"network card wireless don't b/c...". »
I have a Satellite A305-S6916, with Vista as an operating system. I'm unable to access the Internet via WiFi or router with internal wireless network card. For now I have usb wireless adapter, but it is heavy.
Receive orange switch for WiFi on the laptop the led lights... However, I am unable to connect at the same time I received a message that says:
"Your wireless network card stopped working b/c a compatible driver is not availablle for this version of windows."
Where can I go to load a compatible driver for Vista? Thanks :)
Hello
First you connect to the computer support page and download the latest drivers for Vista.
Install the drivers.
--------------------
Take the following steps to verify the installation.
Check the Device Manager for the wireless card valid entry.
http://www.ezlan.NET/Win7/net_dm.jpg
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
http://www.ezlan.NET/Win7/net_connection_tcp.jpg
------------------
The wireless card drivers much also install utility wireless of the seller.
Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).
----------------
Make sure you firewall No. preventing / blocks wireless components to join the network.
Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.
If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
party like Hello and NetMagic 3rd network managers can block local traffic too.
---------------------------
Stack TCP/IP work should look like.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
http://www.ezlan.NET/Win7/status-NIC.jpg
Description is the data of the card making.
The physical address is MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
---------------------------------------------------
A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.
Above everything is OK, you must be able to connect to the router.
Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.
If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.
Enable security wireless after you eat to make a functional connection.
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
Want to 6-1100sl: network card wireless 6-1100sl want disappeared
Hi, I bought an Envy6 fantastic 1100sl in 2014. Used only to work with a small charge. However, all of a sudden my (Ralink) wireless card stopped working and out of my system and its peripherals. Now, seeing the wlan led is always RED (also if the airplane mode is off). Tried to remove and reinstall (several times) the driver official of http://support.hp.com/it-it/drivers/selfservice/hp-envy-ultrabook-6-1100/5296040/model/5305952#Z7_30... but it is not worked, and now the only way to use it wireless using an external USB wireless network card.
I'm waiting for a new SSD to accelerate my ultrabook; I will try to do a clean install of windows on my new SSD 10 hoping to operate the integrated Ralink Wireless card in return.
My questions:
I try a trick to revive this material before new clean install?
What can I do if after the clean install the wlan card still does not appear?
Thank you
Salvatore
Hello @cospps,
Thanks for the information!
I understand that you have performed the test hardware on the WLAN Module, and he said that the card was not installed. I understand that you checked the map, to see if it is properly installed. If you're still having problems, then you can consider replacing the WLAN Module. You might want to test the card on another compatible device. I hope this helps.
Kind regards!
-
network card wireless on toshiba satellite 2410-702
Dear Sir.
I have a laptop Toshiba Satellite 2410-702 and I have a problem with the wireless network card. the operating system running on the laptop's home with the service pack 2 for windows xp.
In Control Panel-> system-> hardware-> Device Manager in "Network cards" is not the "wireless network connection". I tried to install it adding a new hardware devices with the drivers I found on cd-rom, but I couldn't manage to install it.
How can I solve this problem?
Thanks in advance,
Best regards
Fulvio Ormas
PS: the drivers for the wireless network card I downloaded from the official website of toshiba are the same as the drivers I have on cdHi coots
I'm not sure but I think that your machine is delivered without wireless card. Did build in one?
There is possibility to expand your laptop with wireless card and in this case, you can download driver. Please be careful with the drivers. Ago on the Toshiba site driver for Wireless LAN card produced by Toshiba.
-
Driver for network card wireless Netgear WN111 with Vista 64 - bit OS.
I have a Gateway GT5644E desktop computer. It has Vista Home Premium 64 - bit OS installed and a PCI-E Fast Ethernet controller Marvell Yukon 88E8039 network card. I have a Netgear WN111 wireless for internet connection adapter.
I downloaded the latest version of the driver, the WN111v2 version 3.0. He lets me run the installation, then it asks me to insert the card in the computer. It detects new hardware and I get the message that it is "adapter detection. Then I get a message "The Netgear WN111v2 adapter is not found."
