Tecra 8000 sees no PCMCIA network card

Similar Questions

• How to connect Tecra 8000 to my local network?

  I have tecra 8000 laptop and I want to connect to a network of small size but I can't find any network port on the sides of the laptop... what should I do?
  THX

  Hello

  There is no reason to panic. Please check in electronic stores if you find solution PCMCIA (PCMCIA 10 / 100 M Fast Ethernet LAN Card).

  Good bye

• Tecra 9000: Agere minPCI wireless network card does not work

  Hello

  I can't get my Toshiba Tecra 9000 to work with the Agere wireless Mini-PCI card.
  The Wifi card is 100% working since I've tested in Tecra 9000 my friend.
  The drivers are properly installed.

  But when I switch the equipment on the side of books, the led remains dark. In addition, Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.

  All solutions?

  Tanks.

  > the Agere MiniPCI Wlan Card is not displayed in the XP Control Panel.
  And what is with the Device Manager? The card is listed there?

• Tecra 8000: PC Wireless Card is not recognized

  I am trying to conect my Tecra 8000 to my wireless router, but the card is not recognized when I plug it into the laptop, it is recognized in my satelite. I tried running windows 98 and 2000 now but its made no difference.

  Is there anything else I should do?

  Hello

  What wireless card did you use? Maybe the Tecra 8000 doesn t support this card.
  Check you manual user for the supported cards and compatible.

• Tecra 8000 does not recognizing PCMCIA

  Ive been using my XP loaded Tecra 8000 and connected to the internet via a wireless system using the USB port. It continues to lose signal, Ive just bought an Edimax Cardbus Fast Ethernet PC Card. It fits in the PCMCIA slot and gives me a RJ45 connection directly to the router. The problem is that I mounted the card in the Bay, but it was not recognized by XP. Should I change the bios for the PC to recognize this new material?
  Thank you very much
  Rob

  Hello

  I guess you need the driver.
  Have you installed all the drivers and got all the drivers with this card?

  So note to check this site for card manufacturers;
  http://www.Edimax.com/

  You will find all drivers

• Satellite Pro A40 fell on the wireless network card; Damaged PCMCIA slot

  This morning my Satellite Pro A40 (Celeron 2.6) fell 40 cm. He fell right on the wireless network card that has been inserted. This card is still alive and so is the rest of the laptop, but the PCMCIA location is little damaged. I can insert PC cards almost completely, just the last piece (when the pins are) wrong.

  I removed the cover near the CPU, and there, I could see the inside PCMCIA slot; I could see the main part and the last part where the pins are. That little part as is pushed upward, as you can see in the pictures.

  I think I'd be able to fix myself this PCMCIA slot, but I can't remove it. I removed all the screws on the rear plate, but he is still blocked.

  Pics:

  PCMCIA slot

  The PCMCIA location; on the left, you will see the part with the pins, which is pushed upward. It's also what I see when I look at the pins in the PCMCIA slot. as they are pushed down, but I don't think they are folded.

  Wireless network card

  Wireless network card; It is a little damaged but it still works.

  Does anyone have an idea how I can remove the back plate, or another way to remove the PCMCIA slot and fix it?

  Hi Steve

  Well, I can give t well you not answer how you can just remove the PCMCIA slot.
  There are a lot of screws and to my knowledge, it is necessary to remove all covers and screws that are placed at the bottom of the unit and inside under the keyboard.
  Please check this specific device. Perhaps you have overlooked a few screws.

  But if it is impossible to remove the PCMCIA slot of the unit, I recommend to ask the service partner for a detailed instruction.

  Good luck

  Good bye

• Tecra S1: Should what type of wireless network card I?

  Hello. I do a new install of XP, and I don't have the CD that came with the computer. I have before, but have not been able to get the wireless or bluetooth to work. I need to know what type of wireless card I have...
  Tecra S1 model number: PT831A - 67CS8

  can anyone help?

  Thank you
  -mat

  Hello

  As far as I know that the Tecra S1 has no card network wireless not installed, but you can improve it with a minPCI wireless network card.
  The drivers needed, you must download it from the page of the Toshiba driver or drivers will come with a wireless network card.
  Also the Bluetooth is an option on this unit.

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• Need driver for PC or TP04GMV561 - Tecra 8000 advanced card

  I just rebuilt a Tecra 8000 with Win98SE and now need the drivers for the Advanced PC TP04GMV561 card which I can't find on the web.

  Thank you

  Chris

  Hello Chris

  I'm not 100% sure but I assume that you need a modem driver for your device. Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Chose your device and you will find all the drivers you need.

  Good luck!

• Need new card XIRCOM dongel for Tecra 8000

  Hello
  I HAVE AN ETH212 OF CABLE OF XIRCOM THAT BROKE. I CAN'T FIND ONE ON EBAY BUT MANY OTHERS.

