 1 G
  LARGE_POOL_SIZE = 0
  db_cache_size = 38G
  
  I'll look into what I have to change. I just wanted to get other opinions since I inherited a wasp nest and need elements good enough before you can change all the settings. All documents, Metalink, etc that you can provide to support a change in these parameters would be great. Thank you.

  Hello

  You can check http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/rcmtunin.htm

  You can use the formula to set the size of the pool. If you do not install the largest basin of the rman uses memory of shared pool which can cause the problem of e/s/execution.

  LARGE_POOL_SIZE = number_of_allocated_channels * (16 MB + (4 * size_of_tape_buffer))

  Hope this will help you.

  Thank you
  Krishna

• network adapters is not responding

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I want to know what I did to cause this problem, but my adapters do not react, it is said that this device does not work because windows cannot load the drivers (code31)

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Code 31: This device does not work properly because Windows cannot load the drivers required for this device
  http://TechNet.Microsoft.com/en-us/library/cc725584 (WS.10) .aspx

  I hope I could help

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• HARD drive external (E :) hangs and then said: "Not responding" when trying to backup.)

  Original title: backup on an external hard drive

  I'm trying to back up my files on an "External" hard drive It's me E: drive as the location, but it just hangs up there says "not responding". I tried to do an "Archive" in the "My Documents" folder, I saw files transfer, however all my names of my files are now blue in 'My documents' whatever that means? What drive letter should go a hard drive 'external '? I should be able to click on that drive and see what is on my external hard drive, but it doesn't "not responding"...

  External drive (E :) will not name until you give him one.  It is possible that the disk has not been formatted yet.

  Open disk management (start > run > diskmgmt.msc > OK).
  You will see something like this:

  

  You will have a line for 'Disk 2' but which shows next to your "disc 1". Please provide ALL information in the "Disk 1" line.

  For example, if you had the image above, the response from you I'm looking for would be:

  Disc 1 - Basic - 186,31 GB - online
  Ghost images (D :) - 93,13 GB NTFS - healthy (active))
  Data backup (E :) - 50,57 Go NTFS - healthy)
  42.61 GB - not assigned

• When stopping down, planner of @backup trying to stop, but then "not responding".

  When stopping down, planner of @backup trying to stop, but then "not responding". What is it? Do I need? If so, how to fix? Otherwise, how to disable?

  Hi Paul Gray TX,.

  1. did you of recent changes on the computer?

  2. What is the finished message, you receive so that closing the computer?

  3 do you have any schedule tasks on the computer?

  Method 1

  Check and make sure that you don't have to schedule tasks defined on the computer during the process of closing.

  How to modify the scheduled tasks in Windows XP

  http://support.Microsoft.com/kb/308671

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  How can I get the "network" icon in the taskbar? The box of 'network' in the bar of tasks and Start Menu Properties; Notification area; System icons, will not respond to what it is.

  Use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to method 3.

  3. for the network icon.

  (B) to activate the icon network - Enable_Network.reg< click="" to="">

  * Don't forget to restart to complete the procedure. ***

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• My "restore from backup" does not end as the screen lock appears

  I got a new iphone with 64Meg and OIS 9.3.3 6 operating system. Before putting in my business phone; I backed up my data on itunes using my PC with Windows 10. As I'm trying to "restore backup" on an iphone same 6, I was unable to do, when to halfway through the download process, the screen lock appears and disconnect the iphone from itunes and the download stops. It seems to be appx 29 minutes for download; but I never got rained only 7 minutes to download completion before the screen is locked or the battery at 100% load indicator disconnect the iphone.

  I have disabled all notifications, deleted my AOL Mail, set the screen saver to "never", off of password, all without success. Help!

  Hello, Franklytex!

  Welcome to the communities of Apple Support and post your first message! Looks like you have a problem to restore your backup from iTunes. I know how important it is that your iPhone can be restored properly! Read this article which has steps for you If your iTunes backup could not be completed or you can not restore from a backup. More precisely:

  Try again after each step

  1. Make sure you have the latest version of iTunes.
  2. Connect your device to your computer with a cable USB, then Select your device in iTunes. If your device does not appear in iTunes, you must correct this problem until you can continue. Or, if you have forgotten your password or your device is off, know what to do.
  3. Turn off your computer and your iPhone, iPad or iPod touch. Then turn on again them.
  4. If you use a Mac, skip this step. If you use a Windows PC and iTunes will not respond or never ends your backup, you may need to to update, edit, disable or uninstall your security software.
  5. If you have multiple computers, try to make a backup on your other Mac or PC. Otherwise, use iCloud for save your device and restore it from your backup to iCloud.
  6. If you see an alert indicating an error has occurred, your backup is corrupt or incompatibleor there is not enough disk space, find your error message below to learn what to do next.
  7. Contact Apple technical support.