I also uninstalled this version and tried the driver version 2. Still no luck.
Any ideas how I can get connected?
Thank you!Hello
In this case, I suggest you to check if there is no hardware that optional Windows update on the Microsoft Web site.
http://windowsupdate.Microsoft.com/Check whether the problem is resolved.
If this does not work, let us move forward and follow the installation instructions in the link below to download the 3.0 WN111v2 software version which may help you inresolving the question of installation by n.
http://KB.NETGEAR.com/app/answers/detail/A_ID/12656/related/1
Check whether the problem is resolved.You can communicate with the support of netgear for more information.
http://KB.NETGEAR.com/app/homePlease post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
Satellite Pro M30: I need network card wireless that supports WPA and 54mbits
I'll buy a new adapter wlan... for my toshiba satellite pro M30.
myOne only supports wep and 11 Mbps and I need a faster that supports wpa and 54 Mbps.
Whisch wireless network adapter is the correct?I read in the forums, this ist a bit more complicated because of the bios, chipset and connectors...
could someone tell me what card is ok?Thank you
Hello Michi
It is not easy to give you accurate information, but if your laptop is the Intel Centrino mobile technology you can use of LAN Mini PCI Intel PRO/Wireless 2200BG adapter. I have the same WLAN card and can use WPA and 54mbits data transfer speed.
If you want to be sure, try contacting the Service of your country partner. They should know this for sure.
-
Pavilion G6: Intel AC 7260 network card wireless
I want to change my card Atheros wi - fi with this Intel AC 7260 network.
Can anyone tell my, if I need to update my BIOS for my model to install this card?
This is the 3rd generation i7 and all models without whitelist are generation 4 and longer, if you still have it.
Here are your choices:
● Intel Centrino Wireless - N 2230 802.11b/g/n 2 × 2 WiFi and Bluetooth Combo Adapter 670290-001 Atheros HB125 802.11b/g/n 1 × 1 adapter WiFi (some models only) 675794-001 ● Ralink RT3290LE 802.11 b/g/n 1 x 1 WiFi and Bluetooth 4.0 Combo Adapter 690020-001 ● WiFi Ralink RT5390R 802.11 b/g/n 1 × 1 (some models only) 691415-001
The clearly the best choice, but not as good as you had wished:
Only 2.4 GHz, it is double flow for should provide pretty good range.
Do not shoot the Messenger. The white list wasn't my idea and no one is happier to see her go.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
-
I have an old HP Envy computer of 12 months with a 2230 Intel® Centrino® wireless-N wireless adapter.
In the last 6 months, the PC has suffered sporadic but recurrent problems of WiFi connection with the failure of the connection or drop-outs. The PC connects to the router, but fails to obtain or maintain an IP address. It has been with Intel driver version 15.12.0.6, pilot day February 25, 2014, installed by Windows Update, on June 16, 2014.
When I contacted HP support on January 9, 2015, I have been instructed to download the software from the HP Web site. This driver has an HP publication date of 1 November 2013 and installed the driver version 15.10.0.12 with a release date of June 25, 2013.
Updated Windows ran later that day there and I wanted to install the drivers updated Windows 8.1
- Important update - update the Intel driver for Intel® Centrino® wireless-N 2230 published on 17/10/2013, 2.4 MB
- Optional update - update the Intel driver for Intel® Centrino® wireless-N 2230 published 07/10/2014, 101.9 MB
If Windows Update has been set to automatic the provided HP driver would likely have immediately deleted by Microsoft update.
The Intel Web site offers the 15.14.0.1 or 15.14.0.2 driver version as the last driver for the adapter N-2230 but Intel "recommends obtain you and use the software provided by the manufacturer of your laptop. (even if it's more than a year to date)
It's very complicated to have the latest version on the Intel site, older versions installed by Microsoft Update and even older versions on the HP website.
If the user must install the OEM version, how the user to treat Microsoft Update overwriting the OEM version?
Which driver should be used?
Why didn't the driver software HP Support was updated to resolve known issues with this wireless card driver?
HP would provide only a pilot who has been tested on the device that is installed on a particular type of material.
Intel would release the driver first, but then it would take some time for HP to the test pilot and release it to the public for use on their units. Some customizations can apply in order to get the driver to work on the material.
-
Where can I buy a network card wireless minPCI for a Satellite Pro A30 PSA35E
Hello
Anyone know where I can buy a card pci WLAN for a Satellite pro A30 PSA35E laptop?
I live in England.See you soon
The laptop would support this Kit wireless LAN card: PA3212U-1MPC
It s an Intel Pro 2100 WLan card and it supports the 802. 11b standard. -
Network card wireless upgrade dm4t-1100?
HI -.
I read a few threads asking if a specific card will work in this model, but I'm going to be less accurate. I have a computer dm4t-1100 HP laptop running Windows 7, it is the only Windows machine I have left and one of the reasons why I always use it to resolve WiFi issues with inSSIDer. The problem is the stock WiFi does that 2.4 GHz, and I would like to have a portable device that can run inSSIDer and do 5 GHz.
Y at - it a replacement of WLAN card that will make A/B/G/N 2.4 & 5 GHz? (I'm sure that it's too ask
If there is, can I replace it myself or is there a 'white list' or another problem, I will also have (read some of the threads that indicate this is a problem?).
Are there "generic" cards, can I buy it from Amazon for it, or even only a 'white list' feature I need HP?
Thanks for any help you can offer, I would prefer not to conduct just a USB that I tend to break or lose things like that.
-Bruce
Hi, Bruce:
Here is the link to the service manual for your laptop.
Chapter 3 lists the cards wlan supported with HP part numbers.
http://h10032.www1.HP.com/CTG/manual/c03106715.PDF
I do not believe that the adapter WiFi Atheros AR9285 802.11 a/b/g/n 2 x 2 is a dual card band even though it is listed as such.
The parts store shows as a card bgn.
So, as I see your choice is if you live in the United States...
Broadcom 43224AGN 802.11a/b/g/draft-n WiFi adapter HP Part # 582564-001
Intel® Centrino® Advanced-N + WiMAX 6250 HP part # 619997-001
The only cards that work are those indicated in the maintenance manual and they must have the part number HP on them or won't work, because of the white list of the BIOS.
I recommend buying a used but tested and working one on eBay by questioning by the part number.
They can be had at bargain prices.
-
Network device network implementation network Ethernet card network card wireless
Hello
I can not started my google page when I put myself on tape public sfr wifi then ke until then I had no problem! I do an analysis of microsoft and is telling me that the computer settings are good but not Microsoft does ke. How do I? Pour me finally reconnected in public wifi?
Thank you.
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Pavillionp 6601f: can I put on my windows desktop computer wireless network card 7 HP p6601f
Can I put the network card wireless on my HP model of office p6610f on windows 7 64 bit to get the best wireless connection?
VJP2002, welcome to the forum.
According to the Product Specifications for the computer, it came not with a wireless card installed. However, you can add a. Here is a card that should work for you. It uses the technology of KT (Gigabit). This means that your router must support AC. However, it supports 802.11 a/b/g/n. There are 3 PCI Express x 1 slots on the motherboard.
There are other options, for example, wireless USB adapters. You don't have to open the case and install them.
Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.
-
Satellite Pro A40: MinPCI wireless network card required
Hi all
I would like to put a wireless PCI card in my laptop but don't have a clue what I'm looking for.
Please could someone help me with suggestions, links, recommendations, information or anything that could help me
solve this problemThank you
Hello
One question; You have a Wlan switch on the side of laptops?
If this isn't the case, then you can not upgrade this laptop with the network card wireless minPCI because you would not be able to activate the wireless card.I checked the internet for a few details and it seems the Wi - Fi is available and in my opinion not extensible too.
I think that it s better to use an external USB WiFi key
Good bye
-
Driver required for HP-15af024AU wireless network card
I use the laptop above using Windows 7-32 bit.
I need driver network card wireless with the hardware ID
PCI\VEN_10EC & DEV_B723 & SUBSYS_804C103C.
Experts, please give me the link to what precedes.
Thank you.
Hello
Should be Realtek wlan driver on the following link.
http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72932.exe
Kind regards
DP - K
-
Impossible to activate my Vista wireless network card
I replaced a broken network PCI adapt with a Belkin USB wireless adapter. I installed everything, restarted, and now my computer can't find any networks. I open network connections and tried to repair. When I 'Reset the wireless network adapter' it indicates a problem still exists. As it is said 'Belkin 54 g Wireless USB Network Adapter' knows driver or hardware related issues. I've already updated the driver for the latest driver. When I go into network connections and right click on the connection for Belkin 54 g wireless, I try to activate with no luck. I also try to activate Device Manager with no luck.
I came to the conclusion there is that some conflicts causing the wireless network adapter to not 'activate' or activate. What is the problem?
Hello Brent in Texas.
O what is the status of the wireless network adapter in Device Manager, you see yellow exclamations or the fringe?
The error code indicates that the drivers are not installed for your wireless network card.
You should try to uninstall and reinstall the drivers for your network card wireless instead of updating the drivers. Make sure that you remove the previous version of the driver and install the latest version.
1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
2. expand "network adapters, double-click the entry for the wireless network device.
3. click on the "Driver" tab, click "Uninstall".
4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
5 remove the entries related to the wireless network adapter.Reinstall the driver with your driver CD. After installation, create the connection.
Alternatively, you can try to uninstall the driver from Device Manager, then go to the computer or the device factory site download the latest driver for your network card and install it.
You can read the article that will give you all the steps to troubleshoot network connectivity issues:
http://support.Microsoft.com/kb/936211
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think -
Tecra 8000 sees no PCMCIA network card
I don't get my Belkin network card Wireless PCMCIA connected to my Tecra 8000.
That's all new win 2000, including all updates and I don't know that the pcmcia slot is working very well.The problem during the installation of this card is that the tecra does not see the network card.
Does anyone have an idea how to solve this problem. Network adapter is Belkin F5d7010 54 Mb.THX
Guus
UtrechtTry to change some settings in the BIOS.
In the configuration box, you can set the configuration of device option to all devices.
In addition, in the area PC card, you can try changing the compatible option CCIP or CardBus / 16-bit.Play with these settings and check if a this will allow the card.
PS: Have you installed all the drivers that should be shipped with this card?
Maybe you are looking for
-
FIrefox Installer does not appear in Internet Explorer (Windows 7)
We try to download and install Firefox on a new computer with Windows 7 ZT. We have disabled popups on Internet Explorer. We get the Firefox download screen, but the installer of Firefox (with 'run') does not appear. How to install and down IE?
-
Probems with decoder video tuning MC
My F10 has worked well in the United Kingdom. Now, in the Middle, eating can not give to the TV in the Middle East. Message "Video decoder not installed restart MC" a catch 22 situation. What can I do
-
How to put a video on santa e260?
I bought a santa e260 version v03.01.11a of my friend and I have been trying to put videos on it but I don't know how to convert the files and what im supposed to convert two? or what im supposed to use program? Help, please
-
No sound on media clips on the home page
Someone please offer some advice. I finally got Skype to work. All say the microphone and speaker systems. When I try to play a media clip of my homepage on a story, the video works but there are no sound. I tried everything I can think and am at a
-
Why don't my Lightroom CC "Save as PDF"?
On two Macs, I can't 'Save as PDF' in the sense of Lightroom CC Module. My iMac is running my MacBook Pro Yosemite and El Capitan. When I access the context menu in PDF and select 'Save as PDF' or 'Open PDF in Viewer', nothing happens. The file is no