  CAN YOU TELL WHERE ONE SHOULD I BUY?
  Thank you
  FRANK

  I HAVE A TECRA 8000

  Hello

  Looking for some online retailers that offer these cables?
  I typed in the google search form and surprise, surprise XIRCOM CABLE ETH212 :D

  I found this site that offers different parts Xircom:
  http://www.73.com/specs/ya132.shtml

• Tecra 8000, linux & ethernet & pnp

  Hello

  I am trying to install Linux on a Toshiba Tecra 8000. The problem is with a chipset Realtek ethernet PCMCIA card (module: 8139too), which is recognized, but the network is unusable. I always get an error of SIOCSFFLAGS and assigned interruption is 0, which means that it has failed. I have read many times that I have to disable plug-and-play, but there is no choice when I start with a floppy and run the TSETUP. EXE. Y at - it an alternative to this? Do you have any other clues?

  Thanks, Thomas

  Hello

  Perhaps the following site will help you solve the problem.

  Here are 2 official linux Toshiba sites and there are also some tips.

  http://newsletter.toshiba-tro.de/main/index.html

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  PS: You can also enter the BIOS if you press the ESC key immediately after lighting NB!

  Goodbye, Meier

• Tecra 8000 TV out when it is docked

  The docking station for the doen't Tecra8000 replicate the TVout connector, but I have a cable to right angle that matches the TV normal port when connected and allows the cable out the host unit. TV connector normally output is disabled when it is docked and is there a setting in the registry or something in 98SE to re - activate?

  I connect my Tecra to a TV to watch DivX movies on the big screen, with the audio goes to my stereo, but I need to use the device with the Replicator, because the server containing my video files on a network, so I need the capacity of the network. I COULD use a network adapter, but then that beats the purpose of a docking station with the LAN!

  Retro Hi

  I'm a bit confused. As much as I know some Tecra 8000 have no LAN card. If your camera has card LAN and LAN port why you n t plug it directly into the TV and LAN without Port Replicator?

  I'm not sure if the port is disabled, but you can test if you can 100%. If there is no success, you must use the PCMCIA network adapter.

  Good bye

• Tecra 8000 and broadband connection

  Hi all

  I recently asked to watch Tecra 8000 a friends (PII 233) and give it a bit of an update... Don't know why the most I've ever done, is to add a few small components in my PC at home!

  My question is - is this possible for a connection broadband to be put in place - I looked all over the laptop, but don't find nothing which would suggest it is possible.
  (Also what other improvements should be can) watching us.

  Sorry for the noobness, but any help is greatly appreciated.

  Thank you

  Ben

  Wow this is really an oldie
  Broadband do you mean the LAN port?

  As far as I know that the Tecra 8000 was not equipped with LAN port.
  It s really amazing but it is a fact

  However, if you want to use LAN then I advise you to buy a PCMCIA (Cardbus 32-bit) LAN card that would be allows to connect the Tecra 8000 to LAN.

  See you soon

• Tecra 8000: No memory available to connect with area map PC

  I have a Tecra 8000 running Win98 SE and use a card PCMCIA 3Com for my Internet connection. I was troubleshooting my computer on another issue and in the process disabled Cardbus PCMCIA Toshiba ToPIC controllers. After you have enabled these again once I am more able to communicate with the PC card and so unable to connect to the Internet.

  Card troubleshooting agent PC States: "Windows is not able to identify or use the inserted PC card device because there is no available memory area to connect with this device. You need to do an area memory available before this device can be used. Check the CONFIGURATION of your computer. A memory manager that is excluding the regions of superior memory between A000 and FFFF in the SYS file '.

  My Cardbus controllers are defined as follows:
  1 memory range - 0c 000000 - 0C000FFF
  2 memory range - 001000 0c - 0C001FFF

  My PC Card (PCMCIA) properties are as follows:
  Card services shared memory:
  Start 000c 0000
  End 00FFFFFF
  Length 00001000

  While the PC Card Modem is recognized at the Port, it can be communicated with and error message is shown as follows:

  ' Error 666: the modem is not plugged in or is out of service. "Connect a modem to your computer and try again.

  When I run the Diagnostics on the Modem does not respond to the exception of the following:

  "' Open Comm: cannot open port"

  Any help or advice will be appreciated.

  Have you tried to uninstall the Cardbus drivers? Not sure about the location in Win98 (in XP it is in Device Manager), go to "PCMCIA adapters" and uninstall all entries in controller.

  Reboot and Win98 will perform his routine "new hardware found". This is going to re - install drivers and with a bit of luck should solve your problem.

• Tecra 8000 - question on wireless

  Hello

  I have a laptop Toshiba Tecra 8000. I want to connect to broadband wireless set up in my house. Can someone please advise me as to what the hardware needs of my machine to allow me to do this? Do I need a wireless card? Also I would be grateful any recommendation for exact hardware products to buy - to ensure that they are compatible with my device.

  Thank you very much.

  Hello

  I agree with the previous user. For your good old classic, the best solution is to use a PCMCIA WLAN card. You can find many different products on the market, and the best thing you can do is to talk with your local dealer. Inform you about all the products. I hope that you will choose the right one.