  See you soon!

• Uninstalled and reinstalled Firefox new, because the old version was crashing / "not responding." now cannot start new version.

  I have a desktop Windows 7 Home Premium 64-bit. Was using a previous version of Firefox for a while but is has started to run slowly or occasionally crash or better yet show "program does not" or some this verbiage when I started the browser, so I decided to move to a new Firefox. I uninstalled the old version and installed a new one – and I can't start even the browser. The browser window opens with "Restore Session - Mozilla Firefox (not responding)"
  I don't use IE, but that's what I have to do the same after this issue; That's why I can't even look for ir help install the troubleshooting soft...
  Any help would be appreciated.

  Firefox reset function move your old folder settings on your desktop, inside a folder named old data from Firefox. Please keep this record for a few weeks in case you need to recover anything of him.

  If the reset does not help, there are two main variables remaining here: possible corruption in the settings (your profile folder) files that are reported after a reset and possible problems in your Firefox program folder.

  Create a new Firefox profile

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It will also have databases of completely fresh settings and cool a cache folder.

  Out of Firefox and start in the profile using Start Manager > Run (hold the Windows key press R):

  firefox.exe -P
  

  Do not delete anything here.

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Go ahead and click on the button to create a profile, give it a name such as Nov8 and ignore the possibility of changing the location of the folder. Then launch Firefox in the new profile that you have created.

  Until you return to the profile and start-up Manager in your regular profile, your desktop shortcut should launch the new profile.

  Other than not having your settings, it works normally?

  Note: When you return to the Profile Manager, you might be tempted to use the button Delete a profile on your new test profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

  You can replace the Firefox program files without disturbing your settings by using this clean reinstall procedure:

  (1) download a fresh Installer for Firefox 33 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) as appropriate, close Firefox or make sure there is full compliance in the Task Manager.

  (3) to rename the folder (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  It runs?

  Note: Some plugins recently installed can exist only in this OldFirefox file. If it is missing something essential, present in these files:

  • C:\Program Files (x 86) \OldFirefox\Plugins
  • C:\Program Files (x 86) \OldFirefox\browser\plugins

• Does not respond when deleting the Messages caused by ginormous basket

  After a clean install on Windows 8.1, Thunderbird sometimes says "Not responding" after trying to delete e-mails. After a few minutes, he responds, removes the e-mail message, and life is good. This happens not all the time, but often enough to ask why this happens. Y at - it an incompatibility with Windows 8.1? I find it extremely odd that happen all the time, and that it is in fact instead of crashing.

  Re: I didn't plan on messing with Safe Mode, because it is usually have to disable something within the system so that it can work.

  Is a debugging feature and it is simple and fast, but it offers very specific information that can be used to identify problems or refute these questions.

  Test Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode
  Choose to start in "Safe Mode with network.
  If Thunderbird works ok, then there is a problem with an external program that does not work in Windows safe mode.

  If no there is always a problem

  Test Thunderbird safe mode:
  In thunderbird:
  'Help' > 'restart with disabled addons.
  If the problem goes away then the question is an addon.

  Other reasons for a temporary delay in any process could be for example: regular background updates or Thunderbird opening / the use of files large mbox among the many possibilities.
  Here is a link that you could use to help identify what is the cause or deny what does not, cause the issue.

  • http://KB.mozillazine.org/Performance_-_Thunderbird

• Network Monitor does not not on a whim

  I use Network Monitor to months and suddenly that it stops working today, the tab is still there and I checked devtools.netmonitor.enabled and the value is always true. The problem is the button to launch performance analysis does not respond to clicks, in fact even the filters on the bottom (HTML, CSS, HS, XHR) are not working as (by clicking on them normally should at least highlight in blue but now its totally insensitive to the user clicks)

  I would appreciate any help from you guys. Thank you.

  UPDATE: I solved the problem by resetting all values related to netmonitor and the problem goes away. I don't know why, the values are mixed however. That's why I'm scoring this issue as resolved, sorry for wasting space forum.

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes